Low pressure pattern pressure reducing valve with flanged connections, D15NP
Pressure reducing valves of this type protect installations against excessive pressure from the supply. They can be used for industrial or commercial applications within the range of their specification. By installing a pressure reducing valve, pressurisation damage is avoided and water consumption is reduced. The set pressure is also maintained constant, even when there is wide inlet pressure fluctuation. Reduction of the operating pressure and maintaining it at a constant level minimizes flow noise in the installation.
Media
Water, compressed air and nitrogen in
consideration of valid standards (e.g.
DIN EN 12502)
Body material
cast iron GG25
Spring bonnet material
metal
Body finishing
powder coating
Port connection type
flanges
Max. media temperature
70 oC
Static pressure
PN16
Pressure setpoint range
0,2 ... 2 bar
Balanced seat design
yes
Additional description
•
Non-rising stem for setting outlet pressure and position indicator on spring bonnet (except for DN 200 mm)
•
The adjustment spring is not in contact with the potable
water
•
With inlet and outlet pressure gauge (DN 80 - DN 150) or with outlet pressure gauge (DN 50, DN 65, DN 200)
•
Powder coated inside and outside - Powder used is physiologically and toxicologically safe
