/DP/

Honeywell 2 Line Display Panels, DP

The Display Panel enables the user to view and adjust selected parameters within an IQ22x controller. It provides all the facilities necessary for the operation of a stand-alone building control system. Four programmable buttons make commonly used values available by single key selection. The Display Panel is an option which may be integrally mounted in an IQ22x controller (DP
The integral 2 line display panel is only available with IQ22x controllers eg. IQ221/UNB/DP/230
2 x 40 character back-lit display
4 programmable buttons
Allows monitoring and adjustment of plant parameters, occupation times and calendars
Allows viewing of controller alarm log
Model: integral to IQ22x


030000406

Honeywell Main, outside compensated temperature controller heating/burner/DHWS, RS10
Accessories

Adapter for DRK mixing valves AT-DRK



030000497

Honeywell Main, outside compensated temperature controller heating/burner/DHWS, RS10
Accessories

Adapter for ZRK mixing valves AT-ZRK



0903403

Honeywell Two-way control valve PN16, threaded connections DN 15/25, V5077B


Adapter ring



14004406-124/U

Honeywell Pneumatic room humidity controller, HP970


Cover with R.H. scale



14004406-300

Honeywell Pneumatic room humidity controller, HP970


Cover without scale



201052A

Honeywell Damper actuator 4/8 Nm, ML6161E ML6174E ML6661E ML6674E ML7161E ML7174E
Accessories

Single auxiliary switch, 24V~, 50 VA, IP00



201052B

Honeywell Damper actuator 4/8 Nm, ML6161E ML6174E ML6661E ML6674E ML7161E ML7174E
Accessories

Double auxiliary switch, 24V~, 50 VA, IP00



205617

Honeywell Damper actuator 6 Nm spring return, ML7285E1016
Accessories

Hub insert for 18..19 mm round/square shafts



205685

Honeywell Damper actuator 6 Nm spring return, ML7285E1016
Accessories

Crank arm accessory



205753

Honeywell Damper actuator 6 Nm spring return, ML7285E1016
Accessories

Hub insert for 9..10 mm round/square shafts



205758

Honeywell Damper actuator 6 Nm spring return, ML7285E1016
Accessories

Hub insert for 13..16 mm round/square shafts



205820A

Honeywell Damper actuator 6 Nm spring return, ML7285E1016
Accessories

3 point mounting kit



205830A

Honeywell Damper actuator 4/8 Nm, ML6161E ML6174E ML6661E ML6674E ML7161E ML7174E
Accessories

Crank arm accessory



205850B

Honeywell Damper actuator 6 Nm spring return, ML7285E1016
Accessories

Stroke limiter assembly



205870

Honeywell Damper actuator 6 Nm spring return, ML7285E1016
Accessories

Crank arm kit with 25 mm adapter



205880

Honeywell Damper actuator 6 Nm spring return, ML7285E1016
Accessories

25 mm shaft adapter kit



209541B

Honeywell LonMark distributed I/O modules for either inputs or outputs, XFL

LonMark certified distributed input/output modules. For enhancement of I/O capability of Excel 50, Excel 500 (XC5010C, XCL5010), or 3rd party controllers in open LON systems.
For installation cost savings in cabinets with many I/O's.
Modular concept with removable electronic module, manual disconnector and manual override modules.
One terminal per signal plus auxiliary terminals.
Configuration of I/O modules is supported by an LNS plug-in.
Cabinet, DIN-rail mounting.

Accessories
Product description: LON termination module (FTT10) bus


24400373-003

Honeywell Air duct absolute humidity sensor, SSP129
Accessories

Replacement element



4074ENJ

Honeywell Damper actuator 4/8 Nm, ML6161E ML6174E ML6661E ML6674E ML7161E ML7174E
Accessories

Stroke limiter assembly



42000361-001

Honeywell Air/liquid thermostat 24Vac, with proportional output, T991
Accessories

Copper well PN10, R1/2



42000361-002

Honeywell Air/liquid thermostat 24Vac, with proportional output, T991
Accessories

Steel well PN16, R1/2



43191679-001

Honeywell CentraLine Linear Actuator 20 mm 1800 N, CLLA20 CLLA38
Feedback potentiometers for 3-pt 24 V models

Potentiometer 220/135 ohm operating range, for 20 mm models



43191679-002

Honeywell CentraLine Linear Actuator 20 mm 1800 N, CLLA20 CLLA38
Feedback potentiometers for 3-pt 24 V models

Potentiometer 220/135 ohm operating range, for 38 mm models



43191679-007

Honeywell CentraLine Linear Actuator 20 mm 1800 N, CLLA20 CLLA38
Feedback potentiometers for 3-pt 24 V models

Potentiometer 10 kohm operating range, for 20 mm models



43191679-011

Honeywell CentraLine Linear Actuator 20 mm 600 N, CLLA20
Feedback potentiometers for 3-pt models

Potentiometer 10 kohm, operating range



43191679-012

Honeywell CentraLine Linear Actuator 20 mm 600 N, CLLA20
Feedback potentiometers for 3-pt models

Potentiometer 220 ohm, operating range



43191680-002

Honeywell CentraLine Linear Actuator 20 mm 1800 N, CLLA20 CLLA38
Auxiliary switches ( 250 V, 10 A)

2 adjustable SPDT switches



43191680-005

Honeywell CentraLine Linear Actuator 20 mm 600 N, CLLA20
Auxiliary switches ( 250 V, 10 A)

2 adjustable SPDT switches for 3-pt control models



43191680-205

Honeywell CentraLine Linear Actuator 20 mm 600 N, CLLA20
Auxiliary switches ( 250 V, 10 A)

2 adjustable SPDT switches for 0/2..10 V control models



43193862-001

Honeywell Temperature controller, 1 control output, Micronik200, R7426A
Accessories

Front panel mounting frame



43196000-001

Honeywell CentraLine Linear Actuator 20 mm 1800 N, CLLA20 CLLA38
High temperature kits for:

CLVT2W..P16 CLVT3W..P16 DN15..50; CLVF2W..P16 CLVF3W..P16 CLVF3W..P6 DN15..32



43196000-002

Honeywell CentraLine Linear Actuator 20 mm 1800 N, CLLA20 CLLA38
High temperature kits for:

CLVF2W..P16 CLVF3W..P16 CLVF3W..P6 DN40..80



43196000-038

Honeywell CentraLine Linear Actuator 20 mm 1800 N, CLLA20 CLLA38
High temperature kits for:

CLVF2W..P16 CLVF3W..P16 DN100..150



4DIX/24VAC

Honeywell Input Modules, 4DIX 4SIM IIM

The Digital Input Expander allows 4 volt free inputs to be monitored by a single analogue input channel. The resultant analogue value can be decoded by the A to D Function Module in an IQ controller to produce internal digital status bits for alarm monitoring or other status input applications. A pin header allows quick connection to a 4SIM which provides switched mains voltage isolation for applications where volt free contacts are not available.
The Four Switched Input Isolation Module converts 4 separate, 240Vac/ 110Vac inputs, (or 24 Vac/dc inputs) to fully isolated logic outputs. Three output configurations are possible: 1) Four separate outputs for connection to IQ controller digital inputs. 2) Any of the 4 inputs can be link selected via logical "OR" function to a common output for a connection to a single IQ controller digital input. 3) A pin header and ribbon cable allows quick connection to a 4DIX module which enables the 4 inputs to be monitored by a single analogue input channel on a IQ controller.
The Input Isolation Module (IIM) provides DC isolation from ground for externally powered sensors with either 4-20mA or 0-5V output
Standard DIN rail mounting.
Rising cage clamp terminals.


Product description: 4 Digital Input Expander


4SIM/24

Honeywell Input Modules, 4DIX 4SIM IIM

The Digital Input Expander allows 4 volt free inputs to be monitored by a single analogue input channel. The resultant analogue value can be decoded by the A to D Function Module in an IQ controller to produce internal digital status bits for alarm monitoring or other status input applications. A pin header allows quick connection to a 4SIM which provides switched mains voltage isolation for applications where volt free contacts are not available.
The Four Switched Input Isolation Module converts 4 separate, 240Vac/ 110Vac inputs, (or 24 Vac/dc inputs) to fully isolated logic outputs. Three output configurations are possible: 1) Four separate outputs for connection to IQ controller digital inputs. 2) Any of the 4 inputs can be link selected via logical "OR" function to a common output for a connection to a single IQ controller digital input. 3) A pin header and ribbon cable allows quick connection to a 4DIX module which enables the 4 inputs to be monitored by a single analogue input channel on a IQ controller.
The Input Isolation Module (IIM) provides DC isolation from ground for externally powered sensors with either 4-20mA or 0-5V output
Standard DIN rail mounting.
Rising cage clamp terminals.


Product description: 4 Switched Input Isolation Module; 24 Vac/dc inputs


4SIM/240

Honeywell Input Modules, 4DIX 4SIM IIM

The Digital Input Expander allows 4 volt free inputs to be monitored by a single analogue input channel. The resultant analogue value can be decoded by the A to D Function Module in an IQ controller to produce internal digital status bits for alarm monitoring or other status input applications. A pin header allows quick connection to a 4SIM which provides switched mains voltage isolation for applications where volt free contacts are not available.
The Four Switched Input Isolation Module converts 4 separate, 240Vac/ 110Vac inputs, (or 24 Vac/dc inputs) to fully isolated logic outputs. Three output configurations are possible: 1) Four separate outputs for connection to IQ controller digital inputs. 2) Any of the 4 inputs can be link selected via logical "OR" function to a common output for a connection to a single IQ controller digital input. 3) A pin header and ribbon cable allows quick connection to a 4DIX module which enables the 4 inputs to be monitored by a single analogue input channel on a IQ controller.
The Input Isolation Module (IIM) provides DC isolation from ground for externally powered sensors with either 4-20mA or 0-5V output
Standard DIN rail mounting.
Rising cage clamp terminals.


Product description: 4 Switched Input Isolation Module; 240Vac/ 110Vac inputs


916MDS

Honeywell Mobile Display Software, 916MDS

The 916 runs on a Microsoft Pocket PC, providing an interface to the IQ system enabling monitoring and adjustment of parameters within IQ and IQL controllers. It can be connected to the IQ network via a standard network connection (local supervisor port or CNC2), via a modem, or over Ethernet. A GSM phone may be used instead of a modem.
Access to parameters in IQ, and IQL controllers
Simple adjustment of module parameters
Graphs
Display of alarms
GSM compatibility
Product description: 916 Mobile Display Software; Pocket PC Based


963L/SEC/CD

Honeywell 963 Secure, 963L 963S

963 Secure assists with compliance to FDA regulation 21 CFR Part 11: 963 Secure has a number of security features that provide compliance with the American pharmaceutical bodies regulation 21 CFR Part 11. 963 Secure provides maximum protection for the data it stores, and the system it is controlling. 963 Secure imposes a strong password regime, which requires the user to regularly change their password to prevent it becoming known to others.


Model: Secure
Serial comm.: no
Comments: stand alone


963L/SEC/CD/TRAIN

Honeywell 963 Secure, 963L 963S

963 Secure assists with compliance to FDA regulation 21 CFR Part 11: 963 Secure has a number of security features that provide compliance with the American pharmaceutical bodies regulation 21 CFR Part 11. 963 Secure provides maximum protection for the data it stores, and the system it is controlling. 963 Secure imposes a strong password regime, which requires the user to regularly change their password to prevent it becoming known to others.

With 2 day Secure operator training course
Model: Secure with Training
Serial comm.: no
Comments: stand alone


963L/SEC/LNC2

Honeywell 963 Secure, 963L 963S

963 Secure assists with compliance to FDA regulation 21 CFR Part 11: 963 Secure has a number of security features that provide compliance with the American pharmaceutical bodies regulation 21 CFR Part 11. 963 Secure provides maximum protection for the data it stores, and the system it is controlling. 963 Secure imposes a strong password regime, which requires the user to regularly change their password to prevent it becoming known to others.


Model: Secure
Serial comm.: LNC2
Comments: stand alone


963L/SEC/LNC2/TRAIN

Honeywell 963 Secure, 963L 963S

963 Secure assists with compliance to FDA regulation 21 CFR Part 11: 963 Secure has a number of security features that provide compliance with the American pharmaceutical bodies regulation 21 CFR Part 11. 963 Secure provides maximum protection for the data it stores, and the system it is controlling. 963 Secure imposes a strong password regime, which requires the user to regularly change their password to prevent it becoming known to others.

With 2 day Secure operator training course
Model: Secure with Training
Serial comm.: LNC2
Comments: stand alone


963L/SEC/NBOX/CNC2

Honeywell 963 Secure, 963L 963S

963 Secure assists with compliance to FDA regulation 21 CFR Part 11: 963 Secure has a number of security features that provide compliance with the American pharmaceutical bodies regulation 21 CFR Part 11. 963 Secure provides maximum protection for the data it stores, and the system it is controlling. 963 Secure imposes a strong password regime, which requires the user to regularly change their password to prevent it becoming known to others.


Model: Secure
Serial comm.: NBOX/CNC2
Comments: stand alone


963L/SEC/NBOX/CNC2/TRAIN

Honeywell 963 Secure, 963L 963S

963 Secure assists with compliance to FDA regulation 21 CFR Part 11: 963 Secure has a number of security features that provide compliance with the American pharmaceutical bodies regulation 21 CFR Part 11. 963 Secure provides maximum protection for the data it stores, and the system it is controlling. 963 Secure imposes a strong password regime, which requires the user to regularly change their password to prevent it becoming known to others.

With 2 day Secure operator training course
Model: Secure with Training
Serial comm.: NBOX/CNC2
Comments: stand alone


963L/SEC/UP/963S/SEC/3USER

Honeywell 963 Secure, 963L 963S
Upgrades

Upgrade from 963 Secure Lite to 963 Secure Server (with 3 client licences)



963L/SNMP/UP/963S/SNMP/3USER

Honeywell 963 SNMP
Upgrades

Upgrade from 963L/SNMP to 963S/SNMP with 3 client licences



963L/UP/963L/SNMP

Honeywell 963 SNMP
Upgrades

Upgrade from 963L to 963L/SNMP



963S/SEC/CD/3USER

Honeywell 963 Secure, 963L 963S

963 Secure assists with compliance to FDA regulation 21 CFR Part 11: 963 Secure has a number of security features that provide compliance with the American pharmaceutical bodies regulation 21 CFR Part 11. 963 Secure provides maximum protection for the data it stores, and the system it is controlling. 963 Secure imposes a strong password regime, which requires the user to regularly change their password to prevent it becoming known to others.


Model: Secure
Serial comm.: no
Comments: web server 3 user


963S/SEC/CD/3USER/TRAIN

Honeywell 963 Secure, 963L 963S

963 Secure assists with compliance to FDA regulation 21 CFR Part 11: 963 Secure has a number of security features that provide compliance with the American pharmaceutical bodies regulation 21 CFR Part 11. 963 Secure provides maximum protection for the data it stores, and the system it is controlling. 963 Secure imposes a strong password regime, which requires the user to regularly change their password to prevent it becoming known to others.

With 2 day Secure operator training course
Model: Secure with Training
Serial comm.: no
Comments: web server 3 user


963S/SEC/LNC2/3USER

Honeywell 963 Secure, 963L 963S

963 Secure assists with compliance to FDA regulation 21 CFR Part 11: 963 Secure has a number of security features that provide compliance with the American pharmaceutical bodies regulation 21 CFR Part 11. 963 Secure provides maximum protection for the data it stores, and the system it is controlling. 963 Secure imposes a strong password regime, which requires the user to regularly change their password to prevent it becoming known to others.


Model: Secure
Serial comm.: LNC2
Comments: web server 3 user


963S/SEC/LNC2/3USER/TRAIN

Honeywell 963 Secure, 963L 963S

963 Secure assists with compliance to FDA regulation 21 CFR Part 11: 963 Secure has a number of security features that provide compliance with the American pharmaceutical bodies regulation 21 CFR Part 11. 963 Secure provides maximum protection for the data it stores, and the system it is controlling. 963 Secure imposes a strong password regime, which requires the user to regularly change their password to prevent it becoming known to others.

With 2 day Secure operator training course
Model: Secure with Training
Serial comm.: LNC2
Comments: web server 3 user


963S/SEC/NBOX/CNC2/3USER

Honeywell 963 Secure, 963L 963S

963 Secure assists with compliance to FDA regulation 21 CFR Part 11: 963 Secure has a number of security features that provide compliance with the American pharmaceutical bodies regulation 21 CFR Part 11. 963 Secure provides maximum protection for the data it stores, and the system it is controlling. 963 Secure imposes a strong password regime, which requires the user to regularly change their password to prevent it becoming known to others.


Model: Secure
Serial comm.: NBOX/CNC2
Comments: web server 3 user


963S/SEC/NBOX/CNC2/3USER/TRAIN

Honeywell 963 Secure, 963L 963S

963 Secure assists with compliance to FDA regulation 21 CFR Part 11: 963 Secure has a number of security features that provide compliance with the American pharmaceutical bodies regulation 21 CFR Part 11. 963 Secure provides maximum protection for the data it stores, and the system it is controlling. 963 Secure imposes a strong password regime, which requires the user to regularly change their password to prevent it becoming known to others.

With 2 day Secure operator training course
Model: Secure with Training
Serial comm.: NBOX/CNC2
Comments: web server 3 user


963S/SEC/UP/nn/xxUSER

Honeywell 963 Secure, 963L 963S
Upgrades

963 Secure Server additional client licences (nn=existing number xx=required number)



963S/SNMP/CD/3USER

Honeywell 963 SNMP

In addition to the standard features of the 963 Supervisor, 963 SNMP enables the retransmission of business effecting alarms from a Trend system to IT monitoring systems, thereby reducing the down time on the IT data operations.
Model: SNMP
Comments: web server 3 user


963S/SNMP/UP/nn/xx/USER

Honeywell 963 SNMP
Upgrades

Additional Client licences (nn=existing number xx=required number)



963S/UP/963S/SNMP/3USER

Honeywell 963 SNMP
Upgrades

Upgrade from 963S to 963S/SNMP



A7116.0050

Honeywell Damper actuator 5/10 Nm, ML6161E ML6661E ML7161E ML6174E ML6674E ML7174E
Accessories for ML7174E3013, ML7174E3021

Linkage for connection to the valve series V5433, V5442



ABE10

Honeywell Solenoid valves for liquid medium (ABE)

The 2/2-way valves of the ABE-series are suitable for general applications and is not dependent operationally on a specific minimum differential pressure, and right through to maximum pressure. They are ideal choice for installation in situations where differential pressure fluctuate greatly and are not possible to determine precisely in advance. They are suitable for neutral liquids, such as water, hydraulic oil, oils and fats without additives.
Valve application: liquid
Materials: Casing: brass Internal parts: stainless steel Membrane: Perbunan
Media temp.: -10...80C
Ambient temperature: -10...55C
Operating mode: normally closed
Power supply: 230V 50Hz
Certificates: test diff
Working range: 0...10bar


DN size: 10mm
Kvs value: 1.9
Connections: G3/8


ABE13

Honeywell Solenoid valves for liquid medium (ABE)

The 2/2-way valves of the ABE-series are suitable for general applications and is not dependent operationally on a specific minimum differential pressure, and right through to maximum pressure. They are ideal choice for installation in situations where differential pressure fluctuate greatly and are not possible to determine precisely in advance. They are suitable for neutral liquids, such as water, hydraulic oil, oils and fats without additives.
Valve application: liquid
Materials: Casing: brass Internal parts: stainless steel Membrane: Perbunan
Media temp.: -10...80C
Ambient temperature: -10...55C
Operating mode: normally closed
Power supply: 230V 50Hz
Certificates: test diff
Working range: 0...10bar


DN size: 13mm
Kvs value: 3.6
Connections: G1/2


ABE20

Honeywell Solenoid valves for liquid medium (ABE)

The 2/2-way valves of the ABE-series are suitable for general applications and is not dependent operationally on a specific minimum differential pressure, and right through to maximum pressure. They are ideal choice for installation in situations where differential pressure fluctuate greatly and are not possible to determine precisely in advance. They are suitable for neutral liquids, such as water, hydraulic oil, oils and fats without additives.
Valve application: liquid
Materials: Casing: brass Internal parts: stainless steel Membrane: Perbunan
Media temp.: -10...80C
Ambient temperature: -10...55C
Operating mode: normally closed
Power supply: 230V 50Hz
Certificates: test diff
Working range: 0...10bar


DN size: 20mm
Kvs value: 8.3
Connections: G3/4


ABE25

Honeywell Solenoid valves for liquid medium (ABE)

The 2/2-way valves of the ABE-series are suitable for general applications and is not dependent operationally on a specific minimum differential pressure, and right through to maximum pressure. They are ideal choice for installation in situations where differential pressure fluctuate greatly and are not possible to determine precisely in advance. They are suitable for neutral liquids, such as water, hydraulic oil, oils and fats without additives.
Valve application: liquid
Materials: Casing: brass Internal parts: stainless steel Membrane: Perbunan
Media temp.: -10...80C
Ambient temperature: -10...55C
Operating mode: normally closed
Power supply: 230V 50Hz
Certificates: test diff
Working range: 0...10bar


DN size: 25mm
Kvs value: 11
Connections: G1


ABE32

Honeywell Solenoid valves for liquid medium (ABE)

The 2/2-way valves of the ABE-series are suitable for general applications and is not dependent operationally on a specific minimum differential pressure, and right through to maximum pressure. They are ideal choice for installation in situations where differential pressure fluctuate greatly and are not possible to determine precisely in advance. They are suitable for neutral liquids, such as water, hydraulic oil, oils and fats without additives.
Valve application: liquid
Materials: Casing: brass Internal parts: stainless steel Membrane: Perbunan
Media temp.: -10...80C
Ambient temperature: -10...55C
Operating mode: normally closed
Power supply: 230V 50Hz
Certificates: test diff
Working range: 0...10bar


DN size: 25mm
Kvs value: 11
Connections: G1 1/4


ABE40

Honeywell Solenoid valves for liquid medium (ABE)

The 2/2-way valves of the ABE-series are suitable for general applications and is not dependent operationally on a specific minimum differential pressure, and right through to maximum pressure. They are ideal choice for installation in situations where differential pressure fluctuate greatly and are not possible to determine precisely in advance. They are suitable for neutral liquids, such as water, hydraulic oil, oils and fats without additives.
Valve application: liquid
Materials: Casing: brass Internal parts: stainless steel Membrane: Perbunan
Media temp.: -10...80C
Ambient temperature: -10...55C
Operating mode: normally closed
Power supply: 230V 50Hz
Certificates: test diff
Working range: 0...10bar


DN size: 40mm
Kvs value: 30
Connections: G1 1/2


ABE50

Honeywell Solenoid valves for liquid medium (ABE)

The 2/2-way valves of the ABE-series are suitable for general applications and is not dependent operationally on a specific minimum differential pressure, and right through to maximum pressure. They are ideal choice for installation in situations where differential pressure fluctuate greatly and are not possible to determine precisely in advance. They are suitable for neutral liquids, such as water, hydraulic oil, oils and fats without additives.
Valve application: liquid
Materials: Casing: brass Internal parts: stainless steel Membrane: Perbunan
Media temp.: -10...80C
Ambient temperature: -10...55C
Operating mode: normally closed
Power supply: 230V 50Hz
Certificates: test diff
Working range: 0...10bar


DN size: 40mm
Kvs value: 30
Connections: G2


AC-15TF

Honeywell CentraLine Valve Threaded 2-way PN16, CLVT2
Accessories

Internal threaded fitting for DN15 valve pipe size Rp 1/2"



AC-20TF

Honeywell CentraLine Valve Threaded 2-way PN16, CLVT2
Accessories

Internal threaded fitting for DN20 valve pipe size Rp 3/4"



AC-25TF

Honeywell CentraLine Valve Threaded 2-way PN16, CLVT2
Accessories

Internal threaded fitting for DN25 valve pipe size Rp 1"



AC-32TF

Honeywell CentraLine Valve Threaded 2-way PN16, CLVT2
Accessories

Internal threaded fitting for DN32 valve pipe size Rp 1 1/4"



AC-40TF

Honeywell CentraLine Valve Threaded 2-way PN16, CLVT2
Accessories

Internal threaded fitting for DN40 valve pipe size Rp 1 1/2"



AC-50TF

Honeywell CentraLine Valve Threaded 2-way PN16, CLVT2
Accessories

Internal threaded fitting for DN50 valve pipe size Rp 2"



ACC A-AL06-P-SW

Honeywell Actuator Linear 600N 20mm, AL0620
Accessories

Auxiliary switches for AL0620-P.. series valve actuators



ACC/24VAC

Honeywell IQ21x Controllers
Accessories

230/24 Vac, 24 VA, transformer for IQView4, with surface mounting lugs, and through earth (ground) connection



ACC/24VAC

Honeywell IQ3 Integration Controllers
Accessories

230/24 Vac, 24 VA, transformer for IQView4, with surface mounting lugs, and through earth (ground) connection



ACC/24VAC

Honeywell IQ22x Controllers
Accessories

230/24 Vac, 24 VA, transformer for IQView4, with surface mounting lugs, and through earth (ground) connection



ACC/24VAC

Honeywell IQ3 BACnet Integration Controllers
Accessories

230/24 Vac, 24 VA, transformer for IQView4, with surface mounting lugs, and through earth (ground) connection



ACC/DF

Honeywell Plant Temperature Sensors (Pt100)
Accessories

Duct flange for the TP/TI



ACC/EM3/ODIN/PANELKIT

Honeywell Electricity Meter, Three Phase Pulse, EM3
Accessories

Optional mounting kit for panel mounting of EM3/ODIN meters



ACC/FC

Honeywell Frost protection thermostats, T/FS
Accessories

Optional fixing clips for T/FS



ACC/NXL/FILTER/FR2-3

Honeywell Microdrives IP20, NXL000
Accessories

Filter for frame sizes MF2 or MF3



ACC/NXL/RS232PC

Honeywell Microdrives IP20, NXL000
Accessories

NXL to PC cable (also requires use of RS232 adaptor below)



ACC/RS232/ADAPTOR

Honeywell Microdrives IP20, NXL000
Accessories

NXL RS232 adaptor for use with NXL to PC cable



ACC/SIRIO/PANELKIT

Honeywell Electricity Meter, Three Phase, Multi Parameter, EM-MPO
Accessories

Optional panel mounting kit for EM-MPO/SIRIO



ACC/SMBOX/16/10

Honeywell IQ21x Controllers
Accessories

16mm surface mount box for RD, Box of 10



ACC/SP

Honeywell Pressure, Current sensor, Liquid
Accessories

Steam Pigtail for use with steam or water above 85 oC



ACC/STAR3DIN/PANELKIT

Honeywell Electricity Meter, Three Phase, Multi Parameter, EM-MPO
Accessories

Optional panel mounting kit for EM-MPO/STAR3DIN



ACC/UF

Honeywell Plant Temperature Sensors (Pt100)
Accessories

Universal fixing clip (retrofit into existing pockets)



ACC/VSD2H/DOOR MOUNTING

Honeywell VSD2H Variable Speed Drivers for HVAC applications, 1,1..160kW, IP21/IP54,
Accessories

VSD2H Door panel kit



ACC/VSD2H/GRAPHIC DISPLAY

Honeywell VSD2H Variable Speed Drivers for HVAC applications, 1,1..160kW, IP21/IP54,
Accessories

VSD2H Advanced Commissioning Keypad



ACC/VSD2H/TEXT DISPLAY

Honeywell VSD2H Variable Speed Drivers for HVAC applications, 1,1..160kW, IP21/IP54,
Accessories

VSD2H Replacement Text Keypad



ACC/VSD2H/USB-PC/CABLE

Honeywell VSD2H Variable Speed Drivers for HVAC applications, 1,1..160kW, IP21/IP54,
Accessories

VSD2H PC Adaptor Kit - USB adaptor cable



ACCA-AD2034-SW2

Honeywell Actuator for Damper, Springreturn, 10/20 Nm
Accessories

End switch kit, with 2 SPDT freely adjustable end-switches.



ACCA-AL06-SW

Honeywell Actuator Linear 600N 20mm, AL0620
Accessories

Dual end switches SPDT, adjustable (250 V~, 10 A) for AL0620-P models.



ACCA-AL18-SW

Honeywell Actuator Linear 1800N 20mm, AL1820
Accessories

Dual end switches SPDT, adjustable (250 V~, 10 A)



ACCA-WC-L

Honeywell Splash proof covers, ACCA-WC


Model: Large cover for ML64, ML74, 1800N actuators


ACCA-WC-M

Honeywell Splash proof covers, ACCA-WC


Model: Medium size cover for ML64, ML74, 600N actuators


ACCA-WC-S

Honeywell Splash proof covers, ACCA-WC


Model: Small cover for ML64, ML74, 400N actuators


ACCA/VB/ADK

Honeywell Actuator Linear 300N 6.5mm, AL0306
Accessories

AL0306 to VB valve adaptor (5 off)



ACCV-5585100

Honeywell Valve, zoning, 2-port, V582
Accessories Conex sealing

Commissioning Caps for V58* and VS58* series valves (Pack of 10)



ACCV-TC-15

Honeywell Valve, PN16, 2-port, Externally threaded, V162X
Accessories

Internal threaded fitting for DN15 valve pipe size Rp 1/2"



ACCV-TC-20

Honeywell Valve, PN16, 2-port, Externally threaded, V162X
Accessories

Internal threaded fitting for DN20 valve pipe size Rp 3/4"



ACCV-TC-25

Honeywell Short stroke, Valve, PN16, 2-port, SV162X
Accessories

Internal threaded fitting for DN25 valve pipe size Rp 1"



ACCV-TC-32

Honeywell Short stroke, Valve, PN16, 2-port, SV162X
Accessories

Internal threaded fitting for DN32 valve pipe size Rp 1 1/4"



ACCV-TC-40

Honeywell Short stroke, Valve, PN16, 2-port, SV162X
Accessories

Internal threaded fitting for DN40 valve pipe size Rp 1 1/2"



ACCV-TC-50

Honeywell Valve, PN16, 2-port, Externally threaded, V162X
Accessories

Internal threaded fitting for DN50 valve pipe size Rp 2"



AD05-230

Honeywell Actuator for Damper, 5/10 Nm, AD05, AD10

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Shaft mounting: for round shafts 8..16 mm; square shafts 6..13 mm
removable wiring box for direct wiring to and from controller
rotation direction selectable by switch
adjustable mechanical end limits included
24 Vac models also suitable for 24 Vdc
Built in rotation limiter: yes
Manual operation: yes

For damper area of up to 1 square meter
Power supply: 230Vac
Control input signal: 2-pt
End switches: no
Runtime: max. 110s;50Hz
Torque: 5Nm
Damper area: 1m2


AD05-24

Honeywell Actuator for Damper, 5/10 Nm, AD05, AD10

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Shaft mounting: for round shafts 8..16 mm; square shafts 6..13 mm
removable wiring box for direct wiring to and from controller
rotation direction selectable by switch
adjustable mechanical end limits included
24 Vac models also suitable for 24 Vdc
Built in rotation limiter: yes
Manual operation: yes

For damper area of up to 1 square meter
Power supply: 24Vac
Control input signal: 2/3-pt
End switches: no
Runtime: 110s;50Hz
Torque: 5Nm
Damper area: 1m2


AD05-24-SW2

Honeywell Actuator for Damper, 5/10 Nm, AD05, AD10

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Shaft mounting: for round shafts 8..16 mm; square shafts 6..13 mm
removable wiring box for direct wiring to and from controller
rotation direction selectable by switch
adjustable mechanical end limits included
24 Vac models also suitable for 24 Vdc
Built in rotation limiter: yes
Manual operation: yes

For damper area of up to 1 square meter
Power supply: 24Vac
Control input signal: 2/3-pt
End switches: 2
Runtime: 110s;50Hz
Torque: 5Nm
Damper area: 1m2


AD05-P

Honeywell Actuator for Damper, 5/10 Nm, AD05, AD10

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Shaft mounting: for round shafts 8..16 mm; square shafts 6..13 mm
removable wiring box for direct wiring to and from controller
rotation direction selectable by switch
adjustable mechanical end limits included
24 Vac models also suitable for 24 Vdc
Built in rotation limiter: yes
Manual operation: yes

For damper area of up to 1 square meter
Power supply: 24Vac
Control input signal: 0/2..10V=;2/3-pt
End switches: no
Runtime: 90/110s;50Hz
Torque: 5Nm
Damper area: 1m2


AD05-P-SW2

Honeywell Actuator for Damper, 5/10 Nm, AD05, AD10

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Shaft mounting: for round shafts 8..16 mm; square shafts 6..13 mm
removable wiring box for direct wiring to and from controller
rotation direction selectable by switch
adjustable mechanical end limits included
24 Vac models also suitable for 24 Vdc
Built in rotation limiter: yes
Manual operation: yes

For damper area of up to 1 square meter
Power supply: 24Vac
Control input signal: 0/2..10V=;2/3-pt
End switches: 2
Runtime: 90/110s;50Hz
Torque: 5Nm
Damper area: 1m2


AD10-230

Honeywell Actuator for Damper, 5/10 Nm, AD05, AD10

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Shaft mounting: for round shafts 8..16 mm; square shafts 6..13 mm
removable wiring box for direct wiring to and from controller
rotation direction selectable by switch
adjustable mechanical end limits included
24 Vac models also suitable for 24 Vdc
Built in rotation limiter: yes
Manual operation: yes

For damper area of up to 2 square meters
Power supply: 230Vac
Control input signal: 2-pt
End switches: no
Runtime: max. 140s;50Hz
Torque: 10Nm
Damper area: 2m2


AD10-24

Honeywell Actuator for Damper, 5/10 Nm, AD05, AD10

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Shaft mounting: for round shafts 8..16 mm; square shafts 6..13 mm
removable wiring box for direct wiring to and from controller
rotation direction selectable by switch
adjustable mechanical end limits included
24 Vac models also suitable for 24 Vdc
Built in rotation limiter: yes
Manual operation: yes

For damper area of up to 2 square meters
Power supply: 24Vac
Control input signal: 2/3-pt
End switches: no
Runtime: 110s;50Hz
Torque: 10Nm
Damper area: 2m2


AD10-24-SW2

Honeywell Actuator for Damper, 5/10 Nm, AD05, AD10

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Shaft mounting: for round shafts 8..16 mm; square shafts 6..13 mm
removable wiring box for direct wiring to and from controller
rotation direction selectable by switch
adjustable mechanical end limits included
24 Vac models also suitable for 24 Vdc
Built in rotation limiter: yes
Manual operation: yes

For damper area of up to 2 square meters
Power supply: 24Vac
Control input signal: 2/3-pt
End switches: 2
Runtime: 90/110s;50Hz
Torque: 10Nm
Damper area: 2m2


AD10-P

Honeywell Actuator for Damper, 5/10 Nm, AD05, AD10

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Shaft mounting: for round shafts 8..16 mm; square shafts 6..13 mm
removable wiring box for direct wiring to and from controller
rotation direction selectable by switch
adjustable mechanical end limits included
24 Vac models also suitable for 24 Vdc
Built in rotation limiter: yes
Manual operation: yes

For damper area of up to 2 square meters
Power supply: 24Vac
Control input signal: 0/2..10V=;2/3-pt
End switches: 2
Runtime: 110s;50Hz
Torque: 10Nm
Damper area: 2m2


AD10-P-SW2

Honeywell Actuator for Damper, 5/10 Nm, AD05, AD10

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Shaft mounting: for round shafts 8..16 mm; square shafts 6..13 mm
removable wiring box for direct wiring to and from controller
rotation direction selectable by switch
adjustable mechanical end limits included
24 Vac models also suitable for 24 Vdc
Built in rotation limiter: yes
Manual operation: yes

For damper area of up to 2 square meters
Power supply: 24Vac
Control input signal: 0/2..10V=;2/3-pt
End switches: 2
Runtime: 110s;50Hz
Torque: 10Nm
Damper area: 2m2


AD20-230

Honeywell Actuator for Damper, 20/34 Nm, AD20, AD34

Direct-coupled actuator with self-centering shaft adapter.
For air dampers, air handlers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: rotational angle scales 0..90o, 90..0o
Shaft mounting: for round shafts 10..27 mm; square shafts 10..18 mm
rotation direction selectable by switch
when power is removed, the actuator remains in position
removable wiring box
actuator supplied with complete package mounting parts
for modulating control models: control input signal can be voltage or current
for modulating control models: autoadapt dipswitch; with this function the full span of the control input signal will be used for the applicable angle or rotation
Manual operation: yes

For damper area of up to 4 square meters
Power supply: 230Vac
Control input signal: 2/3-pt
Built in rotation limiter: yes
Position feedback: no
Runtime: 110s
Torque: 20Nm
Damper area: 4m2


AD20-24

Honeywell Actuator for Damper, 20/34 Nm, AD20, AD34

Direct-coupled actuator with self-centering shaft adapter.
For air dampers, air handlers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: rotational angle scales 0..90o, 90..0o
Shaft mounting: for round shafts 10..27 mm; square shafts 10..18 mm
rotation direction selectable by switch
when power is removed, the actuator remains in position
removable wiring box
actuator supplied with complete package mounting parts
for modulating control models: control input signal can be voltage or current
for modulating control models: autoadapt dipswitch; with this function the full span of the control input signal will be used for the applicable angle or rotation
Manual operation: yes

For damper area of up to 4 square meters
Power supply: 24Vac
Control input signal: 2/3-pt
Built in rotation limiter: yes
Position feedback: no
Runtime: 110s
Torque: 20Nm
Damper area: 4m2


AD20-P

Honeywell Actuator for Damper, 20/34 Nm, AD20, AD34

Direct-coupled actuator with self-centering shaft adapter.
For air dampers, air handlers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: rotational angle scales 0..90o, 90..0o
Shaft mounting: for round shafts 10..27 mm; square shafts 10..18 mm
rotation direction selectable by switch
when power is removed, the actuator remains in position
removable wiring box
actuator supplied with complete package mounting parts
for modulating control models: control input signal can be voltage or current
for modulating control models: autoadapt dipswitch; with this function the full span of the control input signal will be used for the applicable angle or rotation
Manual operation: yes

For damper area of up to 4 square meters
Power supply: 24Vac
Control input signal: 0/2..10V=
Built in rotation limiter: yes
Position feedback: 0/2..10V=
Runtime: 95s
Torque: 20Nm
Damper area: 4m2


AD34-230

Honeywell Actuator for Damper, 20/34 Nm, AD20, AD34

Direct-coupled actuator with self-centering shaft adapter.
For air dampers, air handlers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: rotational angle scales 0..90o, 90..0o
Shaft mounting: for round shafts 10..27 mm; square shafts 10..18 mm
rotation direction selectable by switch
when power is removed, the actuator remains in position
removable wiring box
actuator supplied with complete package mounting parts
for modulating control models: control input signal can be voltage or current
for modulating control models: autoadapt dipswitch; with this function the full span of the control input signal will be used for the applicable angle or rotation
Manual operation: yes

For damper area of up to 6 square meters
Power supply: 230Vac
Control input signal: 2/3-pt
Built in rotation limiter: no
Position feedback: no
Runtime: 110s
Torque: 34Nm
Damper area: 6m2


AD34-24

Honeywell Actuator for Damper, 20/34 Nm, AD20, AD34

Direct-coupled actuator with self-centering shaft adapter.
For air dampers, air handlers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: rotational angle scales 0..90o, 90..0o
Shaft mounting: for round shafts 10..27 mm; square shafts 10..18 mm
rotation direction selectable by switch
when power is removed, the actuator remains in position
removable wiring box
actuator supplied with complete package mounting parts
for modulating control models: control input signal can be voltage or current
for modulating control models: autoadapt dipswitch; with this function the full span of the control input signal will be used for the applicable angle or rotation
Manual operation: yes

For damper area of up to 6 square meters
Power supply: 24Vac
Control input signal: 2/3-pt
Built in rotation limiter: no
Position feedback: no
Runtime: 110s
Torque: 34Nm
Damper area: 6m2


AD34-P

Honeywell Actuator for Damper, 20/34 Nm, AD20, AD34

Direct-coupled actuator with self-centering shaft adapter.
For air dampers, air handlers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: rotational angle scales 0..90o, 90..0o
Shaft mounting: for round shafts 10..27 mm; square shafts 10..18 mm
rotation direction selectable by switch
when power is removed, the actuator remains in position
removable wiring box
actuator supplied with complete package mounting parts
for modulating control models: control input signal can be voltage or current
for modulating control models: autoadapt dipswitch; with this function the full span of the control input signal will be used for the applicable angle or rotation
Manual operation: yes

For damper area of up to 6 square meters
Power supply: 24Vac
Control input signal: 0/2..10V=
Built in rotation limiter: no
Position feedback: 0/2..10V=
Runtime: 95s
Torque: 34Nm
Damper area: 6m2


ADAPTOR BLUETOOTH/IQ22x-ADL

Honeywell Bluetooth Adaptor, BLUETOOTH

The Trend Bluetooth Supervisor Port Adaptor enables SET or 916 to interrogate and configure the Trend Building Management System using wireless communication. It is designed to provide a temporary connection for commissioning purposes.The Bluetooth adaptor plugs into an IQs local supervisor port, or a CNC2s RS232 port, and will communicate with any Bluetooth enabled laptop or handheld computer. Additional adaptor cables are available for use with older IQs or CNC2s.
Simple wireless connectivity
Walk around commissioning
Enables PCs with only a USB port to be used for commissioning (via USB/Bluetooth adaptor)
No separate power supply required (powered from IQ with correct adaptor cable)

Adaptor Cables
Model: Adaptor cable to IQ22x-ADL supervisor port


ADS10-230

Honeywell Actuator for Damper, Springreturn, 10/20 Nm

Direct-coupled actuator with self-centering shaft adapter.
For air dampers, air handlers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: rotational angle scales 0..90o, 90..0o
Shaft mounting: for round shafts 10..27 mm; square shafts 13..19 mm
rotation direction selectable by flipping the actuator 180o around its vertical axis
actuator supplied with complete package mounting parts
autoadapt dipswitch, with this function the full span of the control input signal will be used for the applicable angle or rotation
actuators come with detachable wiring box
actuator can be locked and manually wound
Spring return: yes
Manual operation: yes
Spring return timing: 20s

For damper area of up to 1.5 square meters
Power supply: 230Vac
Control input signal: 2-pt
Position feedback: no
Runtime: 45s;50Hz
Torque: 10Nm
Damper area: 1.5m2


ADS10-24

Honeywell Actuator for Damper, Springreturn, 10/20 Nm

Direct-coupled actuator with self-centering shaft adapter.
For air dampers, air handlers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: rotational angle scales 0..90o, 90..0o
Shaft mounting: for round shafts 10..27 mm; square shafts 13..19 mm
rotation direction selectable by flipping the actuator 180o around its vertical axis
actuator supplied with complete package mounting parts
autoadapt dipswitch, with this function the full span of the control input signal will be used for the applicable angle or rotation
actuators come with detachable wiring box
actuator can be locked and manually wound
Spring return: yes
Manual operation: yes
Spring return timing: 20s

For damper area of up to 1.5 square meters
Power supply: 24Vac
Control input signal: 2-pt
Position feedback: no
Runtime: 45s;50Hz
Torque: 10Nm
Damper area: 1.5m2


ADS10-P

Honeywell Actuator for Damper, Springreturn, 10/20 Nm

Direct-coupled actuator with self-centering shaft adapter.
For air dampers, air handlers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: rotational angle scales 0..90o, 90..0o
Shaft mounting: for round shafts 10..27 mm; square shafts 13..19 mm
rotation direction selectable by flipping the actuator 180o around its vertical axis
actuator supplied with complete package mounting parts
autoadapt dipswitch, with this function the full span of the control input signal will be used for the applicable angle or rotation
actuators come with detachable wiring box
actuator can be locked and manually wound
Spring return: yes
Manual operation: yes
Spring return timing: 20s

For damper area of up to 1.5 square meters
Power supply: 24Vac
Control input signal: 0/2..10V=;3-pt
Position feedback: 0..10V=
Runtime: 90s;50Hz
Torque: 10Nm
Damper area: 1.5m2


ADS20-230

Honeywell Actuator for Damper, Springreturn, 10/20 Nm

Direct-coupled actuator with self-centering shaft adapter.
For air dampers, air handlers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: rotational angle scales 0..90o, 90..0o
Shaft mounting: for round shafts 10..27 mm; square shafts 13..19 mm
rotation direction selectable by flipping the actuator 180o around its vertical axis
actuator supplied with complete package mounting parts
autoadapt dipswitch, with this function the full span of the control input signal will be used for the applicable angle or rotation
actuators come with detachable wiring box
actuator can be locked and manually wound
Spring return: yes
Manual operation: yes
Spring return timing: 20s

For damper area of up to 4 square meters
Power supply: 230Vac
Control input signal: 2-pt
Position feedback: no
Runtime: 45s;50Hz
Torque: 20Nm
Damper area: 4m2


ADS20-24

Honeywell Actuator for Damper, Springreturn, 10/20 Nm

Direct-coupled actuator with self-centering shaft adapter.
For air dampers, air handlers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: rotational angle scales 0..90o, 90..0o
Shaft mounting: for round shafts 10..27 mm; square shafts 13..19 mm
rotation direction selectable by flipping the actuator 180o around its vertical axis
actuator supplied with complete package mounting parts
autoadapt dipswitch, with this function the full span of the control input signal will be used for the applicable angle or rotation
actuators come with detachable wiring box
actuator can be locked and manually wound
Spring return: yes
Manual operation: yes
Spring return timing: 20s

For damper area of up to 4 square meters
Power supply: 24Vac
Control input signal: 2-pt
Position feedback: no
Runtime: 45s;50Hz
Torque: 20Nm
Damper area: 4m2


ADS20-P

Honeywell Actuator for Damper, Springreturn, 10/20 Nm

Direct-coupled actuator with self-centering shaft adapter.
For air dampers, air handlers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: rotational angle scales 0..90o, 90..0o
Shaft mounting: for round shafts 10..27 mm; square shafts 13..19 mm
rotation direction selectable by flipping the actuator 180o around its vertical axis
actuator supplied with complete package mounting parts
autoadapt dipswitch, with this function the full span of the control input signal will be used for the applicable angle or rotation
actuators come with detachable wiring box
actuator can be locked and manually wound
Spring return: yes
Manual operation: yes
Spring return timing: 20s

For damper area of up to 4 square meters
Power supply: 24Vac
Control input signal: 0/2..10V=;3-pt
Position feedback: 0..10V=
Runtime: 90s;50Hz
Torque: 20Nm
Damper area: 4m2


AF20

Honeywell Outdoor temperature sensor NTC, AF20, T7416A

Mounting place: wall outside
Wiring terminals: 2


Temperature element: NTC20k
Temperature range: -30...60C
Housing (HxWxD): 85mm|65mm|70mm
Protection class: IP30


AFF-L

Honeywell Room temperature sensor NTC, LON, AFF-L

Room sensor for mounting on wall, with LON connection.
For temperature measurement in domestic and industrial areas.
Wiring connection: M12 plug connector
Protection class: IP65
Output signal: Echelon bus LONTalk protocol
LonMark(R) profile: temperature profile 1040
Transceiver type: FTT 10A
LON service and operation LED visible without disassembly. Mounting bracket H11 included.
Power supply: 24Vacdc
Temperature element: NTC20k
Temperature range: 0...50C
Mounting place: internal wall
Sensing element (dia x L): 3mm|65mm


AL0102-24

Honeywell Actuator Linear 90N 2.5mm, AL0102

Electrical actuator floating control, for valve series: VS58..
Protection class: IP43
Position indication: with red indicator
Manual operation with valve cap.
Stem force: 90N
Power supply: 24Vac
Control input signal: 3-pt
Stroke: 2.5mm
Runtime: 57s
Cable length: 0.9m


AL0206-230-K

Honeywell Actuator Linear 180N 6.5mm, AL0206

Electrical actuator for valve series: V58..
Protection class: IP43/IP42
Position indication: with red indicator
Reversible control action with AL0206-P-K.
Stem force: 180N
Stroke: 6.5mm
Runtime: 150s


Power supply: 230Vac
Control input signal: 3-pt
Manual operation: yes
Cable length: 1.5m


AL0206-24

Honeywell Actuator Linear 180N 6.5mm, AL0206

Electrical actuator for valve series: V58..
Protection class: IP43/IP42
Position indication: with red indicator
Reversible control action with AL0206-P-K.
Stem force: 180N
Stroke: 6.5mm
Runtime: 150s


Power supply: 24Vac
Control input signal: 3-pt
Manual operation: no
Cable length: 1.5m


AL0206-24-10M

Honeywell Actuator Linear 180N 6.5mm, AL0206

Electrical actuator for valve series: V58..
Protection class: IP43/IP42
Position indication: with red indicator
Reversible control action with AL0206-P-K.
Stem force: 180N
Stroke: 6.5mm
Runtime: 150s


Power supply: 24Vac
Control input signal: 3-pt
Manual operation: no
Cable length: 10m


AL0206-24-K

Honeywell Actuator Linear 180N 6.5mm, AL0206

Electrical actuator for valve series: V58..
Protection class: IP43/IP42
Position indication: with red indicator
Reversible control action with AL0206-P-K.
Stem force: 180N
Stroke: 6.5mm
Runtime: 150s


Power supply: 24Vac
Control input signal: 3-pt
Manual operation: yes
Cable length: 1.5m


AL0206-P-K

Honeywell Actuator Linear 180N 6.5mm, AL0206

Electrical actuator for valve series: V58..
Protection class: IP43/IP42
Position indication: with red indicator
Reversible control action with AL0206-P-K.
Stem force: 180N
Stroke: 6.5mm
Runtime: 150s


Power supply: 24Vac
Control input signal: 0/2..10V=
Manual operation: yes
Cable length: 1.5m


AL0306-230-K

Honeywell Actuator Linear 300N 6.5mm, AL0306

Electrical actuator floating control, for valve series: SV16..
Protection class: IP43/IP42
Position indication: with red indicator
Stroke: 6.5mm
Runtime: 150s
Cable length: 1.5m


Stem force: 300N
Power supply: 230Vac
Control input signal: 3-pt
Manual operation: yes


AL0306-24

Honeywell Actuator Linear 300N 6.5mm, AL0306

Electrical actuator floating control, for valve series: SV16..
Protection class: IP43/IP42
Position indication: with red indicator
Stroke: 6.5mm
Runtime: 150s
Cable length: 1.5m


Stem force: 300N
Power supply: 24Vac
Control input signal: 3-pt
Manual operation: no


AL0306-24-K

Honeywell Actuator Linear 300N 6.5mm, AL0306

Electrical actuator floating control, for valve series: SV16..
Protection class: IP43/IP42
Position indication: with red indicator
Stroke: 6.5mm
Runtime: 150s
Cable length: 1.5m


Stem force: 300N
Power supply: 24Vac
Control input signal: 3-pt
Manual operation: yes


AL0306-P-K

Honeywell Actuator Linear 300N 6.5mm, AL0306

Electrical actuator floating control, for valve series: SV16..
Protection class: IP43/IP42
Position indication: with red indicator
Stroke: 6.5mm
Runtime: 150s
Cable length: 1.5m


Stem force: 300N
Power supply: 24Vac
Control input signal: 0/2..10V=
Manual operation: yes


AL0406-P-K

Honeywell Actuator Linear 400N 6.5mm, AL0406

Electrical actuator modulating control, for valve series: SV16..
Protection class: IP54
Stem force: 400N
Control input signal: 0/2..10V=
Stroke: 6.5mm


Power supply: 24Vac
Power loss action: no
Manual operation: yes
Runtime: 15s
Spring return: no


AL0406-P-SU

Honeywell Actuator Linear 400N 6.5mm, AL0406

Electrical actuator modulating control, for valve series: SV16..
Protection class: IP54
Stem force: 400N
Control input signal: 0/2..10V=
Stroke: 6.5mm


Power supply: 24Vac
Power loss action: stem retracts
Manual operation: no
Runtime: 60s
Spring return: yes


AL0620-230-K

Honeywell Actuator Linear 600N 20mm, AL0620

Electrical actuator for valve series: V16.., V25.. with 20 mm stroke.
Protection class: IP54
Position indication: scale plate
End switches: optional
For modulating control models:
stem position at control signal loss is selectable: closed, half open or open (except AL0620-P)
the control action is reversible
Stem force: 600N
Stroke: 20mm


Power supply: 230Vac
Control input signal: 3-pt
Power loss action: no
Manual operation: yes
Runtime: 1.0min
Spring return: no
Position feedback: no


AL0620-230-SD

Honeywell Actuator Linear 600N 20mm, AL0620

Electrical actuator for valve series: V16.., V25.. with 20 mm stroke.
Protection class: IP54
Position indication: scale plate
End switches: optional
For modulating control models:
stem position at control signal loss is selectable: closed, half open or open (except AL0620-P)
the control action is reversible
Stem force: 600N
Stroke: 20mm

Spring return
Power supply: 230Vac
Control input signal: 3-pt
Power loss action: stem extends
Manual operation: yes
Runtime: 1.8min
Spring return: yes
Position feedback: no


AL0620-230-SU

Honeywell Actuator Linear 600N 20mm, AL0620

Electrical actuator for valve series: V16.., V25.. with 20 mm stroke.
Protection class: IP54
Position indication: scale plate
End switches: optional
For modulating control models:
stem position at control signal loss is selectable: closed, half open or open (except AL0620-P)
the control action is reversible
Stem force: 600N
Stroke: 20mm

Spring return
Power supply: 230Vac
Control input signal: 3-pt
Power loss action: stem retracts
Manual operation: yes
Runtime: 1.8min
Spring return: yes
Position feedback: no


AL0620-24-K

Honeywell Actuator Linear 600N 20mm, AL0620

Electrical actuator for valve series: V16.., V25.. with 20 mm stroke.
Protection class: IP54
Position indication: scale plate
End switches: optional
For modulating control models:
stem position at control signal loss is selectable: closed, half open or open (except AL0620-P)
the control action is reversible
Stem force: 600N
Stroke: 20mm


Power supply: 24Vac
Control input signal: 3-pt
Power loss action: no
Manual operation: yes
Runtime: 1.0min
Spring return: no
Position feedback: no


AL0620-24-SD

Honeywell Actuator Linear 600N 20mm, AL0620

Electrical actuator for valve series: V16.., V25.. with 20 mm stroke.
Protection class: IP54
Position indication: scale plate
End switches: optional
For modulating control models:
stem position at control signal loss is selectable: closed, half open or open (except AL0620-P)
the control action is reversible
Stem force: 600N
Stroke: 20mm

Spring return
Power supply: 24Vac
Control input signal: 3-pt
Power loss action: stem extends
Manual operation: yes
Runtime: 1.8min
Spring return: yes
Position feedback: no


AL0620-24-SU

Honeywell Actuator Linear 600N 20mm, AL0620

Electrical actuator for valve series: V16.., V25.. with 20 mm stroke.
Protection class: IP54
Position indication: scale plate
End switches: optional
For modulating control models:
stem position at control signal loss is selectable: closed, half open or open (except AL0620-P)
the control action is reversible
Stem force: 600N
Stroke: 20mm

Spring return
Power supply: 24Vac
Control input signal: 3-pt
Power loss action: stem retracts
Manual operation: yes
Runtime: 1.8min
Spring return: yes
Position feedback: no


AL0620-P

Honeywell Actuator Linear 600N 20mm, AL0620

Electrical actuator for valve series: V16.., V25.. with 20 mm stroke.
Protection class: IP54
Position indication: scale plate
End switches: optional
For modulating control models:
stem position at control signal loss is selectable: closed, half open or open (except AL0620-P)
the control action is reversible
Stem force: 600N
Stroke: 20mm


Power supply: 24Vac
Control input signal: 2..10V=
Power loss action: no
Manual operation: no
Runtime: 1.0min
Spring return: no
Position feedback: 2..10V=


AL0620-P-K

Honeywell Actuator Linear 600N 20mm, AL0620

Electrical actuator for valve series: V16.., V25.. with 20 mm stroke.
Protection class: IP54
Position indication: scale plate
End switches: optional
For modulating control models:
stem position at control signal loss is selectable: closed, half open or open (except AL0620-P)
the control action is reversible
Stem force: 600N
Stroke: 20mm


Power supply: 24Vac
Control input signal: 0/2..10V=
Power loss action: no
Manual operation: yes
Runtime: 1.0min
Spring return: no
Position feedback: 2..10V=


AL0620-P-SD

Honeywell Actuator Linear 600N 20mm, AL0620

Electrical actuator for valve series: V16.., V25.. with 20 mm stroke.
Protection class: IP54
Position indication: scale plate
End switches: optional
For modulating control models:
stem position at control signal loss is selectable: closed, half open or open (except AL0620-P)
the control action is reversible
Stem force: 600N
Stroke: 20mm

Spring return
Power supply: 24Vac
Control input signal: 0/2..10V=
Power loss action: stem extends
Manual operation: yes
Runtime: 1.8min
Spring return: yes
Position feedback: 2..10V=


AL0620-P-SU

Honeywell Actuator Linear 600N 20mm, AL0620

Electrical actuator for valve series: V16.., V25.. with 20 mm stroke.
Protection class: IP54
Position indication: scale plate
End switches: optional
For modulating control models:
stem position at control signal loss is selectable: closed, half open or open (except AL0620-P)
the control action is reversible
Stem force: 600N
Stroke: 20mm

Spring return
Power supply: 24Vac
Control input signal: 0/2..10V=
Power loss action: stem retracts
Manual operation: yes
Runtime: 1.8min
Spring return: yes
Position feedback: 2..10V=


AL0620-P-X-K

Honeywell Actuator Linear 600N 20mm, AL0620

Electrical actuator for valve series: V16.., V25.. with 20 mm stroke.
Protection class: IP54
Position indication: scale plate
End switches: optional
For modulating control models:
stem position at control signal loss is selectable: closed, half open or open (except AL0620-P)
the control action is reversible
Stem force: 600N
Stroke: 20mm


Power supply: 24Vac
Control input signal: 0/2..10V=
Power loss action: no
Manual operation: yes
Runtime: 0.5min
Spring return: no
Position feedback: 2..10V=


AL1820-230-K

Honeywell Actuator Linear 1800N 20mm, AL1820

Electrical actuator for valve series: V16.., V25.. with 20 mm stroke.
Protection class: IP54
Position indication: scale plate on the yoke
End switches: optional
For floating control model:
stem position at control signal loss is selectable: closed, half open or open.
Stem force: 1800N
Stroke: 20mm
Manual operation: yes
Runtime: 1.9min


Power supply: 230Vac
Control input signal: 3-pt
Position feedback: no


AL1820-24-K

Honeywell Actuator Linear 1800N 20mm, AL1820

Electrical actuator for valve series: V16.., V25.. with 20 mm stroke.
Protection class: IP54
Position indication: scale plate on the yoke
End switches: optional
For floating control model:
stem position at control signal loss is selectable: closed, half open or open.
Stem force: 1800N
Stroke: 20mm
Manual operation: yes
Runtime: 1.9min


Power supply: 24Vac
Control input signal: 3-pt
Position feedback: no


AL1820-P-K

Honeywell Actuator Linear 1800N 20mm, AL1820

Electrical actuator for valve series: V16.., V25.. with 20 mm stroke.
Protection class: IP54
Position indication: scale plate on the yoke
End switches: optional
For floating control model:
stem position at control signal loss is selectable: closed, half open or open.
Stem force: 1800N
Stroke: 20mm
Manual operation: yes
Runtime: 1.9min


Power supply: 24Vac
Control input signal: 0/2..10V=
Position feedback: 2..10V=


AL1838-230-K

Honeywell Actuator Linear 1800N 38mm, AL1838

Electrical actuator for valve series: V16.. with 38 mm stroke.
Protection class: IP54
Position indication: scale plate on the yoke
End switches: optional
For floating control model:
stem position at control signal loss is selectable: closed, half open or open
Stem force: 1800N
Stroke: 38mm
Manual operation: yes
Runtime: 3.5min


Power supply: 230Vac
Control input signal: 3-pt
Position feedback: no


AL1838-24-K

Honeywell Actuator Linear 1800N 38mm, AL1838

Electrical actuator for valve series: V16.. with 38 mm stroke.
Protection class: IP54
Position indication: scale plate on the yoke
End switches: optional
For floating control model:
stem position at control signal loss is selectable: closed, half open or open
Stem force: 1800N
Stroke: 38mm
Manual operation: yes
Runtime: 3.5min


Power supply: 24Vac
Control input signal: 3-pt
Position feedback: no


AL1838-P-K

Honeywell Actuator Linear 1800N 38mm, AL1838

Electrical actuator for valve series: V16.. with 38 mm stroke.
Protection class: IP54
Position indication: scale plate on the yoke
End switches: optional
For floating control model:
stem position at control signal loss is selectable: closed, half open or open
Stem force: 1800N
Stroke: 38mm
Manual operation: yes
Runtime: 3.5min


Power supply: 24Vac
Control input signal: 0/2..10V=
Position feedback: 2..10V=


ALF21

Honeywell Surface temperature sensor, Industrial/HVAC (ALF)

The temperature sensors are designed for universal use in systems of machine construction, process control, HVAC, environmental and agricultural area.
Protection class: IP65
Temperature range: -30...110C
Mounting place: strap on pipe


Temperature element: Pt100


ALF31

Honeywell Surface temperature sensor, Industrial/HVAC (ALF)

The temperature sensors are designed for universal use in systems of machine construction, process control, HVAC, environmental and agricultural area.
Protection class: IP65
Temperature range: -30...110C
Mounting place: strap on pipe


Temperature element: Pt1000


AQS-F0005

Honeywell CO2 and temperature transmitters, AQS51 AQS61


CO2 test set with gas generator for 0 ppm calibration



AQS-UPS11

Honeywell CO2 air quality and temperature sensor, AQS31 AQS41


Service software for parameter settings



AQS3/4CABLE

Honeywell CO2 and temperature transmitters, AQS51 AQS61


Interface cable to PC



AQS31

Honeywell CO2 air quality and temperature sensor, AQS31 AQS41

For sensing or controlling of CO2 concentration; and temperature measurement in buildings.
Output signal: the following output signals are applicable:
0..10Vdc for 0..2000/9999 ppm CO2
0..10Vdc for 0..50 oC
Models with LCD available for CO2 concentration or temperature reading.
Contact input for occupancy detection.
RS232-port for connection with PC for parameter settings.
Service interval 5 years, according 89/336EEC.
Power supply: 24Vac
Mounting place: internal wall
Housing (HxWxD): 171mm|57mm|43mm


Model: without LCD


AQS41

Honeywell CO2 air quality and temperature sensor, AQS31 AQS41

For sensing or controlling of CO2 concentration; and temperature measurement in buildings.
Output signal: the following output signals are applicable:
0..10Vdc for 0..2000/9999 ppm CO2
0..10Vdc for 0..50 oC
Models with LCD available for CO2 concentration or temperature reading.
Contact input for occupancy detection.
RS232-port for connection with PC for parameter settings.
Service interval 5 years, according 89/336EEC.
Power supply: 24Vac
Mounting place: internal wall
Housing (HxWxD): 171mm|57mm|43mm


Model: with LCD


AQS51

Honeywell CO2 and temperature transmitters, AQS51 AQS61

For sensing or controlling of CO2 concentration; and temperature measurement in buildings.
Output signal: the following output signals are applicable:
0(2)..10 Vdc or 0(4)..20 mA for 0..2000/3000 ppm CO2
0(2)..10 Vdc or 0(4)..20mA for 0..50 oC
relay output with adjustable CO2 setpoint and hysteresis for ventilation on/off
Models with LCD available for CO2 concentration or temperature reading.
Contact input for occupancy detection.
RS232-port for connection with PC for parameter settings.
Service interval 5 years, according 89/336EEC.
Power supply: 24Vac


Mounting place: internal wall
Cable length: 1m
Model: without LCD
Protection class: IP30


AQS51-KAM

Honeywell CO2 and temperature transmitters, AQS51 AQS61

For sensing or controlling of CO2 concentration; and temperature measurement in buildings.
Output signal: the following output signals are applicable:
0(2)..10 Vdc or 0(4)..20 mA for 0..2000/3000 ppm CO2
0(2)..10 Vdc or 0(4)..20mA for 0..50 oC
relay output with adjustable CO2 setpoint and hysteresis for ventilation on/off
Models with LCD available for CO2 concentration or temperature reading.
Contact input for occupancy detection.
RS232-port for connection with PC for parameter settings.
Service interval 5 years, according 89/336EEC.
Power supply: 24Vac


Mounting place: air duct
Cable length: 0.003m
Model: without LCD
Protection class: IP65


AQS61

Honeywell CO2 and temperature transmitters, AQS51 AQS61

For sensing or controlling of CO2 concentration; and temperature measurement in buildings.
Output signal: the following output signals are applicable:
0(2)..10 Vdc or 0(4)..20 mA for 0..2000/3000 ppm CO2
0(2)..10 Vdc or 0(4)..20mA for 0..50 oC
relay output with adjustable CO2 setpoint and hysteresis for ventilation on/off
Models with LCD available for CO2 concentration or temperature reading.
Contact input for occupancy detection.
RS232-port for connection with PC for parameter settings.
Service interval 5 years, according 89/336EEC.
Power supply: 24Vac


Mounting place: internal wall
Cable length: 0.002m
Model: with 7-segment LCD
Protection class: IP30


AQS61-KAM

Honeywell CO2 and temperature transmitters, AQS51 AQS61

For sensing or controlling of CO2 concentration; and temperature measurement in buildings.
Output signal: the following output signals are applicable:
0(2)..10 Vdc or 0(4)..20 mA for 0..2000/3000 ppm CO2
0(2)..10 Vdc or 0(4)..20mA for 0..50 oC
relay output with adjustable CO2 setpoint and hysteresis for ventilation on/off
Models with LCD available for CO2 concentration or temperature reading.
Contact input for occupancy detection.
RS232-port for connection with PC for parameter settings.
Service interval 5 years, according 89/336EEC.
Power supply: 24Vac


Mounting place: air duct
Cable length: 0.004m
Model: with 7-segment LCD
Protection class: IP65


AQSPC

Honeywell CO2 and temperature transmitters, AQS51 AQS61


Service software for parameter settings



AT0102-24-SD

Honeywell Actuator Thermic 90N 2.5mm, AT0102-24

Electrical actuator, on/off and PWM control, for valve series VS58..
Protection class: IP44
Position indication: with red indicator
Stem force: 90N
Cable length: 2.5m
Actuator supplied with mounting clip.
Power supply: 24Vac
Control input signal: 2-pt
Stroke: 2.5mm
Runtime: 6.0min
Initial current: 0.2A


Power loss action: stem extends


AT0102-24-SU

Honeywell Actuator Thermic 90N 2.5mm, AT0102-24

Electrical actuator, on/off and PWM control, for valve series VS58..
Protection class: IP44
Position indication: with red indicator
Stem force: 90N
Cable length: 2.5m
Actuator supplied with mounting clip.
Power supply: 24Vac
Control input signal: 2-pt
Stroke: 2.5mm
Runtime: 6.0min
Initial current: 0.2A


Power loss action: stem retracts


AT0106-230-SD

Honeywell Actuator Thermic 90N 6.5mm, AT0106

Electrical actuator, on/off and PWM control, for valve series V58..
Protection class: IP44
Position indication: with red indicator
Stem force: 90N
Cable length: 2.5m
Actuator supplied with mounting clip.
Control input signal: 2-pt
Stroke: 6.5mm


Power supply: 230Vac
Runtime: 5.5min
Initial current: 0.4A
Power loss action: stem extends


AT0106-230-SU

Honeywell Actuator Thermic 90N 6.5mm, AT0106

Electrical actuator, on/off and PWM control, for valve series V58..
Protection class: IP44
Position indication: with red indicator
Stem force: 90N
Cable length: 2.5m
Actuator supplied with mounting clip.
Control input signal: 2-pt
Stroke: 6.5mm


Power supply: 230Vac
Runtime: 5.5min
Initial current: 0.4A
Power loss action: stem retracts


AT0106-24-SD

Honeywell Actuator Thermic 90N 6.5mm, AT0106

Electrical actuator, on/off and PWM control, for valve series V58..
Protection class: IP44
Position indication: with red indicator
Stem force: 90N
Cable length: 2.5m
Actuator supplied with mounting clip.
Control input signal: 2-pt
Stroke: 6.5mm


Power supply: 24Vac
Runtime: 7.5min
Initial current: 0.2A
Power loss action: stem extends


AT0106-24-SU

Honeywell Actuator Thermic 90N 6.5mm, AT0106

Electrical actuator, on/off and PWM control, for valve series V58..
Protection class: IP44
Position indication: with red indicator
Stem force: 90N
Cable length: 2.5m
Actuator supplied with mounting clip.
Control input signal: 2-pt
Stroke: 6.5mm


Power supply: 24Vac
Runtime: 7.5min
Initial current: 0.2A
Power loss action: stem retracts


ATE10

Honeywell Solenoid valves for potable water (ATE)

This range of high-quality solenoid valves is not dependent on a specific minimum differential pressure; the valves operate extremely reliably with no pressure, at slight differential pressure, right through to maximum pressure. They are therefore the valves of choice for installation in plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. The ATE valve series may only be used for media free from oil and grease, such as drinking water, hot water or alkaline detergents and bleaches. Solenoid valves of the AT series are VDE-approved according to EN 60730 as electrically operated water valves up to 50C. Furthermore, the EPDM sealing material satisfies the "KTW" (plastics in drinking water) recommendations of the German Department of Health.
Valve application: liquid
Materials: Casing: brass Internal parts: stainless steel Membrane: EPDM
Media temp.: 0...90C
Ambient temperature: 0...55C
Operating mode: normally closed
Power supply: 230V 50Hz
Certificates: VDE-approval according EN 60730 up to 50 degree
Working range: 0...10bar


DN size: 10mm
Kvs value: 1.9
Connections: G3/8


ATE13

Honeywell Solenoid valves for potable water (ATE)

This range of high-quality solenoid valves is not dependent on a specific minimum differential pressure; the valves operate extremely reliably with no pressure, at slight differential pressure, right through to maximum pressure. They are therefore the valves of choice for installation in plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. The ATE valve series may only be used for media free from oil and grease, such as drinking water, hot water or alkaline detergents and bleaches. Solenoid valves of the AT series are VDE-approved according to EN 60730 as electrically operated water valves up to 50C. Furthermore, the EPDM sealing material satisfies the "KTW" (plastics in drinking water) recommendations of the German Department of Health.
Valve application: liquid
Materials: Casing: brass Internal parts: stainless steel Membrane: EPDM
Media temp.: 0...90C
Ambient temperature: 0...55C
Operating mode: normally closed
Power supply: 230V 50Hz
Certificates: VDE-approval according EN 60730 up to 50 degree
Working range: 0...10bar


DN size: 13mm
Kvs value: 3.6
Connections: G1/2


ATE20

Honeywell Solenoid valves for potable water (ATE)

This range of high-quality solenoid valves is not dependent on a specific minimum differential pressure; the valves operate extremely reliably with no pressure, at slight differential pressure, right through to maximum pressure. They are therefore the valves of choice for installation in plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. The ATE valve series may only be used for media free from oil and grease, such as drinking water, hot water or alkaline detergents and bleaches. Solenoid valves of the AT series are VDE-approved according to EN 60730 as electrically operated water valves up to 50C. Furthermore, the EPDM sealing material satisfies the "KTW" (plastics in drinking water) recommendations of the German Department of Health.
Valve application: liquid
Materials: Casing: brass Internal parts: stainless steel Membrane: EPDM
Media temp.: 0...90C
Ambient temperature: 0...55C
Operating mode: normally closed
Power supply: 230V 50Hz
Certificates: VDE-approval according EN 60730 up to 50 degree
Working range: 0...10bar


DN size: 20mm
Kvs value: 8.3
Connections: G3/4


ATE25

Honeywell Solenoid valves for potable water (ATE)

This range of high-quality solenoid valves is not dependent on a specific minimum differential pressure; the valves operate extremely reliably with no pressure, at slight differential pressure, right through to maximum pressure. They are therefore the valves of choice for installation in plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. The ATE valve series may only be used for media free from oil and grease, such as drinking water, hot water or alkaline detergents and bleaches. Solenoid valves of the AT series are VDE-approved according to EN 60730 as electrically operated water valves up to 50C. Furthermore, the EPDM sealing material satisfies the "KTW" (plastics in drinking water) recommendations of the German Department of Health.
Valve application: liquid
Materials: Casing: brass Internal parts: stainless steel Membrane: EPDM
Media temp.: 0...90C
Ambient temperature: 0...55C
Operating mode: normally closed
Power supply: 230V 50Hz
Certificates: VDE-approval according EN 60730 up to 50 degree
Working range: 0...10bar


DN size: 25mm
Kvs value: 11
Connections: G1


ATE32

Honeywell Solenoid valves for potable water (ATE)

This range of high-quality solenoid valves is not dependent on a specific minimum differential pressure; the valves operate extremely reliably with no pressure, at slight differential pressure, right through to maximum pressure. They are therefore the valves of choice for installation in plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. The ATE valve series may only be used for media free from oil and grease, such as drinking water, hot water or alkaline detergents and bleaches. Solenoid valves of the AT series are VDE-approved according to EN 60730 as electrically operated water valves up to 50C. Furthermore, the EPDM sealing material satisfies the "KTW" (plastics in drinking water) recommendations of the German Department of Health.
Valve application: liquid
Materials: Casing: brass Internal parts: stainless steel Membrane: EPDM
Media temp.: 0...90C
Ambient temperature: 0...55C
Operating mode: normally closed
Power supply: 230V 50Hz
Certificates: VDE-approval according EN 60730 up to 50 degree
Working range: 0...10bar


DN size: 25mm
Kvs value: 11
Connections: G1 1/4


ATE40

Honeywell Solenoid valves for potable water (ATE)

This range of high-quality solenoid valves is not dependent on a specific minimum differential pressure; the valves operate extremely reliably with no pressure, at slight differential pressure, right through to maximum pressure. They are therefore the valves of choice for installation in plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. The ATE valve series may only be used for media free from oil and grease, such as drinking water, hot water or alkaline detergents and bleaches. Solenoid valves of the AT series are VDE-approved according to EN 60730 as electrically operated water valves up to 50C. Furthermore, the EPDM sealing material satisfies the "KTW" (plastics in drinking water) recommendations of the German Department of Health.
Valve application: liquid
Materials: Casing: brass Internal parts: stainless steel Membrane: EPDM
Media temp.: 0...90C
Ambient temperature: 0...55C
Operating mode: normally closed
Power supply: 230V 50Hz
Certificates: VDE-approval according EN 60730 up to 50 degree
Working range: 0...10bar


DN size: 40mm
Kvs value: 30
Connections: G1 1/2


ATE50

Honeywell Solenoid valves for potable water (ATE)

This range of high-quality solenoid valves is not dependent on a specific minimum differential pressure; the valves operate extremely reliably with no pressure, at slight differential pressure, right through to maximum pressure. They are therefore the valves of choice for installation in plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. The ATE valve series may only be used for media free from oil and grease, such as drinking water, hot water or alkaline detergents and bleaches. Solenoid valves of the AT series are VDE-approved according to EN 60730 as electrically operated water valves up to 50C. Furthermore, the EPDM sealing material satisfies the "KTW" (plastics in drinking water) recommendations of the German Department of Health.
Valve application: liquid
Materials: Casing: brass Internal parts: stainless steel Membrane: EPDM
Media temp.: 0...90C
Ambient temperature: 0...55C
Operating mode: normally closed
Power supply: 230V 50Hz
Certificates: VDE-approval according EN 60730 up to 50 degree
Working range: 0...10bar


DN size: 40mm
Kvs value: 30
Connections: G2


AV-D-10

Honeywell Air velocity transmitter, AV-D AV-R

Output signal: 0..10V or 4..20 mA (default)
Housing (HxWxD): 81mm|101mm|46mm
Wiring terminals: 3
Power supply: 24Vacdc
Measuring range: selectable: 0..10 m/s, 0..15 m/s, 0..20 m/s
Humidity 5..95 %rh, non condensing.


Mounting: in duct
Protection class: IP65


AV-R-10

Honeywell Air velocity transmitter, AV-D AV-R

Output signal: 0..10V or 4..20 mA (default)
Housing (HxWxD): 81mm|101mm|46mm
Wiring terminals: 3
Power supply: 24Vacdc
Measuring range: selectable: 0..10 m/s, 0..15 m/s, 0..20 m/s
Humidity 5..95 %rh, non condensing.


Mounting: remote
Protection class: IP65, remote probe IP20


AVE102

Honeywell Solenoid valves for neutral liquid medium (AVE)

This range of high-quality solenoid valves is not dependent on a specific minimum differential pressure; the valves operate extremely reliably with no pressure, at slight differential pressure, right through to maximum pressure. They are therefore the valves of choice for installation in plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. Solenoid valves of the AV series are approved as safety shut-off devices according to DIN EN ISO23553-1.
Valve application: fuel oil
Materials: Casing: brass Internal parts: stainless steel Membrane: Viton
Media temp.: 0...90C
Ambient temperature: 0...55C
Operating mode: normally closed
Power supply: 230V 50Hz
Certificates: 5S262 according to DIN EN ISO 23553-1:2009-10


DN size: 10mm
Kvs value: 1.9
Working range: 0...4bar
Connections: G3/8


AVE103

Honeywell Solenoid valves for neutral liquid medium (AVE)

This range of high-quality solenoid valves is not dependent on a specific minimum differential pressure; the valves operate extremely reliably with no pressure, at slight differential pressure, right through to maximum pressure. They are therefore the valves of choice for installation in plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. Solenoid valves of the AV series are approved as safety shut-off devices according to DIN EN ISO23553-1.
Valve application: fuel oil
Materials: Casing: brass Internal parts: stainless steel Membrane: Viton
Media temp.: 0...90C
Ambient temperature: 0...55C
Operating mode: normally closed
Power supply: 230V 50Hz
Certificates: 5S262 according to DIN EN ISO 23553-1:2009-10


DN size: 10mm
Kvs value: 1.9
Working range: 0...4bar
Connections: G1/2


AVE131

Honeywell Solenoid valves for neutral liquid medium (AVE)

This range of high-quality solenoid valves is not dependent on a specific minimum differential pressure; the valves operate extremely reliably with no pressure, at slight differential pressure, right through to maximum pressure. They are therefore the valves of choice for installation in plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. Solenoid valves of the AV series are approved as safety shut-off devices according to DIN EN ISO23553-1.
Valve application: fuel oil
Materials: Casing: brass Internal parts: stainless steel Membrane: Viton
Media temp.: 0...90C
Ambient temperature: 0...55C
Operating mode: normally closed
Power supply: 230V 50Hz
Certificates: 5S262 according to DIN EN ISO 23553-1:2009-10


DN size: 13mm
Kvs value: 3.6
Working range: 0...4bar
Connections: G1/2


AVE201

Honeywell Solenoid valves for neutral liquid medium (AVE)

This range of high-quality solenoid valves is not dependent on a specific minimum differential pressure; the valves operate extremely reliably with no pressure, at slight differential pressure, right through to maximum pressure. They are therefore the valves of choice for installation in plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. Solenoid valves of the AV series are approved as safety shut-off devices according to DIN EN ISO23553-1.
Valve application: fuel oil
Materials: Casing: brass Internal parts: stainless steel Membrane: Viton
Media temp.: 0...90C
Ambient temperature: 0...55C
Operating mode: normally closed
Power supply: 230V 50Hz
Certificates: 5S262 according to DIN EN ISO 23553-1:2009-10


DN size: 20mm
Kvs value: 8.3
Working range: 0...10bar
Connections: G3/4


AVE251

Honeywell Solenoid valves for neutral liquid medium (AVE)

This range of high-quality solenoid valves is not dependent on a specific minimum differential pressure; the valves operate extremely reliably with no pressure, at slight differential pressure, right through to maximum pressure. They are therefore the valves of choice for installation in plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. Solenoid valves of the AV series are approved as safety shut-off devices according to DIN EN ISO23553-1.
Valve application: fuel oil
Materials: Casing: brass Internal parts: stainless steel Membrane: Viton
Media temp.: 0...90C
Ambient temperature: 0...55C
Operating mode: normally closed
Power supply: 230V 50Hz
Certificates: 5S262 according to DIN EN ISO 23553-1:2009-10


DN size: 25mm
Kvs value: 11
Working range: 0...10bar
Connections: G1


AVE252

Honeywell Solenoid valves for neutral liquid medium (AVE)

This range of high-quality solenoid valves is not dependent on a specific minimum differential pressure; the valves operate extremely reliably with no pressure, at slight differential pressure, right through to maximum pressure. They are therefore the valves of choice for installation in plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. Solenoid valves of the AV series are approved as safety shut-off devices according to DIN EN ISO23553-1.
Valve application: fuel oil
Materials: Casing: brass Internal parts: stainless steel Membrane: Viton
Media temp.: 0...90C
Ambient temperature: 0...55C
Operating mode: normally closed
Power supply: 230V 50Hz
Certificates: 5S262 according to DIN EN ISO 23553-1:2009-10


DN size: 25mm
Kvs value: 11
Working range: 0...10bar
Connections: G1 1/4


AVE401

Honeywell Solenoid valves for neutral liquid medium (AVE)

This range of high-quality solenoid valves is not dependent on a specific minimum differential pressure; the valves operate extremely reliably with no pressure, at slight differential pressure, right through to maximum pressure. They are therefore the valves of choice for installation in plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. Solenoid valves of the AV series are approved as safety shut-off devices according to DIN EN ISO23553-1.
Valve application: fuel oil
Materials: Casing: brass Internal parts: stainless steel Membrane: Viton
Media temp.: 0...90C
Ambient temperature: 0...55C
Operating mode: normally closed
Power supply: 230V 50Hz
Certificates: 5S262 according to DIN EN ISO 23553-1:2009-10


DN size: 40mm
Kvs value: 30
Working range: 0...10bar
Connections: G1 1/2


AVE402

Honeywell Solenoid valves for neutral liquid medium (AVE)

This range of high-quality solenoid valves is not dependent on a specific minimum differential pressure; the valves operate extremely reliably with no pressure, at slight differential pressure, right through to maximum pressure. They are therefore the valves of choice for installation in plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. Solenoid valves of the AV series are approved as safety shut-off devices according to DIN EN ISO23553-1.
Valve application: fuel oil
Materials: Casing: brass Internal parts: stainless steel Membrane: Viton
Media temp.: 0...90C
Ambient temperature: 0...55C
Operating mode: normally closed
Power supply: 230V 50Hz
Certificates: 5S262 according to DIN EN ISO 23553-1:2009-10


DN size: 40mm
Kvs value: 30
Working range: 0...10bar
Connections: G2


BLUETOOTH ADAPT SPVR PRT

Honeywell Bluetooth Adaptor, BLUETOOTH

The Trend Bluetooth Supervisor Port Adaptor enables SET or 916 to interrogate and configure the Trend Building Management System using wireless communication. It is designed to provide a temporary connection for commissioning purposes.The Bluetooth adaptor plugs into an IQs local supervisor port, or a CNC2s RS232 port, and will communicate with any Bluetooth enabled laptop or handheld computer. Additional adaptor cables are available for use with older IQs or CNC2s.
Simple wireless connectivity
Walk around commissioning
Enables PCs with only a USB port to be used for commissioning (via USB/Bluetooth adaptor)
No separate power supply required (powered from IQ with correct adaptor cable)


Model: Trend Bluetooth Adaptor


C7068A1007

Honeywell Unit temperature sensor, C7068A

Temperature sensor for air handling units, fancoil units or air outlets.
Protection class: IP54
Mounting place: air duct
Sensor supplied with mounting bracket. Sensing element size: diameter 10 mm, length 50 mm.
Temperature range: 0...70C
Wiring terminals: 2


Temperature element: NTC20k
Cable length: 1.5m


C7068A1007-5M

Honeywell Unit temperature sensor, C7068A

Temperature sensor for air handling units, fancoil units or air outlets.
Protection class: IP54
Mounting place: air duct
Sensor supplied with mounting bracket. Sensing element size: diameter 10 mm, length 50 mm.
Temperature range: 0...70C
Wiring terminals: 2


Temperature element: NTC20k
Cable length: 5m


C7068A1030

Honeywell Unit temperature sensor, C7068A

Temperature sensor for air handling units, fancoil units or air outlets.
Protection class: IP54
Mounting place: air duct
Sensor supplied with mounting bracket. Sensing element size: diameter 10 mm, length 50 mm.
Temperature range: 0...70C
Wiring terminals: 2


Temperature element: NTC10k
Cable length: 1.5m


C7115A1000

Honeywell Room sensor for temperature, light and occupancy, LON, C7115

Sensor for ceiling mounting, with 3 sensing elements and LON connection. Inputs/outputs available for signal transfer to/from LON bus. Built-in occupancy controller.
Applicable for:
room temperature measurement (model C)
ambient light measurement
motion/occupancy detection
Temperature range: 0...50C
Light range: 0..2000 lux
Occupancy view: 360o
Mounting height: 2,4 meter for 46 m2 coverage area
3,0 meter for 65 m2 coverage area
3,6 meter for 84 m2 coverage area
LED functions: node configration status
wink function
detected motion indication
Input signal: 4 input connections available for signal supply to LON bus:
analog sensor 0..10V (model B, C)
2 universal inputs 0/5 volt signal (model B, C)
occupancy signal 0/5 volt signal
Output signal: on/off open collector output (0/28 volt 50mA) for actuator; signal value from LON bus (model B, C)
LonMark(R) profile: Echelon bus LONTalk protocol inputs/outputs:
profile 1040 for temperature output
profile 1010 for light output
profile 1060 for occupancy output
profile 3200 for 0/5 volt input signals
profile 0520 for 0..10 volt sensor signal
profile 0700 for actuator signal
profile 3071 for occupancy controller
Transceiver type: FTT 10A
Power supply: 24Vac
Mounting place: ceiling


Model: With occupancy, light function


C7115B1008

Honeywell Room sensor for temperature, light and occupancy, LON, C7115

Sensor for ceiling mounting, with 3 sensing elements and LON connection. Inputs/outputs available for signal transfer to/from LON bus. Built-in occupancy controller.
Applicable for:
room temperature measurement (model C)
ambient light measurement
motion/occupancy detection
Temperature range: 0...50C
Light range: 0..2000 lux
Occupancy view: 360o
Mounting height: 2,4 meter for 46 m2 coverage area
3,0 meter for 65 m2 coverage area
3,6 meter for 84 m2 coverage area
LED functions: node configration status
wink function
detected motion indication
Input signal: 4 input connections available for signal supply to LON bus:
analog sensor 0..10V (model B, C)
2 universal inputs 0/5 volt signal (model B, C)
occupancy signal 0/5 volt signal
Output signal: on/off open collector output (0/28 volt 50mA) for actuator; signal value from LON bus (model B, C)
LonMark(R) profile: Echelon bus LONTalk protocol inputs/outputs:
profile 1040 for temperature output
profile 1010 for light output
profile 1060 for occupancy output
profile 3200 for 0/5 volt input signals
profile 0520 for 0..10 volt sensor signal
profile 0700 for actuator signal
profile 3071 for occupancy controller
Transceiver type: FTT 10A
Power supply: 24Vac
Mounting place: ceiling


Model: With occupancy, light, input/output function


C7115C1006

Honeywell Room sensor for temperature, light and occupancy, LON, C7115

Sensor for ceiling mounting, with 3 sensing elements and LON connection. Inputs/outputs available for signal transfer to/from LON bus. Built-in occupancy controller.
Applicable for:
room temperature measurement (model C)
ambient light measurement
motion/occupancy detection
Temperature range: 0...50C
Light range: 0..2000 lux
Occupancy view: 360o
Mounting height: 2,4 meter for 46 m2 coverage area
3,0 meter for 65 m2 coverage area
3,6 meter for 84 m2 coverage area
LED functions: node configration status
wink function
detected motion indication
Input signal: 4 input connections available for signal supply to LON bus:
analog sensor 0..10V (model B, C)
2 universal inputs 0/5 volt signal (model B, C)
occupancy signal 0/5 volt signal
Output signal: on/off open collector output (0/28 volt 50mA) for actuator; signal value from LON bus (model B, C)
LonMark(R) profile: Echelon bus LONTalk protocol inputs/outputs:
profile 1040 for temperature output
profile 1010 for light output
profile 1060 for occupancy output
profile 3200 for 0/5 volt input signals
profile 0520 for 0..10 volt sensor signal
profile 0700 for actuator signal
profile 3071 for occupancy controller
Transceiver type: FTT 10A
Power supply: 24Vac
Mounting place: ceiling


Model: With occupancy, light, input/output, temperature function


C8125A1006

Honeywell Carbon Monoxide sensor, C8125A1006

Electrochemical sensor for measuring ambient air concentrations of carbon monoxide in the range of 0..300 ppm.
For operation in enclosed parking lots, garages, confined spaces etc.
Protection class: IP44
Output signal: 2..10Vdc (with 500 ohm resistor); 4..20 mA
Power supply: 24Vacdc
Mounting place: internal wall
Housing (HxWxD): 80mm|80mm|60mm


CABLE/EJ101442

Honeywell Trend Connect. Remote Ethernet Connection, TCONN

Trend Connect is a managed connectivity solution that utilises mobile communications to remotely connect to Trend Ethernet devices such as IQ3, EINC and 3Extend/EINC L. This remote connection is achieved using a High-Speed Packet Access (HSPA) connection, or a General Packet Radio Service (GPRS) connection where 3G connectivity is unavailable. The solution uses a Sierra Wireless Airlink Raven XE Ethernet gateway (modem) to provide a secure and reliable network connection to remote Ethernet devices, using a Virtual Private Network (VPN). The VPN infrastructure and connection are managed by Trend Control Systems, reducing the administration resource and commissioning time. The connection provided allows the full use of Trend software such as 963 and System Engineering Tool (SET), and enables Trends post-occupancy services such as IQEYE, Trend Energy Manager, remote alarm monitoring, and 24/7 remote support.
The Trend Connect managed network enables full administration and reporting of the connected Trend site to be carried out. Access to the site is through a Virtual Private Network (VPN) connection, using an internet connection provided by the HSPA (3G) or GPRS connection. The VPN connection is configured by Trend to access only the relevant users site(s). There are three methods of connecting to the remote site; VPN Agent, VPN Client and Trend Connect Modem. The solution that best fits your requirements will be suggested by your Trend representative, after careful analysis of your needs. The VPN Agent and VPN Client solutions both allow you to connect, over the internet, to the remote Trend Ethernet network over the VPN. The only difference is that the VPN Agent software automatically connects to the remote site every time the PC on which it is installed is switched on. This is useful for remote alarm monitoring using 963. The VPN Client must be manually connected by the user when it is required.
Features include:
Remote Ethernet connection to Trend Ethernet devices
Easily installed and commissioned by Trend trained personnel.
Trend managed Virtual Private Network (VPN)
Secure on-demand network
Uses HSUPA, HSDPA, UMTS (3G), EDGE, or GPRS connectivity
Enables full IQ3 functionality
12, 24 and 36 month contracts including 100MB of data per month (if this limit is exceeded, additional charges will be incurred)
3 different ways of connecting to suit your requirements; VPN Client, VPN Agent and Trend Connect Modem
1 license included for VPN Client, no license required for Trend Connect Modem solution
Additional licenses can be obtained at an extra charge
Ongoing maintenance of the modem and support for the remote connection supplied
Optional extras can be supplied to order e.g. a secure mounting kit and a panel antenna to provide greater signal strength

Accessories
Model: Ethernet adapter cable
Comments: For connection to Trend


CABLE/IQ246KIT

Honeywell IQ246 Controllers
Accessories

IQ246 cable set (4 cables) - 1 end unterminated



CLCH2EL1

Honeywell HVAC controller with configurable applications, and relay outputs, TIGER (CLTG38)
COACH for selection of control software

COACH for End user



CLCH2EL2

Honeywell HVAC controller with configurable applications, and relay outputs, TIGER (CLTG38)
COACH for selection of control software

COACH for Expert End user



CLCH2EL3

Honeywell HVAC controller with configurable applications, and relay outputs, TIGER (CLTG38)
COACH for selection of control software

COACH for Partner



CLCH2EL4

Honeywell HVAC controller with configurable applications, and relay outputs, TIGER (CLTG38)
COACH for selection of control software

COACH for Expert Partner



CLEMAN25

Honeywell ENERGY MANAGEMENT ESSENTIALS

ENERGY MANAGEMENT ESSENTIALS is a comprehensive and intuitive energy monitoring and targeting software, providing an impressive range of techniques for managing all aspects of energy related data.
It is fully web-enabled and able to integrate data from a wide range of existing systems. HAWK and ARENA AX can provide data from most of the metering devices used in the market providing more than 30 different protocols. ARENA supports the data exchange between LON, M-Bus and all the existing Honeywell installed base to the energy management suite. It enables an integrated solution, allowing the user to collate and manage all aspects of their energy data at a central location.
Features:
Collect metering data
Monitor energy consumption
Analyze energy profiles
Detect waste of energy
Optimize energy efficiency
Translate raw energy values into monetary units
Plan energy consumption with budgets
Compare the real consumption against budgets
Report all the important data to energy managers
Dashboards to raise the awareness of building occupants

ENERGY MANAGEMENT ESSENTIALS supporting:
Product description: 25 meter points, 1 advanced user, 1 express user


CLEMAN50

Honeywell ENERGY MANAGEMENT ESSENTIALS

ENERGY MANAGEMENT ESSENTIALS is a comprehensive and intuitive energy monitoring and targeting software, providing an impressive range of techniques for managing all aspects of energy related data.
It is fully web-enabled and able to integrate data from a wide range of existing systems. HAWK and ARENA AX can provide data from most of the metering devices used in the market providing more than 30 different protocols. ARENA supports the data exchange between LON, M-Bus and all the existing Honeywell installed base to the energy management suite. It enables an integrated solution, allowing the user to collate and manage all aspects of their energy data at a central location.
Features:
Collect metering data
Monitor energy consumption
Analyze energy profiles
Detect waste of energy
Optimize energy efficiency
Translate raw energy values into monetary units
Plan energy consumption with budgets
Compare the real consumption against budgets
Report all the important data to energy managers
Dashboards to raise the awareness of building occupants

ENERGY MANAGEMENT ESSENTIALS supporting:
Product description: 50 meter points, 1 advanced user, 1 express user


CLEMAN75

Honeywell ENERGY MANAGEMENT ESSENTIALS

ENERGY MANAGEMENT ESSENTIALS is a comprehensive and intuitive energy monitoring and targeting software, providing an impressive range of techniques for managing all aspects of energy related data.
It is fully web-enabled and able to integrate data from a wide range of existing systems. HAWK and ARENA AX can provide data from most of the metering devices used in the market providing more than 30 different protocols. ARENA supports the data exchange between LON, M-Bus and all the existing Honeywell installed base to the energy management suite. It enables an integrated solution, allowing the user to collate and manage all aspects of their energy data at a central location.
Features:
Collect metering data
Monitor energy consumption
Analyze energy profiles
Detect waste of energy
Optimize energy efficiency
Translate raw energy values into monetary units
Plan energy consumption with budgets
Compare the real consumption against budgets
Report all the important data to energy managers
Dashboards to raise the awareness of building occupants

ENERGY MANAGEMENT ESSENTIALS supporting:
Product description: 75 meter points, 1 advanced user, 3 express user


CLFA100LB0C

Honeywell Programmable, universal BACnet Building Controller, FALCON CLFA

BACnet DDC controller for all HVAC control applications, and building automation functionalities. The controller can be applied for stand-alone operation, dial-up and in network systems.
For all buildings.
Control software: free programmable with CentraLine CARE software
programmable with standard ModAL software modules
Hardware inputs: input modules available for:
measurement of temperature, relative humidity, pressure etc.
contact status from relays, thermostats etc.
Hardware outputs: output modules available for:
control devices like servomotors
switching devices like pumps, ventilators
Operator panels: full functional operation via Internet Browser and any standard Notebook, Laptop or PC. Access options are RS232, USB port or Ethernet.
Management applications: ARENA
Stand-alone operation: yes
Bus system description: standard BACnet/IP communication with other BACnet controllers and BACnet Front-Ends
standard LonWorks(R) communication with field I/O's and field devices
Transceiver type: LonWorks(R) FTT10A
Application cards: compact Flash (CF) card port for optional CF cards Type 1 and 2, in order to extend the onboard trend buffer.
Mounting: DIN rail and wall
Protection class: IP20
Type of terminals: plug-in screw terminals (LON, power, onboard I/O's), RJ45 (Ethernet, LON)
Memory back-up: goldcap capacitor for 72 hours buffer
Input/output modules to be connected to the DDC-controller via the LonWorks(R) bus connector. Embedded Web-server for direct Access via Internet Browser. BACnet PICS and BTL test certificate on request.
BACnet IP: yes
Power supply: 24Vacdc
Modem connection: directly connectable
LonWorks(R) connection: directly connectable


Product description: Controller with 104 Network Variables


CLFA300LB0C

Honeywell Programmable, universal BACnet Building Controller, FALCON CLFA

BACnet DDC controller for all HVAC control applications, and building automation functionalities. The controller can be applied for stand-alone operation, dial-up and in network systems.
For all buildings.
Control software: free programmable with CentraLine CARE software
programmable with standard ModAL software modules
Hardware inputs: input modules available for:
measurement of temperature, relative humidity, pressure etc.
contact status from relays, thermostats etc.
Hardware outputs: output modules available for:
control devices like servomotors
switching devices like pumps, ventilators
Operator panels: full functional operation via Internet Browser and any standard Notebook, Laptop or PC. Access options are RS232, USB port or Ethernet.
Management applications: ARENA
Stand-alone operation: yes
Bus system description: standard BACnet/IP communication with other BACnet controllers and BACnet Front-Ends
standard LonWorks(R) communication with field I/O's and field devices
Transceiver type: LonWorks(R) FTT10A
Application cards: compact Flash (CF) card port for optional CF cards Type 1 and 2, in order to extend the onboard trend buffer.
Mounting: DIN rail and wall
Protection class: IP20
Type of terminals: plug-in screw terminals (LON, power, onboard I/O's), RJ45 (Ethernet, LON)
Memory back-up: goldcap capacitor for 72 hours buffer
Input/output modules to be connected to the DDC-controller via the LonWorks(R) bus connector. Embedded Web-server for direct Access via Internet Browser. BACnet PICS and BTL test certificate on request.
BACnet IP: yes
Power supply: 24Vacdc
Modem connection: directly connectable
LonWorks(R) connection: directly connectable


Product description: Controller with 300 Network Variables


CLFA50LB0C

Honeywell Programmable, universal BACnet Building Controller, FALCON CLFA

BACnet DDC controller for all HVAC control applications, and building automation functionalities. The controller can be applied for stand-alone operation, dial-up and in network systems.
For all buildings.
Control software: free programmable with CentraLine CARE software
programmable with standard ModAL software modules
Hardware inputs: input modules available for:
measurement of temperature, relative humidity, pressure etc.
contact status from relays, thermostats etc.
Hardware outputs: output modules available for:
control devices like servomotors
switching devices like pumps, ventilators
Operator panels: full functional operation via Internet Browser and any standard Notebook, Laptop or PC. Access options are RS232, USB port or Ethernet.
Management applications: ARENA
Stand-alone operation: yes
Bus system description: standard BACnet/IP communication with other BACnet controllers and BACnet Front-Ends
standard LonWorks(R) communication with field I/O's and field devices
Transceiver type: LonWorks(R) FTT10A
Application cards: compact Flash (CF) card port for optional CF cards Type 1 and 2, in order to extend the onboard trend buffer.
Mounting: DIN rail and wall
Protection class: IP20
Type of terminals: plug-in screw terminals (LON, power, onboard I/O's), RJ45 (Ethernet, LON)
Memory back-up: goldcap capacitor for 72 hours buffer
Input/output modules to be connected to the DDC-controller via the LonWorks(R) bus connector. Embedded Web-server for direct Access via Internet Browser. BACnet PICS and BTL test certificate on request.
BACnet IP: yes
Power supply: 24Vacdc
Modem connection: directly connectable
LonWorks(R) connection: directly connectable


Product description: Controller with 52 Network Variables


CLFA600LB0C

Honeywell Programmable, universal BACnet Building Controller, FALCON CLFA

BACnet DDC controller for all HVAC control applications, and building automation functionalities. The controller can be applied for stand-alone operation, dial-up and in network systems.
For all buildings.
Control software: free programmable with CentraLine CARE software
programmable with standard ModAL software modules
Hardware inputs: input modules available for:
measurement of temperature, relative humidity, pressure etc.
contact status from relays, thermostats etc.
Hardware outputs: output modules available for:
control devices like servomotors
switching devices like pumps, ventilators
Operator panels: full functional operation via Internet Browser and any standard Notebook, Laptop or PC. Access options are RS232, USB port or Ethernet.
Management applications: ARENA
Stand-alone operation: yes
Bus system description: standard BACnet/IP communication with other BACnet controllers and BACnet Front-Ends
standard LonWorks(R) communication with field I/O's and field devices
Transceiver type: LonWorks(R) FTT10A
Application cards: compact Flash (CF) card port for optional CF cards Type 1 and 2, in order to extend the onboard trend buffer.
Mounting: DIN rail and wall
Protection class: IP20
Type of terminals: plug-in screw terminals (LON, power, onboard I/O's), RJ45 (Ethernet, LON)
Memory back-up: goldcap capacitor for 72 hours buffer
Input/output modules to be connected to the DDC-controller via the LonWorks(R) bus connector. Embedded Web-server for direct Access via Internet Browser. BACnet PICS and BTL test certificate on request.
BACnet IP: yes
Power supply: 24Vacdc
Modem connection: directly connectable
LonWorks(R) connection: directly connectable


Product description: Controller with 600 Network Variables


CLIF-CBUS1-PC

Honeywell SymmetrE Building Management Workstation, R410
SymmetrE Network Adaptors

C-Bus/TCP/IP adapter for one C-Bus



CLIF-CBUS2-PC

Honeywell SymmetrE Building Management Workstation, R410
SymmetrE Network Adaptors

C-Bus/TCP/IP adapter for two C-Busses



CLLA20-10NSR18

Honeywell CentraLine Linear Actuator 20 mm 1800 N, CLLA20 CLLA38

Stem force: 1800N
Protection class: IP54
Position indication: scale plate
Manual operation: yes
End switches: optional

20 mm; 1800 N
Stroke: 20mm
Control input signal: 0/2..10V=
Power supply: 24Vac
Runtime: 1.9min
Position feedback: 2..10V=


CLLA20-10NSR6

Honeywell CentraLine Linear Actuator 20 mm 600 N, CLLA20

Stroke: 20mm
Stem force: 600N
Protection class: IP54
Position indication: scale plate
Manual operation: yes
End switches: optional
For 0/2..10V control models:
control action is reversable
stem position at control signal loss is adjustable

20 mm; 600 N
Control input signal: 0/2..10V=
Supply voltage: 24 Vac
Spring return: no
Power loss action: no
Runtime: 60s
Position feedback: 2..10V=


CLLA20-10SD6

Honeywell CentraLine Linear Actuator 20 mm 600 N, CLLA20

Stroke: 20mm
Stem force: 600N
Protection class: IP54
Position indication: scale plate
Manual operation: yes
End switches: optional
For 0/2..10V control models:
control action is reversable
stem position at control signal loss is adjustable

20 mm; 600 N, Spring return
Control input signal: 0/2..10V=
Supply voltage: 24 Vac
Spring return: yes
Power loss action: stem extends
Runtime: 108s
Position feedback: 2..10V=


CLLA20-10SU6

Honeywell CentraLine Linear Actuator 20 mm 600 N, CLLA20

Stroke: 20mm
Stem force: 600N
Protection class: IP54
Position indication: scale plate
Manual operation: yes
End switches: optional
For 0/2..10V control models:
control action is reversable
stem position at control signal loss is adjustable

20 mm; 600 N, Spring return
Control input signal: 0/2..10V=
Supply voltage: 24 Vac
Spring return: yes
Power loss action: stem retracts
Runtime: 108s
Position feedback: 2..10V=


CLLA20-230NSR18

Honeywell CentraLine Linear Actuator 20 mm 1800 N, CLLA20 CLLA38

Stem force: 1800N
Protection class: IP54
Position indication: scale plate
Manual operation: yes
End switches: optional

20 mm; 1800 N
Stroke: 20mm
Control input signal: 3-pt
Power supply: 230Vac
Runtime: 1.9min
Position feedback: no


CLLA20-230NSR6

Honeywell CentraLine Linear Actuator 20 mm 600 N, CLLA20

Stroke: 20mm
Stem force: 600N
Protection class: IP54
Position indication: scale plate
Manual operation: yes
End switches: optional
For 0/2..10V control models:
control action is reversable
stem position at control signal loss is adjustable

20 mm; 600 N
Control input signal: 3-pt
Supply voltage: 230 Vac
Spring return: no
Power loss action: no
Runtime: 60s
Position feedback: optional


CLLA20-230SD6

Honeywell CentraLine Linear Actuator 20 mm 600 N, CLLA20

Stroke: 20mm
Stem force: 600N
Protection class: IP54
Position indication: scale plate
Manual operation: yes
End switches: optional
For 0/2..10V control models:
control action is reversable
stem position at control signal loss is adjustable

20 mm; 600 N, Spring return
Control input signal: 3-pt
Supply voltage: 230 Vac
Spring return: yes
Power loss action: stem extends
Runtime: 108s
Position feedback: no


CLLA20-24NSR18

Honeywell CentraLine Linear Actuator 20 mm 1800 N, CLLA20 CLLA38

Stem force: 1800N
Protection class: IP54
Position indication: scale plate
Manual operation: yes
End switches: optional

20 mm; 1800 N
Stroke: 20mm
Control input signal: 3-pt
Power supply: 24Vac
Runtime: 1.9min
Position feedback: optional


CLLA20-24NSR6

Honeywell CentraLine Linear Actuator 20 mm 600 N, CLLA20

Stroke: 20mm
Stem force: 600N
Protection class: IP54
Position indication: scale plate
Manual operation: yes
End switches: optional
For 0/2..10V control models:
control action is reversable
stem position at control signal loss is adjustable

20 mm; 600 N
Control input signal: 3-pt
Supply voltage: 24 Vac
Spring return: no
Power loss action: no
Runtime: 60s
Position feedback: optional


CLLA20-24SD6

Honeywell CentraLine Linear Actuator 20 mm 600 N, CLLA20

Stroke: 20mm
Stem force: 600N
Protection class: IP54
Position indication: scale plate
Manual operation: yes
End switches: optional
For 0/2..10V control models:
control action is reversable
stem position at control signal loss is adjustable

20 mm; 600 N, Spring return
Control input signal: 3-pt
Supply voltage: 24 Vac
Spring return: yes
Power loss action: stem extends
Runtime: 108s
Position feedback: no


CLLA38-10NSR18

Honeywell CentraLine Linear Actuator 20 mm 1800 N, CLLA20 CLLA38

Stem force: 1800N
Protection class: IP54
Position indication: scale plate
Manual operation: yes
End switches: optional

38 mm; 1800 N
Stroke: 38mm
Control input signal: 0/2..10V=
Power supply: 24Vac
Runtime: 3.5min
Position feedback: 2..10V=


CLLA38-230NSR18

Honeywell CentraLine Linear Actuator 20 mm 1800 N, CLLA20 CLLA38

Stem force: 1800N
Protection class: IP54
Position indication: scale plate
Manual operation: yes
End switches: optional

38 mm; 1800 N
Stroke: 38mm
Control input signal: 3-pt
Power supply: 230Vac
Runtime: 3.5min
Position feedback: no


CLLA38-24NSR18

Honeywell CentraLine Linear Actuator 20 mm 1800 N, CLLA20 CLLA38

Stem force: 1800N
Protection class: IP54
Position indication: scale plate
Manual operation: yes
End switches: optional

38 mm; 1800 N
Stroke: 38mm
Control input signal: 3-pt
Power supply: 24Vac
Runtime: 3.5min
Position feedback: optional


CLMMI00N22

Honeywell HVAC controller with configurable applications, and relay outputs, TIGER (CLTG38)
Additional products for TIGER controllers

External Operator panel with cable (5 m); wall/door mounting



CLMMI00N31

Honeywell HVAC controller with configurable applications, and relay outputs, TIGER (CLTG38)
Additional products for TIGER controllers

CentraLine Touch operator interface



CLMMI8-1

Honeywell CentraLine Touch Screen operator interface, CLMMI8

Touch Screen 8-inch color operator interface. For use with CentraLine AX and FALCON web-served graphical pages.
It includes audio, Wi-Fi, and a wired IP connection.
The interface is based on a fanless Atom-powered PC platform which has been specially configured to enable easy set-up. It uses a custom-embedded Windows XP running Browser in kiosk mode.
Features:
800 x 600 pixels
flat front panel and low profile
wall or panel-mounting
power supply and mounting kit included (IP64)


CLPD01240W

Honeywell Demo kits

Panther Demo Kits
Product description: Panther DEMO Kit 240V, 3 PIN Plug with controller


CLPDU02240W

Honeywell Demo kits

Panther Demo Kits
Product description: Panther DEMO Kit 240V, SCHUKD 2 PIN plug and controller


CLRA20-10

Honeywell CentraLine Rotary Actuator, CLRA

Protection class: IP54
Position indication: reversable scale plate
Angle of rotation: 90o
Manual operation: yes
Torque: 20Nm

Modulating control
Power supply: 24Vac
Control input signal: 0/2..10V=
Runtime: 3.0min


CLRA20-230

Honeywell CentraLine Rotary Actuator, CLRA

Protection class: IP54
Position indication: reversable scale plate
Angle of rotation: 90o
Manual operation: yes
Torque: 20Nm


Power supply: 230Vac
Control input signal: 3-pt
Runtime: 1.6min


CLSN1T10

Honeywell Outdoor temperature sensor NTC, CLSN1T

Temperature element: NTC20k
Temperature range: -30...60C
Mounting place: wall outside
Housing (HxWxD): 85mm|65mm|70mm
Wiring terminals: 2
Protection class: IP30


CLSN2T10

Honeywell Water temperature sensor, NTC, CLSN2T

Water temperature sensor strap-on.
Temperature element: NTC20k
Temperature range: 0...110C
Mounting place: strap on pipe
Housing (HxWxD): 65mm|50mm|33mm
Wiring terminals: 2
Protection class: IP30


CLSN3T120

Honeywell Water temperature sensor NTC, cable type, CLSN3T

Watertight temperature sensor with sensor cartridge.
Temperature element: NTC20k
Temperature range: -20...110C
Mounting place: universal
Immersion depth: min. 50mm
Applicable well length: 135mm
Sensing element (dia x L): 6.5mm|50mm
Wiring terminals: 2
Cable length: 2m
Protection class: IP64


CLSN4T11

Honeywell Air duct temperature sensor, NTC, CLSN4T

Humidity 5..95 %rh, non condensing.
Temperature element: NTC20k
Temperature range: -20...80C
Mounting place: air duct
Immersion depth: 280mm
Housing (HxWxD): 65mm|50mm|33mm
Wiring terminals: 2
Protection class: IP30 (in vertical orientation)


CLSN5T11B

Honeywell Water temperature sensor, NTC, CLSN5T

Water temperature sensor with well.
Protection class: IP54
Temperature element: NTC20k
Mounting place: in pipe
Immersion well thread: G1/2"
Wiring terminals: 2


Temperature range: -25...130C
Immersion well material: brass
Immersion depth: 135mm


CLSN5T11S

Honeywell Water temperature sensor, NTC, CLSN5T

Water temperature sensor with well.
Protection class: IP54
Temperature element: NTC20k
Mounting place: in pipe
Immersion well thread: G1/2"
Wiring terminals: 2


Temperature range: -25...130C
Immersion well material: stainless steel
Immersion depth: 135mm


CLSN5T12B

Honeywell Water temperature sensor, NTC, CLSN5T

Water temperature sensor with well.
Protection class: IP54
Temperature element: NTC20k
Mounting place: in pipe
Immersion well thread: G1/2"
Wiring terminals: 2


Temperature range: -25...130C
Immersion well material: brass
Immersion depth: 300mm


CLSN5T12S

Honeywell Water temperature sensor, NTC, CLSN5T

Water temperature sensor with well.
Protection class: IP54
Temperature element: NTC20k
Mounting place: in pipe
Immersion well thread: G1/2"
Wiring terminals: 2


Temperature range: -25...130C
Immersion well material: stainless steel
Immersion depth: 300mm


CLTG00MMIN01

Honeywell HVAC controller with configurable applications, and relay outputs, TIGER (CLTG38)
Additional products for CLTG38L01

External operator panel with door mounting kit and flat cable (1.5 m)



CLTG38EXPN01

Honeywell HVAC controller with configurable applications, and relay outputs, TIGER (CLTG38)
Additional products for TIGER controllers

I/O expansion board, 8 AI, 14 DI, 4 AO, 12 DO (3 SPDT, 9 SPST) with DIN rail mounting clip and flat cable (350 mm). Max. 1 board/controller.



CLTG38L01

Honeywell HVAC controller with configurable applications, and relay outputs, TIGER (CLTG38)

CentraLine controller with relay outputs, for HVAC applications. The controller can be applied for stand-alone operation, dial-up and in network systems.
Control software: control software embedded, with hundreds of different selectable applications and parameter settings
Hardware inputs: Analog Inputs (AI) for NTC20k sensors, 0..10 V, 0/4..20 mA active sensors (apply signal separator!) or slow switching dry contact
Digital Inputs (DI) for potential free contacts, 24 Vdc or 24 Vac
Hardware outputs: Analogue Outputs (AO) 0..10V=
Digital Outputs (DO) relay contact SPDT or SPST
Management applications: ARENA / RANGER
Stand-alone operation: yes
Bus system description: LonWorks(R) bus for data exchange with other TIGER, or PANTHER controllers, and building automation management systems with ARENA, or alarm monitoring with RANGER
Transceiver type: LonWorks(R) FTT10A
Mounting: DIN rail
Protection class: IP30
Type of terminals: screw terminals with terminal block
Memory back-up: goldcap capacitor for 72 hours buffer
Power supply: 24Vac
LonWorks(R) connection: directly connectable
Use COACH software from CentraLine to select the right control software for the required installation.

TIGER controller; 8 AI, 14 DI, 4 AO, 12 DO (3 SPDT, 9 SPST)
Product description: TIGER controller with LON


CLTG38L11

Honeywell HVAC controller with configurable applications, and relay outputs, TIGER (CLTG38)

CentraLine controller with relay outputs, for HVAC applications. The controller can be applied for stand-alone operation, dial-up and in network systems.
Control software: control software embedded, with hundreds of different selectable applications and parameter settings
Hardware inputs: Analog Inputs (AI) for NTC20k sensors, 0..10 V, 0/4..20 mA active sensors (apply signal separator!) or slow switching dry contact
Digital Inputs (DI) for potential free contacts, 24 Vdc or 24 Vac
Hardware outputs: Analogue Outputs (AO) 0..10V=
Digital Outputs (DO) relay contact SPDT or SPST
Management applications: ARENA / RANGER
Stand-alone operation: yes
Bus system description: LonWorks(R) bus for data exchange with other TIGER, or PANTHER controllers, and building automation management systems with ARENA, or alarm monitoring with RANGER
Transceiver type: LonWorks(R) FTT10A
Mounting: DIN rail
Protection class: IP30
Type of terminals: screw terminals with terminal block
Memory back-up: goldcap capacitor for 72 hours buffer
Power supply: 24Vac
LonWorks(R) connection: directly connectable
Use COACH software from CentraLine to select the right control software for the required installation.

TIGER controller; 8 AI, 14 DI, 4 AO, 12 DO (3 SPDT, 9 SPST)
Product description: TIGER controller with LON + operator panel


CLVF2W0.6P16

Honeywell CentraLine Valve Flanged, 2-way PN16, CLVF2

For heating and air conditioning; hot/cold water quality VDI2035.
Valve type: 2-way
Medium type: steam (water)
Materials: body cast iron GG25, trim stainless steel
Action to open: stem up
Nominal pressure: PN16
Port connection: flanges ISO7005
Flow char.: mod.equal%

20 mm
DN size: 15mm
Kvs value: 0.63
Close off pressure with 600N motor: 1600kPa
Close off pressure with 1800N motor: no
Stroke: 20mm
Media temp.: 2...170C


CLVF2W1.0P16

Honeywell CentraLine Valve Flanged, 2-way PN16, CLVF2

For heating and air conditioning; hot/cold water quality VDI2035.
Valve type: 2-way
Medium type: steam (water)
Materials: body cast iron GG25, trim stainless steel
Action to open: stem up
Nominal pressure: PN16
Port connection: flanges ISO7005
Flow char.: mod.equal%

20 mm
DN size: 15mm
Kvs value: 1
Close off pressure with 600N motor: 1600kPa
Close off pressure with 1800N motor: no
Stroke: 20mm
Media temp.: 2...170C


CLVF2W1.6P16

Honeywell CentraLine Valve Flanged, 2-way PN16, CLVF2

For heating and air conditioning; hot/cold water quality VDI2035.
Valve type: 2-way
Medium type: steam (water)
Materials: body cast iron GG25, trim stainless steel
Action to open: stem up
Nominal pressure: PN16
Port connection: flanges ISO7005
Flow char.: mod.equal%

20 mm
DN size: 15mm
Kvs value: 1.6
Close off pressure with 600N motor: 1600kPa
Close off pressure with 1800N motor: no
Stroke: 20mm
Media temp.: 2...170C


CLVF2W100P16

Honeywell CentraLine Valve Flanged, 2-way PN16, CLVF2

For heating and air conditioning; hot/cold water quality VDI2035.
Valve type: 2-way
Medium type: steam (water)
Materials: body cast iron GG25, trim stainless steel
Action to open: stem up
Nominal pressure: PN16
Port connection: flanges ISO7005
Flow char.: mod.equal%

20 mm
DN size: 80mm
Kvs value: 100
Close off pressure with 600N motor: 50kPa
Close off pressure with 1800N motor: 230kPa
Stroke: 20mm
Media temp.: 2...170C


CLVF2W10P16

Honeywell CentraLine Valve Flanged, 2-way PN16, CLVF2

For heating and air conditioning; hot/cold water quality VDI2035.
Valve type: 2-way
Medium type: steam (water)
Materials: body cast iron GG25, trim stainless steel
Action to open: stem up
Nominal pressure: PN16
Port connection: flanges ISO7005
Flow char.: mod.equal%

20 mm
DN size: 25mm
Kvs value: 10
Close off pressure with 600N motor: 1000kPa
Close off pressure with 1800N motor: 1600kPa
Stroke: 20mm
Media temp.: 2...170C


CLVF2W160P16

Honeywell CentraLine Valve Flanged, 2-way PN16, CLVF2

For heating and air conditioning; hot/cold water quality VDI2035.
Valve type: 2-way
Medium type: steam (water)
Materials: body cast iron GG25, trim stainless steel
Action to open: stem up
Nominal pressure: PN16
Port connection: flanges ISO7005
Flow char.: mod.equal%

38 mm
DN size: 100mm
Kvs value: 160
Close off pressure with 600N motor: no
Close off pressure with 1800N motor: 230kPa
Stroke: 38mm
Media temp.: 2...200C


CLVF2W16P16

Honeywell CentraLine Valve Flanged, 2-way PN16, CLVF2

For heating and air conditioning; hot/cold water quality VDI2035.
Valve type: 2-way
Medium type: steam (water)
Materials: body cast iron GG25, trim stainless steel
Action to open: stem up
Nominal pressure: PN16
Port connection: flanges ISO7005
Flow char.: mod.equal%

20 mm
DN size: 32mm
Kvs value: 16
Close off pressure with 600N motor: 600kPa
Close off pressure with 1800N motor: 1600kPa
Stroke: 20mm
Media temp.: 2...170C


CLVF2W2.5P16

Honeywell CentraLine Valve Flanged, 2-way PN16, CLVF2

For heating and air conditioning; hot/cold water quality VDI2035.
Valve type: 2-way
Medium type: steam (water)
Materials: body cast iron GG25, trim stainless steel
Action to open: stem up
Nominal pressure: PN16
Port connection: flanges ISO7005
Flow char.: mod.equal%

20 mm
DN size: 15mm
Kvs value: 2.5
Close off pressure with 600N motor: 1000kPa
Close off pressure with 1800N motor: 1600kPa
Stroke: 20mm
Media temp.: 2...170C


CLVF2W250P16

Honeywell CentraLine Valve Flanged, 2-way PN16, CLVF2

For heating and air conditioning; hot/cold water quality VDI2035.
Valve type: 2-way
Medium type: steam (water)
Materials: body cast iron GG25, trim stainless steel
Action to open: stem up
Nominal pressure: PN16
Port connection: flanges ISO7005
Flow char.: mod.equal%

38 mm
DN size: 125mm
Kvs value: 250
Close off pressure with 600N motor: no
Close off pressure with 1800N motor: 90kPa
Stroke: 38mm
Media temp.: 2...200C


CLVF2W25P16

Honeywell CentraLine Valve Flanged, 2-way PN16, CLVF2

For heating and air conditioning; hot/cold water quality VDI2035.
Valve type: 2-way
Medium type: steam (water)
Materials: body cast iron GG25, trim stainless steel
Action to open: stem up
Nominal pressure: PN16
Port connection: flanges ISO7005
Flow char.: mod.equal%

20 mm
DN size: 40mm
Kvs value: 25
Close off pressure with 600N motor: 350kPa
Close off pressure with 1800N motor: 1300kPa
Stroke: 20mm
Media temp.: 2...170C


CLVF2W360P16

Honeywell CentraLine Valve Flanged, 2-way PN16, CLVF2

For heating and air conditioning; hot/cold water quality VDI2035.
Valve type: 2-way
Medium type: steam (water)
Materials: body cast iron GG25, trim stainless steel
Action to open: stem up
Nominal pressure: PN16
Port connection: flanges ISO7005
Flow char.: mod.equal%

38 mm
DN size: 150mm
Kvs value: 360
Close off pressure with 600N motor: no
Close off pressure with 1800N motor: 90kPa
Stroke: 38mm
Media temp.: 2...200C


CLVF2W4.0P16

Honeywell CentraLine Valve Flanged, 2-way PN16, CLVF2

For heating and air conditioning; hot/cold water quality VDI2035.
Valve type: 2-way
Medium type: steam (water)
Materials: body cast iron GG25, trim stainless steel
Action to open: stem up
Nominal pressure: PN16
Port connection: flanges ISO7005
Flow char.: mod.equal%

20 mm
DN size: 15mm
Kvs value: 4
Close off pressure with 600N motor: 1000kPa
Close off pressure with 1800N motor: 1600kPa
Stroke: 20mm
Media temp.: 2...170C


CLVF2W40P16

Honeywell CentraLine Valve Flanged, 2-way PN16, CLVF2

For heating and air conditioning; hot/cold water quality VDI2035.
Valve type: 2-way
Medium type: steam (water)
Materials: body cast iron GG25, trim stainless steel
Action to open: stem up
Nominal pressure: PN16
Port connection: flanges ISO7005
Flow char.: mod.equal%

20 mm
DN size: 50mm
Kvs value: 40
Close off pressure with 600N motor: 200kPa
Close off pressure with 1800N motor: 750kPa
Stroke: 20mm
Media temp.: 2...170C


CLVF2W6.3P16

Honeywell CentraLine Valve Flanged, 2-way PN16, CLVF2

For heating and air conditioning; hot/cold water quality VDI2035.
Valve type: 2-way
Medium type: steam (water)
Materials: body cast iron GG25, trim stainless steel
Action to open: stem up
Nominal pressure: PN16
Port connection: flanges ISO7005
Flow char.: mod.equal%

20 mm
DN size: 20mm
Kvs value: 6.3
Close off pressure with 600N motor: 1000kPa
Close off pressure with 1800N motor: 1600kPa
Stroke: 20mm
Media temp.: 2...170C


CLVF2W63P16

Honeywell CentraLine Valve Flanged, 2-way PN16, CLVF2

For heating and air conditioning; hot/cold water quality VDI2035.
Valve type: 2-way
Medium type: steam (water)
Materials: body cast iron GG25, trim stainless steel
Action to open: stem up
Nominal pressure: PN16
Port connection: flanges ISO7005
Flow char.: mod.equal%

20 mm
DN size: 65mm
Kvs value: 63
Close off pressure with 600N motor: 120kPa
Close off pressure with 1800N motor: 470kPa
Stroke: 20mm
Media temp.: 2...170C


CLVF3W100P16

Honeywell CentraLine Valve Flanged 3-way PN16, CLVF3

For heating and air conditioning; hot/cold water quality VDI2035; greenhouses.
Valve type: 3-way mixing
Medium type: water
Materials: body cast iron GG25, trim stainless steel
Action to open: stem down
Nominal pressure: PN16
Port connection: flanges ISO7005

20 mm
DN size: 80mm
Kvs value: 100
Close off pressure with 600N motor: 100kPa
Close off pressure with 1800N motor: 400kPa
Stroke: 20mm
Media temp.: 2...170C
Flow char.: mod.equal%


CLVF3W100P6

Honeywell CentraLine Valve Flanged 3-way PN6, CLVF3

For heating and air conditioning; hot/cold water quality VDI2035; greenhouses.
Valve type: 3-way mixing
Medium type: water
Materials: body cast iron GG25, trim stainless steel
Action to open: stem down
Nominal pressure: PN6
Port connection: flanges ISO7005
Flow char.: mod.equal%

20 mm
DN size: 80mm
Kvs value: 100
Close off pressure with 600N motor: 100kPa
Close off pressure with 1800N motor: 400kPa
Stroke: 20mm
Media temp.: 2...170C


CLVF3W10P16

Honeywell CentraLine Valve Flanged 3-way PN16, CLVF3

For heating and air conditioning; hot/cold water quality VDI2035; greenhouses.
Valve type: 3-way mixing
Medium type: water
Materials: body cast iron GG25, trim stainless steel
Action to open: stem down
Nominal pressure: PN16
Port connection: flanges ISO7005

20 mm
DN size: 25mm
Kvs value: 10
Close off pressure with 600N motor: 1000kPa
Close off pressure with 1800N motor: no
Stroke: 20mm
Media temp.: 2...170C
Flow char.: mod.equal%


CLVF3W10P6

Honeywell CentraLine Valve Flanged 3-way PN6, CLVF3

For heating and air conditioning; hot/cold water quality VDI2035; greenhouses.
Valve type: 3-way mixing
Medium type: water
Materials: body cast iron GG25, trim stainless steel
Action to open: stem down
Nominal pressure: PN6
Port connection: flanges ISO7005
Flow char.: mod.equal%

20 mm
DN size: 25mm
Kvs value: 10
Close off pressure with 600N motor: 600kPa
Close off pressure with 1800N motor: no
Stroke: 20mm
Media temp.: 2...170C


CLVF3W140P6

Honeywell CentraLine Valve Flanged 3-way PN6, CLVF3

For heating and air conditioning; hot/cold water quality VDI2035; greenhouses.
Valve type: 3-way mixing
Medium type: water
Materials: body cast iron GG25, trim stainless steel
Action to open: stem down
Nominal pressure: PN6
Port connection: flanges ISO7005
Flow char.: mod.equal%

38 mm
DN size: 100mm
Kvs value: 140
Close off pressure with 600N motor: no
Close off pressure with 1800N motor: 150kPa
Stroke: 38mm
Media temp.: 2...120C


CLVF3W160P16

Honeywell CentraLine Valve Flanged 3-way PN16, CLVF3

For heating and air conditioning; hot/cold water quality VDI2035; greenhouses.
Valve type: 3-way mixing
Medium type: water
Materials: body cast iron GG25, trim stainless steel
Action to open: stem down
Nominal pressure: PN16
Port connection: flanges ISO7005

38 mm
DN size: 100mm
Kvs value: 160
Close off pressure with 600N motor: no
Close off pressure with 1800N motor: 230kPa
Stroke: 38mm
Media temp.: 2...220C
Flow char.: linear


CLVF3W16P16

Honeywell CentraLine Valve Flanged 3-way PN16, CLVF3

For heating and air conditioning; hot/cold water quality VDI2035; greenhouses.
Valve type: 3-way mixing
Medium type: water
Materials: body cast iron GG25, trim stainless steel
Action to open: stem down
Nominal pressure: PN16
Port connection: flanges ISO7005

20 mm
DN size: 32mm
Kvs value: 16
Close off pressure with 600N motor: 790kPa
Close off pressure with 1800N motor: 1000kPa
Stroke: 20mm
Media temp.: 2...170C
Flow char.: mod.equal%


CLVF3W16P6

Honeywell CentraLine Valve Flanged 3-way PN6, CLVF3

For heating and air conditioning; hot/cold water quality VDI2035; greenhouses.
Valve type: 3-way mixing
Medium type: water
Materials: body cast iron GG25, trim stainless steel
Action to open: stem down
Nominal pressure: PN6
Port connection: flanges ISO7005
Flow char.: mod.equal%

20 mm
DN size: 32mm
Kvs value: 16
Close off pressure with 600N motor: 600kPa
Close off pressure with 1800N motor: no
Stroke: 20mm
Media temp.: 2...170C


CLVF3W2.5P16

Honeywell CentraLine Valve Flanged 3-way PN16, CLVF3

For heating and air conditioning; hot/cold water quality VDI2035; greenhouses.
Valve type: 3-way mixing
Medium type: water
Materials: body cast iron GG25, trim stainless steel
Action to open: stem down
Nominal pressure: PN16
Port connection: flanges ISO7005

20 mm
DN size: 15mm
Kvs value: 2.5
Close off pressure with 600N motor: 1000kPa
Close off pressure with 1800N motor: no
Stroke: 20mm
Media temp.: 2...170C
Flow char.: mod.equal%


CLVF3W2.5P6

Honeywell CentraLine Valve Flanged 3-way PN6, CLVF3

For heating and air conditioning; hot/cold water quality VDI2035; greenhouses.
Valve type: 3-way mixing
Medium type: water
Materials: body cast iron GG25, trim stainless steel
Action to open: stem down
Nominal pressure: PN6
Port connection: flanges ISO7005
Flow char.: mod.equal%

20 mm
DN size: 15mm
Kvs value: 2.5
Close off pressure with 600N motor: 600kPa
Close off pressure with 1800N motor: no
Stroke: 20mm
Media temp.: 2...170C


CLVF3W220P6

Honeywell CentraLine Valve Flanged 3-way PN6, CLVF3

For heating and air conditioning; hot/cold water quality VDI2035; greenhouses.
Valve type: 3-way mixing
Medium type: water
Materials: body cast iron GG25, trim stainless steel
Action to open: stem down
Nominal pressure: PN6
Port connection: flanges ISO7005
Flow char.: mod.equal%

38 mm
DN size: 125mm
Kvs value: 220
Close off pressure with 600N motor: no
Close off pressure with 1800N motor: 120kPa
Stroke: 38mm
Media temp.: 2...120C


CLVF3W250P16

Honeywell CentraLine Valve Flanged 3-way PN16, CLVF3

For heating and air conditioning; hot/cold water quality VDI2035; greenhouses.
Valve type: 3-way mixing
Medium type: water
Materials: body cast iron GG25, trim stainless steel
Action to open: stem down
Nominal pressure: PN16
Port connection: flanges ISO7005

38 mm
DN size: 125mm
Kvs value: 250
Close off pressure with 600N motor: no
Close off pressure with 1800N motor: 90kPa
Stroke: 38mm
Media temp.: 2...220C
Flow char.: linear


CLVF3W25P16

Honeywell CentraLine Valve Flanged 3-way PN16, CLVF3

For heating and air conditioning; hot/cold water quality VDI2035; greenhouses.
Valve type: 3-way mixing
Medium type: water
Materials: body cast iron GG25, trim stainless steel
Action to open: stem down
Nominal pressure: PN16
Port connection: flanges ISO7005

20 mm
DN size: 40mm
Kvs value: 25
Close off pressure with 600N motor: 480kPa
Close off pressure with 1800N motor: 1000kPa
Stroke: 20mm
Media temp.: 2...170C
Flow char.: mod.equal%


CLVF3W25P6

Honeywell CentraLine Valve Flanged 3-way PN6, CLVF3

For heating and air conditioning; hot/cold water quality VDI2035; greenhouses.
Valve type: 3-way mixing
Medium type: water
Materials: body cast iron GG25, trim stainless steel
Action to open: stem down
Nominal pressure: PN6
Port connection: flanges ISO7005
Flow char.: mod.equal%

20 mm
DN size: 40mm
Kvs value: 25
Close off pressure with 600N motor: 480kPa
Close off pressure with 1800N motor: 600kPa
Stroke: 20mm
Media temp.: 2...170C


CLVF3W310P6

Honeywell CentraLine Valve Flanged 3-way PN6, CLVF3

For heating and air conditioning; hot/cold water quality VDI2035; greenhouses.
Valve type: 3-way mixing
Medium type: water
Materials: body cast iron GG25, trim stainless steel
Action to open: stem down
Nominal pressure: PN6
Port connection: flanges ISO7005
Flow char.: mod.equal%

38 mm
DN size: 150mm
Kvs value: 310
Close off pressure with 600N motor: no
Close off pressure with 1800N motor: 80kPa
Stroke: 38mm
Media temp.: 2...120C


CLVF3W360P16

Honeywell CentraLine Valve Flanged 3-way PN16, CLVF3

For heating and air conditioning; hot/cold water quality VDI2035; greenhouses.
Valve type: 3-way mixing
Medium type: water
Materials: body cast iron GG25, trim stainless steel
Action to open: stem down
Nominal pressure: PN16
Port connection: flanges ISO7005

38 mm
DN size: 150mm
Kvs value: 360
Close off pressure with 600N motor: no
Close off pressure with 1800N motor: 90kPa
Stroke: 38mm
Media temp.: 2...220C
Flow char.: linear


CLVF3W4.0P16

Honeywell CentraLine Valve Flanged 3-way PN16, CLVF3

For heating and air conditioning; hot/cold water quality VDI2035; greenhouses.
Valve type: 3-way mixing
Medium type: water
Materials: body cast iron GG25, trim stainless steel
Action to open: stem down
Nominal pressure: PN16
Port connection: flanges ISO7005

20 mm
DN size: 15mm
Kvs value: 4
Close off pressure with 600N motor: 1000kPa
Close off pressure with 1800N motor: no
Stroke: 20mm
Media temp.: 2...170C
Flow char.: mod.equal%


CLVF3W4.0P6

Honeywell CentraLine Valve Flanged 3-way PN6, CLVF3

For heating and air conditioning; hot/cold water quality VDI2035; greenhouses.
Valve type: 3-way mixing
Medium type: water
Materials: body cast iron GG25, trim stainless steel
Action to open: stem down
Nominal pressure: PN6
Port connection: flanges ISO7005
Flow char.: mod.equal%

20 mm
DN size: 15mm
Kvs value: 4
Close off pressure with 600N motor: 600kPa
Close off pressure with 1800N motor: no
Stroke: 20mm
Media temp.: 2...170C


CLVF3W40P16

Honeywell CentraLine Valve Flanged 3-way PN16, CLVF3

For heating and air conditioning; hot/cold water quality VDI2035; greenhouses.
Valve type: 3-way mixing
Medium type: water
Materials: body cast iron GG25, trim stainless steel
Action to open: stem down
Nominal pressure: PN16
Port connection: flanges ISO7005

20 mm
DN size: 50mm
Kvs value: 40
Close off pressure with 600N motor: 260kPa
Close off pressure with 1800N motor: 1000kPa
Stroke: 20mm
Media temp.: 2...170C
Flow char.: mod.equal%


CLVF3W40P6

Honeywell CentraLine Valve Flanged 3-way PN6, CLVF3

For heating and air conditioning; hot/cold water quality VDI2035; greenhouses.
Valve type: 3-way mixing
Medium type: water
Materials: body cast iron GG25, trim stainless steel
Action to open: stem down
Nominal pressure: PN6
Port connection: flanges ISO7005
Flow char.: mod.equal%

20 mm
DN size: 50mm
Kvs value: 40
Close off pressure with 600N motor: 260kPa
Close off pressure with 1800N motor: 600kPa
Stroke: 20mm
Media temp.: 2...170C


CLVF3W6.3P16

Honeywell CentraLine Valve Flanged 3-way PN16, CLVF3

For heating and air conditioning; hot/cold water quality VDI2035; greenhouses.
Valve type: 3-way mixing
Medium type: water
Materials: body cast iron GG25, trim stainless steel
Action to open: stem down
Nominal pressure: PN16
Port connection: flanges ISO7005

20 mm
DN size: 20mm
Kvs value: 6.3
Close off pressure with 600N motor: 1000kPa
Close off pressure with 1800N motor: no
Stroke: 20mm
Media temp.: 2...170C
Flow char.: mod.equal%


CLVF3W6.3P6

Honeywell CentraLine Valve Flanged 3-way PN6, CLVF3

For heating and air conditioning; hot/cold water quality VDI2035; greenhouses.
Valve type: 3-way mixing
Medium type: water
Materials: body cast iron GG25, trim stainless steel
Action to open: stem down
Nominal pressure: PN6
Port connection: flanges ISO7005
Flow char.: mod.equal%

20 mm
DN size: 20mm
Kvs value: 6.3
Close off pressure with 600N motor: 600kPa
Close off pressure with 1800N motor: no
Stroke: 20mm
Media temp.: 2...170C


CLVF3W63P16

Honeywell CentraLine Valve Flanged 3-way PN16, CLVF3

For heating and air conditioning; hot/cold water quality VDI2035; greenhouses.
Valve type: 3-way mixing
Medium type: water
Materials: body cast iron GG25, trim stainless steel
Action to open: stem down
Nominal pressure: PN16
Port connection: flanges ISO7005

20 mm
DN size: 65mm
Kvs value: 63
Close off pressure with 600N motor: 160kPa
Close off pressure with 1800N motor: 650kPa
Stroke: 20mm
Media temp.: 2...170C
Flow char.: mod.equal%


CLVF3W63P6

Honeywell CentraLine Valve Flanged 3-way PN6, CLVF3

For heating and air conditioning; hot/cold water quality VDI2035; greenhouses.
Valve type: 3-way mixing
Medium type: water
Materials: body cast iron GG25, trim stainless steel
Action to open: stem down
Nominal pressure: PN6
Port connection: flanges ISO7005
Flow char.: mod.equal%

20 mm
DN size: 65mm
Kvs value: 63
Close off pressure with 600N motor: 160kPa
Close off pressure with 1800N motor: 600kPa
Stroke: 20mm
Media temp.: 2...170C


CLVT2W0.6P16

Honeywell CentraLine Valve Threaded 2-way PN16, CLVT2

For heating, ventilating and air conditioning, domestic hot water, open circuits; hot/cold water quality VDI2035.
Valve type: 2-way
Medium type: water
Materials: body brass, stem stainless steel, plug brass
Action to open: stem up
Stroke: 20mm
Media temp.: 2...170C
Nominal pressure: PN16
Port connection: ext. thread flat sealing
Flow char.: mod.equal%


DN size: 15mm
Connection diameter: G1 1/8inch
Kvs value: 0.6
Close off pressure with 600N motor: 1600kPa
Close off pressure with 1800N motor: no


CLVT2W1.0P16

Honeywell CentraLine Valve Threaded 2-way PN16, CLVT2

For heating, ventilating and air conditioning, domestic hot water, open circuits; hot/cold water quality VDI2035.
Valve type: 2-way
Medium type: water
Materials: body brass, stem stainless steel, plug brass
Action to open: stem up
Stroke: 20mm
Media temp.: 2...170C
Nominal pressure: PN16
Port connection: ext. thread flat sealing
Flow char.: mod.equal%


DN size: 15mm
Connection diameter: G1 1/8inch
Kvs value: 1
Close off pressure with 600N motor: 1600kPa
Close off pressure with 1800N motor: no


CLVT2W1.6P16

Honeywell CentraLine Valve Threaded 2-way PN16, CLVT2

For heating, ventilating and air conditioning, domestic hot water, open circuits; hot/cold water quality VDI2035.
Valve type: 2-way
Medium type: water
Materials: body brass, stem stainless steel, plug brass
Action to open: stem up
Stroke: 20mm
Media temp.: 2...170C
Nominal pressure: PN16
Port connection: ext. thread flat sealing
Flow char.: mod.equal%


DN size: 15mm
Connection diameter: G1 1/8inch
Kvs value: 1.6
Close off pressure with 600N motor: 1600kPa
Close off pressure with 1800N motor: no


CLVT2W10P16

Honeywell CentraLine Valve Threaded 2-way PN16, CLVT2

For heating, ventilating and air conditioning, domestic hot water, open circuits; hot/cold water quality VDI2035.
Valve type: 2-way
Medium type: water
Materials: body brass, stem stainless steel, plug brass
Action to open: stem up
Stroke: 20mm
Media temp.: 2...170C
Nominal pressure: PN16
Port connection: ext. thread flat sealing
Flow char.: mod.equal%


DN size: 25mm
Connection diameter: G1 1/2inch
Kvs value: 10
Close off pressure with 600N motor: 1000kPa
Close off pressure with 1800N motor: 1600kPa


CLVT2W16P16

Honeywell CentraLine Valve Threaded 2-way PN16, CLVT2

For heating, ventilating and air conditioning, domestic hot water, open circuits; hot/cold water quality VDI2035.
Valve type: 2-way
Medium type: water
Materials: body brass, stem stainless steel, plug brass
Action to open: stem up
Stroke: 20mm
Media temp.: 2...170C
Nominal pressure: PN16
Port connection: ext. thread flat sealing
Flow char.: mod.equal%


DN size: 32mm
Connection diameter: G2inch
Kvs value: 16
Close off pressure with 600N motor: 700kPa
Close off pressure with 1800N motor: 1600kPa


CLVT2W2.5P16

Honeywell CentraLine Valve Threaded 2-way PN16, CLVT2

For heating, ventilating and air conditioning, domestic hot water, open circuits; hot/cold water quality VDI2035.
Valve type: 2-way
Medium type: water
Materials: body brass, stem stainless steel, plug brass
Action to open: stem up
Stroke: 20mm
Media temp.: 2...170C
Nominal pressure: PN16
Port connection: ext. thread flat sealing
Flow char.: mod.equal%


DN size: 15mm
Connection diameter: G1 1/8inch
Kvs value: 2.5
Close off pressure with 600N motor: 1600kPa
Close off pressure with 1800N motor: no


CLVT2W25P16

Honeywell CentraLine Valve Threaded 2-way PN16, CLVT2

For heating, ventilating and air conditioning, domestic hot water, open circuits; hot/cold water quality VDI2035.
Valve type: 2-way
Medium type: water
Materials: body brass, stem stainless steel, plug brass
Action to open: stem up
Stroke: 20mm
Media temp.: 2...170C
Nominal pressure: PN16
Port connection: ext. thread flat sealing
Flow char.: mod.equal%


DN size: 40mm
Connection diameter: G2 1/4inch
Kvs value: 25
Close off pressure with 600N motor: 460kPa
Close off pressure with 1800N motor: 1500kPa


CLVT2W4.0P16

Honeywell CentraLine Valve Threaded 2-way PN16, CLVT2

For heating, ventilating and air conditioning, domestic hot water, open circuits; hot/cold water quality VDI2035.
Valve type: 2-way
Medium type: water
Materials: body brass, stem stainless steel, plug brass
Action to open: stem up
Stroke: 20mm
Media temp.: 2...170C
Nominal pressure: PN16
Port connection: ext. thread flat sealing
Flow char.: mod.equal%


DN size: 15mm
Connection diameter: G1 1/8inch
Kvs value: 4
Close off pressure with 600N motor: 1600kPa
Close off pressure with 1800N motor: no


CLVT2W40P16

Honeywell CentraLine Valve Threaded 2-way PN16, CLVT2

For heating, ventilating and air conditioning, domestic hot water, open circuits; hot/cold water quality VDI2035.
Valve type: 2-way
Medium type: water
Materials: body brass, stem stainless steel, plug brass
Action to open: stem up
Stroke: 20mm
Media temp.: 2...170C
Nominal pressure: PN16
Port connection: ext. thread flat sealing
Flow char.: mod.equal%


DN size: 50mm
Connection diameter: G2 3/4inch
Kvs value: 40
Close off pressure with 600N motor: 260kPa
Close off pressure with 1800N motor: 850kPa


CLVT2W6.3P16

Honeywell CentraLine Valve Threaded 2-way PN16, CLVT2

For heating, ventilating and air conditioning, domestic hot water, open circuits; hot/cold water quality VDI2035.
Valve type: 2-way
Medium type: water
Materials: body brass, stem stainless steel, plug brass
Action to open: stem up
Stroke: 20mm
Media temp.: 2...170C
Nominal pressure: PN16
Port connection: ext. thread flat sealing
Flow char.: mod.equal%


DN size: 20mm
Connection diameter: G1 1/4inch
Kvs value: 6.3
Close off pressure with 600N motor: 1600kPa
Close off pressure with 1800N motor: no


CLVT3W10P16

Honeywell CentraLine Valve Threaded 3-way PN16, CLVT3

For heating, ventilating and air conditioning, open circuits; hot/cold water quality VDI2035.
Valve type: 3-way mixing
Medium type: water
Materials: body brass, stem stainless steel, plug brass
Action to open: stem down
Stroke: 20mm
Media temp.: 2...170C
Nominal pressure: PN16
Port connection: ext. thread flat sealing
Flow char.: mod.equal%

20 mm
DN size: 25mm
Connection diameter: G1 1/2inch
Kvs value: 10
Close off pressure with 600N motor: 1000kPa
Close off pressure with 1800N motor: 1600kPa


CLVT3W16P16

Honeywell CentraLine Valve Threaded 3-way PN16, CLVT3

For heating, ventilating and air conditioning, open circuits; hot/cold water quality VDI2035.
Valve type: 3-way mixing
Medium type: water
Materials: body brass, stem stainless steel, plug brass
Action to open: stem down
Stroke: 20mm
Media temp.: 2...170C
Nominal pressure: PN16
Port connection: ext. thread flat sealing
Flow char.: mod.equal%

20 mm
DN size: 32mm
Connection diameter: G2inch
Kvs value: 16
Close off pressure with 600N motor: 700kPa
Close off pressure with 1800N motor: 1600kPa


CLVT3W2.5P16

Honeywell CentraLine Valve Threaded 3-way PN16, CLVT3

For heating, ventilating and air conditioning, open circuits; hot/cold water quality VDI2035.
Valve type: 3-way mixing
Medium type: water
Materials: body brass, stem stainless steel, plug brass
Action to open: stem down
Stroke: 20mm
Media temp.: 2...170C
Nominal pressure: PN16
Port connection: ext. thread flat sealing
Flow char.: mod.equal%

20 mm
DN size: 15mm
Connection diameter: G1 1/8inch
Kvs value: 2.5
Close off pressure with 600N motor: 1600kPa
Close off pressure with 1800N motor: no


CLVT3W25P16

Honeywell CentraLine Valve Threaded 3-way PN16, CLVT3

For heating, ventilating and air conditioning, open circuits; hot/cold water quality VDI2035.
Valve type: 3-way mixing
Medium type: water
Materials: body brass, stem stainless steel, plug brass
Action to open: stem down
Stroke: 20mm
Media temp.: 2...170C
Nominal pressure: PN16
Port connection: ext. thread flat sealing
Flow char.: mod.equal%

20 mm
DN size: 40mm
Connection diameter: G2 1/4inch
Kvs value: 25
Close off pressure with 600N motor: 460kPa
Close off pressure with 1800N motor: 1500kPa


CLVT3W4.0P16

Honeywell CentraLine Valve Threaded 3-way PN16, CLVT3

For heating, ventilating and air conditioning, open circuits; hot/cold water quality VDI2035.
Valve type: 3-way mixing
Medium type: water
Materials: body brass, stem stainless steel, plug brass
Action to open: stem down
Stroke: 20mm
Media temp.: 2...170C
Nominal pressure: PN16
Port connection: ext. thread flat sealing
Flow char.: mod.equal%

20 mm
DN size: 15mm
Connection diameter: G1 1/8inch
Kvs value: 4
Close off pressure with 600N motor: 1600kPa
Close off pressure with 1800N motor: no


CLVT3W40P16

Honeywell CentraLine Valve Threaded 3-way PN16, CLVT3

For heating, ventilating and air conditioning, open circuits; hot/cold water quality VDI2035.
Valve type: 3-way mixing
Medium type: water
Materials: body brass, stem stainless steel, plug brass
Action to open: stem down
Stroke: 20mm
Media temp.: 2...170C
Nominal pressure: PN16
Port connection: ext. thread flat sealing
Flow char.: mod.equal%

20 mm
DN size: 50mm
Connection diameter: G2 3/4inch
Kvs value: 40
Close off pressure with 600N motor: 260kPa
Close off pressure with 1800N motor: 850kPa


CLVT3W6.3P16

Honeywell CentraLine Valve Threaded 3-way PN16, CLVT3

For heating, ventilating and air conditioning, open circuits; hot/cold water quality VDI2035.
Valve type: 3-way mixing
Medium type: water
Materials: body brass, stem stainless steel, plug brass
Action to open: stem down
Stroke: 20mm
Media temp.: 2...170C
Nominal pressure: PN16
Port connection: ext. thread flat sealing
Flow char.: mod.equal%

20 mm
DN size: 20mm
Connection diameter: G1 1/4inch
Kvs value: 6.3
Close off pressure with 600N motor: 1600kPa
Close off pressure with 1800N motor: no


CNC2

Honeywell Trend LAN Communication Nodes Controller CNC2, INC2

The Communications Node Controller (CNC2) interfaces between a Trend Supervisor or Software Tool and the Trend network (RS232 to Lan).
The Internetwork Node Controller (INC2) allows Lans to be interconnected to create very large networks. Up to 116 INC2s can be connected to the internetwork. An INC2 may have up to 116 devices on its Lan.
The LNC2 Lancard Node Controller is a PCI bus card that interfaces between a Trend Supervisor or Software Tool and the Trend network.
Trend Node cards (CNC/INC) available in an IP30 enclosure (NBOX) or can be supplied without an enclosure for mounting inside a Trend device, e.g. an IQ controller. There are 230 V and 24 V supply versions. Boxed battery backed versions are available (230 Vac only) and an optional metal enclosure with cable glanding knockouts is also available.
Network: Trend LAN

CNC2 (Communication Node Controller)
Model: Communications Node Controller
Power: 24Vdc
Comments: no


CO2+T/D

Honeywell CO2 Sensors

The CO2 the temperature and carbon dioxide concentration in air. Duct and wall-mounting versions employ state of the art non-dispersive infra-red technology with a membrane covered sample chamber resulting in stable, reliable, and highly accurate CO2 measurements. The all-digital microprocessor based electronics facilitates easy configuration and calibration via an RS232 port connection. Programmable linear analogue outputs indicate temperature and CO2 concentration making the sensors ideal for all CO2 based ventilation control and monitoring applications.
Temperature range: -20...60C
Power supply: 24Vac
Non-dispersive infra-red (NDIR) technology
Digital electronics - intelligent sensor
Analogue outputs 10 V or 20 mA for both CO2 and temperature
RS232 port for configuration and calibration
Links configure outputs V or I, and start point (0% or 20%)
Analogue output range and scaling programmable


Mounting place: air duct
Housing (HxWxD): 140mm|83mm|45mm
Immersion depth: 220mm


CO2+T/S

Honeywell CO2 Sensors

The CO2 the temperature and carbon dioxide concentration in air. Duct and wall-mounting versions employ state of the art non-dispersive infra-red technology with a membrane covered sample chamber resulting in stable, reliable, and highly accurate CO2 measurements. The all-digital microprocessor based electronics facilitates easy configuration and calibration via an RS232 port connection. Programmable linear analogue outputs indicate temperature and CO2 concentration making the sensors ideal for all CO2 based ventilation control and monitoring applications.
Temperature range: -20...60C
Power supply: 24Vac
Non-dispersive infra-red (NDIR) technology
Digital electronics - intelligent sensor
Analogue outputs 10 V or 20 mA for both CO2 and temperature
RS232 port for configuration and calibration
Links configure outputs V or I, and start point (0% or 20%)
Analogue output range and scaling programmable


Mounting place: internal wall
Housing (HxWxD): 120mm|83mm|30mm
Immersion depth: no


CO2/RK/VT

Honeywell CO2 Sensors
Accessories

Calibration kit containing software and adapter cable



CO2/VALVE

Honeywell CO2 Sensors
Accessories

Valve for gas cylinder (includes 3mm tube)



CO2/ZERO

Honeywell CO2 Sensors
Accessories

Calibration gas (Zero ppm CO2 in 1 litre bottle)



COMP230-1P1-20

Honeywell Inverters 0,37..5,5kW, IP20, SmartDrive Compact

Variable frequency drives for induction motors, with built-in RFI filters. EMC and LVD compliant.
SmartDrive Compact is a compact size micro inverter with easy operation and commissioning. The product offers good possibilities to be used with various applications with high functionality software and 1 rating which can be used in both variable torque (HVAC applications) and constant torque (machines in industrial or process installations).
Features: Start up wizard
Integrated RFI-filters
Flexible side by side mounting with screws or DIN-rail as standard
Compact size
Single rating suitable for both pump and fan or machine applications
Maximum ambient temperature 50 oC; (40 oC for COMP230-2P2-20 and COMP400-5P5-20)
Easy to use single software package with high functionality
Parameter upload/download even without powering the inverter with COMP-LOADER accessory
Configurable Inputs and Outputs
Inputs/Outputs: 2 analog inputs (1 voltage + 1 current), 6 digital inputs, 3 digital outputs (2 relays + 1 open collector), 1 analog output (mA) and Modbus RTU
Series: SmartDrive Compact
RFI-filter: integrated
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: Modbus RTU
Immunity: fulfills all EMC immunity requirements
Emissions: EN61800-3 (category C2), C-Tick
Safety: EN61800-5, CE, UL, cUL
Protection class: IP20
http://hwll.co/inverter

208..240V, 1 phase
Voltage: 230V
Power: 1.1kW
Low overload Icont: 4.8A
High overload (for Machines): 1.1kW
High overload Icont: 4.8A
Brake chopper: no
1 phase input: yes
3 phases input: no


COMP230-1P5-20

Honeywell Inverters 0,37..5,5kW, IP20, SmartDrive Compact

Variable frequency drives for induction motors, with built-in RFI filters. EMC and LVD compliant.
SmartDrive Compact is a compact size micro inverter with easy operation and commissioning. The product offers good possibilities to be used with various applications with high functionality software and 1 rating which can be used in both variable torque (HVAC applications) and constant torque (machines in industrial or process installations).
Features: Start up wizard
Integrated RFI-filters
Flexible side by side mounting with screws or DIN-rail as standard
Compact size
Single rating suitable for both pump and fan or machine applications
Maximum ambient temperature 50 oC; (40 oC for COMP230-2P2-20 and COMP400-5P5-20)
Easy to use single software package with high functionality
Parameter upload/download even without powering the inverter with COMP-LOADER accessory
Configurable Inputs and Outputs
Inputs/Outputs: 2 analog inputs (1 voltage + 1 current), 6 digital inputs, 3 digital outputs (2 relays + 1 open collector), 1 analog output (mA) and Modbus RTU
Series: SmartDrive Compact
RFI-filter: integrated
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: Modbus RTU
Immunity: fulfills all EMC immunity requirements
Emissions: EN61800-3 (category C2), C-Tick
Safety: EN61800-5, CE, UL, cUL
Protection class: IP20
http://hwll.co/inverter

208..240V, 1 phase
Voltage: 230V
Power: 1.5kW
Low overload Icont: 7A
High overload (for Machines): 1.5kW
High overload Icont: 7A
Brake chopper: no
1 phase input: yes
3 phases input: no


COMP230-2P2-20

Honeywell Inverters 0,37..5,5kW, IP20, SmartDrive Compact

Variable frequency drives for induction motors, with built-in RFI filters. EMC and LVD compliant.
SmartDrive Compact is a compact size micro inverter with easy operation and commissioning. The product offers good possibilities to be used with various applications with high functionality software and 1 rating which can be used in both variable torque (HVAC applications) and constant torque (machines in industrial or process installations).
Features: Start up wizard
Integrated RFI-filters
Flexible side by side mounting with screws or DIN-rail as standard
Compact size
Single rating suitable for both pump and fan or machine applications
Maximum ambient temperature 50 oC; (40 oC for COMP230-2P2-20 and COMP400-5P5-20)
Easy to use single software package with high functionality
Parameter upload/download even without powering the inverter with COMP-LOADER accessory
Configurable Inputs and Outputs
Inputs/Outputs: 2 analog inputs (1 voltage + 1 current), 6 digital inputs, 3 digital outputs (2 relays + 1 open collector), 1 analog output (mA) and Modbus RTU
Series: SmartDrive Compact
RFI-filter: integrated
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: Modbus RTU
Immunity: fulfills all EMC immunity requirements
Emissions: EN61800-3 (category C2), C-Tick
Safety: EN61800-5, CE, UL, cUL
Protection class: IP20
http://hwll.co/inverter

208..240V, 1 phase
Voltage: 230V
Power: 2.2kW
Low overload Icont: 9.6A
High overload (for Machines): 2.2kW
High overload Icont: 9.6A
Brake chopper: no
1 phase input: yes
3 phases input: no


COMP230-P37-20

Honeywell Inverters 0,37..5,5kW, IP20, SmartDrive Compact

Variable frequency drives for induction motors, with built-in RFI filters. EMC and LVD compliant.
SmartDrive Compact is a compact size micro inverter with easy operation and commissioning. The product offers good possibilities to be used with various applications with high functionality software and 1 rating which can be used in both variable torque (HVAC applications) and constant torque (machines in industrial or process installations).
Features: Start up wizard
Integrated RFI-filters
Flexible side by side mounting with screws or DIN-rail as standard
Compact size
Single rating suitable for both pump and fan or machine applications
Maximum ambient temperature 50 oC; (40 oC for COMP230-2P2-20 and COMP400-5P5-20)
Easy to use single software package with high functionality
Parameter upload/download even without powering the inverter with COMP-LOADER accessory
Configurable Inputs and Outputs
Inputs/Outputs: 2 analog inputs (1 voltage + 1 current), 6 digital inputs, 3 digital outputs (2 relays + 1 open collector), 1 analog output (mA) and Modbus RTU
Series: SmartDrive Compact
RFI-filter: integrated
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: Modbus RTU
Immunity: fulfills all EMC immunity requirements
Emissions: EN61800-3 (category C2), C-Tick
Safety: EN61800-5, CE, UL, cUL
Protection class: IP20
http://hwll.co/inverter

208..240V, 1 phase
Voltage: 230V
Power: 0.37kW
Low overload Icont: 2.4A
High overload (for Machines): 0.37kW
High overload Icont: 2.4A
Brake chopper: no
1 phase input: yes
3 phases input: no


COMP230-P75-20

Honeywell Inverters 0,37..5,5kW, IP20, SmartDrive Compact

Variable frequency drives for induction motors, with built-in RFI filters. EMC and LVD compliant.
SmartDrive Compact is a compact size micro inverter with easy operation and commissioning. The product offers good possibilities to be used with various applications with high functionality software and 1 rating which can be used in both variable torque (HVAC applications) and constant torque (machines in industrial or process installations).
Features: Start up wizard
Integrated RFI-filters
Flexible side by side mounting with screws or DIN-rail as standard
Compact size
Single rating suitable for both pump and fan or machine applications
Maximum ambient temperature 50 oC; (40 oC for COMP230-2P2-20 and COMP400-5P5-20)
Easy to use single software package with high functionality
Parameter upload/download even without powering the inverter with COMP-LOADER accessory
Configurable Inputs and Outputs
Inputs/Outputs: 2 analog inputs (1 voltage + 1 current), 6 digital inputs, 3 digital outputs (2 relays + 1 open collector), 1 analog output (mA) and Modbus RTU
Series: SmartDrive Compact
RFI-filter: integrated
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: Modbus RTU
Immunity: fulfills all EMC immunity requirements
Emissions: EN61800-3 (category C2), C-Tick
Safety: EN61800-5, CE, UL, cUL
Protection class: IP20
http://hwll.co/inverter

208..240V, 1 phase
Voltage: 230V
Power: 0.75kW
Low overload Icont: 3.7A
High overload (for Machines): 0.75kW
High overload Icont: 3.7A
Brake chopper: no
1 phase input: yes
3 phases input: no


COMP400-1P1-20

Honeywell Inverters 0,37..5,5kW, IP20, SmartDrive Compact

Variable frequency drives for induction motors, with built-in RFI filters. EMC and LVD compliant.
SmartDrive Compact is a compact size micro inverter with easy operation and commissioning. The product offers good possibilities to be used with various applications with high functionality software and 1 rating which can be used in both variable torque (HVAC applications) and constant torque (machines in industrial or process installations).
Features: Start up wizard
Integrated RFI-filters
Flexible side by side mounting with screws or DIN-rail as standard
Compact size
Single rating suitable for both pump and fan or machine applications
Maximum ambient temperature 50 oC; (40 oC for COMP230-2P2-20 and COMP400-5P5-20)
Easy to use single software package with high functionality
Parameter upload/download even without powering the inverter with COMP-LOADER accessory
Configurable Inputs and Outputs
Inputs/Outputs: 2 analog inputs (1 voltage + 1 current), 6 digital inputs, 3 digital outputs (2 relays + 1 open collector), 1 analog output (mA) and Modbus RTU
Series: SmartDrive Compact
RFI-filter: integrated
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: Modbus RTU
Immunity: fulfills all EMC immunity requirements
Emissions: EN61800-3 (category C2), C-Tick
Safety: EN61800-5, CE, UL, cUL
Protection class: IP20
http://hwll.co/inverter

380..480V, 3 phases
Voltage: 400V
Power: 1.1kW
Low overload Icont: 3.3A
High overload (for Machines): 1.1kW
High overload Icont: 3.3A
Brake chopper: no
1 phase input: no
3 phases input: yes


COMP400-1P5-20

Honeywell Inverters 0,37..5,5kW, IP20, SmartDrive Compact

Variable frequency drives for induction motors, with built-in RFI filters. EMC and LVD compliant.
SmartDrive Compact is a compact size micro inverter with easy operation and commissioning. The product offers good possibilities to be used with various applications with high functionality software and 1 rating which can be used in both variable torque (HVAC applications) and constant torque (machines in industrial or process installations).
Features: Start up wizard
Integrated RFI-filters
Flexible side by side mounting with screws or DIN-rail as standard
Compact size
Single rating suitable for both pump and fan or machine applications
Maximum ambient temperature 50 oC; (40 oC for COMP230-2P2-20 and COMP400-5P5-20)
Easy to use single software package with high functionality
Parameter upload/download even without powering the inverter with COMP-LOADER accessory
Configurable Inputs and Outputs
Inputs/Outputs: 2 analog inputs (1 voltage + 1 current), 6 digital inputs, 3 digital outputs (2 relays + 1 open collector), 1 analog output (mA) and Modbus RTU
Series: SmartDrive Compact
RFI-filter: integrated
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: Modbus RTU
Immunity: fulfills all EMC immunity requirements
Emissions: EN61800-3 (category C2), C-Tick
Safety: EN61800-5, CE, UL, cUL
Protection class: IP20
http://hwll.co/inverter

380..480V, 3 phases
Voltage: 400V
Power: 1.5kW
Low overload Icont: 4.3A
High overload (for Machines): 1.5kW
High overload Icont: 4.3A
Brake chopper: integrated
1 phase input: no
3 phases input: yes


COMP400-2P2-20

Honeywell Inverters 0,37..5,5kW, IP20, SmartDrive Compact

Variable frequency drives for induction motors, with built-in RFI filters. EMC and LVD compliant.
SmartDrive Compact is a compact size micro inverter with easy operation and commissioning. The product offers good possibilities to be used with various applications with high functionality software and 1 rating which can be used in both variable torque (HVAC applications) and constant torque (machines in industrial or process installations).
Features: Start up wizard
Integrated RFI-filters
Flexible side by side mounting with screws or DIN-rail as standard
Compact size
Single rating suitable for both pump and fan or machine applications
Maximum ambient temperature 50 oC; (40 oC for COMP230-2P2-20 and COMP400-5P5-20)
Easy to use single software package with high functionality
Parameter upload/download even without powering the inverter with COMP-LOADER accessory
Configurable Inputs and Outputs
Inputs/Outputs: 2 analog inputs (1 voltage + 1 current), 6 digital inputs, 3 digital outputs (2 relays + 1 open collector), 1 analog output (mA) and Modbus RTU
Series: SmartDrive Compact
RFI-filter: integrated
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: Modbus RTU
Immunity: fulfills all EMC immunity requirements
Emissions: EN61800-3 (category C2), C-Tick
Safety: EN61800-5, CE, UL, cUL
Protection class: IP20
http://hwll.co/inverter

380..480V, 3 phases
Voltage: 400V
Power: 2.2kW
Low overload Icont: 5.6A
High overload (for Machines): 2.2kW
High overload Icont: 5.6A
Brake chopper: integrated
1 phase input: no
3 phases input: yes


COMP400-3P0-20

Honeywell Inverters 0,37..5,5kW, IP20, SmartDrive Compact

Variable frequency drives for induction motors, with built-in RFI filters. EMC and LVD compliant.
SmartDrive Compact is a compact size micro inverter with easy operation and commissioning. The product offers good possibilities to be used with various applications with high functionality software and 1 rating which can be used in both variable torque (HVAC applications) and constant torque (machines in industrial or process installations).
Features: Start up wizard
Integrated RFI-filters
Flexible side by side mounting with screws or DIN-rail as standard
Compact size
Single rating suitable for both pump and fan or machine applications
Maximum ambient temperature 50 oC; (40 oC for COMP230-2P2-20 and COMP400-5P5-20)
Easy to use single software package with high functionality
Parameter upload/download even without powering the inverter with COMP-LOADER accessory
Configurable Inputs and Outputs
Inputs/Outputs: 2 analog inputs (1 voltage + 1 current), 6 digital inputs, 3 digital outputs (2 relays + 1 open collector), 1 analog output (mA) and Modbus RTU
Series: SmartDrive Compact
RFI-filter: integrated
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: Modbus RTU
Immunity: fulfills all EMC immunity requirements
Emissions: EN61800-3 (category C2), C-Tick
Safety: EN61800-5, CE, UL, cUL
Protection class: IP20
http://hwll.co/inverter

380..480V, 3 phases
Voltage: 400V
Power: 3kW
Low overload Icont: 7.6A
High overload (for Machines): 3kW
High overload Icont: 7.6A
Brake chopper: integrated
1 phase input: no
3 phases input: yes


COMP400-4P0-20

Honeywell Inverters 0,37..5,5kW, IP20, SmartDrive Compact

Variable frequency drives for induction motors, with built-in RFI filters. EMC and LVD compliant.
SmartDrive Compact is a compact size micro inverter with easy operation and commissioning. The product offers good possibilities to be used with various applications with high functionality software and 1 rating which can be used in both variable torque (HVAC applications) and constant torque (machines in industrial or process installations).
Features: Start up wizard
Integrated RFI-filters
Flexible side by side mounting with screws or DIN-rail as standard
Compact size
Single rating suitable for both pump and fan or machine applications
Maximum ambient temperature 50 oC; (40 oC for COMP230-2P2-20 and COMP400-5P5-20)
Easy to use single software package with high functionality
Parameter upload/download even without powering the inverter with COMP-LOADER accessory
Configurable Inputs and Outputs
Inputs/Outputs: 2 analog inputs (1 voltage + 1 current), 6 digital inputs, 3 digital outputs (2 relays + 1 open collector), 1 analog output (mA) and Modbus RTU
Series: SmartDrive Compact
RFI-filter: integrated
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: Modbus RTU
Immunity: fulfills all EMC immunity requirements
Emissions: EN61800-3 (category C2), C-Tick
Safety: EN61800-5, CE, UL, cUL
Protection class: IP20
http://hwll.co/inverter

380..480V, 3 phases
Voltage: 400V
Power: 4kW
Low overload Icont: 9A
High overload (for Machines): 4kW
High overload Icont: 9A
Brake chopper: integrated
1 phase input: no
3 phases input: yes


COMP400-5P5-20

Honeywell Inverters 0,37..5,5kW, IP20, SmartDrive Compact

Variable frequency drives for induction motors, with built-in RFI filters. EMC and LVD compliant.
SmartDrive Compact is a compact size micro inverter with easy operation and commissioning. The product offers good possibilities to be used with various applications with high functionality software and 1 rating which can be used in both variable torque (HVAC applications) and constant torque (machines in industrial or process installations).
Features: Start up wizard
Integrated RFI-filters
Flexible side by side mounting with screws or DIN-rail as standard
Compact size
Single rating suitable for both pump and fan or machine applications
Maximum ambient temperature 50 oC; (40 oC for COMP230-2P2-20 and COMP400-5P5-20)
Easy to use single software package with high functionality
Parameter upload/download even without powering the inverter with COMP-LOADER accessory
Configurable Inputs and Outputs
Inputs/Outputs: 2 analog inputs (1 voltage + 1 current), 6 digital inputs, 3 digital outputs (2 relays + 1 open collector), 1 analog output (mA) and Modbus RTU
Series: SmartDrive Compact
RFI-filter: integrated
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: Modbus RTU
Immunity: fulfills all EMC immunity requirements
Emissions: EN61800-3 (category C2), C-Tick
Safety: EN61800-5, CE, UL, cUL
Protection class: IP20
http://hwll.co/inverter

380..480V, 3 phases
Voltage: 400V
Power: 5.5kW
Low overload Icont: 12A
High overload (for Machines): 5.5kW
High overload Icont: 12A
Brake chopper: integrated
1 phase input: no
3 phases input: yes


COMP400-P55-20

Honeywell Inverters 0,37..5,5kW, IP20, SmartDrive Compact

Variable frequency drives for induction motors, with built-in RFI filters. EMC and LVD compliant.
SmartDrive Compact is a compact size micro inverter with easy operation and commissioning. The product offers good possibilities to be used with various applications with high functionality software and 1 rating which can be used in both variable torque (HVAC applications) and constant torque (machines in industrial or process installations).
Features: Start up wizard
Integrated RFI-filters
Flexible side by side mounting with screws or DIN-rail as standard
Compact size
Single rating suitable for both pump and fan or machine applications
Maximum ambient temperature 50 oC; (40 oC for COMP230-2P2-20 and COMP400-5P5-20)
Easy to use single software package with high functionality
Parameter upload/download even without powering the inverter with COMP-LOADER accessory
Configurable Inputs and Outputs
Inputs/Outputs: 2 analog inputs (1 voltage + 1 current), 6 digital inputs, 3 digital outputs (2 relays + 1 open collector), 1 analog output (mA) and Modbus RTU
Series: SmartDrive Compact
RFI-filter: integrated
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: Modbus RTU
Immunity: fulfills all EMC immunity requirements
Emissions: EN61800-3 (category C2), C-Tick
Safety: EN61800-5, CE, UL, cUL
Protection class: IP20
http://hwll.co/inverter

380..480V, 3 phases
Voltage: 400V
Power: 0.55kW
Low overload Icont: 1.9A
High overload (for Machines): 0.55kW
High overload Icont: 1.9A
Brake chopper: no
1 phase input: no
3 phases input: yes


COMP400-P75-20

Honeywell Inverters 0,37..5,5kW, IP20, SmartDrive Compact

Variable frequency drives for induction motors, with built-in RFI filters. EMC and LVD compliant.
SmartDrive Compact is a compact size micro inverter with easy operation and commissioning. The product offers good possibilities to be used with various applications with high functionality software and 1 rating which can be used in both variable torque (HVAC applications) and constant torque (machines in industrial or process installations).
Features: Start up wizard
Integrated RFI-filters
Flexible side by side mounting with screws or DIN-rail as standard
Compact size
Single rating suitable for both pump and fan or machine applications
Maximum ambient temperature 50 oC; (40 oC for COMP230-2P2-20 and COMP400-5P5-20)
Easy to use single software package with high functionality
Parameter upload/download even without powering the inverter with COMP-LOADER accessory
Configurable Inputs and Outputs
Inputs/Outputs: 2 analog inputs (1 voltage + 1 current), 6 digital inputs, 3 digital outputs (2 relays + 1 open collector), 1 analog output (mA) and Modbus RTU
Series: SmartDrive Compact
RFI-filter: integrated
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: Modbus RTU
Immunity: fulfills all EMC immunity requirements
Emissions: EN61800-3 (category C2), C-Tick
Safety: EN61800-5, CE, UL, cUL
Protection class: IP20
http://hwll.co/inverter

380..480V, 3 phases
Voltage: 400V
Power: 0.75kW
Low overload Icont: 2.4A
High overload (for Machines): 0.75kW
High overload Icont: 2.4A
Brake chopper: no
1 phase input: no
3 phases input: yes


CPDU01110W

Honeywell Demo kits

Panther Demo Kits
Product description: Panther DEMO Kit 110V, SCHUKD 2 PIN plug and controller


CRE1

Honeywell Relay module for on/off control, CRE1

Signal converter module.
For a signal change from 0..10Vdc (from external controller) into on/off relay contact output.
Input signal: 0..10 Vdc (50mA)
Output signal: SPDT contact 3A/240Vac
Mounting: DIN rail


CSENSOR/100

Honeywell Current Transformers, CSENSOR

A range of current transducers for use with electricity meters.
Accuracy: Class 1
Output signal: 0 .. 0.333 Vac

CSENSOR (for use with EM-MPO/350e and EM-MPO/1400e)
Input signal: 0 .. 100 A


CSENSOR/150

Honeywell Current Transformers, CSENSOR

A range of current transducers for use with electricity meters.
Accuracy: Class 1
Output signal: 0 .. 0.333 Vac

CSENSOR (for use with EM-MPO/350e and EM-MPO/1400e)
Input signal: 0 .. 150 A


CSENSOR/400

Honeywell Current Transformers, CSENSOR

A range of current transducers for use with electricity meters.
Accuracy: Class 1
Output signal: 0 .. 0.333 Vac

CSENSOR (for use with EM-MPO/350e and EM-MPO/1400e)
Input signal: 0 .. 400 A


CSENSOR/50

Honeywell Current Transformers, CSENSOR

A range of current transducers for use with electricity meters.
Accuracy: Class 1
Output signal: 0 .. 0.333 Vac

CSENSOR (for use with EM-MPO/350e and EM-MPO/1400e)
Input signal: 0 .. 50 A


CSENSOR/800

Honeywell Current Transformers, CSENSOR

A range of current transducers for use with electricity meters.
Accuracy: Class 1
Output signal: 0 .. 0.333 Vac

CSENSOR (for use with EM-MPO/350e and EM-MPO/1400e)
Input signal: 0 .. 800 A


CXL0022V34G7I0

Honeywell Inverters 2..110 kW, IP21, CXL

Speed control for induction motors.
The Honeywell inverters are suitable for variable or constant torque applications.
To control pumps and fans for heating , ventilation and air conditioning systems, normally variable torque inverters are used
Industrial or process installations normally require constant torque inverters
The unit includes an AC choke, protecting against overvoltages, and an internal RFI filter (optional)
Power supply constant torque: 2.2...250kW
Power supply variable torque: 2.2...315kW
Power supply: 3 ph, 380/440 Volts
Input frequency: 45...66Hz
Output voltage: 0 - Uin
Continuous output current: Ict + 50 oC ambient, overload: 1,5x Ict, 1/10min. Ivt + 40 oC no overloadability
Starting torque: 200% from 0 rpm
Starting current: 2,5 Ict , max 2 s every 20 s max output frequency lower then 30 Hz and heatsink temperature lower then 60 oC
Output frequency: 0...500Hz
Frequency resolution: 0.01Hz
Serial communication: Interbus-S, Modbus, Echelon
Protection class: IP21
Immunity: the design fulfils EN 50082-1, 2
Emissions: EMC level I: EN 50081-2; EMC level C: EN 50081-1, 2
Safety: according EN 500178, CE, UL, C-UL, FI
Note: Models with different power supply, standard protections, graphic display and main brake chopper are available.


Constant torque Pct: 2.2kW
Constant torque Ict: 6.5A
Variable torque Pwt: 3kW
Variable torque Isqr: 8A
Imax: 10A
Size: M4
Dimensions device (LxWxH): 12cm|21.5cm|39cm
Weight: 8kg


CXL0030V34G7I0

Honeywell Inverters 2..110 kW, IP21, CXL

Speed control for induction motors.
The Honeywell inverters are suitable for variable or constant torque applications.
To control pumps and fans for heating , ventilation and air conditioning systems, normally variable torque inverters are used
Industrial or process installations normally require constant torque inverters
The unit includes an AC choke, protecting against overvoltages, and an internal RFI filter (optional)
Power supply constant torque: 2.2...250kW
Power supply variable torque: 2.2...315kW
Power supply: 3 ph, 380/440 Volts
Input frequency: 45...66Hz
Output voltage: 0 - Uin
Continuous output current: Ict + 50 oC ambient, overload: 1,5x Ict, 1/10min. Ivt + 40 oC no overloadability
Starting torque: 200% from 0 rpm
Starting current: 2,5 Ict , max 2 s every 20 s max output frequency lower then 30 Hz and heatsink temperature lower then 60 oC
Output frequency: 0...500Hz
Frequency resolution: 0.01Hz
Serial communication: Interbus-S, Modbus, Echelon
Protection class: IP21
Immunity: the design fulfils EN 50082-1, 2
Emissions: EMC level I: EN 50081-2; EMC level C: EN 50081-1, 2
Safety: according EN 500178, CE, UL, C-UL, FI
Note: Models with different power supply, standard protections, graphic display and main brake chopper are available.


Constant torque Pct: 3kW
Constant torque Ict: 8A
Variable torque Pwt: 4kW
Variable torque Isqr: 10A
Imax: 12A
Size: M4
Dimensions device (LxWxH): 12cm|21.5cm|39cm
Weight: 8kg


CXL0040V34G7I0

Honeywell Inverters 2..110 kW, IP21, CXL

Speed control for induction motors.
The Honeywell inverters are suitable for variable or constant torque applications.
To control pumps and fans for heating , ventilation and air conditioning systems, normally variable torque inverters are used
Industrial or process installations normally require constant torque inverters
The unit includes an AC choke, protecting against overvoltages, and an internal RFI filter (optional)
Power supply constant torque: 2.2...250kW
Power supply variable torque: 2.2...315kW
Power supply: 3 ph, 380/440 Volts
Input frequency: 45...66Hz
Output voltage: 0 - Uin
Continuous output current: Ict + 50 oC ambient, overload: 1,5x Ict, 1/10min. Ivt + 40 oC no overloadability
Starting torque: 200% from 0 rpm
Starting current: 2,5 Ict , max 2 s every 20 s max output frequency lower then 30 Hz and heatsink temperature lower then 60 oC
Output frequency: 0...500Hz
Frequency resolution: 0.01Hz
Serial communication: Interbus-S, Modbus, Echelon
Protection class: IP21
Immunity: the design fulfils EN 50082-1, 2
Emissions: EMC level I: EN 50081-2; EMC level C: EN 50081-1, 2
Safety: according EN 500178, CE, UL, C-UL, FI
Note: Models with different power supply, standard protections, graphic display and main brake chopper are available.


Constant torque Pct: 4kW
Constant torque Ict: 10A
Variable torque Pwt: 5.5kW
Variable torque Isqr: 13A
Imax: 15A
Size: M4
Dimensions device (LxWxH): 12cm|21.5cm|39cm
Weight: 8kg


CXL0055V34G7I0

Honeywell Inverters 2..110 kW, IP21, CXL

Speed control for induction motors.
The Honeywell inverters are suitable for variable or constant torque applications.
To control pumps and fans for heating , ventilation and air conditioning systems, normally variable torque inverters are used
Industrial or process installations normally require constant torque inverters
The unit includes an AC choke, protecting against overvoltages, and an internal RFI filter (optional)
Power supply constant torque: 2.2...250kW
Power supply variable torque: 2.2...315kW
Power supply: 3 ph, 380/440 Volts
Input frequency: 45...66Hz
Output voltage: 0 - Uin
Continuous output current: Ict + 50 oC ambient, overload: 1,5x Ict, 1/10min. Ivt + 40 oC no overloadability
Starting torque: 200% from 0 rpm
Starting current: 2,5 Ict , max 2 s every 20 s max output frequency lower then 30 Hz and heatsink temperature lower then 60 oC
Output frequency: 0...500Hz
Frequency resolution: 0.01Hz
Serial communication: Interbus-S, Modbus, Echelon
Protection class: IP21
Immunity: the design fulfils EN 50082-1, 2
Emissions: EMC level I: EN 50081-2; EMC level C: EN 50081-1, 2
Safety: according EN 500178, CE, UL, C-UL, FI
Note: Models with different power supply, standard protections, graphic display and main brake chopper are available.


Constant torque Pct: 5.5kW
Constant torque Ict: 13A
Variable torque Pwt: 7.5kW
Variable torque Isqr: 18A
Imax: 20A
Size: M4
Dimensions device (LxWxH): 12cm|21.5cm|39cm
Weight: 8kg


CXL0075V34G7I0

Honeywell Inverters 2..110 kW, IP21, CXL

Speed control for induction motors.
The Honeywell inverters are suitable for variable or constant torque applications.
To control pumps and fans for heating , ventilation and air conditioning systems, normally variable torque inverters are used
Industrial or process installations normally require constant torque inverters
The unit includes an AC choke, protecting against overvoltages, and an internal RFI filter (optional)
Power supply constant torque: 2.2...250kW
Power supply variable torque: 2.2...315kW
Power supply: 3 ph, 380/440 Volts
Input frequency: 45...66Hz
Output voltage: 0 - Uin
Continuous output current: Ict + 50 oC ambient, overload: 1,5x Ict, 1/10min. Ivt + 40 oC no overloadability
Starting torque: 200% from 0 rpm
Starting current: 2,5 Ict , max 2 s every 20 s max output frequency lower then 30 Hz and heatsink temperature lower then 60 oC
Output frequency: 0...500Hz
Frequency resolution: 0.01Hz
Serial communication: Interbus-S, Modbus, Echelon
Protection class: IP21
Immunity: the design fulfils EN 50082-1, 2
Emissions: EMC level I: EN 50081-2; EMC level C: EN 50081-1, 2
Safety: according EN 500178, CE, UL, C-UL, FI
Note: Models with different power supply, standard protections, graphic display and main brake chopper are available.


Constant torque Pct: 7.5kW
Constant torque Ict: 18A
Variable torque Pwt: 11kW
Variable torque Isqr: 24A
Imax: 27A
Size: M5
Dimensions device (LxWxH): 15.7cm|23.8cm|51.5cm
Weight: 16kg


CXL0110V34G7I0

Honeywell Inverters 2..110 kW, IP21, CXL

Speed control for induction motors.
The Honeywell inverters are suitable for variable or constant torque applications.
To control pumps and fans for heating , ventilation and air conditioning systems, normally variable torque inverters are used
Industrial or process installations normally require constant torque inverters
The unit includes an AC choke, protecting against overvoltages, and an internal RFI filter (optional)
Power supply constant torque: 2.2...250kW
Power supply variable torque: 2.2...315kW
Power supply: 3 ph, 380/440 Volts
Input frequency: 45...66Hz
Output voltage: 0 - Uin
Continuous output current: Ict + 50 oC ambient, overload: 1,5x Ict, 1/10min. Ivt + 40 oC no overloadability
Starting torque: 200% from 0 rpm
Starting current: 2,5 Ict , max 2 s every 20 s max output frequency lower then 30 Hz and heatsink temperature lower then 60 oC
Output frequency: 0...500Hz
Frequency resolution: 0.01Hz
Serial communication: Interbus-S, Modbus, Echelon
Protection class: IP21
Immunity: the design fulfils EN 50082-1, 2
Emissions: EMC level I: EN 50081-2; EMC level C: EN 50081-1, 2
Safety: according EN 500178, CE, UL, C-UL, FI
Note: Models with different power supply, standard protections, graphic display and main brake chopper are available.


Constant torque Pct: 11kW
Constant torque Ict: 24A
Variable torque Pwt: 15kW
Variable torque Isqr: 32A
Imax: 36A
Size: M5
Dimensions device (LxWxH): 15.7cm|23.8cm|51.5cm
Weight: 16kg


CXL0150V34G7I0

Honeywell Inverters 2..110 kW, IP21, CXL

Speed control for induction motors.
The Honeywell inverters are suitable for variable or constant torque applications.
To control pumps and fans for heating , ventilation and air conditioning systems, normally variable torque inverters are used
Industrial or process installations normally require constant torque inverters
The unit includes an AC choke, protecting against overvoltages, and an internal RFI filter (optional)
Power supply constant torque: 2.2...250kW
Power supply variable torque: 2.2...315kW
Power supply: 3 ph, 380/440 Volts
Input frequency: 45...66Hz
Output voltage: 0 - Uin
Continuous output current: Ict + 50 oC ambient, overload: 1,5x Ict, 1/10min. Ivt + 40 oC no overloadability
Starting torque: 200% from 0 rpm
Starting current: 2,5 Ict , max 2 s every 20 s max output frequency lower then 30 Hz and heatsink temperature lower then 60 oC
Output frequency: 0...500Hz
Frequency resolution: 0.01Hz
Serial communication: Interbus-S, Modbus, Echelon
Protection class: IP21
Immunity: the design fulfils EN 50082-1, 2
Emissions: EMC level I: EN 50081-2; EMC level C: EN 50081-1, 2
Safety: according EN 500178, CE, UL, C-UL, FI
Note: Models with different power supply, standard protections, graphic display and main brake chopper are available.


Constant torque Pct: 15kW
Constant torque Ict: 32A
Variable torque Pwt: 18.5kW
Variable torque Isqr: 42A
Imax: 48A
Size: M5
Dimensions device (LxWxH): 15.7cm|23.8cm|51.5cm
Weight: 16kg


CXL0185V34G7I0

Honeywell Inverters 2..110 kW, IP21, CXL

Speed control for induction motors.
The Honeywell inverters are suitable for variable or constant torque applications.
To control pumps and fans for heating , ventilation and air conditioning systems, normally variable torque inverters are used
Industrial or process installations normally require constant torque inverters
The unit includes an AC choke, protecting against overvoltages, and an internal RFI filter (optional)
Power supply constant torque: 2.2...250kW
Power supply variable torque: 2.2...315kW
Power supply: 3 ph, 380/440 Volts
Input frequency: 45...66Hz
Output voltage: 0 - Uin
Continuous output current: Ict + 50 oC ambient, overload: 1,5x Ict, 1/10min. Ivt + 40 oC no overloadability
Starting torque: 200% from 0 rpm
Starting current: 2,5 Ict , max 2 s every 20 s max output frequency lower then 30 Hz and heatsink temperature lower then 60 oC
Output frequency: 0...500Hz
Frequency resolution: 0.01Hz
Serial communication: Interbus-S, Modbus, Echelon
Protection class: IP21
Immunity: the design fulfils EN 50082-1, 2
Emissions: EMC level I: EN 50081-2; EMC level C: EN 50081-1, 2
Safety: according EN 500178, CE, UL, C-UL, FI
Note: Models with different power supply, standard protections, graphic display and main brake chopper are available.


Constant torque Pct: 18.5kW
Constant torque Ict: 42A
Variable torque Pwt: 22kW
Variable torque Isqr: 48A
Imax: 63.0A
Size: M6
Dimensions device (LxWxH): 22cm|29cm|65cm
Weight: 38kg


CXL0220V34G7I0

Honeywell Inverters 2..110 kW, IP21, CXL

Speed control for induction motors.
The Honeywell inverters are suitable for variable or constant torque applications.
To control pumps and fans for heating , ventilation and air conditioning systems, normally variable torque inverters are used
Industrial or process installations normally require constant torque inverters
The unit includes an AC choke, protecting against overvoltages, and an internal RFI filter (optional)
Power supply constant torque: 2.2...250kW
Power supply variable torque: 2.2...315kW
Power supply: 3 ph, 380/440 Volts
Input frequency: 45...66Hz
Output voltage: 0 - Uin
Continuous output current: Ict + 50 oC ambient, overload: 1,5x Ict, 1/10min. Ivt + 40 oC no overloadability
Starting torque: 200% from 0 rpm
Starting current: 2,5 Ict , max 2 s every 20 s max output frequency lower then 30 Hz and heatsink temperature lower then 60 oC
Output frequency: 0...500Hz
Frequency resolution: 0.01Hz
Serial communication: Interbus-S, Modbus, Echelon
Protection class: IP21
Immunity: the design fulfils EN 50082-1, 2
Emissions: EMC level I: EN 50081-2; EMC level C: EN 50081-1, 2
Safety: according EN 500178, CE, UL, C-UL, FI
Note: Models with different power supply, standard protections, graphic display and main brake chopper are available.


Constant torque Pct: 22kW
Constant torque Ict: 48A
Variable torque Pwt: 30kW
Variable torque Isqr: 60A
Imax: 72A
Size: M6
Dimensions device (LxWxH): 22cm|29cm|65cm
Weight: 38kg


CXL0300V34G7I0

Honeywell Inverters 2..110 kW, IP21, CXL

Speed control for induction motors.
The Honeywell inverters are suitable for variable or constant torque applications.
To control pumps and fans for heating , ventilation and air conditioning systems, normally variable torque inverters are used
Industrial or process installations normally require constant torque inverters
The unit includes an AC choke, protecting against overvoltages, and an internal RFI filter (optional)
Power supply constant torque: 2.2...250kW
Power supply variable torque: 2.2...315kW
Power supply: 3 ph, 380/440 Volts
Input frequency: 45...66Hz
Output voltage: 0 - Uin
Continuous output current: Ict + 50 oC ambient, overload: 1,5x Ict, 1/10min. Ivt + 40 oC no overloadability
Starting torque: 200% from 0 rpm
Starting current: 2,5 Ict , max 2 s every 20 s max output frequency lower then 30 Hz and heatsink temperature lower then 60 oC
Output frequency: 0...500Hz
Frequency resolution: 0.01Hz
Serial communication: Interbus-S, Modbus, Echelon
Protection class: IP21
Immunity: the design fulfils EN 50082-1, 2
Emissions: EMC level I: EN 50081-2; EMC level C: EN 50081-1, 2
Safety: according EN 500178, CE, UL, C-UL, FI
Note: Models with different power supply, standard protections, graphic display and main brake chopper are available.


Constant torque Pct: 30kW
Constant torque Ict: 60A
Variable torque Pwt: 37kW
Variable torque Isqr: 75A
Imax: 90A
Size: M6
Dimensions device (LxWxH): 22cm|29cm|65cm
Weight: 38kg


CXL0370V34G7I0

Honeywell Inverters 2..110 kW, IP21, CXL

Speed control for induction motors.
The Honeywell inverters are suitable for variable or constant torque applications.
To control pumps and fans for heating , ventilation and air conditioning systems, normally variable torque inverters are used
Industrial or process installations normally require constant torque inverters
The unit includes an AC choke, protecting against overvoltages, and an internal RFI filter (optional)
Power supply constant torque: 2.2...250kW
Power supply variable torque: 2.2...315kW
Power supply: 3 ph, 380/440 Volts
Input frequency: 45...66Hz
Output voltage: 0 - Uin
Continuous output current: Ict + 50 oC ambient, overload: 1,5x Ict, 1/10min. Ivt + 40 oC no overloadability
Starting torque: 200% from 0 rpm
Starting current: 2,5 Ict , max 2 s every 20 s max output frequency lower then 30 Hz and heatsink temperature lower then 60 oC
Output frequency: 0...500Hz
Frequency resolution: 0.01Hz
Serial communication: Interbus-S, Modbus, Echelon
Protection class: IP21
Immunity: the design fulfils EN 50082-1, 2
Emissions: EMC level I: EN 50081-2; EMC level C: EN 50081-1, 2
Safety: according EN 500178, CE, UL, C-UL, FI
Note: Models with different power supply, standard protections, graphic display and main brake chopper are available.


Constant torque Pct: 37kW
Constant torque Ict: 75A
Variable torque Pwt: 45kW
Variable torque Isqr: 90A
Imax: 113A
Size: M6
Dimensions device (LxWxH): 22cm|29cm|65cm
Weight: 38kg


CXL0450V34G7I0

Honeywell Inverters 2..110 kW, IP21, CXL

Speed control for induction motors.
The Honeywell inverters are suitable for variable or constant torque applications.
To control pumps and fans for heating , ventilation and air conditioning systems, normally variable torque inverters are used
Industrial or process installations normally require constant torque inverters
The unit includes an AC choke, protecting against overvoltages, and an internal RFI filter (optional)
Power supply constant torque: 2.2...250kW
Power supply variable torque: 2.2...315kW
Power supply: 3 ph, 380/440 Volts
Input frequency: 45...66Hz
Output voltage: 0 - Uin
Continuous output current: Ict + 50 oC ambient, overload: 1,5x Ict, 1/10min. Ivt + 40 oC no overloadability
Starting torque: 200% from 0 rpm
Starting current: 2,5 Ict , max 2 s every 20 s max output frequency lower then 30 Hz and heatsink temperature lower then 60 oC
Output frequency: 0...500Hz
Frequency resolution: 0.01Hz
Serial communication: Interbus-S, Modbus, Echelon
Protection class: IP21
Immunity: the design fulfils EN 50082-1, 2
Emissions: EMC level I: EN 50081-2; EMC level C: EN 50081-1, 2
Safety: according EN 500178, CE, UL, C-UL, FI
Note: Models with different power supply, standard protections, graphic display and main brake chopper are available.


Constant torque Pct: 45kW
Constant torque Ict: 90A
Variable torque Pwt: 55kW
Variable torque Isqr: 110A
Imax: 135A
Size: M6
Dimensions device (LxWxH): 22cm|29cm|65cm
Weight: 38kg


CXL0550V34G7I0

Honeywell Inverters 2..110 kW, IP21, CXL

Speed control for induction motors.
The Honeywell inverters are suitable for variable or constant torque applications.
To control pumps and fans for heating , ventilation and air conditioning systems, normally variable torque inverters are used
Industrial or process installations normally require constant torque inverters
The unit includes an AC choke, protecting against overvoltages, and an internal RFI filter (optional)
Power supply constant torque: 2.2...250kW
Power supply variable torque: 2.2...315kW
Power supply: 3 ph, 380/440 Volts
Input frequency: 45...66Hz
Output voltage: 0 - Uin
Continuous output current: Ict + 50 oC ambient, overload: 1,5x Ict, 1/10min. Ivt + 40 oC no overloadability
Starting torque: 200% from 0 rpm
Starting current: 2,5 Ict , max 2 s every 20 s max output frequency lower then 30 Hz and heatsink temperature lower then 60 oC
Output frequency: 0...500Hz
Frequency resolution: 0.01Hz
Serial communication: Interbus-S, Modbus, Echelon
Protection class: IP21
Immunity: the design fulfils EN 50082-1, 2
Emissions: EMC level I: EN 50081-2; EMC level C: EN 50081-1, 2
Safety: according EN 500178, CE, UL, C-UL, FI
Note: Models with different power supply, standard protections, graphic display and main brake chopper are available.


Constant torque Pct: 55kW
Constant torque Ict: 110A
Variable torque Pwt: 75kW
Variable torque Isqr: 150A
Imax: 165A
Size: M7
Dimensions device (LxWxH): 37.4cm|33cm|100cm
Weight: 100kg


CXL0750V34G7I0

Honeywell Inverters 2..110 kW, IP21, CXL

Speed control for induction motors.
The Honeywell inverters are suitable for variable or constant torque applications.
To control pumps and fans for heating , ventilation and air conditioning systems, normally variable torque inverters are used
Industrial or process installations normally require constant torque inverters
The unit includes an AC choke, protecting against overvoltages, and an internal RFI filter (optional)
Power supply constant torque: 2.2...250kW
Power supply variable torque: 2.2...315kW
Power supply: 3 ph, 380/440 Volts
Input frequency: 45...66Hz
Output voltage: 0 - Uin
Continuous output current: Ict + 50 oC ambient, overload: 1,5x Ict, 1/10min. Ivt + 40 oC no overloadability
Starting torque: 200% from 0 rpm
Starting current: 2,5 Ict , max 2 s every 20 s max output frequency lower then 30 Hz and heatsink temperature lower then 60 oC
Output frequency: 0...500Hz
Frequency resolution: 0.01Hz
Serial communication: Interbus-S, Modbus, Echelon
Protection class: IP21
Immunity: the design fulfils EN 50082-1, 2
Emissions: EMC level I: EN 50081-2; EMC level C: EN 50081-1, 2
Safety: according EN 500178, CE, UL, C-UL, FI
Note: Models with different power supply, standard protections, graphic display and main brake chopper are available.


Constant torque Pct: 75kW
Constant torque Ict: 150A
Variable torque Pwt: 90kW
Variable torque Isqr: 180A
Imax: 225A
Size: M7
Dimensions device (LxWxH): 37.4cm|33cm|100cm
Weight: 100kg


CXL0900V34G7I0

Honeywell Inverters 2..110 kW, IP21, CXL

Speed control for induction motors.
The Honeywell inverters are suitable for variable or constant torque applications.
To control pumps and fans for heating , ventilation and air conditioning systems, normally variable torque inverters are used
Industrial or process installations normally require constant torque inverters
The unit includes an AC choke, protecting against overvoltages, and an internal RFI filter (optional)
Power supply constant torque: 2.2...250kW
Power supply variable torque: 2.2...315kW
Power supply: 3 ph, 380/440 Volts
Input frequency: 45...66Hz
Output voltage: 0 - Uin
Continuous output current: Ict + 50 oC ambient, overload: 1,5x Ict, 1/10min. Ivt + 40 oC no overloadability
Starting torque: 200% from 0 rpm
Starting current: 2,5 Ict , max 2 s every 20 s max output frequency lower then 30 Hz and heatsink temperature lower then 60 oC
Output frequency: 0...500Hz
Frequency resolution: 0.01Hz
Serial communication: Interbus-S, Modbus, Echelon
Protection class: IP21
Immunity: the design fulfils EN 50082-1, 2
Emissions: EMC level I: EN 50081-2; EMC level C: EN 50081-1, 2
Safety: according EN 500178, CE, UL, C-UL, FI
Note: Models with different power supply, standard protections, graphic display and main brake chopper are available.


Constant torque Pct: 90kW
Constant torque Ict: 180A
Variable torque Pwt: 110kW
Variable torque Isqr: 210A
Imax: 250.0A
Size: M7
Dimensions device (LxWxH): 37.4cm|33cm|100cm
Weight: 100kg


CXS0007V34G2C1

Honeywell Inverters 0,5..30kW, IP20, CXS

Speed control for induction motors.
The Honeywell inverters are suitable for variable or constant torque applications.
To control pumps and fans for heating , ventilation and air conditioning systems, normally variable torque inverters are used
Industrial or process installations normally require constant torque inverters
The unit includes an AC choke, protecting against overvoltages, and an internal RFI filter (optional)
Power supply constant torque: 0.5...22kW
Power supply variable torque: 0.55...30kW
Power supply: 3 ph, 380/440 Volts
Input frequency: 45...66Hz
Output voltage: 0 - Uin
Continuous output current: Ict + 50 oC ambient, overload: 1,5x Ict, 1/10min. Ivt + 40 oC no overloadability
Starting torque: 200% from 0 rpm
Starting current: 2,5 Ict , max 2 s every 20 s max output frequency lower then 30 Hz and heatsink temperature lower then 60 oC
Output frequency: 0...500Hz
Frequency resolution: 0.01Hz
Serial communication: Interbus-S, Modbus, Echelon
Protection class: IP20
Immunity: the design fulfils EN 50082-1, 2
Emissions: EMC level I: EN 50081-2; EMC level C: EN 50081-1, 2
Safety: according EN 500178, CE, UL, C-UL, FI
Note: Models with different power supply, standard protections, graphic display and main brake chopper are available.


Constant torque Pct: 0.75kW
Constant torque Ict: 2.5A
Variable torque Pwt: 1.1kW
Variable torque Isqr: 3.5A
Imax: 3.8A
Size: M3
Dimensions device (LxWxH): 12cm|15cm|30.5cm
Weight: 4.5kg


CXS0011V34G2C1

Honeywell Inverters 0,5..30kW, IP20, CXS

Speed control for induction motors.
The Honeywell inverters are suitable for variable or constant torque applications.
To control pumps and fans for heating , ventilation and air conditioning systems, normally variable torque inverters are used
Industrial or process installations normally require constant torque inverters
The unit includes an AC choke, protecting against overvoltages, and an internal RFI filter (optional)
Power supply constant torque: 0.5...22kW
Power supply variable torque: 0.55...30kW
Power supply: 3 ph, 380/440 Volts
Input frequency: 45...66Hz
Output voltage: 0 - Uin
Continuous output current: Ict + 50 oC ambient, overload: 1,5x Ict, 1/10min. Ivt + 40 oC no overloadability
Starting torque: 200% from 0 rpm
Starting current: 2,5 Ict , max 2 s every 20 s max output frequency lower then 30 Hz and heatsink temperature lower then 60 oC
Output frequency: 0...500Hz
Frequency resolution: 0.01Hz
Serial communication: Interbus-S, Modbus, Echelon
Protection class: IP20
Immunity: the design fulfils EN 50082-1, 2
Emissions: EMC level I: EN 50081-2; EMC level C: EN 50081-1, 2
Safety: according EN 500178, CE, UL, C-UL, FI
Note: Models with different power supply, standard protections, graphic display and main brake chopper are available.


Constant torque Pct: 1.1kW
Constant torque Ict: 3.5A
Variable torque Pwt: 1.5kW
Variable torque Isqr: 4.5A
Imax: 5.3A
Size: M3
Dimensions device (LxWxH): 12cm|15cm|30.5cm
Weight: 4.5kg


CXS0015V34G2C1

Honeywell Inverters 0,5..30kW, IP20, CXS

Speed control for induction motors.
The Honeywell inverters are suitable for variable or constant torque applications.
To control pumps and fans for heating , ventilation and air conditioning systems, normally variable torque inverters are used
Industrial or process installations normally require constant torque inverters
The unit includes an AC choke, protecting against overvoltages, and an internal RFI filter (optional)
Power supply constant torque: 0.5...22kW
Power supply variable torque: 0.55...30kW
Power supply: 3 ph, 380/440 Volts
Input frequency: 45...66Hz
Output voltage: 0 - Uin
Continuous output current: Ict + 50 oC ambient, overload: 1,5x Ict, 1/10min. Ivt + 40 oC no overloadability
Starting torque: 200% from 0 rpm
Starting current: 2,5 Ict , max 2 s every 20 s max output frequency lower then 30 Hz and heatsink temperature lower then 60 oC
Output frequency: 0...500Hz
Frequency resolution: 0.01Hz
Serial communication: Interbus-S, Modbus, Echelon
Protection class: IP20
Immunity: the design fulfils EN 50082-1, 2
Emissions: EMC level I: EN 50081-2; EMC level C: EN 50081-1, 2
Safety: according EN 500178, CE, UL, C-UL, FI
Note: Models with different power supply, standard protections, graphic display and main brake chopper are available.


Constant torque Pct: 1.5kW
Constant torque Ict: 4.5A
Variable torque Pwt: 2.2kW
Variable torque Isqr: 6.5A
Imax: 6.8A
Size: M3
Dimensions device (LxWxH): 12cm|15cm|30.5cm
Weight: 4.5kg


CXS0022V34G2C1

Honeywell Inverters 0,5..30kW, IP20, CXS

Speed control for induction motors.
The Honeywell inverters are suitable for variable or constant torque applications.
To control pumps and fans for heating , ventilation and air conditioning systems, normally variable torque inverters are used
Industrial or process installations normally require constant torque inverters
The unit includes an AC choke, protecting against overvoltages, and an internal RFI filter (optional)
Power supply constant torque: 0.5...22kW
Power supply variable torque: 0.55...30kW
Power supply: 3 ph, 380/440 Volts
Input frequency: 45...66Hz
Output voltage: 0 - Uin
Continuous output current: Ict + 50 oC ambient, overload: 1,5x Ict, 1/10min. Ivt + 40 oC no overloadability
Starting torque: 200% from 0 rpm
Starting current: 2,5 Ict , max 2 s every 20 s max output frequency lower then 30 Hz and heatsink temperature lower then 60 oC
Output frequency: 0...500Hz
Frequency resolution: 0.01Hz
Serial communication: Interbus-S, Modbus, Echelon
Protection class: IP20
Immunity: the design fulfils EN 50082-1, 2
Emissions: EMC level I: EN 50081-2; EMC level C: EN 50081-1, 2
Safety: according EN 500178, CE, UL, C-UL, FI
Note: Models with different power supply, standard protections, graphic display and main brake chopper are available.


Constant torque Pct: 2.2kW
Constant torque Ict: 6.5A
Variable torque Pwt: 3kW
Variable torque Isqr: 8A
Imax: 10A
Size: M3
Dimensions device (LxWxH): 12cm|15cm|30.5cm
Weight: 4.5kg


CXS0030V34G2C1

Honeywell Inverters 0,5..30kW, IP20, CXS

Speed control for induction motors.
The Honeywell inverters are suitable for variable or constant torque applications.
To control pumps and fans for heating , ventilation and air conditioning systems, normally variable torque inverters are used
Industrial or process installations normally require constant torque inverters
The unit includes an AC choke, protecting against overvoltages, and an internal RFI filter (optional)
Power supply constant torque: 0.5...22kW
Power supply variable torque: 0.55...30kW
Power supply: 3 ph, 380/440 Volts
Input frequency: 45...66Hz
Output voltage: 0 - Uin
Continuous output current: Ict + 50 oC ambient, overload: 1,5x Ict, 1/10min. Ivt + 40 oC no overloadability
Starting torque: 200% from 0 rpm
Starting current: 2,5 Ict , max 2 s every 20 s max output frequency lower then 30 Hz and heatsink temperature lower then 60 oC
Output frequency: 0...500Hz
Frequency resolution: 0.01Hz
Serial communication: Interbus-S, Modbus, Echelon
Protection class: IP20
Immunity: the design fulfils EN 50082-1, 2
Emissions: EMC level I: EN 50081-2; EMC level C: EN 50081-1, 2
Safety: according EN 500178, CE, UL, C-UL, FI
Note: Models with different power supply, standard protections, graphic display and main brake chopper are available.


Constant torque Pct: 3kW
Constant torque Ict: 8A
Variable torque Pwt: 4kW
Variable torque Isqr: 10A
Imax: 12A
Size: M3
Dimensions device (LxWxH): 12cm|15cm|30.5cm
Weight: 4.5kg


CXS0040V34G2C1

Honeywell Inverters 0,5..30kW, IP20, CXS

Speed control for induction motors.
The Honeywell inverters are suitable for variable or constant torque applications.
To control pumps and fans for heating , ventilation and air conditioning systems, normally variable torque inverters are used
Industrial or process installations normally require constant torque inverters
The unit includes an AC choke, protecting against overvoltages, and an internal RFI filter (optional)
Power supply constant torque: 0.5...22kW
Power supply variable torque: 0.55...30kW
Power supply: 3 ph, 380/440 Volts
Input frequency: 45...66Hz
Output voltage: 0 - Uin
Continuous output current: Ict + 50 oC ambient, overload: 1,5x Ict, 1/10min. Ivt + 40 oC no overloadability
Starting torque: 200% from 0 rpm
Starting current: 2,5 Ict , max 2 s every 20 s max output frequency lower then 30 Hz and heatsink temperature lower then 60 oC
Output frequency: 0...500Hz
Frequency resolution: 0.01Hz
Serial communication: Interbus-S, Modbus, Echelon
Protection class: IP20
Immunity: the design fulfils EN 50082-1, 2
Emissions: EMC level I: EN 50081-2; EMC level C: EN 50081-1, 2
Safety: according EN 500178, CE, UL, C-UL, FI
Note: Models with different power supply, standard protections, graphic display and main brake chopper are available.


Constant torque Pct: 4kW
Constant torque Ict: 10A
Variable torque Pwt: 5.5kW
Variable torque Isqr: 13A
Imax: 15A
Size: M4
Dimensions device (LxWxH): 13.5cm|20.5cm|39cm
Weight: 7kg


CXS0055V34G2C1

Honeywell Inverters 0,5..30kW, IP20, CXS

Speed control for induction motors.
The Honeywell inverters are suitable for variable or constant torque applications.
To control pumps and fans for heating , ventilation and air conditioning systems, normally variable torque inverters are used
Industrial or process installations normally require constant torque inverters
The unit includes an AC choke, protecting against overvoltages, and an internal RFI filter (optional)
Power supply constant torque: 0.5...22kW
Power supply variable torque: 0.55...30kW
Power supply: 3 ph, 380/440 Volts
Input frequency: 45...66Hz
Output voltage: 0 - Uin
Continuous output current: Ict + 50 oC ambient, overload: 1,5x Ict, 1/10min. Ivt + 40 oC no overloadability
Starting torque: 200% from 0 rpm
Starting current: 2,5 Ict , max 2 s every 20 s max output frequency lower then 30 Hz and heatsink temperature lower then 60 oC
Output frequency: 0...500Hz
Frequency resolution: 0.01Hz
Serial communication: Interbus-S, Modbus, Echelon
Protection class: IP20
Immunity: the design fulfils EN 50082-1, 2
Emissions: EMC level I: EN 50081-2; EMC level C: EN 50081-1, 2
Safety: according EN 500178, CE, UL, C-UL, FI
Note: Models with different power supply, standard protections, graphic display and main brake chopper are available.


Constant torque Pct: 5.5kW
Constant torque Ict: 13A
Variable torque Pwt: 7.5kW
Variable torque Isqr: 18A
Imax: 20A
Size: M4
Dimensions device (LxWxH): 13.5cm|20.5cm|39cm
Weight: 7kg


CXS0075V34G2C1

Honeywell Inverters 0,5..30kW, IP20, CXS

Speed control for induction motors.
The Honeywell inverters are suitable for variable or constant torque applications.
To control pumps and fans for heating , ventilation and air conditioning systems, normally variable torque inverters are used
Industrial or process installations normally require constant torque inverters
The unit includes an AC choke, protecting against overvoltages, and an internal RFI filter (optional)
Power supply constant torque: 0.5...22kW
Power supply variable torque: 0.55...30kW
Power supply: 3 ph, 380/440 Volts
Input frequency: 45...66Hz
Output voltage: 0 - Uin
Continuous output current: Ict + 50 oC ambient, overload: 1,5x Ict, 1/10min. Ivt + 40 oC no overloadability
Starting torque: 200% from 0 rpm
Starting current: 2,5 Ict , max 2 s every 20 s max output frequency lower then 30 Hz and heatsink temperature lower then 60 oC
Output frequency: 0...500Hz
Frequency resolution: 0.01Hz
Serial communication: Interbus-S, Modbus, Echelon
Protection class: IP20
Immunity: the design fulfils EN 50082-1, 2
Emissions: EMC level I: EN 50081-2; EMC level C: EN 50081-1, 2
Safety: according EN 500178, CE, UL, C-UL, FI
Note: Models with different power supply, standard protections, graphic display and main brake chopper are available.


Constant torque Pct: 7.5kW
Constant torque Ict: 18A
Variable torque Pwt: 11kW
Variable torque Isqr: 24A
Imax: 27A
Size: M4
Dimensions device (LxWxH): 13.5cm|20.5cm|39cm
Weight: 7kg


CXS0110V34G2C1

Honeywell Inverters 0,5..30kW, IP20, CXS

Speed control for induction motors.
The Honeywell inverters are suitable for variable or constant torque applications.
To control pumps and fans for heating , ventilation and air conditioning systems, normally variable torque inverters are used
Industrial or process installations normally require constant torque inverters
The unit includes an AC choke, protecting against overvoltages, and an internal RFI filter (optional)
Power supply constant torque: 0.5...22kW
Power supply variable torque: 0.55...30kW
Power supply: 3 ph, 380/440 Volts
Input frequency: 45...66Hz
Output voltage: 0 - Uin
Continuous output current: Ict + 50 oC ambient, overload: 1,5x Ict, 1/10min. Ivt + 40 oC no overloadability
Starting torque: 200% from 0 rpm
Starting current: 2,5 Ict , max 2 s every 20 s max output frequency lower then 30 Hz and heatsink temperature lower then 60 oC
Output frequency: 0...500Hz
Frequency resolution: 0.01Hz
Serial communication: Interbus-S, Modbus, Echelon
Protection class: IP20
Immunity: the design fulfils EN 50082-1, 2
Emissions: EMC level I: EN 50081-2; EMC level C: EN 50081-1, 2
Safety: according EN 500178, CE, UL, C-UL, FI
Note: Models with different power supply, standard protections, graphic display and main brake chopper are available.


Constant torque Pct: 11kW
Constant torque Ict: 24A
Variable torque Pwt: 15kW
Variable torque Isqr: 32A
Imax: 36A
Size: M4
Dimensions device (LxWxH): 13.5cm|20.5cm|39cm
Weight: 7kg


CXS0150V34G2C1

Honeywell Inverters 0,5..30kW, IP20, CXS

Speed control for induction motors.
The Honeywell inverters are suitable for variable or constant torque applications.
To control pumps and fans for heating , ventilation and air conditioning systems, normally variable torque inverters are used
Industrial or process installations normally require constant torque inverters
The unit includes an AC choke, protecting against overvoltages, and an internal RFI filter (optional)
Power supply constant torque: 0.5...22kW
Power supply variable torque: 0.55...30kW
Power supply: 3 ph, 380/440 Volts
Input frequency: 45...66Hz
Output voltage: 0 - Uin
Continuous output current: Ict + 50 oC ambient, overload: 1,5x Ict, 1/10min. Ivt + 40 oC no overloadability
Starting torque: 200% from 0 rpm
Starting current: 2,5 Ict , max 2 s every 20 s max output frequency lower then 30 Hz and heatsink temperature lower then 60 oC
Output frequency: 0...500Hz
Frequency resolution: 0.01Hz
Serial communication: Interbus-S, Modbus, Echelon
Protection class: IP20
Immunity: the design fulfils EN 50082-1, 2
Emissions: EMC level I: EN 50081-2; EMC level C: EN 50081-1, 2
Safety: according EN 500178, CE, UL, C-UL, FI
Note: Models with different power supply, standard protections, graphic display and main brake chopper are available.


Constant torque Pct: 15kW
Constant torque Ict: 32A
Variable torque Pwt: 18.5kW
Variable torque Isqr: 42A
Imax: 48A
Size: M5B
Dimensions device (LxWxH): 18.5cm|21.5cm|55cm
Weight: 21kg


CXS0185V34G2C1

Honeywell Inverters 0,5..30kW, IP20, CXS

Speed control for induction motors.
The Honeywell inverters are suitable for variable or constant torque applications.
To control pumps and fans for heating , ventilation and air conditioning systems, normally variable torque inverters are used
Industrial or process installations normally require constant torque inverters
The unit includes an AC choke, protecting against overvoltages, and an internal RFI filter (optional)
Power supply constant torque: 0.5...22kW
Power supply variable torque: 0.55...30kW
Power supply: 3 ph, 380/440 Volts
Input frequency: 45...66Hz
Output voltage: 0 - Uin
Continuous output current: Ict + 50 oC ambient, overload: 1,5x Ict, 1/10min. Ivt + 40 oC no overloadability
Starting torque: 200% from 0 rpm
Starting current: 2,5 Ict , max 2 s every 20 s max output frequency lower then 30 Hz and heatsink temperature lower then 60 oC
Output frequency: 0...500Hz
Frequency resolution: 0.01Hz
Serial communication: Interbus-S, Modbus, Echelon
Protection class: IP20
Immunity: the design fulfils EN 50082-1, 2
Emissions: EMC level I: EN 50081-2; EMC level C: EN 50081-1, 2
Safety: according EN 500178, CE, UL, C-UL, FI
Note: Models with different power supply, standard protections, graphic display and main brake chopper are available.


Constant torque Pct: 18.5kW
Constant torque Ict: 42A
Variable torque Pwt: 22kW
Variable torque Isqr: 48A
Imax: 63.0A
Size: M5B
Dimensions device (LxWxH): 18.5cm|21.5cm|55cm
Weight: 21kg


CXS0220V34G2C1

Honeywell Inverters 0,5..30kW, IP20, CXS

Speed control for induction motors.
The Honeywell inverters are suitable for variable or constant torque applications.
To control pumps and fans for heating , ventilation and air conditioning systems, normally variable torque inverters are used
Industrial or process installations normally require constant torque inverters
The unit includes an AC choke, protecting against overvoltages, and an internal RFI filter (optional)
Power supply constant torque: 0.5...22kW
Power supply variable torque: 0.55...30kW
Power supply: 3 ph, 380/440 Volts
Input frequency: 45...66Hz
Output voltage: 0 - Uin
Continuous output current: Ict + 50 oC ambient, overload: 1,5x Ict, 1/10min. Ivt + 40 oC no overloadability
Starting torque: 200% from 0 rpm
Starting current: 2,5 Ict , max 2 s every 20 s max output frequency lower then 30 Hz and heatsink temperature lower then 60 oC
Output frequency: 0...500Hz
Frequency resolution: 0.01Hz
Serial communication: Interbus-S, Modbus, Echelon
Protection class: IP20
Immunity: the design fulfils EN 50082-1, 2
Emissions: EMC level I: EN 50081-2; EMC level C: EN 50081-1, 2
Safety: according EN 500178, CE, UL, C-UL, FI
Note: Models with different power supply, standard protections, graphic display and main brake chopper are available.


Constant torque Pct: 22kW
Constant torque Ict: 48A
Variable torque Pwt: 30kW
Variable torque Isqr: 60A
Imax: 72A
Size: M5B
Dimensions device (LxWxH): 18.5cm|21.5cm|55cm
Weight: 21kg


DBZ-05

Honeywell Frost protection thermostat with capillary (T69)
Accessories

Fastening clamps 5 pieces



DKF20

Honeywell Water temperature sensor NTC, cable type, KTF20 DKF20

Watertight temperature sensor with sensor cartridge.
Protection class: IP64
KTF20-B (bulk of 50 sensors of Type KTF20)
Temperature range: -20...100C
Mounting place: universal
Immersion depth: min. 50mm
Applicable well length: 135mm
Sensing element (dia x L): 6.5mm|50mm
Cable length: 2m


Temperature element: 2 x NTC20k
Wiring terminals: 3


DPIA-100-250

Honeywell Differential Pressure Transmitter, DPIA

For filter, valve, damper, fan, blower, flap and air flow monitoring and control, and environmental protection.
Kind of pressure: differential pressure, relative
Pressure connection: Supplied complete with connection kit comprising 2m of 6mm tubing, 2 connection tubes, and 4 screws
Electrical connection: M20x1,5
Protection class: IP54
Housing material: ABS and POM
Sensing method: piezoresistive
Sensing element material: ABS + POM
Media temp.: 0...50C
Medium: gaseous
Ambient temperature: -10...70C
Two pressure ranges selectable. All DPIA differential pressure transmitters are factory pre-set to pressure range 1.
Output signal: 4..20mA


Pressure range: 0...100/250Pa
Max. pressure: 20kPa


DPIA-1000-2500

Honeywell Differential Pressure Transmitter, DPIA

For filter, valve, damper, fan, blower, flap and air flow monitoring and control, and environmental protection.
Kind of pressure: differential pressure, relative
Pressure connection: Supplied complete with connection kit comprising 2m of 6mm tubing, 2 connection tubes, and 4 screws
Electrical connection: M20x1,5
Protection class: IP54
Housing material: ABS and POM
Sensing method: piezoresistive
Sensing element material: ABS + POM
Media temp.: 0...50C
Medium: gaseous
Ambient temperature: -10...70C
Two pressure ranges selectable. All DPIA differential pressure transmitters are factory pre-set to pressure range 1.
Output signal: 4..20mA


Pressure range: 0...1000/2500Pa
Max. pressure: 40kPa


DPIA-250-500

Honeywell Differential Pressure Transmitter, DPIA

For filter, valve, damper, fan, blower, flap and air flow monitoring and control, and environmental protection.
Kind of pressure: differential pressure, relative
Pressure connection: Supplied complete with connection kit comprising 2m of 6mm tubing, 2 connection tubes, and 4 screws
Electrical connection: M20x1,5
Protection class: IP54
Housing material: ABS and POM
Sensing method: piezoresistive
Sensing element material: ABS + POM
Media temp.: 0...50C
Medium: gaseous
Ambient temperature: -10...70C
Two pressure ranges selectable. All DPIA differential pressure transmitters are factory pre-set to pressure range 1.
Output signal: 4..20mA


Pressure range: 0...250/500Pa
Max. pressure: 20kPa


DPIA-500-1000

Honeywell Differential Pressure Transmitter, DPIA

For filter, valve, damper, fan, blower, flap and air flow monitoring and control, and environmental protection.
Kind of pressure: differential pressure, relative
Pressure connection: Supplied complete with connection kit comprising 2m of 6mm tubing, 2 connection tubes, and 4 screws
Electrical connection: M20x1,5
Protection class: IP54
Housing material: ABS and POM
Sensing method: piezoresistive
Sensing element material: ABS + POM
Media temp.: 0...50C
Medium: gaseous
Ambient temperature: -10...70C
Two pressure ranges selectable. All DPIA differential pressure transmitters are factory pre-set to pressure range 1.
Output signal: 4..20mA


Pressure range: 0...500/1000Pa
Max. pressure: 20kPa


DPIL/0.5

Honeywell Differential Pressure, Current sensor, Liquid

The DPIL is suitable for measurement of differential pressures across pumps, boilers, chillers, filters etc. in HVAC applications.
Kind of pressure: differential
Pressure connection: screw compression fittings for 6 mm pipe.
Electrical connection: DIN(4350-A)
Protection class: IP65
Housing material: housing in contact with medium: Ceramic/INOX 1.4305, PTFE
Sensing method: piezoresistive
Media temp.: -15...80C
Medium: liquid
Ambient temperature: -15...80C
Output signal: 4..20mA


Pressure range: 0...0.5bar
Max. pressure: 3bar


DPIL/1

Honeywell Differential Pressure, Current sensor, Liquid

The DPIL is suitable for measurement of differential pressures across pumps, boilers, chillers, filters etc. in HVAC applications.
Kind of pressure: differential
Pressure connection: screw compression fittings for 6 mm pipe.
Electrical connection: DIN(4350-A)
Protection class: IP65
Housing material: housing in contact with medium: Ceramic/INOX 1.4305, PTFE
Sensing method: piezoresistive
Media temp.: -15...80C
Medium: liquid
Ambient temperature: -15...80C
Output signal: 4..20mA


Pressure range: 0...1bar
Max. pressure: 5bar


DPIL/10

Honeywell Differential Pressure, Current sensor, Liquid

The DPIL is suitable for measurement of differential pressures across pumps, boilers, chillers, filters etc. in HVAC applications.
Kind of pressure: differential
Pressure connection: screw compression fittings for 6 mm pipe.
Electrical connection: DIN(4350-A)
Protection class: IP65
Housing material: housing in contact with medium: Ceramic/INOX 1.4305, PTFE
Sensing method: piezoresistive
Media temp.: -15...80C
Medium: liquid
Ambient temperature: -15...80C
Output signal: 4..20mA


Pressure range: 0...10bar
Max. pressure: 20/12.bar


DPIL/2.5

Honeywell Differential Pressure, Current sensor, Liquid

The DPIL is suitable for measurement of differential pressures across pumps, boilers, chillers, filters etc. in HVAC applications.
Kind of pressure: differential
Pressure connection: screw compression fittings for 6 mm pipe.
Electrical connection: DIN(4350-A)
Protection class: IP65
Housing material: housing in contact with medium: Ceramic/INOX 1.4305, PTFE
Sensing method: piezoresistive
Media temp.: -15...80C
Medium: liquid
Ambient temperature: -15...80C
Output signal: 4..20mA


Pressure range: 0...2.5bar
Max. pressure: 12bar


DPIL/4

Honeywell Differential Pressure, Current sensor, Liquid

The DPIL is suitable for measurement of differential pressures across pumps, boilers, chillers, filters etc. in HVAC applications.
Kind of pressure: differential
Pressure connection: screw compression fittings for 6 mm pipe.
Electrical connection: DIN(4350-A)
Protection class: IP65
Housing material: housing in contact with medium: Ceramic/INOX 1.4305, PTFE
Sensing method: piezoresistive
Media temp.: -15...80C
Medium: liquid
Ambient temperature: -15...80C
Output signal: 4..20mA


Pressure range: 0...4bar
Max. pressure: 12bar


DPIL/6

Honeywell Differential Pressure, Current sensor, Liquid

The DPIL is suitable for measurement of differential pressures across pumps, boilers, chillers, filters etc. in HVAC applications.
Kind of pressure: differential
Pressure connection: screw compression fittings for 6 mm pipe.
Electrical connection: DIN(4350-A)
Protection class: IP65
Housing material: housing in contact with medium: Ceramic/INOX 1.4305, PTFE
Sensing method: piezoresistive
Media temp.: -15...80C
Medium: liquid
Ambient temperature: -15...80C
Output signal: 4..20mA


Pressure range: 0...6bar
Max. pressure: 12bar


DPSA-1000

Honeywell Differential pressure switch for air (DPSA)

For monitoring filter, fan, fire damper, or air flow status of air handling systems.
Kind of pressure: differential
Pressure connection: Supplied complete with connection kit comprising 2m of 6mm tubing, 2 connection tubes, and 4 screws
Electrical connection: AMP connector 6,3x0,8 (DIN 46244) or screw terminals
Protection class: IP54
Housing material: ABS and POM
Media temp.: -20...85C
Medium: gaseous
Ambient temperature: -20...85C
Max. pressure: 5kPa


Pressure range: 200...1000Pa
Packing unit quantity: 1


DPSA-1000/BOX25

Honeywell Differential pressure switch for air (DPSA)

For monitoring filter, fan, fire damper, or air flow status of air handling systems.
Kind of pressure: differential
Pressure connection: Supplied complete with connection kit comprising 2m of 6mm tubing, 2 connection tubes, and 4 screws
Electrical connection: AMP connector 6,3x0,8 (DIN 46244) or screw terminals
Protection class: IP54
Housing material: ABS and POM
Media temp.: -20...85C
Medium: gaseous
Ambient temperature: -20...85C
Max. pressure: 5kPa


Pressure range: 200...1000Pa
Packing unit quantity: 25


DPSA-200

Honeywell Differential pressure switch for air (DPSA)

For monitoring filter, fan, fire damper, or air flow status of air handling systems.
Kind of pressure: differential
Pressure connection: Supplied complete with connection kit comprising 2m of 6mm tubing, 2 connection tubes, and 4 screws
Electrical connection: AMP connector 6,3x0,8 (DIN 46244) or screw terminals
Protection class: IP54
Housing material: ABS and POM
Media temp.: -20...85C
Medium: gaseous
Ambient temperature: -20...85C
Max. pressure: 5kPa


Pressure range: 20...200Pa
Packing unit quantity: 1


DPSA-200/BOX25

Honeywell Differential pressure switch for air (DPSA)

For monitoring filter, fan, fire damper, or air flow status of air handling systems.
Kind of pressure: differential
Pressure connection: Supplied complete with connection kit comprising 2m of 6mm tubing, 2 connection tubes, and 4 screws
Electrical connection: AMP connector 6,3x0,8 (DIN 46244) or screw terminals
Protection class: IP54
Housing material: ABS and POM
Media temp.: -20...85C
Medium: gaseous
Ambient temperature: -20...85C
Max. pressure: 5kPa


Pressure range: 20...200Pa
Packing unit quantity: 25


DPSA-400

Honeywell Differential pressure switch for air (DPSA)

For monitoring filter, fan, fire damper, or air flow status of air handling systems.
Kind of pressure: differential
Pressure connection: Supplied complete with connection kit comprising 2m of 6mm tubing, 2 connection tubes, and 4 screws
Electrical connection: AMP connector 6,3x0,8 (DIN 46244) or screw terminals
Protection class: IP54
Housing material: ABS and POM
Media temp.: -20...85C
Medium: gaseous
Ambient temperature: -20...85C
Max. pressure: 5kPa


Pressure range: 40...400Pa
Packing unit quantity: 1


DPSA-400/BOX25

Honeywell Differential pressure switch for air (DPSA)

For monitoring filter, fan, fire damper, or air flow status of air handling systems.
Kind of pressure: differential
Pressure connection: Supplied complete with connection kit comprising 2m of 6mm tubing, 2 connection tubes, and 4 screws
Electrical connection: AMP connector 6,3x0,8 (DIN 46244) or screw terminals
Protection class: IP54
Housing material: ABS and POM
Media temp.: -20...85C
Medium: gaseous
Ambient temperature: -20...85C
Max. pressure: 5kPa


Pressure range: 40...400Pa
Packing unit quantity: 25


DPSL/H

Honeywell Differential Pressure, Switch, Liquid

Differential pressure, vacuum and overpressure switch for monitoring neutral and slightly aggressive liquids and gases. It can be used as a flow switch fitted across an orifice plate.
Kind of pressure: differential pressure, relative
Pressure connection: G1/8" (DIN 259); 1/8" BSP female thread
Electrical connection: screw terminals
Protection class: IP54
Housing material: Case: Brass, Cover: Plastic, Diaphragm: EPDM
Media temp.: -10...80C
Medium: liquid/gaseous
Ambient temperature: -10...80C
Max. pressure: 10bar


Pressure range: 150...1000mbar


DPSL/L

Honeywell Differential Pressure, Switch, Liquid

Differential pressure, vacuum and overpressure switch for monitoring neutral and slightly aggressive liquids and gases. It can be used as a flow switch fitted across an orifice plate.
Kind of pressure: differential pressure, relative
Pressure connection: G1/8" (DIN 259); 1/8" BSP female thread
Electrical connection: screw terminals
Protection class: IP54
Housing material: Case: Brass, Cover: Plastic, Diaphragm: EPDM
Media temp.: -10...80C
Medium: liquid/gaseous
Ambient temperature: -10...80C
Max. pressure: 10bar


Pressure range: 40...200mbar


EAO

Honeywell IQ251 Controllers

The IQ251 is a large capacity controller designed for the control of all types of building plant. It can provide up to 128 I/O points by connecting 8 I/O modules in any combination. IQ system accessory modules may be connected to the input/output channels to provide greater I/O flexibility. They enable the IQ251 to provide sufficient capability for more complex strategies. It can operate either as a stand alone device or as part of a Building Management System.
Order example: IQ251/comms/voltage e.g. IQ251/TMNH/UK/230. I/O cards must be ordered separately
Network: Trend LAN

I/O Cards
AI: no
DI: no
AO: 8
DO: no
Comments: no
Power: no


EDO

Honeywell IQ251 Controllers

The IQ251 is a large capacity controller designed for the control of all types of building plant. It can provide up to 128 I/O points by connecting 8 I/O modules in any combination. IQ system accessory modules may be connected to the input/output channels to provide greater I/O flexibility. They enable the IQ251 to provide sufficient capability for more complex strategies. It can operate either as a stand alone device or as part of a Building Management System.
Order example: IQ251/comms/voltage e.g. IQ251/TMNH/UK/230. I/O cards must be ordered separately
Network: Trend LAN

I/O Cards
AI: no
DI: no
AO: no
DO: 8
Comments: no
Power: no


EDS-205

Honeywell Ethernet Internetwork Node Controller (EINC)

The EINC, Ethernet Internetwork Node Controller, provides the means by which the Building Management System network can incorporate an Ethernet network. The EINC operates at the internetwork level, including the necessary support for WANs (e.g. TMN support). It also provides virtual CNCs which allow supervisory or tool software running in PCs connected to the Ethernet network to connect to the BMS system.
The EDS-205 and EDS-305-M-SC are industrial 5-port Ethernet switch that supports IEE 820.3/820.3u/820.3x with 10/100M, full half duplex, MDI/MDIX autosensing RJ45 ports. The EDS-305-M-SC also has a built in relay warning function which alerts maintainers when power failures or port breaks occur and is equipped with 4 10/100T(X) ports and 1 single mode 100baseFX port, SC connector. Both devices operate over a wide temperature range and are DIN rail mounting, making them ideal for most industrial environments.
The IMC-101-M-SC,which has been designed for stable operation in industrial environments, provides conversion between 10/100BaseT(X) and 100 BaseFX. It rated to operate at temperature ranging from 0 - 60oC, and is DIN rail mounting, making it ideal for most industrial environments.

Other Ethernet devices
Model: Ethernet Switch
Network: TCP/IP
Power: 24Vac/dc
Comments: IP30


EDS-305-M-SC

Honeywell Ethernet Internetwork Node Controller (EINC)

The EINC, Ethernet Internetwork Node Controller, provides the means by which the Building Management System network can incorporate an Ethernet network. The EINC operates at the internetwork level, including the necessary support for WANs (e.g. TMN support). It also provides virtual CNCs which allow supervisory or tool software running in PCs connected to the Ethernet network to connect to the BMS system.
The EDS-205 and EDS-305-M-SC are industrial 5-port Ethernet switch that supports IEE 820.3/820.3u/820.3x with 10/100M, full half duplex, MDI/MDIX autosensing RJ45 ports. The EDS-305-M-SC also has a built in relay warning function which alerts maintainers when power failures or port breaks occur and is equipped with 4 10/100T(X) ports and 1 single mode 100baseFX port, SC connector. Both devices operate over a wide temperature range and are DIN rail mounting, making them ideal for most industrial environments.
The IMC-101-M-SC,which has been designed for stable operation in industrial environments, provides conversion between 10/100BaseT(X) and 100 BaseFX. It rated to operate at temperature ranging from 0 - 60oC, and is DIN rail mounting, making it ideal for most industrial environments.

Other Ethernet devices
Model: Ethernet Switch
Network: TCP/IP
Power: 24Vac/dc
Comments: IP30


EF20

Honeywell Earth temperature sensor, NTC, EF20

For use in greenhouses and similar applications
Protection class: IP62
Temperature element: NTC20k
Temperature range: -20...34C
Mounting place: greenhouse, earth
Wiring terminals: 2
Cable length: 5m


EIN

Honeywell IQ251 Controllers

The IQ251 is a large capacity controller designed for the control of all types of building plant. It can provide up to 128 I/O points by connecting 8 I/O modules in any combination. IQ system accessory modules may be connected to the input/output channels to provide greater I/O flexibility. They enable the IQ251 to provide sufficient capability for more complex strategies. It can operate either as a stand alone device or as part of a Building Management System.
Order example: IQ251/comms/voltage e.g. IQ251/TMNH/UK/230. I/O cards must be ordered separately
Network: Trend LAN

I/O Cards
AI: 8
DI: 8
AO: no
DO: no
Comments: no
Power: no


EM-MPO/350

Honeywell Electricity Meter, Three Phase, Multi Parameter, EM-MPO 350, EM-MPO 400

The EM-MPO/350 is a DIN rail mounted 3 phase multiparameter electricity meter with an (8 digit) LCD display and The EM-MPO/400 is a panel mounting 3 phase multi-parameter electricity meter with a backlit 3 line display. The /350 and the /400 require 5 A current transformers, whereas the /350e and /400e use the CSENSOR range of split core current sensors. Voltage transformers may be used for medium to extra high voltage. The required transformer ratio is programmable from the panel. Used in conjunction with the EMIC (Ethernet Metering Interface Controller) or a Trend IQ3/XNC MODBUS driver, logged data can be accessed directly over the Trend network.
Multi-parameter metering
Backlit LCD display
/350 and /400 use CTs (CT/.. split core range available)
/350e and /400e use current sensors (CSENSOR/.. split core sensor range available)
RS485 MODBUS interface
Interfaces to Trend system (using MODBUS driver or EMIC)
Isolated pulse output available
True RMS measurement to the 30th harmonic
RS485 port: RS485 MODBUS, 2 wire + 0 V half duplex, quarter unit load. Baud rate programmable 4k8, 9k6 19k2 baud.
Input voltage: 3x230/400Vac
Accuracy: Class 1


Current: 5A
Wiring connection: via CT
Mounting: DIN rail


EM-MPO/350e

Honeywell Electricity Meter, Three Phase, Multi Parameter, EM-MPO 350, EM-MPO 400

The EM-MPO/350 is a DIN rail mounted 3 phase multiparameter electricity meter with an (8 digit) LCD display and The EM-MPO/400 is a panel mounting 3 phase multi-parameter electricity meter with a backlit 3 line display. The /350 and the /400 require 5 A current transformers, whereas the /350e and /400e use the CSENSOR range of split core current sensors. Voltage transformers may be used for medium to extra high voltage. The required transformer ratio is programmable from the panel. Used in conjunction with the EMIC (Ethernet Metering Interface Controller) or a Trend IQ3/XNC MODBUS driver, logged data can be accessed directly over the Trend network.
Multi-parameter metering
Backlit LCD display
/350 and /400 use CTs (CT/.. split core range available)
/350e and /400e use current sensors (CSENSOR/.. split core sensor range available)
RS485 MODBUS interface
Interfaces to Trend system (using MODBUS driver or EMIC)
Isolated pulse output available
True RMS measurement to the 30th harmonic
RS485 port: RS485 MODBUS, 2 wire + 0 V half duplex, quarter unit load. Baud rate programmable 4k8, 9k6 19k2 baud.
Input voltage: 3x230/400Vac
Accuracy: Class 1


Current: no
Wiring connection: no
Mounting: DIN rail


EM-MPO/400

Honeywell Electricity Meter, Three Phase, Multi Parameter, EM-MPO 350, EM-MPO 400

The EM-MPO/350 is a DIN rail mounted 3 phase multiparameter electricity meter with an (8 digit) LCD display and The EM-MPO/400 is a panel mounting 3 phase multi-parameter electricity meter with a backlit 3 line display. The /350 and the /400 require 5 A current transformers, whereas the /350e and /400e use the CSENSOR range of split core current sensors. Voltage transformers may be used for medium to extra high voltage. The required transformer ratio is programmable from the panel. Used in conjunction with the EMIC (Ethernet Metering Interface Controller) or a Trend IQ3/XNC MODBUS driver, logged data can be accessed directly over the Trend network.
Multi-parameter metering
Backlit LCD display
/350 and /400 use CTs (CT/.. split core range available)
/350e and /400e use current sensors (CSENSOR/.. split core sensor range available)
RS485 MODBUS interface
Interfaces to Trend system (using MODBUS driver or EMIC)
Isolated pulse output available
True RMS measurement to the 30th harmonic
RS485 port: RS485 MODBUS, 2 wire + 0 V half duplex, quarter unit load. Baud rate programmable 4k8, 9k6 19k2 baud.
Input voltage: 3x230/400Vac
Accuracy: Class 1


Current: 5A
Wiring connection: via CT
Mounting: Panel Mounting


EM-MPO/400e

Honeywell Electricity Meter, Three Phase, Multi Parameter, EM-MPO 350, EM-MPO 400

The EM-MPO/350 is a DIN rail mounted 3 phase multiparameter electricity meter with an (8 digit) LCD display and The EM-MPO/400 is a panel mounting 3 phase multi-parameter electricity meter with a backlit 3 line display. The /350 and the /400 require 5 A current transformers, whereas the /350e and /400e use the CSENSOR range of split core current sensors. Voltage transformers may be used for medium to extra high voltage. The required transformer ratio is programmable from the panel. Used in conjunction with the EMIC (Ethernet Metering Interface Controller) or a Trend IQ3/XNC MODBUS driver, logged data can be accessed directly over the Trend network.
Multi-parameter metering
Backlit LCD display
/350 and /400 use CTs (CT/.. split core range available)
/350e and /400e use current sensors (CSENSOR/.. split core sensor range available)
RS485 MODBUS interface
Interfaces to Trend system (using MODBUS driver or EMIC)
Isolated pulse output available
True RMS measurement to the 30th harmonic
RS485 port: RS485 MODBUS, 2 wire + 0 V half duplex, quarter unit load. Baud rate programmable 4k8, 9k6 19k2 baud.
Input voltage: 3x230/400Vac
Accuracy: Class 1


Current: no
Wiring connection: no
Mounting: Panel Mounting


EM-MPO/SIRIO

Honeywell Electricity Meter, Three Phase, Multi Parameter, EM-MPO

Three phase, multi parameter meter capable of monitoring electrical supply components, including KWh, KVAh, KVArh, max demand, power factor and frequency.
RS485 port: ASCII to ENC2, 9600 Baud, no parity
Wiring connection: via CT or direct


Input voltage: 264Vac phase to neutral, 450Vac phase to phase
Current: Max. 7A permanent
Accuracy: 1% for V, I; 2% for VA Class 2 - IEC1036


EM-MPO/STAR3

Honeywell Electricity Meter, Three Phase, Multi Parameter, EM-MPO

Three phase, multi parameter meter capable of monitoring electrical supply components, including KWh, KVAh, KVArh, max demand, power factor and frequency.
RS485 port: ASCII to ENC2, 9600 Baud, no parity
Wiring connection: via CT or direct


Input voltage: 430Vac phase to neutral, 600Vac phase to phase direct or greater using VTs
Current: 5A
Accuracy: <0.5% for V, I, VA


EM-MPO/STAR3DIN

Honeywell Electricity Meter, Three Phase, Multi Parameter, EM-MPO

Three phase, multi parameter meter capable of monitoring electrical supply components, including KWh, KVAh, KVArh, max demand, power factor and frequency.
RS485 port: ASCII to ENC2, 9600 Baud, no parity
Wiring connection: via CT or direct


Input voltage: 430Vac phase to neutral, 600Vac phase to phase direct or greater using VTs
Current: 5A
Accuracy: <0.5% for V, I, VA


EM-SB3/0/485/CT

Honeywell Electricity Meter, Three Phase, Multi Parameter, EM-SB3

A range of three phase energy meters which allow direct reading of all relevant data, such as energy (total and partial), current and voltage, active and reactive power for the three phases. The range provides interface options for integrated pulse output and RS485 MODBUS.
3-phase energy meter, 3 x 230/400 VAC 50 Hz
CT version can measure up to 1.500A over external current transformer and DC version can measure up to 65A through direct connection.
Accuracy class B according to EN50470-3, accuracy class 1 according to IEC62053-21
7-digit, backlit, LCD display, clear read-out with 6 mm tall figures
Metering of total and partial consumed energy, partial resettable
2 tariff measuring


Current: 5A
Wiring connection: via CT
Output signal: MODBUS


EM-SB3/0/485/DC

Honeywell Electricity Meter, Three Phase, Multi Parameter, EM-SB3

A range of three phase energy meters which allow direct reading of all relevant data, such as energy (total and partial), current and voltage, active and reactive power for the three phases. The range provides interface options for integrated pulse output and RS485 MODBUS.
3-phase energy meter, 3 x 230/400 VAC 50 Hz
CT version can measure up to 1.500A over external current transformer and DC version can measure up to 65A through direct connection.
Accuracy class B according to EN50470-3, accuracy class 1 according to IEC62053-21
7-digit, backlit, LCD display, clear read-out with 6 mm tall figures
Metering of total and partial consumed energy, partial resettable
2 tariff measuring


Current: 65A
Wiring connection: direct
Output signal: MODBUS


EM-SB3/0/P/CT

Honeywell Electricity Meter, Three Phase, Multi Parameter, EM-SB3

A range of three phase energy meters which allow direct reading of all relevant data, such as energy (total and partial), current and voltage, active and reactive power for the three phases. The range provides interface options for integrated pulse output and RS485 MODBUS.
3-phase energy meter, 3 x 230/400 VAC 50 Hz
CT version can measure up to 1.500A over external current transformer and DC version can measure up to 65A through direct connection.
Accuracy class B according to EN50470-3, accuracy class 1 according to IEC62053-21
7-digit, backlit, LCD display, clear read-out with 6 mm tall figures
Metering of total and partial consumed energy, partial resettable
2 tariff measuring


Current: 5A
Wiring connection: via CT
Output signal: Pulse


EM-SB3/0/P/DC

Honeywell Electricity Meter, Three Phase, Multi Parameter, EM-SB3

A range of three phase energy meters which allow direct reading of all relevant data, such as energy (total and partial), current and voltage, active and reactive power for the three phases. The range provides interface options for integrated pulse output and RS485 MODBUS.
3-phase energy meter, 3 x 230/400 VAC 50 Hz
CT version can measure up to 1.500A over external current transformer and DC version can measure up to 65A through direct connection.
Accuracy class B according to EN50470-3, accuracy class 1 according to IEC62053-21
7-digit, backlit, LCD display, clear read-out with 6 mm tall figures
Metering of total and partial consumed energy, partial resettable
2 tariff measuring


Current: 65A
Wiring connection: direct
Output signal: Pulse


EM1/N

Honeywell Electricity Meter, Single Phase, EM1

Electronic KWh meter for sub metering, with DIN rail mounting.
Input voltage: 230Vac
Current: 10(40)A
Wiring connection: direct
Accuracy: Class 2 - IEC 61036
Output signal: volt free pulsed


EM3/CT/N

Honeywell Electricity Meter, Three Phase Pulse, EM3

Three phase electronic KWh meters, with DIN rail mounting, volt free pulsed outputs.
Output signal: volt free pulsed


Input voltage: 230/400Vac 3 phase, 3 or 4 wire
Current: 5A
Wiring connection: via CT
Accuracy: Class 1 - EN 61036


EM3/CT/ODIN

Honeywell Electricity Meter, Three Phase Pulse, EM3

Three phase electronic KWh meters, with DIN rail mounting, volt free pulsed outputs.
Output signal: volt free pulsed


Input voltage: 3x230/400Vac
Current: 10A
Wiring connection: via CT
Accuracy: Class 2 - IEC 61036


EM3/D/ODIN

Honeywell Electricity Meter, Three Phase Pulse, EM3

Three phase electronic KWh meters, with DIN rail mounting, volt free pulsed outputs.
Output signal: volt free pulsed


Input voltage: 3x230/400Vac
Current: 65A
Wiring connection: direct
Accuracy: Class 2 - IEC 61036


EMIC/MBA/10

Honeywell Ethernet Metering Interface Controller, EMIC

The EMIC (Ethernet Metering Interface Controller) provides an interface for up to 8, 16 or 32 energy meters. It connects to the Trend system using Ethernet, and to the meters using RS485, MODBUS. It sits on the Trend internetwork, and takes a Lan for its own use, each meter being represented by an outstation on that Lan. Data from each meter is collected using the RS485 bus and stored in the EMIC within the relevant outstation. Each meter can be chosen from a range of meters from various suppliers including the Trend EM-MPO/SIRIO and /STAR3. It can be configured using an integral web server
Versions for 8, 16, or 32 MODBUS meters
A wide range of easily selectable meter definitions is available
Configurable using built-in web pages
Meters appear as outstations on a Lan
RS485 cable provided
EMIC IPTool can find EMICs IP addresses
Can calculate cumulative kWh over defined period
Network: TCP/IP

MBus
Interface: M-Bus
Comments: For 10 devices


EMIC/MBA/20

Honeywell Ethernet Metering Interface Controller, EMIC

The EMIC (Ethernet Metering Interface Controller) provides an interface for up to 8, 16 or 32 energy meters. It connects to the Trend system using Ethernet, and to the meters using RS485, MODBUS. It sits on the Trend internetwork, and takes a Lan for its own use, each meter being represented by an outstation on that Lan. Data from each meter is collected using the RS485 bus and stored in the EMIC within the relevant outstation. Each meter can be chosen from a range of meters from various suppliers including the Trend EM-MPO/SIRIO and /STAR3. It can be configured using an integral web server
Versions for 8, 16, or 32 MODBUS meters
A wide range of easily selectable meter definitions is available
Configurable using built-in web pages
Meters appear as outstations on a Lan
RS485 cable provided
EMIC IPTool can find EMICs IP addresses
Can calculate cumulative kWh over defined period
Network: TCP/IP

MBus
Interface: M-Bus
Comments: For 20 devices


EMIC/MBA/3

Honeywell Ethernet Metering Interface Controller, EMIC

The EMIC (Ethernet Metering Interface Controller) provides an interface for up to 8, 16 or 32 energy meters. It connects to the Trend system using Ethernet, and to the meters using RS485, MODBUS. It sits on the Trend internetwork, and takes a Lan for its own use, each meter being represented by an outstation on that Lan. Data from each meter is collected using the RS485 bus and stored in the EMIC within the relevant outstation. Each meter can be chosen from a range of meters from various suppliers including the Trend EM-MPO/SIRIO and /STAR3. It can be configured using an integral web server
Versions for 8, 16, or 32 MODBUS meters
A wide range of easily selectable meter definitions is available
Configurable using built-in web pages
Meters appear as outstations on a Lan
RS485 cable provided
EMIC IPTool can find EMICs IP addresses
Can calculate cumulative kWh over defined period
Network: TCP/IP

MBus
Interface: M-Bus
Comments: For 3 devices


EMIC/MDA/16

Honeywell Ethernet Metering Interface Controller, EMIC

The EMIC (Ethernet Metering Interface Controller) provides an interface for up to 8, 16 or 32 energy meters. It connects to the Trend system using Ethernet, and to the meters using RS485, MODBUS. It sits on the Trend internetwork, and takes a Lan for its own use, each meter being represented by an outstation on that Lan. Data from each meter is collected using the RS485 bus and stored in the EMIC within the relevant outstation. Each meter can be chosen from a range of meters from various suppliers including the Trend EM-MPO/SIRIO and /STAR3. It can be configured using an integral web server
Versions for 8, 16, or 32 MODBUS meters
A wide range of easily selectable meter definitions is available
Configurable using built-in web pages
Meters appear as outstations on a Lan
RS485 cable provided
EMIC IPTool can find EMICs IP addresses
Can calculate cumulative kWh over defined period
Network: TCP/IP

ModBus
Interface: ModBus
Comments: For 16 devices


EMIC/MDA/32

Honeywell Ethernet Metering Interface Controller, EMIC

The EMIC (Ethernet Metering Interface Controller) provides an interface for up to 8, 16 or 32 energy meters. It connects to the Trend system using Ethernet, and to the meters using RS485, MODBUS. It sits on the Trend internetwork, and takes a Lan for its own use, each meter being represented by an outstation on that Lan. Data from each meter is collected using the RS485 bus and stored in the EMIC within the relevant outstation. Each meter can be chosen from a range of meters from various suppliers including the Trend EM-MPO/SIRIO and /STAR3. It can be configured using an integral web server
Versions for 8, 16, or 32 MODBUS meters
A wide range of easily selectable meter definitions is available
Configurable using built-in web pages
Meters appear as outstations on a Lan
RS485 cable provided
EMIC IPTool can find EMICs IP addresses
Can calculate cumulative kWh over defined period
Network: TCP/IP

ModBus
Interface: ModBus
Comments: For 32 devices


EMIC/MDA/8

Honeywell Ethernet Metering Interface Controller, EMIC

The EMIC (Ethernet Metering Interface Controller) provides an interface for up to 8, 16 or 32 energy meters. It connects to the Trend system using Ethernet, and to the meters using RS485, MODBUS. It sits on the Trend internetwork, and takes a Lan for its own use, each meter being represented by an outstation on that Lan. Data from each meter is collected using the RS485 bus and stored in the EMIC within the relevant outstation. Each meter can be chosen from a range of meters from various suppliers including the Trend EM-MPO/SIRIO and /STAR3. It can be configured using an integral web server
Versions for 8, 16, or 32 MODBUS meters
A wide range of easily selectable meter definitions is available
Configurable using built-in web pages
Meters appear as outstations on a Lan
RS485 cable provided
EMIC IPTool can find EMICs IP addresses
Can calculate cumulative kWh over defined period
Network: TCP/IP

ModBus
Interface: ModBus
Comments: For 8 devices


ENCLS-600002

Honeywell IQL11 Controllers
Accessories

IQECO/IQL secondary terminal cover.



ENCLS/

Honeywell IQ241 Controller accessories
Accessories

600x600mm enclosure (accepts all IQ200 series controllers except IQ246)



ENCLS/MBOX/IQ21X

Honeywell IQ21x Controllers
Accessories

Steel enclosure for Trend IQ21x products



ENCLS/MBOX/IQ22X

Honeywell Ethernet Internetwork Node Controller (EINC)
Accessories

Steel enclosure for the Trend IQ22x and NBOX products



EVA1-DANFOSS

Honeywell Electronic radiator controller, HR40 HR40F HR10F
Valve adapters for HR40

Danfoss RAV/RAVL/RA



EX-FT015

Honeywell Frost protection thermostat (Ex) for duct mounting (Ex-FT)

The frost protection thermostat reliably monitors the temperature in hot water-heated air heaters. If the temperature falls below the set value, the thermostat switches off.
Line voltage frost protection thermostat for heater batteries in air handling units. Degree of Ex-protection: Ex II 2 G/D EEx de IIC T6 IP65 T80 oC.
Electrical connection: terminal connection M16x1,5
Protection class: IP65
Housing material: die cast metal GD Al Si 12 to DIN 1725
Ambient temperature: -15...60C
Switch function/capacity: SPDT 250 Vac, 3(2) A
Certificates: ATEX-approval No. PTB 02 ATEX 1121
Thermostat application: frost protection thermostat
Temp. setpoint range: 4...15C
Differential fixed: 4K
Max. perm. temp. at sensor: 130C


Capillary tube length: 6m


EX-FTB015

Honeywell Frost protection thermostat (Ex) for duct mounting (Ex-FT)

The frost protection thermostat reliably monitors the temperature in hot water-heated air heaters. If the temperature falls below the set value, the thermostat switches off.
Line voltage frost protection thermostat for heater batteries in air handling units. Degree of Ex-protection: Ex II 2 G/D EEx de IIC T6 IP65 T80 oC.
Electrical connection: terminal connection M16x1,5
Protection class: IP65
Housing material: die cast metal GD Al Si 12 to DIN 1725
Ambient temperature: -15...60C
Switch function/capacity: SPDT 250 Vac, 3(2) A
Certificates: ATEX-approval No. PTB 02 ATEX 1121
Thermostat application: frost protection thermostat
Temp. setpoint range: 4...15C
Differential fixed: 4K
Max. perm. temp. at sensor: 130C


Capillary tube length: 3m


F42006646-001

Honeywell Electronic room controller 24Vac 2 x 3-position modulating output, T8078B
Accessories

Range stops, to limit setpoint adjustment (20 pieces)



F42007110-001

Honeywell Electronic room controller 24Vac 2 x 3-position modulating output, T8078B
Accessories

Opaque tamperproof cover to prevent thermostat from damage



F42007110-002

Honeywell Electronic room controller 24Vac 2 x 3-position modulating output, T8078B
Accessories

Transparent tamperproof cover to prevent thermostat from damage



F42007789-001

Honeywell Electronic room controller 24Vac 2 x 3-position modulating output, T8078B
Accessories

Wall-plate to allow mounting onto different wall boxes



FHBN05+ED1

Honeywell Differential pressure transmitter with terminal connection for liquid, gas (FHBN + ED1)

Differential pressure transmitter, 3-wire system.
For differential pressure control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: differential pressure, relative
Pressure connection: internal thread G1/4
Electrical connection: terminal connection 2 x M16x1,5
Protection class: IP65
Sensing method: mechanical-inductive
Sensing element material: 1.4305 + 1.4571
Media temp.: 0...70C
Media temp. limit: temperatures up to 85 oC are allowable for short periods. Higher temperatures are possible, provided that the limit is safeguarded by suitable measures (e.g. water tube trap, see Accessories for Pressure Switches / Transmitters)
Medium: liquid/gaseous
Ambient temperature: 0...45C
Power supply: 19..29Vac, 24..36Vdc
Accuracy class: 1,0.
Output signal: 0/2..10Vdc + 0/4..20mA


Pressure range: 0...0.5bar
Max. pressure: 10bar


FHBN05+ED3

Honeywell Differential pressure transmitter with plug connection for liquid, gas (FHBN + ED3)

Differential pressure transmitter, 3-wire system.
For differential pressure control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: differential pressure, relative
Pressure connection: internal thread G1/4
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Sensing method: mechanical-inductive
Sensing element material: 1.4305 + 1.4571
Media temp.: 0...70C
Media temp. limit: temperatures up to 85 oC are allowable for short periods. Higher temperatures are possible, provided that the limit is safeguarded by suitable measures (e.g. water tube trap, see Accessories for Pressure Switches / Transmitters)
Medium: liquid/gaseous
Ambient temperature: 0...45C
Power supply: 19..29Vac, 24..36Vdc
Accuracy class: 1,0.
Output signal: 0..10Vdc + 0..20mA


Pressure range: 0...0.5bar
Max. pressure: 10bar


FHBN1+ED1

Honeywell Differential pressure transmitter with terminal connection for liquid, gas (FHBN + ED1)

Differential pressure transmitter, 3-wire system.
For differential pressure control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: differential pressure, relative
Pressure connection: internal thread G1/4
Electrical connection: terminal connection 2 x M16x1,5
Protection class: IP65
Sensing method: mechanical-inductive
Sensing element material: 1.4305 + 1.4571
Media temp.: 0...70C
Media temp. limit: temperatures up to 85 oC are allowable for short periods. Higher temperatures are possible, provided that the limit is safeguarded by suitable measures (e.g. water tube trap, see Accessories for Pressure Switches / Transmitters)
Medium: liquid/gaseous
Ambient temperature: 0...45C
Power supply: 19..29Vac, 24..36Vdc
Accuracy class: 1,0.
Output signal: 0/2..10Vdc + 0/4..20mA


Pressure range: 0...1bar
Max. pressure: 15bar


FHBN1+ED3

Honeywell Differential pressure transmitter with plug connection for liquid, gas (FHBN + ED3)

Differential pressure transmitter, 3-wire system.
For differential pressure control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: differential pressure, relative
Pressure connection: internal thread G1/4
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Sensing method: mechanical-inductive
Sensing element material: 1.4305 + 1.4571
Media temp.: 0...70C
Media temp. limit: temperatures up to 85 oC are allowable for short periods. Higher temperatures are possible, provided that the limit is safeguarded by suitable measures (e.g. water tube trap, see Accessories for Pressure Switches / Transmitters)
Medium: liquid/gaseous
Ambient temperature: 0...45C
Power supply: 19..29Vac, 24..36Vdc
Accuracy class: 1,0.
Output signal: 0..10Vdc + 0..20mA


Pressure range: 0...1bar
Max. pressure: 15bar


FHBN1-355-L

Honeywell Differential pressure transmitter for liquids and gases, LON, FHBN 355-L

Differential pressure sensor with LON connection.
For differential pressure control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: differential pressure, relative
Pressure connection: G1/4 male
Electrical connection: terminal connection 2 x M16x1,5
Protection class: IP65
Housing material: Macrolon
Sensing method: mechanical-inductive
Sensing element material: 1.4571 + 1.4435
Media temp.: 0...70C
Medium: liquid/gaseous
Ambient temperature: 0...50C
Power supply: 19..29Vac, 24..36Vdc
Output signal: LON
LonMark(R) profile: pressure profile 1030
Transceiver type: FTT 10A
LON service and operation LED visible without disassembly.


Pressure range: 0...1bar
Max. pressure: 10bar


FHBN10+ED1

Honeywell Differential pressure transmitter with terminal connection for liquid, gas (FHBN + ED1)

Differential pressure transmitter, 3-wire system.
For differential pressure control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: differential pressure, relative
Pressure connection: internal thread G1/4
Electrical connection: terminal connection 2 x M16x1,5
Protection class: IP65
Sensing method: mechanical-inductive
Sensing element material: 1.4305 + 1.4571
Media temp.: 0...70C
Media temp. limit: temperatures up to 85 oC are allowable for short periods. Higher temperatures are possible, provided that the limit is safeguarded by suitable measures (e.g. water tube trap, see Accessories for Pressure Switches / Transmitters)
Medium: liquid/gaseous
Ambient temperature: 0...45C
Power supply: 19..29Vac, 24..36Vdc
Accuracy class: 1,0.
Output signal: 0/2..10Vdc + 0/4..20mA


Pressure range: 0...10bar
Max. pressure: 25bar


FHBN10+ED3

Honeywell Differential pressure transmitter with plug connection for liquid, gas (FHBN + ED3)

Differential pressure transmitter, 3-wire system.
For differential pressure control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: differential pressure, relative
Pressure connection: internal thread G1/4
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Sensing method: mechanical-inductive
Sensing element material: 1.4305 + 1.4571
Media temp.: 0...70C
Media temp. limit: temperatures up to 85 oC are allowable for short periods. Higher temperatures are possible, provided that the limit is safeguarded by suitable measures (e.g. water tube trap, see Accessories for Pressure Switches / Transmitters)
Medium: liquid/gaseous
Ambient temperature: 0...45C
Power supply: 19..29Vac, 24..36Vdc
Accuracy class: 1,0.
Output signal: 0..10Vdc + 0..20mA


Pressure range: 0...10bar
Max. pressure: 25bar


FHBN10-355-L

Honeywell Differential pressure transmitter for liquids and gases, LON, FHBN 355-L

Differential pressure sensor with LON connection.
For differential pressure control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: differential pressure, relative
Pressure connection: G1/4 male
Electrical connection: terminal connection 2 x M16x1,5
Protection class: IP65
Housing material: Macrolon
Sensing method: mechanical-inductive
Sensing element material: 1.4571 + 1.4435
Media temp.: 0...70C
Medium: liquid/gaseous
Ambient temperature: 0...50C
Power supply: 19..29Vac, 24..36Vdc
Output signal: LON
LonMark(R) profile: pressure profile 1030
Transceiver type: FTT 10A
LON service and operation LED visible without disassembly.


Pressure range: 0...10bar
Max. pressure: 15bar


FHBN3+ED1

Honeywell Differential pressure transmitter with terminal connection for liquid, gas (FHBN + ED1)

Differential pressure transmitter, 3-wire system.
For differential pressure control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: differential pressure, relative
Pressure connection: internal thread G1/4
Electrical connection: terminal connection 2 x M16x1,5
Protection class: IP65
Sensing method: mechanical-inductive
Sensing element material: 1.4305 + 1.4571
Media temp.: 0...70C
Media temp. limit: temperatures up to 85 oC are allowable for short periods. Higher temperatures are possible, provided that the limit is safeguarded by suitable measures (e.g. water tube trap, see Accessories for Pressure Switches / Transmitters)
Medium: liquid/gaseous
Ambient temperature: 0...45C
Power supply: 19..29Vac, 24..36Vdc
Accuracy class: 1,0.
Output signal: 0/2..10Vdc + 0/4..20mA


Pressure range: 0...2.5bar
Max. pressure: 15bar


FHBN3+ED3

Honeywell Differential pressure transmitter with plug connection for liquid, gas (FHBN + ED3)

Differential pressure transmitter, 3-wire system.
For differential pressure control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: differential pressure, relative
Pressure connection: internal thread G1/4
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Sensing method: mechanical-inductive
Sensing element material: 1.4305 + 1.4571
Media temp.: 0...70C
Media temp. limit: temperatures up to 85 oC are allowable for short periods. Higher temperatures are possible, provided that the limit is safeguarded by suitable measures (e.g. water tube trap, see Accessories for Pressure Switches / Transmitters)
Medium: liquid/gaseous
Ambient temperature: 0...45C
Power supply: 19..29Vac, 24..36Vdc
Accuracy class: 1,0.
Output signal: 0..10Vdc + 0..20mA


Pressure range: 0...2.5bar
Max. pressure: 15bar


FHBN3-355-L

Honeywell Differential pressure transmitter for liquids and gases, LON, FHBN 355-L

Differential pressure sensor with LON connection.
For differential pressure control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: differential pressure, relative
Pressure connection: G1/4 male
Electrical connection: terminal connection 2 x M16x1,5
Protection class: IP65
Housing material: Macrolon
Sensing method: mechanical-inductive
Sensing element material: 1.4571 + 1.4435
Media temp.: 0...70C
Medium: liquid/gaseous
Ambient temperature: 0...50C
Power supply: 19..29Vac, 24..36Vdc
Output signal: LON
LonMark(R) profile: pressure profile 1030
Transceiver type: FTT 10A
LON service and operation LED visible without disassembly.


Pressure range: 0...2.5bar
Max. pressure: 15bar


FHBN5+ED1

Honeywell Differential pressure transmitter with terminal connection for liquid, gas (FHBN + ED1)

Differential pressure transmitter, 3-wire system.
For differential pressure control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: differential pressure, relative
Pressure connection: internal thread G1/4
Electrical connection: terminal connection 2 x M16x1,5
Protection class: IP65
Sensing method: mechanical-inductive
Sensing element material: 1.4305 + 1.4571
Media temp.: 0...70C
Media temp. limit: temperatures up to 85 oC are allowable for short periods. Higher temperatures are possible, provided that the limit is safeguarded by suitable measures (e.g. water tube trap, see Accessories for Pressure Switches / Transmitters)
Medium: liquid/gaseous
Ambient temperature: 0...45C
Power supply: 19..29Vac, 24..36Vdc
Accuracy class: 1,0.
Output signal: 0/2..10Vdc + 0/4..20mA


Pressure range: 0...5bar
Max. pressure: 15bar


FHBN5+ED3

Honeywell Differential pressure transmitter with plug connection for liquid, gas (FHBN + ED3)

Differential pressure transmitter, 3-wire system.
For differential pressure control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: differential pressure, relative
Pressure connection: internal thread G1/4
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Sensing method: mechanical-inductive
Sensing element material: 1.4305 + 1.4571
Media temp.: 0...70C
Media temp. limit: temperatures up to 85 oC are allowable for short periods. Higher temperatures are possible, provided that the limit is safeguarded by suitable measures (e.g. water tube trap, see Accessories for Pressure Switches / Transmitters)
Medium: liquid/gaseous
Ambient temperature: 0...45C
Power supply: 19..29Vac, 24..36Vdc
Accuracy class: 1,0.
Output signal: 0..10Vdc + 0..20mA


Pressure range: 0...5bar
Max. pressure: 15bar


FHBN5-355-L

Honeywell Differential pressure transmitter for liquids and gases, LON, FHBN 355-L

Differential pressure sensor with LON connection.
For differential pressure control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: differential pressure, relative
Pressure connection: G1/4 male
Electrical connection: terminal connection 2 x M16x1,5
Protection class: IP65
Housing material: Macrolon
Sensing method: mechanical-inductive
Sensing element material: 1.4571 + 1.4435
Media temp.: 0...70C
Medium: liquid/gaseous
Ambient temperature: 0...50C
Power supply: 19..29Vac, 24..36Vdc
Output signal: LON
LonMark(R) profile: pressure profile 1030
Transceiver type: FTT 10A
LON service and operation LED visible without disassembly.


Pressure range: 0...5bar
Max. pressure: 15bar


FN025+ED1

Honeywell Pressure transmitter with terminal connection for liquid, gas (FNED1)

Pressure transmitter, 3-wire system.
For pressure control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: internal thread G1/4, external thread G1/2
Electrical connection: terminal connection 2 x M16x1,5
Protection class: IP65
Sensing method: mechanical-inductive
Sensing element material: 1.4104 + 1.4571
Media temp.: 0...70C
Media temp. limit: temperatures up to 85 oC are allowable for short periods. Higher temperatures are possible, provided that the limit is safeguarded by suitable measures (e.g. water tube trap, see Accessories for Pressure Switches / Transmitters)
Medium: liquid/gaseous
Ambient temperature: 0...45C
Power supply: 19..29Vac, 24..36Vdc
Accuracy class: 1,0
Output signal: 0/2..10Vdc + 0/4..20mA


Pressure range: 0...0.25bar
Max. pressure: 6bar


FN025+ED3

Honeywell Pressure transmitter with plug connection for liquid, gas (FNED3)

Pressure transmitter, 3-wire system.
For pressure control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: internal thread G1/4, external thread G1/2
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Sensing method: mechanical-inductive
Sensing element material: 1.4104 + 1.4571
Media temp.: 0...70C
Media temp. limit: temperatures up to 85 oC are allowable for short periods. Higher temperatures are possible, provided that the limit is safeguarded by suitable measures (e.g. water tube trap, see Accessories for Pressure Switches / Transmitters)
Medium: liquid/gaseous
Ambient temperature: 0...45C
Power supply: 19..29Vac, 24..36Vdc
Accuracy class: 1,0
Output signal: 0..10Vdc + 0..20mA


Pressure range: 0...0.25bar
Max. pressure: 6bar


FN05+ED1

Honeywell Pressure transmitter with terminal connection for liquid, gas (FNED1)

Pressure transmitter, 3-wire system.
For pressure control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: internal thread G1/4, external thread G1/2
Electrical connection: terminal connection 2 x M16x1,5
Protection class: IP65
Sensing method: mechanical-inductive
Sensing element material: 1.4104 + 1.4571
Media temp.: 0...70C
Media temp. limit: temperatures up to 85 oC are allowable for short periods. Higher temperatures are possible, provided that the limit is safeguarded by suitable measures (e.g. water tube trap, see Accessories for Pressure Switches / Transmitters)
Medium: liquid/gaseous
Ambient temperature: 0...45C
Power supply: 19..29Vac, 24..36Vdc
Accuracy class: 1,0
Output signal: 0/2..10Vdc + 0/4..20mA


Pressure range: 0...0.5bar
Max. pressure: 6bar


FN05+ED3

Honeywell Pressure transmitter with plug connection for liquid, gas (FNED3)

Pressure transmitter, 3-wire system.
For pressure control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: internal thread G1/4, external thread G1/2
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Sensing method: mechanical-inductive
Sensing element material: 1.4104 + 1.4571
Media temp.: 0...70C
Media temp. limit: temperatures up to 85 oC are allowable for short periods. Higher temperatures are possible, provided that the limit is safeguarded by suitable measures (e.g. water tube trap, see Accessories for Pressure Switches / Transmitters)
Medium: liquid/gaseous
Ambient temperature: 0...45C
Power supply: 19..29Vac, 24..36Vdc
Accuracy class: 1,0
Output signal: 0..10Vdc + 0..20mA


Pressure range: 0...0.5bar
Max. pressure: 6bar


FN1+ED1

Honeywell Pressure transmitter with terminal connection for liquid, gas (FNED1)

Pressure transmitter, 3-wire system.
For pressure control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: internal thread G1/4, external thread G1/2
Electrical connection: terminal connection 2 x M16x1,5
Protection class: IP65
Sensing method: mechanical-inductive
Sensing element material: 1.4104 + 1.4571
Media temp.: 0...70C
Media temp. limit: temperatures up to 85 oC are allowable for short periods. Higher temperatures are possible, provided that the limit is safeguarded by suitable measures (e.g. water tube trap, see Accessories for Pressure Switches / Transmitters)
Medium: liquid/gaseous
Ambient temperature: 0...45C
Power supply: 19..29Vac, 24..36Vdc
Accuracy class: 1,0
Output signal: 0/2..10Vdc + 0/4..20mA


Pressure range: 0...1bar
Max. pressure: 6bar


FN1+ED3

Honeywell Pressure transmitter with plug connection for liquid, gas (FNED3)

Pressure transmitter, 3-wire system.
For pressure control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: internal thread G1/4, external thread G1/2
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Sensing method: mechanical-inductive
Sensing element material: 1.4104 + 1.4571
Media temp.: 0...70C
Media temp. limit: temperatures up to 85 oC are allowable for short periods. Higher temperatures are possible, provided that the limit is safeguarded by suitable measures (e.g. water tube trap, see Accessories for Pressure Switches / Transmitters)
Medium: liquid/gaseous
Ambient temperature: 0...45C
Power supply: 19..29Vac, 24..36Vdc
Accuracy class: 1,0
Output signal: 0..10Vdc + 0..20mA


Pressure range: 0...1bar
Max. pressure: 6bar


FN3+ED1

Honeywell Pressure transmitter with terminal connection for liquid, gas (FNED1)

Pressure transmitter, 3-wire system.
For pressure control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: internal thread G1/4, external thread G1/2
Electrical connection: terminal connection 2 x M16x1,5
Protection class: IP65
Sensing method: mechanical-inductive
Sensing element material: 1.4104 + 1.4571
Media temp.: 0...70C
Media temp. limit: temperatures up to 85 oC are allowable for short periods. Higher temperatures are possible, provided that the limit is safeguarded by suitable measures (e.g. water tube trap, see Accessories for Pressure Switches / Transmitters)
Medium: liquid/gaseous
Ambient temperature: 0...45C
Power supply: 19..29Vac, 24..36Vdc
Accuracy class: 1,0
Output signal: 0/2..10Vdc + 0/4..20mA


Pressure range: 0...2.5bar
Max. pressure: 16bar


FN3+ED3

Honeywell Pressure transmitter with plug connection for liquid, gas (FNED3)

Pressure transmitter, 3-wire system.
For pressure control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: internal thread G1/4, external thread G1/2
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Sensing method: mechanical-inductive
Sensing element material: 1.4104 + 1.4571
Media temp.: 0...70C
Media temp. limit: temperatures up to 85 oC are allowable for short periods. Higher temperatures are possible, provided that the limit is safeguarded by suitable measures (e.g. water tube trap, see Accessories for Pressure Switches / Transmitters)
Medium: liquid/gaseous
Ambient temperature: 0...45C
Power supply: 19..29Vac, 24..36Vdc
Accuracy class: 1,0
Output signal: 0..10Vdc + 0..20mA


Pressure range: 0...2.5bar
Max. pressure: 16bar


FN505+ED1

Honeywell Pressure transmitter with terminal connection for liquid, gas (FNED1)

Pressure transmitter, 3-wire system.
For pressure control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: internal thread G1/4, external thread G1/2
Electrical connection: terminal connection 2 x M16x1,5
Protection class: IP65
Sensing method: mechanical-inductive
Sensing element material: 1.4104 + 1.4571
Media temp.: 0...70C
Media temp. limit: temperatures up to 85 oC are allowable for short periods. Higher temperatures are possible, provided that the limit is safeguarded by suitable measures (e.g. water tube trap, see Accessories for Pressure Switches / Transmitters)
Medium: liquid/gaseous
Ambient temperature: 0...45C
Power supply: 19..29Vac, 24..36Vdc
Accuracy class: 1,0
Output signal: 0/2..10Vdc + 0/4..20mA


Pressure range: 0...0.05bar
Max. pressure: 2.5bar


FN505+ED3

Honeywell Pressure transmitter with plug connection for liquid, gas (FNED3)

Pressure transmitter, 3-wire system.
For pressure control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: internal thread G1/4, external thread G1/2
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Sensing method: mechanical-inductive
Sensing element material: 1.4104 + 1.4571
Media temp.: 0...70C
Media temp. limit: temperatures up to 85 oC are allowable for short periods. Higher temperatures are possible, provided that the limit is safeguarded by suitable measures (e.g. water tube trap, see Accessories for Pressure Switches / Transmitters)
Medium: liquid/gaseous
Ambient temperature: 0...45C
Power supply: 19..29Vac, 24..36Vdc
Accuracy class: 1,0
Output signal: 0..10Vdc + 0..20mA


Pressure range: 0...0.05bar
Max. pressure: 2.5bar


FN510+ED1

Honeywell Pressure transmitter with terminal connection for liquid, gas (FNED1)

Pressure transmitter, 3-wire system.
For pressure control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: internal thread G1/4, external thread G1/2
Electrical connection: terminal connection 2 x M16x1,5
Protection class: IP65
Sensing method: mechanical-inductive
Sensing element material: 1.4104 + 1.4571
Media temp.: 0...70C
Media temp. limit: temperatures up to 85 oC are allowable for short periods. Higher temperatures are possible, provided that the limit is safeguarded by suitable measures (e.g. water tube trap, see Accessories for Pressure Switches / Transmitters)
Medium: liquid/gaseous
Ambient temperature: 0...45C
Power supply: 19..29Vac, 24..36Vdc
Accuracy class: 1,0
Output signal: 0/2..10Vdc + 0/4..20mA


Pressure range: 0...0.1bar
Max. pressure: 5bar


FN510+ED3

Honeywell Pressure transmitter with plug connection for liquid, gas (FNED3)

Pressure transmitter, 3-wire system.
For pressure control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: internal thread G1/4, external thread G1/2
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Sensing method: mechanical-inductive
Sensing element material: 1.4104 + 1.4571
Media temp.: 0...70C
Media temp. limit: temperatures up to 85 oC are allowable for short periods. Higher temperatures are possible, provided that the limit is safeguarded by suitable measures (e.g. water tube trap, see Accessories for Pressure Switches / Transmitters)
Medium: liquid/gaseous
Ambient temperature: 0...45C
Power supply: 19..29Vac, 24..36Vdc
Accuracy class: 1,0
Output signal: 0..10Vdc + 0..20mA


Pressure range: 0...0.1bar
Max. pressure: 5bar


FT015

Honeywell Frost protection thermostat for duct mounting (FT)

The frost protection thermostats reliably monitor the temperature in hot water-heated air heaters. If the temperature falls below the set value, the thermostat switches off.
Line voltage frost protection thermostat for heater batteries in air handling units.
Electrical connection: Plug DIN EN 175301
Protection class: IP54
Housing material: die cast metal GD Al Si 12 to DIN 1725
Ambient temperature: -15...70C
Switch function/capacity: SPDT 250 Vac, 8(5) A
Optional functions: add the type numbers below to the listed type numbers for extra functionality as described
-302: terminal connection housing, IP65
-206: with reclose prevention
Thermostat application: frost protection thermostat
Temp. setpoint range: 4...15C
Temperature element: capillary
Max. perm. temp. at sensor: 200C


Capillary tube length: 6m


FTB015

Honeywell Frost protection thermostat for duct mounting (FT)

The frost protection thermostats reliably monitor the temperature in hot water-heated air heaters. If the temperature falls below the set value, the thermostat switches off.
Line voltage frost protection thermostat for heater batteries in air handling units.
Electrical connection: Plug DIN EN 175301
Protection class: IP54
Housing material: die cast metal GD Al Si 12 to DIN 1725
Ambient temperature: -15...70C
Switch function/capacity: SPDT 250 Vac, 8(5) A
Optional functions: add the type numbers below to the listed type numbers for extra functionality as described
-302: terminal connection housing, IP65
-206: with reclose prevention
Thermostat application: frost protection thermostat
Temp. setpoint range: 4...15C
Temperature element: capillary
Max. perm. temp. at sensor: 200C


Capillary tube length: 3m


FTS015

Honeywell Frost protection thermostat for duct mounting, 2 phases (FTS)

Two phases frost protection thermostat with limiter contact and integrated priority selection
phase 1, opening heating valve
phase 2, switch off the unit
Line voltage frost protection thermostat for heater batteries in air handling units.
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Housing material: die cast metal GD Al Si 12 to DIN 1725
Ambient temperature: 12...50C
Switch function/capacity: SPDT 250 Vac Microswitch / 8A
Power supply: 19..29Vac, 24..36Vdc
Output signal: 0..10Vdc
Thermostat application: frost protection thermostat, 2-phases
Temp. setpoint range: 3...10C


Capillary tube length: 6m


FTSB015

Honeywell Frost protection thermostat for duct mounting, 2 phases (FTS)

Two phases frost protection thermostat with limiter contact and integrated priority selection
phase 1, opening heating valve
phase 2, switch off the unit
Line voltage frost protection thermostat for heater batteries in air handling units.
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Housing material: die cast metal GD Al Si 12 to DIN 1725
Ambient temperature: 12...50C
Switch function/capacity: SPDT 250 Vac Microswitch / 8A
Power supply: 19..29Vac, 24..36Vdc
Output signal: 0..10Vdc
Thermostat application: frost protection thermostat, 2-phases
Temp. setpoint range: 3...10C


Capillary tube length: 3m


FVN105+ED1

Honeywell Vacuum transmitter with terminal connection for liquid, gas (FVNED1)

Vacuum transmitter, 3-wire system.
For vacuum control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: vacuum, relative
Pressure connection: internal thread G1/4, external thread G1/2
Electrical connection: terminal connection 2 x M16x1,5
Protection class: IP65
Sensing method: mechanical-inductive
Sensing element material: 1.4104 + 1.4571
Media temp.: 0...70C
Media temp. limit: temperatures up to 85 oC are allowable for short periods. Higher temperatures are possible, provided that the limit is safeguarded by suitable measures (e.g. water tube trap, see Accessories for Pressure Switches / Transmitters)
Medium: liquid/gaseous
Ambient temperature: 0...45C
Power supply: 19..29Vac, 24..36Vdc
Accuracy class: 1,0
Output signal: 0/2..10Vdc + 0/4..20mA


Pressure range: -1...5bar
Max. pressure: 25bar


FVN105+ED3

Honeywell Vacuum transmitter with plug connection for liquid, gas (FVNED3)

Vacuum transmitter, 3-wire system.
For vacuum control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: vacuum, relative
Pressure connection: internal thread G1/4, external thread G1/2
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Sensing method: mechanical-inductive
Sensing element material: 1.4104 + 1.4571
Media temp.: 0...70C
Media temp. limit: temperatures up to 85 oC are allowable for short periods. Higher temperatures are possible, provided that the limit is safeguarded by suitable measures (e.g. water tube trap, see Accessories for Pressure Switches / Transmitters)
Medium: liquid/gaseous
Ambient temperature: 0...45C
Power supply: 19..29Vac, 24..36Vdc
Accuracy class: 1,0
Output signal: 0..10Vdc + 0..20mA


Pressure range: -1...5bar
Max. pressure: 25bar


FVN111+ED1

Honeywell Vacuum transmitter with terminal connection for liquid, gas (FVNED1)

Vacuum transmitter, 3-wire system.
For vacuum control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: vacuum, relative
Pressure connection: internal thread G1/4, external thread G1/2
Electrical connection: terminal connection 2 x M16x1,5
Protection class: IP65
Sensing method: mechanical-inductive
Sensing element material: 1.4104 + 1.4571
Media temp.: 0...70C
Media temp. limit: temperatures up to 85 oC are allowable for short periods. Higher temperatures are possible, provided that the limit is safeguarded by suitable measures (e.g. water tube trap, see Accessories for Pressure Switches / Transmitters)
Medium: liquid/gaseous
Ambient temperature: 0...45C
Power supply: 19..29Vac, 24..36Vdc
Accuracy class: 1,0
Output signal: 0/2..10Vdc + 0/4..20mA


Pressure range: -1...0bar
Max. pressure: 6bar


FVN111+ED3

Honeywell Vacuum transmitter with plug connection for liquid, gas (FVNED3)

Vacuum transmitter, 3-wire system.
For vacuum control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: vacuum, relative
Pressure connection: internal thread G1/4, external thread G1/2
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Sensing method: mechanical-inductive
Sensing element material: 1.4104 + 1.4571
Media temp.: 0...70C
Media temp. limit: temperatures up to 85 oC are allowable for short periods. Higher temperatures are possible, provided that the limit is safeguarded by suitable measures (e.g. water tube trap, see Accessories for Pressure Switches / Transmitters)
Medium: liquid/gaseous
Ambient temperature: 0...45C
Power supply: 19..29Vac, 24..36Vdc
Accuracy class: 1,0
Output signal: 0..10Vdc + 0..20mA


Pressure range: -1...0bar
Max. pressure: 6bar


FVN112+ED1

Honeywell Vacuum transmitter with terminal connection for liquid, gas (FVNED1)

Vacuum transmitter, 3-wire system.
For vacuum control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: vacuum, relative
Pressure connection: internal thread G1/4, external thread G1/2
Electrical connection: terminal connection 2 x M16x1,5
Protection class: IP65
Sensing method: mechanical-inductive
Sensing element material: 1.4104 + 1.4571
Media temp.: 0...70C
Media temp. limit: temperatures up to 85 oC are allowable for short periods. Higher temperatures are possible, provided that the limit is safeguarded by suitable measures (e.g. water tube trap, see Accessories for Pressure Switches / Transmitters)
Medium: liquid/gaseous
Ambient temperature: 0...45C
Power supply: 19..29Vac, 24..36Vdc
Accuracy class: 1,0
Output signal: 0/2..10Vdc + 0/4..20mA


Pressure range: -1...1bar
Max. pressure: 6bar


FVN112+ED3

Honeywell Vacuum transmitter with plug connection for liquid, gas (FVNED3)

Vacuum transmitter, 3-wire system.
For vacuum control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: vacuum, relative
Pressure connection: internal thread G1/4, external thread G1/2
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Sensing method: mechanical-inductive
Sensing element material: 1.4104 + 1.4571
Media temp.: 0...70C
Media temp. limit: temperatures up to 85 oC are allowable for short periods. Higher temperatures are possible, provided that the limit is safeguarded by suitable measures (e.g. water tube trap, see Accessories for Pressure Switches / Transmitters)
Medium: liquid/gaseous
Ambient temperature: 0...45C
Power supply: 19..29Vac, 24..36Vdc
Accuracy class: 1,0
Output signal: 0..10Vdc + 0..20mA


Pressure range: -1...1bar
Max. pressure: 6bar


FVN125+ED1

Honeywell Vacuum transmitter with terminal connection for liquid, gas (FVNED1)

Vacuum transmitter, 3-wire system.
For vacuum control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: vacuum, relative
Pressure connection: internal thread G1/4, external thread G1/2
Electrical connection: terminal connection 2 x M16x1,5
Protection class: IP65
Sensing method: mechanical-inductive
Sensing element material: 1.4104 + 1.4571
Media temp.: 0...70C
Media temp. limit: temperatures up to 85 oC are allowable for short periods. Higher temperatures are possible, provided that the limit is safeguarded by suitable measures (e.g. water tube trap, see Accessories for Pressure Switches / Transmitters)
Medium: liquid/gaseous
Ambient temperature: 0...45C
Power supply: 19..29Vac, 24..36Vdc
Accuracy class: 1,0
Output signal: 0/2..10Vdc + 0/4..20mA


Pressure range: -0.25...0.25bar
Max. pressure: 3bar


FVN125+ED3

Honeywell Vacuum transmitter with plug connection for liquid, gas (FVNED3)

Vacuum transmitter, 3-wire system.
For vacuum control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: vacuum, relative
Pressure connection: internal thread G1/4, external thread G1/2
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Sensing method: mechanical-inductive
Sensing element material: 1.4104 + 1.4571
Media temp.: 0...70C
Media temp. limit: temperatures up to 85 oC are allowable for short periods. Higher temperatures are possible, provided that the limit is safeguarded by suitable measures (e.g. water tube trap, see Accessories for Pressure Switches / Transmitters)
Medium: liquid/gaseous
Ambient temperature: 0...45C
Power supply: 19..29Vac, 24..36Vdc
Accuracy class: 1,0
Output signal: 0..10Vdc + 0..20mA


Pressure range: -0.25...0.25bar
Max. pressure: 3bar


G12-100

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ)
Accessories

Immersion tube, G1/2, immersion length 100 mm



G12-150

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ)
Accessories

Immersion tube, G1/2, immersion length 150 mm



G12-200

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ)
Accessories

Immersion tube, G1/2, immersion length 200 mm



G12-250

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ)
Accessories

Immersion tube, G1/2, immersion length 250 mm



GB12

Honeywell Solenoid valves for gaseous and liquid medium (GB)

The 2/2-way valves of the GB-series are suitable for general applications and are not dependent operationally on a specific minimum differential pressure. They are ideal choice for installation in situations where differential pressure fluctuate greatly and are not possible to determine precisely in advance. They are also suitable for use in heating and cooling circuits.
Valve application: gaseous/liquid
Materials: Casing: (see below), either brass or stainless steel (1.4410) Internal parts: stainless steel
Media temp.: -10...90C
Ambient temperature: -10...55C
Operating mode: normally closed
Power supply: 230V 45..60Hz
Working range: 0...16bar

Brass valve body, Sealings: Perbunan
DN size: 12mm
Kvs value: 2.8
Connections: G1/2


GB12VA

Honeywell Solenoid valves for gaseous and liquid medium (GB)

The 2/2-way valves of the GB-series are suitable for general applications and are not dependent operationally on a specific minimum differential pressure. They are ideal choice for installation in situations where differential pressure fluctuate greatly and are not possible to determine precisely in advance. They are also suitable for use in heating and cooling circuits.
Valve application: gaseous/liquid
Materials: Casing: (see below), either brass or stainless steel (1.4410) Internal parts: stainless steel
Media temp.: -10...90C
Ambient temperature: -10...55C
Operating mode: normally closed
Power supply: 230V 45..60Hz
Working range: 0...16bar

Stainless steel 1.4410 valve body, Sealings: Viton(R)
DN size: 12mm
Kvs value: 2.8
Connections: G1/2


GB20

Honeywell Solenoid valves for gaseous and liquid medium (GB)

The 2/2-way valves of the GB-series are suitable for general applications and are not dependent operationally on a specific minimum differential pressure. They are ideal choice for installation in situations where differential pressure fluctuate greatly and are not possible to determine precisely in advance. They are also suitable for use in heating and cooling circuits.
Valve application: gaseous/liquid
Materials: Casing: (see below), either brass or stainless steel (1.4410) Internal parts: stainless steel
Media temp.: -10...90C
Ambient temperature: -10...55C
Operating mode: normally closed
Power supply: 230V 45..60Hz
Working range: 0...16bar

Brass valve body, Sealings: Perbunan
DN size: 20mm
Kvs value: 5
Connections: G3/4


GB20VA

Honeywell Solenoid valves for gaseous and liquid medium (GB)

The 2/2-way valves of the GB-series are suitable for general applications and are not dependent operationally on a specific minimum differential pressure. They are ideal choice for installation in situations where differential pressure fluctuate greatly and are not possible to determine precisely in advance. They are also suitable for use in heating and cooling circuits.
Valve application: gaseous/liquid
Materials: Casing: (see below), either brass or stainless steel (1.4410) Internal parts: stainless steel
Media temp.: -10...90C
Ambient temperature: -10...55C
Operating mode: normally closed
Power supply: 230V 45..60Hz
Working range: 0...16bar

Stainless steel 1.4410 valve body, Sealings: Viton(R)
DN size: 20mm
Kvs value: 5
Connections: G3/4


GB25

Honeywell Solenoid valves for gaseous and liquid medium (GB)

The 2/2-way valves of the GB-series are suitable for general applications and are not dependent operationally on a specific minimum differential pressure. They are ideal choice for installation in situations where differential pressure fluctuate greatly and are not possible to determine precisely in advance. They are also suitable for use in heating and cooling circuits.
Valve application: gaseous/liquid
Materials: Casing: (see below), either brass or stainless steel (1.4410) Internal parts: stainless steel
Media temp.: -10...90C
Ambient temperature: -10...55C
Operating mode: normally closed
Power supply: 230V 45..60Hz
Working range: 0...16bar

Brass valve body, Sealings: Perbunan
DN size: 25mm
Kvs value: 10
Connections: G1


GB25VA

Honeywell Solenoid valves for gaseous and liquid medium (GB)

The 2/2-way valves of the GB-series are suitable for general applications and are not dependent operationally on a specific minimum differential pressure. They are ideal choice for installation in situations where differential pressure fluctuate greatly and are not possible to determine precisely in advance. They are also suitable for use in heating and cooling circuits.
Valve application: gaseous/liquid
Materials: Casing: (see below), either brass or stainless steel (1.4410) Internal parts: stainless steel
Media temp.: -10...90C
Ambient temperature: -10...55C
Operating mode: normally closed
Power supply: 230V 45..60Hz
Working range: 0...16bar

Stainless steel 1.4410 valve body, Sealings: Viton(R)
DN size: 25mm
Kvs value: 10
Connections: G1


GF20

Honeywell Damp-proof temperature sensor, NTC, GF20

for use in greenhouses and similar applications
Approvals: IEC144
Protection class: IP30
Temperature element: NTC20k
Temperature range: -20...30C
Mounting place: greenhouse, air
Wiring terminals: 2
Cable length: 5m


GK13

Honeywell Solenoid valves for media up to 180 degree (GK)

The GK series piston-type solenoid valves are ideal for use as shutoff valves in heating and process engineering systems, e. g. hot water and steam. The valves require no minimum differential pressure.
Valve application: gaseous/liquid
Materials: Casing: (see below), either brass or cast iron GG25, Membrane: PTFE and graphite
Media temp.: 0...180C
Ambient temperature: 0...55C
Operating mode: normally closed
Power supply: 230V 50Hz
Working range: 0...10bar

Screwed version, material: brass
DN size: 13mm
Kvs value: 3.7
Connections: G1/2


GK20

Honeywell Solenoid valves for media up to 180 degree (GK)

The GK series piston-type solenoid valves are ideal for use as shutoff valves in heating and process engineering systems, e. g. hot water and steam. The valves require no minimum differential pressure.
Valve application: gaseous/liquid
Materials: Casing: (see below), either brass or cast iron GG25, Membrane: PTFE and graphite
Media temp.: 0...180C
Ambient temperature: 0...55C
Operating mode: normally closed
Power supply: 230V 50Hz
Working range: 0...10bar

Screwed version, material: brass
DN size: 20mm
Kvs value: 5
Connections: G3/4


GK25

Honeywell Solenoid valves for media up to 180 degree (GK)

The GK series piston-type solenoid valves are ideal for use as shutoff valves in heating and process engineering systems, e. g. hot water and steam. The valves require no minimum differential pressure.
Valve application: gaseous/liquid
Materials: Casing: (see below), either brass or cast iron GG25, Membrane: PTFE and graphite
Media temp.: 0...180C
Ambient temperature: 0...55C
Operating mode: normally closed
Power supply: 230V 50Hz
Working range: 0...10bar

Screwed version, material: brass
DN size: 25mm
Kvs value: 10
Connections: G1


GK25F

Honeywell Solenoid valves for media up to 180 degree (GK)

The GK series piston-type solenoid valves are ideal for use as shutoff valves in heating and process engineering systems, e. g. hot water and steam. The valves require no minimum differential pressure.
Valve application: gaseous/liquid
Materials: Casing: (see below), either brass or cast iron GG25, Membrane: PTFE and graphite
Media temp.: 0...180C
Ambient temperature: 0...55C
Operating mode: normally closed
Power supply: 230V 50Hz
Working range: 0...10bar

Flanged version, material: cast iron GG25
DN size: 25mm
Kvs value: 10
Connections: flange


GK32

Honeywell Solenoid valves for media up to 180 degree (GK)

The GK series piston-type solenoid valves are ideal for use as shutoff valves in heating and process engineering systems, e. g. hot water and steam. The valves require no minimum differential pressure.
Valve application: gaseous/liquid
Materials: Casing: (see below), either brass or cast iron GG25, Membrane: PTFE and graphite
Media temp.: 0...180C
Ambient temperature: 0...55C
Operating mode: normally closed
Power supply: 230V 50Hz
Working range: 0...10bar

Screwed version, material: brass
DN size: 32mm
Kvs value: 16
Connections: G1 1/4


GK32F

Honeywell Solenoid valves for media up to 180 degree (GK)

The GK series piston-type solenoid valves are ideal for use as shutoff valves in heating and process engineering systems, e. g. hot water and steam. The valves require no minimum differential pressure.
Valve application: gaseous/liquid
Materials: Casing: (see below), either brass or cast iron GG25, Membrane: PTFE and graphite
Media temp.: 0...180C
Ambient temperature: 0...55C
Operating mode: normally closed
Power supply: 230V 50Hz
Working range: 0...10bar

Flanged version, material: cast iron GG25
DN size: 32mm
Kvs value: 16
Connections: flange


GK40

Honeywell Solenoid valves for media up to 180 degree (GK)

The GK series piston-type solenoid valves are ideal for use as shutoff valves in heating and process engineering systems, e. g. hot water and steam. The valves require no minimum differential pressure.
Valve application: gaseous/liquid
Materials: Casing: (see below), either brass or cast iron GG25, Membrane: PTFE and graphite
Media temp.: 0...180C
Ambient temperature: 0...55C
Operating mode: normally closed
Power supply: 230V 50Hz
Working range: 0...10bar

Screwed version, material: brass
DN size: 40mm
Kvs value: 16
Connections: G1 1/2


GK40F

Honeywell Solenoid valves for media up to 180 degree (GK)

The GK series piston-type solenoid valves are ideal for use as shutoff valves in heating and process engineering systems, e. g. hot water and steam. The valves require no minimum differential pressure.
Valve application: gaseous/liquid
Materials: Casing: (see below), either brass or cast iron GG25, Membrane: PTFE and graphite
Media temp.: 0...180C
Ambient temperature: 0...55C
Operating mode: normally closed
Power supply: 230V 50Hz
Working range: 0...10bar

Flanged version, material: cast iron GG25
DN size: 40mm
Kvs value: 16
Connections: flange


GK50

Honeywell Solenoid valves for media up to 180 degree (GK)

The GK series piston-type solenoid valves are ideal for use as shutoff valves in heating and process engineering systems, e. g. hot water and steam. The valves require no minimum differential pressure.
Valve application: gaseous/liquid
Materials: Casing: (see below), either brass or cast iron GG25, Membrane: PTFE and graphite
Media temp.: 0...180C
Ambient temperature: 0...55C
Operating mode: normally closed
Power supply: 230V 50Hz
Working range: 0...10bar

Screwed version, material: brass
DN size: 50mm
Kvs value: 36
Connections: G2


GK50F

Honeywell Solenoid valves for media up to 180 degree (GK)

The GK series piston-type solenoid valves are ideal for use as shutoff valves in heating and process engineering systems, e. g. hot water and steam. The valves require no minimum differential pressure.
Valve application: gaseous/liquid
Materials: Casing: (see below), either brass or cast iron GG25, Membrane: PTFE and graphite
Media temp.: 0...180C
Ambient temperature: 0...55C
Operating mode: normally closed
Power supply: 230V 50Hz
Working range: 0...10bar

Flanged version, material: cast iron GG25
DN size: 50mm
Kvs value: 36
Connections: flange


GS

Honeywell Solenoid valves (Ex) for gas, liquid gas/fuel (Ex-K)
Accessories

Rectifier / Plug



GT4

Honeywell Signal separator, 4 channel, GT4

Four channel signal separator for galvanic separation of analogue transmitter signals and evaluation devices.
For suppression of interference signals and influences from earth loops.
Input signal: 0..10 Vdc (Ri >220 kohm); or 0..20 mA using a 500 ohm resistor at the input
Output signal: 0..10 Vdc (max. 1 mA)
Mounting: DIN rail
The four input channels (and also the power supply) are not galvanically isolated from each other. The four output channels (and also the power supply) are not galvanically isolated from each other.
Power supply: 24Vacdc


GVCPI-100

Honeywell Solenoid gas valve flanged, normally closed, GVF
CPI switches

CPI switch for the GVF100-230



GVCPI-20-25

Honeywell Solenoid gas valve screwed, normally closed, GVS
CPI switches

CPI switch for the GVS20-230 & GVS25-230



GVCPI-32-40

Honeywell Solenoid gas valve screwed, normally closed, GVS
CPI switches

CPI switch for the GVS32-230 & GVS40-230



GVCPI-50

Honeywell Solenoid gas valve screwed, normally closed, GVS
CPI switches

CPI switch for the GVS50-230



GVCPI-65F-80

Honeywell Solenoid gas valve flanged, normally closed, GVF
CPI switches

CPI switch for the GVF65-230 and GVF80-230



GVF100-230

Honeywell Solenoid gas valve flanged, normally closed, GVF

Class "A" Safety Shutoff Solenoid Gas Valve with threaded connections.
For control and regulation of gaseous fluids in gas power burners, gas boilers, ovens, furnaces and other gas consuming appliances.
Gas valve type: non regulated ON/OFF normally closed, fast opening
Media: natural gas, propane, air.
Materials: aluminium die cast body
Protection class: IP54
Electrical connection: PG11
Approvals: class "A" in accordance with EN161
Optional Closed Position Indication Switch (CPI switch) is ordered separately
GVF65-230 and GVF80-230 have adjustable maximum flow rate on the bottom of the coil
4 auxiliary pressure taps with Rp 1/4" threaded connections, 2 on the inlet side, 2 on the outlet side.
Max. operating pressure: 200mbar
Port connection: flanges ISO7005
Ambient temperature: -15...60C
Maximum opening time: 1s
Maximum closing time: 1s

Flanged 220...240 Vac versions
Valve size: 4inch
Optional CPI-switch: GVCPI-100


GVF65-230

Honeywell Solenoid gas valve flanged, normally closed, GVF

Class "A" Safety Shutoff Solenoid Gas Valve with threaded connections.
For control and regulation of gaseous fluids in gas power burners, gas boilers, ovens, furnaces and other gas consuming appliances.
Gas valve type: non regulated ON/OFF normally closed, fast opening
Media: natural gas, propane, air.
Materials: aluminium die cast body
Protection class: IP54
Electrical connection: PG11
Approvals: class "A" in accordance with EN161
Optional Closed Position Indication Switch (CPI switch) is ordered separately
GVF65-230 and GVF80-230 have adjustable maximum flow rate on the bottom of the coil
4 auxiliary pressure taps with Rp 1/4" threaded connections, 2 on the inlet side, 2 on the outlet side.
Max. operating pressure: 200mbar
Port connection: flanges ISO7005
Ambient temperature: -15...60C
Maximum opening time: 1s
Maximum closing time: 1s

Flanged 220...240 Vac versions
Valve size: 2 1/2inch
Optional CPI-switch: GVCPI-65F-80


GVF80-230

Honeywell Solenoid gas valve flanged, normally closed, GVF

Class "A" Safety Shutoff Solenoid Gas Valve with threaded connections.
For control and regulation of gaseous fluids in gas power burners, gas boilers, ovens, furnaces and other gas consuming appliances.
Gas valve type: non regulated ON/OFF normally closed, fast opening
Media: natural gas, propane, air.
Materials: aluminium die cast body
Protection class: IP54
Electrical connection: PG11
Approvals: class "A" in accordance with EN161
Optional Closed Position Indication Switch (CPI switch) is ordered separately
GVF65-230 and GVF80-230 have adjustable maximum flow rate on the bottom of the coil
4 auxiliary pressure taps with Rp 1/4" threaded connections, 2 on the inlet side, 2 on the outlet side.
Max. operating pressure: 200mbar
Port connection: flanges ISO7005
Ambient temperature: -15...60C
Maximum opening time: 1s
Maximum closing time: 1s

Flanged 220...240 Vac versions
Valve size: 3inch
Optional CPI-switch: GVCPI-65F-80


GVS20-230

Honeywell Solenoid gas valve screwed, normally closed, GVS

Class "A" Safety Shutoff Solenoid Gas Valve with threaded connections.
For control and regulation of gaseous fluids in gas power burners, gas boilers, ovens, furnaces and other gas consuming appliances.
Gas valve type: non regulated ON/OFF normally closed, fast opening
Media: natural gas, propane, air
Materials: aluminium die cast body
Protection class: IP54
Electrical connection: PG11
Approvals: class "A" in accordance with EN161
Optional Closed Position Indication Switch (CPI switch) is ordered separately
GVS80-230 has adjustable maximum flow rate on top of the coil
Max. operating pressure: 200mbar
Port connection: internal threads
Threads type: BSP
Ambient temperature: -15...60C
Maximum opening time: 1s
Maximum closing time: 1s

Threaded 220...240 Vac versions
Valve size: 3/4inch
Optional CPI-switch: GVCPI-20-25


GVS25-230

Honeywell Solenoid gas valve screwed, normally closed, GVS

Class "A" Safety Shutoff Solenoid Gas Valve with threaded connections.
For control and regulation of gaseous fluids in gas power burners, gas boilers, ovens, furnaces and other gas consuming appliances.
Gas valve type: non regulated ON/OFF normally closed, fast opening
Media: natural gas, propane, air
Materials: aluminium die cast body
Protection class: IP54
Electrical connection: PG11
Approvals: class "A" in accordance with EN161
Optional Closed Position Indication Switch (CPI switch) is ordered separately
GVS80-230 has adjustable maximum flow rate on top of the coil
Max. operating pressure: 200mbar
Port connection: internal threads
Threads type: BSP
Ambient temperature: -15...60C
Maximum opening time: 1s
Maximum closing time: 1s

Threaded 220...240 Vac versions
Valve size: 1inch
Optional CPI-switch: GVCPI-20-25


GVS32-230

Honeywell Solenoid gas valve screwed, normally closed, GVS

Class "A" Safety Shutoff Solenoid Gas Valve with threaded connections.
For control and regulation of gaseous fluids in gas power burners, gas boilers, ovens, furnaces and other gas consuming appliances.
Gas valve type: non regulated ON/OFF normally closed, fast opening
Media: natural gas, propane, air
Materials: aluminium die cast body
Protection class: IP54
Electrical connection: PG11
Approvals: class "A" in accordance with EN161
Optional Closed Position Indication Switch (CPI switch) is ordered separately
GVS80-230 has adjustable maximum flow rate on top of the coil
Max. operating pressure: 200mbar
Port connection: internal threads
Threads type: BSP
Ambient temperature: -15...60C
Maximum opening time: 1s
Maximum closing time: 1s

Threaded 220...240 Vac versions
Valve size: 1 1/4inch
Optional CPI-switch: GVCPI-32-40


GVS40-230

Honeywell Solenoid gas valve screwed, normally closed, GVS

Class "A" Safety Shutoff Solenoid Gas Valve with threaded connections.
For control and regulation of gaseous fluids in gas power burners, gas boilers, ovens, furnaces and other gas consuming appliances.
Gas valve type: non regulated ON/OFF normally closed, fast opening
Media: natural gas, propane, air
Materials: aluminium die cast body
Protection class: IP54
Electrical connection: PG11
Approvals: class "A" in accordance with EN161
Optional Closed Position Indication Switch (CPI switch) is ordered separately
GVS80-230 has adjustable maximum flow rate on top of the coil
Max. operating pressure: 200mbar
Port connection: internal threads
Threads type: BSP
Ambient temperature: -15...60C
Maximum opening time: 1s
Maximum closing time: 1s

Threaded 220...240 Vac versions
Valve size: 1 1/2inch
Optional CPI-switch: GVCPI-32-40


GVS50-230

Honeywell Solenoid gas valve screwed, normally closed, GVS

Class "A" Safety Shutoff Solenoid Gas Valve with threaded connections.
For control and regulation of gaseous fluids in gas power burners, gas boilers, ovens, furnaces and other gas consuming appliances.
Gas valve type: non regulated ON/OFF normally closed, fast opening
Media: natural gas, propane, air
Materials: aluminium die cast body
Protection class: IP54
Electrical connection: PG11
Approvals: class "A" in accordance with EN161
Optional Closed Position Indication Switch (CPI switch) is ordered separately
GVS80-230 has adjustable maximum flow rate on top of the coil
Max. operating pressure: 200mbar
Port connection: internal threads
Threads type: BSP
Ambient temperature: -15...60C
Maximum opening time: 1s
Maximum closing time: 1s

Threaded 220...240 Vac versions
Valve size: 2inch
Optional CPI-switch: GVCPI-50


H12

Honeywell Differential pressure transmitter for air, SK, SKV, SK -AK, SKV -AK


Plug in bracket for DIN-rail mounting, for more accessories see Accessories for Pressure Switches / Transmitters)



H3

Honeywell Frost protection thermostat for duct mounting (FT)
Accessories

Capillary tube holder



H600A1022

Honeywell Room humidistat, H600A

Line voltage humidistat for humidity control of rooms.
Switch function/capacity: SPDT 230 Vac, 2 A
With removable setpoint knob
R.H. setpoint range: 20...80%rh
R.H. hysteresis switching point: 5%rh
Ambient temperature: 10...50C
R.H. sensing element: nylon
(De) Humidification application: D + H
Mounting place: internal wall


H7011A1000

Honeywell Air duct R.H.- and temperature sensor, H7011A H7011B

Approvals: IEC751 class B for Pt1000 sensor
Protection class: IP54
R.H. output shortcut protected.
R.H. range: 5...95%rh
R.H. sensing element: capacitive
R.H. output signal: 0..1/10V=
Power supply: 24Vac
Mounting place: air duct
Immersion depth: 300mm


Temperature element: no
Temperature range: no
Wiring terminals: 4


H7011B1008

Honeywell Air duct R.H.- and temperature sensor, H7011A H7011B

Approvals: IEC751 class B for Pt1000 sensor
Protection class: IP54
R.H. output shortcut protected.
R.H. range: 5...95%rh
R.H. sensing element: capacitive
R.H. output signal: 0..1/10V=
Power supply: 24Vac
Mounting place: air duct
Immersion depth: 300mm


Temperature element: Pt1000
Temperature range: -30...70C
Wiring terminals: 6


H7011B1016

Honeywell Air duct R.H.- and temperature sensor, H7011A H7011B

Approvals: IEC751 class B for Pt1000 sensor
Protection class: IP54
R.H. output shortcut protected.
R.H. range: 5...95%rh
R.H. sensing element: capacitive
R.H. output signal: 0..1/10V=
Power supply: 24Vac
Mounting place: air duct
Immersion depth: 300mm


Temperature element: NTC10k fast
Temperature range: -30...70C
Wiring terminals: 6


H7011B1024

Honeywell Air duct R.H.- and temperature sensor, H7011A H7011B

Approvals: IEC751 class B for Pt1000 sensor
Protection class: IP54
R.H. output shortcut protected.
R.H. range: 5...95%rh
R.H. sensing element: capacitive
R.H. output signal: 0..1/10V=
Power supply: 24Vac
Mounting place: air duct
Immersion depth: 300mm


Temperature element: NTC20k
Temperature range: -30...70C
Wiring terminals: 6


H7012A1009

Honeywell R.H.- controller, 1 control output, Micronik100, R7420F
Sensors

Room R.H.-sensor



H7015A1006

Honeywell R.H.- controller, 1 control output, Micronik100, R7420F
Sensors

Air duct R.H.-sensor



H7015B1060

Honeywell Air duct R.H.- and temperature transmitter, H7015B

Protection class: IP65
Relative humidity sensor accuracy 2,5%.
Output signal: temperature: 0..10 V
relative humidity: 0..10 V
R.H. range: 0...100%rh
R.H. sensing element: capacitive
Power supply: 24Vacdc
Mounting place: air duct
Immersion depth: 235mm


Temperature range: 0...50C
Wiring terminals: 5
Note: no


H7015B1080

Honeywell Air duct R.H.- and temperature transmitter, H7015B

Protection class: IP65
Relative humidity sensor accuracy 2,5%.
Output signal: temperature: 0..10 V
relative humidity: 0..10 V
R.H. range: 0...100%rh
R.H. sensing element: capacitive
Power supply: 24Vacdc
Mounting place: air duct
Immersion depth: 235mm


Temperature range: -30...70C
Wiring terminals: 7
Note: extra output: NTC20k sensor


H7018A1003

Honeywell Dew-point sensor, H7018A1003

This early-warning dew-point sensor is designed for use in monitoring cooling water pipes or chilled surfaces in order to determine if temperatures are approaching the dewpoint. It is suitable for mounting on flat and round surfaces. The sensor measures the relative humidity prevailing directly at the chilled surface and can thus be used to:
regulating cooling performance
switching cooling systems ON and OFF
signalling if the temperature is approaching the dew-point
Switching point at 90 %rh
Switch function/capacity: potential free semi-conductor contact, load max. 15 mA
R.H. hysteresis switching point: 5%rh
Ambient temperature: -10...70C
Cable length: 2m
Housing (HxWxD): 15.5mm|32mm|50mm


H7410A1007

Honeywell Local command module, R-bus, IRC, T7410A1002 H7410A1007

Remote setpoint adjustment unit with LCD and integrated room temperature sensor.
Must be connected to Room bus IRC.
Mounting: internal wall
Protection class: IP30
Display functions: temperature, occupancy, mode of operation
Three buttons for temperature setpoint adjustment, time and occupancy setting. Input for occupancy sensor/switch.
Power supply: 24Vac
Temperature element: NTC20k
Temperature range: 0...40C
Wiring terminals: 6
Housing (HxWxD): 128mm|80mm|34mm


R.H. sensing element: capacitive


H7410B1005

Honeywell Local setpoint module, IRC, T7410B H7410B

Remote setpoint adjustment unit with integrated room temperature sensor.
Must be connected to Room bus IRC.
Mounting: internal wall
Protection class: IP30
Input for occupancy sensor/switch.
Power supply: 24Vac
Temperature element: NTC20k
Temperature range: 0...40C
Wiring terminals: 6
Setpoint knob: -...+C
Housing (HxWxD): 128mm|80mm|34mm


R.H. sensing element: capacitive


HA30

Honeywell Hometronic modules for Convenience

Hometronic is the state-of-the-art Home Automation-System, it has a modular design to meet individual end-user needs for Convenience, like: light-, shading-, cooling-, appliance-control and water-control.
The functionality of the system depends on the installed modules and its configuration. Due to the modular system architecture Hometronic can be configured and upgraded according to individual customer requirements.
Application information: For further application information, please visit: http://www.hometronic.com

Convenience RF-modules
Product description: Shutter switch: RF-wall-module for shutters, venetian blinds, sun blinds for continuously adjusting positioning and tilt of shading elements


HA70

Honeywell Hometronic modules for Convenience

Hometronic is the state-of-the-art Home Automation-System, it has a modular design to meet individual end-user needs for Convenience, like: light-, shading-, cooling-, appliance-control and water-control.
The functionality of the system depends on the installed modules and its configuration. Due to the modular system architecture Hometronic can be configured and upgraded according to individual customer requirements.
Application information: For further application information, please visit: http://www.hometronic.com

Convenience RF-modules
Product description: Shutter belt drive: RF-belt-drive for continuously adjusting positioning of shutters


HAC30

Honeywell Hometronic modules for Convenience

Hometronic is the state-of-the-art Home Automation-System, it has a modular design to meet individual end-user needs for Convenience, like: light-, shading-, cooling-, appliance-control and water-control.
The functionality of the system depends on the installed modules and its configuration. Due to the modular system architecture Hometronic can be configured and upgraded according to individual customer requirements.
Application information: For further application information, please visit: http://www.hometronic.com

Convenience RF-modules
Product description: Doorcontact set for HA30


HAV20

Honeywell Hometronic modules for Remote access, Security and Safety

Hometronic is the state-of-the-art Home Automation-System, it has a modular design to meet individual end-user needs such as:
Remote-access: Remote operating via phone/internet, tele-monitoring/surveillance, remote-maintenance
Security and Safety: burglary-alarm, fire-/gas detection, presence simulation, waterleakage detection and alarm-messages
The functionality of the system depends on the installed modules and its configuration. Due to the modular system architecture Hometronic can be configured and upgraded according to individual customer requirements.
Application information: For further application information, please visit: http://www.hometronic.com

Motorized water-stop ball-valve 230 Vac / max. 7,5 VA
Product description: Actuator valve R3/4", DN20


HAV25

Honeywell Hometronic modules for Remote access, Security and Safety

Hometronic is the state-of-the-art Home Automation-System, it has a modular design to meet individual end-user needs such as:
Remote-access: Remote operating via phone/internet, tele-monitoring/surveillance, remote-maintenance
Security and Safety: burglary-alarm, fire-/gas detection, presence simulation, waterleakage detection and alarm-messages
The functionality of the system depends on the installed modules and its configuration. Due to the modular system architecture Hometronic can be configured and upgraded according to individual customer requirements.
Application information: For further application information, please visit: http://www.hometronic.com

Motorized water-stop ball-valve 230 Vac / max. 7,5 VA
Product description: Actuator valve R1", DN25


HAV32

Honeywell Hometronic modules for Remote access, Security and Safety

Hometronic is the state-of-the-art Home Automation-System, it has a modular design to meet individual end-user needs such as:
Remote-access: Remote operating via phone/internet, tele-monitoring/surveillance, remote-maintenance
Security and Safety: burglary-alarm, fire-/gas detection, presence simulation, waterleakage detection and alarm-messages
The functionality of the system depends on the installed modules and its configuration. Due to the modular system architecture Hometronic can be configured and upgraded according to individual customer requirements.
Application information: For further application information, please visit: http://www.hometronic.com

Motorized water-stop ball-valve 230 Vac / max. 7,5 VA
Product description: Actuator valve R1 1/4", DN32


HB85

Honeywell Hometronic modules for Convenience

Hometronic is the state-of-the-art Home Automation-System, it has a modular design to meet individual end-user needs for Convenience, like: light-, shading-, cooling-, appliance-control and water-control.
The functionality of the system depends on the installed modules and its configuration. Due to the modular system architecture Hometronic can be configured and upgraded according to individual customer requirements.
Application information: For further application information, please visit: http://www.hometronic.com

Convenience RF-modules
Product description: Sunsensor: RF-sensor-module for sun-intensity and outdoor temperature


HB95

Honeywell Hometronic modules for Convenience

Hometronic is the state-of-the-art Home Automation-System, it has a modular design to meet individual end-user needs for Convenience, like: light-, shading-, cooling-, appliance-control and water-control.
The functionality of the system depends on the installed modules and its configuration. Due to the modular system architecture Hometronic can be configured and upgraded according to individual customer requirements.
Application information: For further application information, please visit: http://www.hometronic.com

Convenience RF-modules
Product description: Sunsensor: RF-sensor-module for sun-intensity and outdoor temperature + Wind sensor


HCA1VEL

Honeywell Electronic radiator controller, HR40 HR40F HR10F
Valve adapters for HR40

Vaillant



HCE40

Honeywell Zone control system HCE40

Zone controller for underfloor heating and radiator applications, 1..5 zones. Each zone has its own control parameters. Time programming can be done externally with HCU23. One unit can be applied for all zones. With more HCU23 modules, each zone has its own time schedules.
2 push button operation
configuration switch for thermoactuators normally open/closed
error display via blinking zone LED
status display for valve open = green zone LED on
in combination with HCM100 15 time programs possible
including connection cable and plug for 230 V power supply
Control software: self learning fuzzy logic room temperature control
Hardware inputs: 5 inputs for any combination of sensor/setpointselector HCW23, or sensor/setpointselector/timeprogramming-unit HCU23
heating/cooling switch over contact
Hardware outputs: 5 outputs for max. 10 actuators MT4
1 output for pump relay HREL1
analog boiler feedback signal for setpoint control adjustment
Bus system description: RS485 bus for up to 3 zone controllers
Mounting: DIN-rail or wall
Type of terminals: removable connectors with screw terminals
Power supply: 230Vac


HCI300

Honeywell Hometronic modules for Remote access, Security and Safety

Hometronic is the state-of-the-art Home Automation-System, it has a modular design to meet individual end-user needs such as:
Remote-access: Remote operating via phone/internet, tele-monitoring/surveillance, remote-maintenance
Security and Safety: burglary-alarm, fire-/gas detection, presence simulation, waterleakage detection and alarm-messages
The functionality of the system depends on the installed modules and its configuration. Due to the modular system architecture Hometronic can be configured and upgraded according to individual customer requirements.
Application information: For further application information, please visit: http://www.hometronic.com

RF-modules
Product description: Telephone/internet module: for Remote-access via telephone/mobile/internet, with RF-communication to HCM200D-xx


HCM100

Honeywell Zone control system HCE40
Operating panel

Central operating panel for 1..3 HCE40, with 15 time/temperature zones



HCM200D-UK

Honeywell Hometronic Manager HCM200

Hometronic Manager with tested radio technology (according to ETS 300220) for central control and operation of the room temperature, light, household appliances and roller shutters of a residential unit. The integrated transmitter and receiver enable electronic consumption metering devices, e.g. from Kundo, to be connected. An adequate number of room addresses are available for temperature, light, household appliances, roller shutters/venetian blinds and consumption metering. Daily, weekly, vacation and lifestyle programs can be set for each room individually by a simple procedure using the press-and-turn knob. The lifestyle buttons also allow the user to define certain control sequences in addition to the timer programs. The temperatures, switching states, light and roller shutter position in the rooms (zones) can thus be adapted to suit recurring situations, such as parties, vacation, returning home, etc. An additional ECO energy-saving button allows you to lower the comfortable temperature in the whole apartment uniformly by, for example, one or two degrees. A further button lets you switch off automatic operation. This causes the manually set positions to be retained until you switch back to automatic mode by pressing the button again. Ideally the Hometronic Manager should be installed in a central position in the apartment, such as the entrance hall, lobby or living room.


HCU23

Honeywell Zone control system HCE40
Sensors

Remote adjustment module with room sensor and time program



HCW23

Honeywell Zone control system HCE40
Sensors

Remote adjustment module with room temperature sensor



HMAC /TAIL

Honeywell Trend Heat Meter
Accessories

R 1/2 external thread (M10x1 sensor thread) adapter for connection of temperature sensor



HMAC /VALVE/15

Honeywell Trend Heat Meter
Accessories

G 1/2 internal thread ball valve with connection for temperature sensor



HMAC /VALVE/20

Honeywell Trend Heat Meter
Accessories

G 3/4 internal thread ball valve with connection for temperature sensor



HMAC/POCKET 35MM

Honeywell Trend Heat Meter
Accessories

Pocket for HMM sensor. 35mm length.



HMAC/POCKET 52MM

Honeywell Trend Heat Meter
Accessories

Pocket for HMM sensor. 52mm length.



HMAC/POCKET 85MM

Honeywell Trend Heat Meter
Accessories

Pocket for HMM sensor. 85mm length.



HMF01

Honeywell Hometronic modules for Convenience
Accessories

Mounting frame for HA30, HS30, HD30



HMM/H/0.6/MOD

Honeywell Trend Heat Meter

The Trend HMM Series Mechanical Heat Meters are static compact energy meters with electronic measurement. Each meter consists of an electronic energy integrator with temperature sensors and a mechanical volume measuring component. HMM meters provide metering of heating and/or cooling energy in hydronic systems based on volume, and supply and return temperatures. HMM/H models are for energy metering of heating systems, ../HC models are for cooling or heat/cool systems. Used in conjunction with an RS232 and Mbus convertor and a Trend IQ3/XNC M-Bus driver, the meters data can be accessed over the Trend network.
The features include:
Electronic sensor control for recording flow rate
Available in nominal flow rates from 0.6 to 2.5 m3/h
DN15 and DN20 meter versions with direct electronic impeller scanning
10 year battery life
Primary interface: M-Bus interface to EN1434-3
Optical ZVEI interface to IEC 870-5
Adjustable reading date for billing
Windows-based HYDRO-SET software for optimum adaption to user-specific requirements
Power source: 3V(lithium battery)
Display: LCD, 7-digit, (MWh, kWh, GJ, MJ, kW, m3/h, l/h, m3, l)
Product Type: Compact heat meter to EN 1434
Max. operating pressure: 16bar
Interface: M-Bus

Mechanical Heat Meters (heating only)
Nominal flow (qp): 0.6m3/h
DN size: 15mm
Length: 110mm
Port diameter: G 3/4 Binch


HMM/H/1.5/MOD

Honeywell Trend Heat Meter

The Trend HMM Series Mechanical Heat Meters are static compact energy meters with electronic measurement. Each meter consists of an electronic energy integrator with temperature sensors and a mechanical volume measuring component. HMM meters provide metering of heating and/or cooling energy in hydronic systems based on volume, and supply and return temperatures. HMM/H models are for energy metering of heating systems, ../HC models are for cooling or heat/cool systems. Used in conjunction with an RS232 and Mbus convertor and a Trend IQ3/XNC M-Bus driver, the meters data can be accessed over the Trend network.
The features include:
Electronic sensor control for recording flow rate
Available in nominal flow rates from 0.6 to 2.5 m3/h
DN15 and DN20 meter versions with direct electronic impeller scanning
10 year battery life
Primary interface: M-Bus interface to EN1434-3
Optical ZVEI interface to IEC 870-5
Adjustable reading date for billing
Windows-based HYDRO-SET software for optimum adaption to user-specific requirements
Power source: 3V(lithium battery)
Display: LCD, 7-digit, (MWh, kWh, GJ, MJ, kW, m3/h, l/h, m3, l)
Product Type: Compact heat meter to EN 1434
Max. operating pressure: 16bar
Interface: M-Bus

Mechanical Heat Meters (heating only)
Nominal flow (qp): 1.5m3/h
DN size: 15mm
Length: 110mm
Port diameter: G 3/4 Binch


HMM/H/2.5/MOD

Honeywell Trend Heat Meter

The Trend HMM Series Mechanical Heat Meters are static compact energy meters with electronic measurement. Each meter consists of an electronic energy integrator with temperature sensors and a mechanical volume measuring component. HMM meters provide metering of heating and/or cooling energy in hydronic systems based on volume, and supply and return temperatures. HMM/H models are for energy metering of heating systems, ../HC models are for cooling or heat/cool systems. Used in conjunction with an RS232 and Mbus convertor and a Trend IQ3/XNC M-Bus driver, the meters data can be accessed over the Trend network.
The features include:
Electronic sensor control for recording flow rate
Available in nominal flow rates from 0.6 to 2.5 m3/h
DN15 and DN20 meter versions with direct electronic impeller scanning
10 year battery life
Primary interface: M-Bus interface to EN1434-3
Optical ZVEI interface to IEC 870-5
Adjustable reading date for billing
Windows-based HYDRO-SET software for optimum adaption to user-specific requirements
Power source: 3V(lithium battery)
Display: LCD, 7-digit, (MWh, kWh, GJ, MJ, kW, m3/h, l/h, m3, l)
Product Type: Compact heat meter to EN 1434
Max. operating pressure: 16bar
Interface: M-Bus

Mechanical Heat Meters (heating only)
Nominal flow (qp): 2.5m3/h
DN size: 20mm
Length: 130mm
Port diameter: G 1 Binch


HMM/HC/0.6/MOD

Honeywell Trend Heat Meter

The Trend HMM Series Mechanical Heat Meters are static compact energy meters with electronic measurement. Each meter consists of an electronic energy integrator with temperature sensors and a mechanical volume measuring component. HMM meters provide metering of heating and/or cooling energy in hydronic systems based on volume, and supply and return temperatures. HMM/H models are for energy metering of heating systems, ../HC models are for cooling or heat/cool systems. Used in conjunction with an RS232 and Mbus convertor and a Trend IQ3/XNC M-Bus driver, the meters data can be accessed over the Trend network.
The features include:
Electronic sensor control for recording flow rate
Available in nominal flow rates from 0.6 to 2.5 m3/h
DN15 and DN20 meter versions with direct electronic impeller scanning
10 year battery life
Primary interface: M-Bus interface to EN1434-3
Optical ZVEI interface to IEC 870-5
Adjustable reading date for billing
Windows-based HYDRO-SET software for optimum adaption to user-specific requirements
Power source: 3V(lithium battery)
Display: LCD, 7-digit, (MWh, kWh, GJ, MJ, kW, m3/h, l/h, m3, l)
Product Type: Compact heat meter to EN 1434
Max. operating pressure: 16bar
Interface: M-Bus

Mechanical Heat Meters (heating and cooling)
Nominal flow (qp): 0.6m3/h
DN size: 15mm
Length: 110mm
Port diameter: G 3/4 Binch


HMM/HC/1.5/MOD

Honeywell Trend Heat Meter

The Trend HMM Series Mechanical Heat Meters are static compact energy meters with electronic measurement. Each meter consists of an electronic energy integrator with temperature sensors and a mechanical volume measuring component. HMM meters provide metering of heating and/or cooling energy in hydronic systems based on volume, and supply and return temperatures. HMM/H models are for energy metering of heating systems, ../HC models are for cooling or heat/cool systems. Used in conjunction with an RS232 and Mbus convertor and a Trend IQ3/XNC M-Bus driver, the meters data can be accessed over the Trend network.
The features include:
Electronic sensor control for recording flow rate
Available in nominal flow rates from 0.6 to 2.5 m3/h
DN15 and DN20 meter versions with direct electronic impeller scanning
10 year battery life
Primary interface: M-Bus interface to EN1434-3
Optical ZVEI interface to IEC 870-5
Adjustable reading date for billing
Windows-based HYDRO-SET software for optimum adaption to user-specific requirements
Power source: 3V(lithium battery)
Display: LCD, 7-digit, (MWh, kWh, GJ, MJ, kW, m3/h, l/h, m3, l)
Product Type: Compact heat meter to EN 1434
Max. operating pressure: 16bar
Interface: M-Bus

Mechanical Heat Meters (heating and cooling)
Nominal flow (qp): 1.5m3/h
DN size: 15mm
Length: 110mm
Port diameter: G 3/4 Binch


HMM/HC/2.5/MOD

Honeywell Trend Heat Meter

The Trend HMM Series Mechanical Heat Meters are static compact energy meters with electronic measurement. Each meter consists of an electronic energy integrator with temperature sensors and a mechanical volume measuring component. HMM meters provide metering of heating and/or cooling energy in hydronic systems based on volume, and supply and return temperatures. HMM/H models are for energy metering of heating systems, ../HC models are for cooling or heat/cool systems. Used in conjunction with an RS232 and Mbus convertor and a Trend IQ3/XNC M-Bus driver, the meters data can be accessed over the Trend network.
The features include:
Electronic sensor control for recording flow rate
Available in nominal flow rates from 0.6 to 2.5 m3/h
DN15 and DN20 meter versions with direct electronic impeller scanning
10 year battery life
Primary interface: M-Bus interface to EN1434-3
Optical ZVEI interface to IEC 870-5
Adjustable reading date for billing
Windows-based HYDRO-SET software for optimum adaption to user-specific requirements
Power source: 3V(lithium battery)
Display: LCD, 7-digit, (MWh, kWh, GJ, MJ, kW, m3/h, l/h, m3, l)
Product Type: Compact heat meter to EN 1434
Max. operating pressure: 16bar
Interface: M-Bus

Mechanical Heat Meters (heating and cooling)
Nominal flow (qp): 2.5m3/h
DN size: 20mm
Length: 130mm
Port diameter: G 1 Binch


HP970A1009/U

Honeywell Pneumatic room humidity controller, HP970

Two-pipe, single setpoint, pneumatic humidistat used to provide proportional control of pneumatic valves on humidification or dehumidification systems.
Branch Line Pressure range: 21...105kPa
Throttling range: adjustable 3..15%rh
Max. safe air pressure: 170kPa
Mounting: wall
R.H. setpoint range: 15...75%rh


Action: direct acting


HP970B1007/U

Honeywell Pneumatic room humidity controller, HP970

Two-pipe, single setpoint, pneumatic humidistat used to provide proportional control of pneumatic valves on humidification or dehumidification systems.
Branch Line Pressure range: 21...105kPa
Throttling range: adjustable 3..15%rh
Max. safe air pressure: 170kPa
Mounting: wall
R.H. setpoint range: 15...75%rh


Action: reverse acting


HR10F

Honeywell Electronic radiator controller, HR40 HR40F HR10F

Less heating cost and more comfort with Roomtronic HR40 from Honeywell. The HR40 is an electronic radiator controller with a series of convenient functions. It heats any room as long as required by using intelligent control algorithm and time program.
The HR40 radiator controller can be fitted with ease to any conventional radiator valve. For most of the conventional valves an adapter is not required (Honeywell, Braukmann, MNG, Heimeier, Junkers, Landis & Gyr, Duogyr). The HR40 is adapting itself automatically.
Control functions: an individual time program allows to set your own heating time program and setpoints for each day of the week, self-monitoring functions offer protection against valve plock and frost; it helps you to save energy or tell you that the batteries need to be changed
Time program: the HR40 changes between 2 setpoint temperatures in terms of comfort temperature and economy temperature based on time program, the time program is free programmable to setup your individual daily program respective weekly program
Approvals: meets CE standard
Temp. setpoint range: 8...28C
Temperature element: NTC20k
Temp. element place: built in
Frost protection temperature: 6C
Shut-off facility: yes
Stroke: 3.2mm
Batteries: included 2 x AA
Housing (HxWxD): 80mm|50mm|105mm

Controller including wall module
Product description: Electronic radiator controller, existing of wall module with sensor and operation, and an actuator for the radiator valve, with 10 meter cable


HR40

Honeywell Electronic radiator controller, HR40 HR40F HR10F

Less heating cost and more comfort with Roomtronic HR40 from Honeywell. The HR40 is an electronic radiator controller with a series of convenient functions. It heats any room as long as required by using intelligent control algorithm and time program.
The HR40 radiator controller can be fitted with ease to any conventional radiator valve. For most of the conventional valves an adapter is not required (Honeywell, Braukmann, MNG, Heimeier, Junkers, Landis & Gyr, Duogyr). The HR40 is adapting itself automatically.
Control functions: an individual time program allows to set your own heating time program and setpoints for each day of the week, self-monitoring functions offer protection against valve plock and frost; it helps you to save energy or tell you that the batteries need to be changed
Time program: the HR40 changes between 2 setpoint temperatures in terms of comfort temperature and economy temperature based on time program, the time program is free programmable to setup your individual daily program respective weekly program
Approvals: meets CE standard
Temp. setpoint range: 8...28C
Temperature element: NTC20k
Temp. element place: built in
Frost protection temperature: 6C
Shut-off facility: yes
Stroke: 3.2mm
Batteries: included 2 x AA
Housing (HxWxD): 80mm|50mm|105mm

Controller
Product description: Electronic radiator controller


HR40F

Honeywell Electronic radiator controller, HR40 HR40F HR10F

Less heating cost and more comfort with Roomtronic HR40 from Honeywell. The HR40 is an electronic radiator controller with a series of convenient functions. It heats any room as long as required by using intelligent control algorithm and time program.
The HR40 radiator controller can be fitted with ease to any conventional radiator valve. For most of the conventional valves an adapter is not required (Honeywell, Braukmann, MNG, Heimeier, Junkers, Landis & Gyr, Duogyr). The HR40 is adapting itself automatically.
Control functions: an individual time program allows to set your own heating time program and setpoints for each day of the week, self-monitoring functions offer protection against valve plock and frost; it helps you to save energy or tell you that the batteries need to be changed
Time program: the HR40 changes between 2 setpoint temperatures in terms of comfort temperature and economy temperature based on time program, the time program is free programmable to setup your individual daily program respective weekly program
Approvals: meets CE standard
Temp. setpoint range: 8...28C
Temperature element: NTC20k
Temp. element place: built in
Frost protection temperature: 6C
Shut-off facility: yes
Stroke: 3.2mm
Batteries: included 2 x AA
Housing (HxWxD): 80mm|50mm|105mm

Controller including wall module
Product description: Electronic radiator controller, existing of wall module with sensor and operation, and an actuator for the radiator valve, with 5 meter cable


HREL1

Honeywell Zone control system HCE40
Accessories

Pump relay



HS20-D

Honeywell Hometronic modules for Convenience

Hometronic is the state-of-the-art Home Automation-System, it has a modular design to meet individual end-user needs for Convenience, like: light-, shading-, cooling-, appliance-control and water-control.
The functionality of the system depends on the installed modules and its configuration. Due to the modular system architecture Hometronic can be configured and upgraded according to individual customer requirements.
Application information: For further application information, please visit: http://www.hometronic.com

Convenience RF-modules
Product description: Plug-in switch (for German Schuko-plug): RF-module for controlling of appliances (max. 16 A / 230 Vac)


HS30

Honeywell Hometronic modules for Convenience

Hometronic is the state-of-the-art Home Automation-System, it has a modular design to meet individual end-user needs for Convenience, like: light-, shading-, cooling-, appliance-control and water-control.
The functionality of the system depends on the installed modules and its configuration. Due to the modular system architecture Hometronic can be configured and upgraded according to individual customer requirements.
Application information: For further application information, please visit: http://www.hometronic.com

Convenience RF-modules
Product description: Switch module: RF-wall-module for switching appliances (max. 10 A / 230 Vac)


HS90

Honeywell Dewpoint Hygrostat, HS90

The HS90 dewpoint hygrostat measures the relative humidity near the dewpoint using its high-quality capacitive sensor. The relay output will switch as the RH reaches 90%. It can be used in chilled ceiling, heating, ventilating, and air conditioning applications.
An additional status light indicates the condensation danger. Thanks to the special protection coating, the sensor and its electronics exhibit low susceptibility to dust and dirt. The HS90 can be mounted on walls, ducts and pipes up to 2" (50 mm).
R.H. range: 0...100%rh
Mounting place: strap on pipe
early detection of condensation danger
compact design
fast response time
dust protection
simple and easy mounting
status indication
Output signal: volt free contact
R.H. hysteresis switching point: 90 +/-5%rh


HU01

Honeywell Electronic radiator controller, HR40 HR40F HR10F
Valve adapters for HR40

Oventrop



HU02

Honeywell Electronic radiator controller, HR40 HR40F HR10F
Valve adapters for HR40

Herz HR



HWS40

Honeywell Hometronic modules for Convenience

Hometronic is the state-of-the-art Home Automation-System, it has a modular design to meet individual end-user needs for Convenience, like: light-, shading-, cooling-, appliance-control and water-control.
The functionality of the system depends on the installed modules and its configuration. Due to the modular system architecture Hometronic can be configured and upgraded according to individual customer requirements.
Application information: For further application information, please visit: http://www.hometronic.com

Convenience RF-modules
Product description: Windsensor add-on set for HA30: Wired -sensor-module for wind-detection for security-related applications (e.g. sunblinds)


HX85

Honeywell Hometronic modules for Remote access, Security and Safety

Hometronic is the state-of-the-art Home Automation-System, it has a modular design to meet individual end-user needs such as:
Remote-access: Remote operating via phone/internet, tele-monitoring/surveillance, remote-maintenance
Security and Safety: burglary-alarm, fire-/gas detection, presence simulation, waterleakage detection and alarm-messages
The functionality of the system depends on the installed modules and its configuration. Due to the modular system architecture Hometronic can be configured and upgraded according to individual customer requirements.
Application information: For further application information, please visit: http://www.hometronic.com

RF-modules
Product description: Security module: RF-based module with 5 (security-)inputs for integration with any security-system and/or external sensors (leakage, gas, etc.), desired lifestyle-activation programmable


IIM

Honeywell Input Modules, 4DIX 4SIM IIM

The Digital Input Expander allows 4 volt free inputs to be monitored by a single analogue input channel. The resultant analogue value can be decoded by the A to D Function Module in an IQ controller to produce internal digital status bits for alarm monitoring or other status input applications. A pin header allows quick connection to a 4SIM which provides switched mains voltage isolation for applications where volt free contacts are not available.
The Four Switched Input Isolation Module converts 4 separate, 240Vac/ 110Vac inputs, (or 24 Vac/dc inputs) to fully isolated logic outputs. Three output configurations are possible: 1) Four separate outputs for connection to IQ controller digital inputs. 2) Any of the 4 inputs can be link selected via logical "OR" function to a common output for a connection to a single IQ controller digital input. 3) A pin header and ribbon cable allows quick connection to a 4DIX module which enables the 4 inputs to be monitored by a single analogue input channel on a IQ controller.
The Input Isolation Module (IIM) provides DC isolation from ground for externally powered sensors with either 4-20mA or 0-5V output
Standard DIN rail mounting.
Rising cage clamp terminals.


Product description: Input Isolation Module


ILA1

Honeywell Analog control module, IRC, R7454A


Adapter with 0..10Vdc input signal for heating elements, 24Vdc,50mA



IMC-101-M-SC

Honeywell Ethernet Internetwork Node Controller (EINC)

The EINC, Ethernet Internetwork Node Controller, provides the means by which the Building Management System network can incorporate an Ethernet network. The EINC operates at the internetwork level, including the necessary support for WANs (e.g. TMN support). It also provides virtual CNCs which allow supervisory or tool software running in PCs connected to the Ethernet network to connect to the BMS system.
The EDS-205 and EDS-305-M-SC are industrial 5-port Ethernet switch that supports IEE 820.3/820.3u/820.3x with 10/100M, full half duplex, MDI/MDIX autosensing RJ45 ports. The EDS-305-M-SC also has a built in relay warning function which alerts maintainers when power failures or port breaks occur and is equipped with 4 10/100T(X) ports and 1 single mode 100baseFX port, SC connector. Both devices operate over a wide temperature range and are DIN rail mounting, making them ideal for most industrial environments.
The IMC-101-M-SC,which has been designed for stable operation in industrial environments, provides conversion between 10/100BaseT(X) and 100 BaseFX. It rated to operate at temperature ranging from 0 - 60oC, and is DIN rail mounting, making it ideal for most industrial environments.

Other Ethernet devices
Model: Ethernet Converter
Network: TCP/IP
Power: 24Vac/dc
Comments: IP30


INC2

Honeywell Trend LAN Communication Nodes Controller CNC2, INC2

The Communications Node Controller (CNC2) interfaces between a Trend Supervisor or Software Tool and the Trend network (RS232 to Lan).
The Internetwork Node Controller (INC2) allows Lans to be interconnected to create very large networks. Up to 116 INC2s can be connected to the internetwork. An INC2 may have up to 116 devices on its Lan.
The LNC2 Lancard Node Controller is a PCI bus card that interfaces between a Trend Supervisor or Software Tool and the Trend network.
Trend Node cards (CNC/INC) available in an IP30 enclosure (NBOX) or can be supplied without an enclosure for mounting inside a Trend device, e.g. an IQ controller. There are 230 V and 24 V supply versions. Boxed battery backed versions are available (230 Vac only) and an optional metal enclosure with cable glanding knockouts is also available.
Network: Trend LAN

INC (Internetwork Node Controller)
Model: Internetwork Node Controller
Power: 24Vdc
Comments: no


IQ211/UNB/24V

Honeywell IQ21x Controllers

The IQ21x series of intelligent controllers are designed for use as unitary controllers in building control systems. Full compatibility with other Trend IQ controllers enables the IQ21x to integrate the local environmental needs with the bulk air conditioning system in order to optimise both comfort and running costs.
Network: Trend LAN
UI: 1
AI: 2
DI: 2
Comments: analogue input: thermistor only

Controllers
AO: no
Triac: 6
Power: 230Vac


IQ212/UNB/24VAC

Honeywell IQ21x Controllers

The IQ21x series of intelligent controllers are designed for use as unitary controllers in building control systems. Full compatibility with other Trend IQ controllers enables the IQ21x to integrate the local environmental needs with the bulk air conditioning system in order to optimise both comfort and running costs.
Network: Trend LAN
UI: 1
AI: 2
DI: 2
Comments: analogue input: thermistor only

Controllers
AO: 2
Triac: 4
Power: 24Vac


IQ221/UNB/230

Honeywell IQ22x Controllers

Medium size controller with extremely versatile I/O capability suitable for a broad range of applications, especially in the area of dedicated controls (e.g. air handling units, terminal units, chillers). Various I/O configurations available, ranging from 8 points to 20 points.
Network: Trend LAN

Controllers
UI: 6
DI: no
AO: 2
DO: 5
Power: 230Vac


IQ221/UNB/24V

Honeywell IQ22x Controllers

Medium size controller with extremely versatile I/O capability suitable for a broad range of applications, especially in the area of dedicated controls (e.g. air handling units, terminal units, chillers). Various I/O configurations available, ranging from 8 points to 20 points.
Network: Trend LAN

Controllers
UI: 6
DI: no
AO: 2
DO: 5
Power: 24Vac/dc


IQ223/UNB/230

Honeywell IQ22x Controllers

Medium size controller with extremely versatile I/O capability suitable for a broad range of applications, especially in the area of dedicated controls (e.g. air handling units, terminal units, chillers). Various I/O configurations available, ranging from 8 points to 20 points.
Network: Trend LAN

Controllers
UI: 7
DI: 1
AO: 7
DO: 1
Power: 230Vac


IQ223/UNB/24V

Honeywell IQ22x Controllers

Medium size controller with extremely versatile I/O capability suitable for a broad range of applications, especially in the area of dedicated controls (e.g. air handling units, terminal units, chillers). Various I/O configurations available, ranging from 8 points to 20 points.
Network: Trend LAN

Controllers
UI: 7
DI: 1
AO: 7
DO: 1
Power: 24Vac/dc


IQ228/UNB/230

Honeywell IQ22x Controllers

Medium size controller with extremely versatile I/O capability suitable for a broad range of applications, especially in the area of dedicated controls (e.g. air handling units, terminal units, chillers). Various I/O configurations available, ranging from 8 points to 20 points.
Network: Trend LAN

Controllers
UI: 7
DI: 1
AO: no
DO: no
Power: 230Vac


IQ228/UNB/24V

Honeywell IQ22x Controllers

Medium size controller with extremely versatile I/O capability suitable for a broad range of applications, especially in the area of dedicated controls (e.g. air handling units, terminal units, chillers). Various I/O configurations available, ranging from 8 points to 20 points.
Network: Trend LAN

Controllers
UI: 7
DI: 1
AO: no
DO: no
Power: 24Vac/dc


IQ229/UNB/230

Honeywell IQ22x Controllers

Medium size controller with extremely versatile I/O capability suitable for a broad range of applications, especially in the area of dedicated controls (e.g. air handling units, terminal units, chillers). Various I/O configurations available, ranging from 8 points to 20 points.
Network: Trend LAN

Controllers
UI: 7
DI: 1
AO: 7
DO: 5
Power: 230Vac


IQ229/UNB/24V

Honeywell IQ22x Controllers

Medium size controller with extremely versatile I/O capability suitable for a broad range of applications, especially in the area of dedicated controls (e.g. air handling units, terminal units, chillers). Various I/O configurations available, ranging from 8 points to 20 points.
Network: Trend LAN

Controllers
UI: 7
DI: 1
AO: 7
DO: 5
Power: 24Vac/dc


IQ233/UNB/230

Honeywell IQ233 Controller

The IQ233 mid range controller is specifically designed for field replacement of the older IQ131 (131+) controllers. It is also useful in new installations, for a broad range of applications. The IQ233 has 32 IO points. Options are available for integral node cards.
Order example: IQ233/TMNH/UK/230
Network: Trend LAN
Power: 230Vac
UI: 20
AO: 12


IQ246/UNB/24VAC

Honeywell IQ246 Controllers

The IQ246 is designed to provide a small footprint with a relatively high capacity of inputs and outputs and can be used for the control of all types of building plant. Pre-fitting the controller bracket enable the plant and supplies to be wired in advance, and the controller to be plugged in for commissioning. D-type connectors are provided for the inputs and outputs enabling multi-core cabling to bespoke terminal layouts. The IQ246 can provide up to 32 digital inputs, 20 analogue inputs and 20 voltage outputs. All analogue inputs can be individually link-configured for voltage current or thermistor signals. It can operate either as a stand-alone device or as a part of a Building Management System.
Network: Trend LAN
AI: 20
DI: 32
AO: 20

Controllers
Power: 24Vac


IQ246/UNB/24VDC

Honeywell IQ246 Controllers

The IQ246 is designed to provide a small footprint with a relatively high capacity of inputs and outputs and can be used for the control of all types of building plant. Pre-fitting the controller bracket enable the plant and supplies to be wired in advance, and the controller to be plugged in for commissioning. D-type connectors are provided for the inputs and outputs enabling multi-core cabling to bespoke terminal layouts. The IQ246 can provide up to 32 digital inputs, 20 analogue inputs and 20 voltage outputs. All analogue inputs can be individually link-configured for voltage current or thermistor signals. It can operate either as a stand-alone device or as a part of a Building Management System.
Network: Trend LAN
AI: 20
DI: 32
AO: 20

Controllers
Power: 24Vdc


IQ251/UNB/230

Honeywell IQ251 Controllers

The IQ251 is a large capacity controller designed for the control of all types of building plant. It can provide up to 128 I/O points by connecting 8 I/O modules in any combination. IQ system accessory modules may be connected to the input/output channels to provide greater I/O flexibility. They enable the IQ251 to provide sufficient capability for more complex strategies. It can operate either as a stand alone device or as part of a Building Management System.
Order example: IQ251/comms/voltage e.g. IQ251/TMNH/UK/230. I/O cards must be ordered separately
Network: Trend LAN

Controllers
AI: no
DI: no
AO: no
DO: no
Comments: up to 8 cards
Power: 230Vac


IQ251/UNB/24VAC

Honeywell IQ251 Controllers

The IQ251 is a large capacity controller designed for the control of all types of building plant. It can provide up to 128 I/O points by connecting 8 I/O modules in any combination. IQ system accessory modules may be connected to the input/output channels to provide greater I/O flexibility. They enable the IQ251 to provide sufficient capability for more complex strategies. It can operate either as a stand alone device or as part of a Building Management System.
Order example: IQ251/comms/voltage e.g. IQ251/TMNH/UK/230. I/O cards must be ordered separately
Network: Trend LAN

Controllers
AI: no
DI: no
AO: no
DO: no
Comments: up to 8 cards
Power: 24Vac


IQ251/UNB/24VDC

Honeywell IQ251 Controllers

The IQ251 is a large capacity controller designed for the control of all types of building plant. It can provide up to 128 I/O points by connecting 8 I/O modules in any combination. IQ system accessory modules may be connected to the input/output channels to provide greater I/O flexibility. They enable the IQ251 to provide sufficient capability for more complex strategies. It can operate either as a stand alone device or as part of a Building Management System.
Order example: IQ251/comms/voltage e.g. IQ251/TMNH/UK/230. I/O cards must be ordered separately
Network: Trend LAN

Controllers
AI: no
DI: no
AO: no
DO: no
Comments: up to 8 cards
Power: 24Vdc


IQ3/XNC-DRIVERS

Honeywell IQ3 Integration Controllers
Accessories

Drivers for M-Bus and ModBus (free download from www.trendcontrols.com)



IQ3XACT/12/100-240

Honeywell IQ3 Web Enabled Controllers

The IQ3 controllers are Building Management System controllers that use Ethernet and TCP/IP networking technologies. Each controller incorporates a web server which can deliver user-specific web pages to a PC or mobile device running internet browser software. If a system is set up with the correct connections, a user with the appropriate security codes can monitor or adjust the controller from any Internet access point in the world. It is also compatible with the traditional IQ system protocol.
Network: TCP/IP
The following features are also available:
Ethernet 10 Mbps main network with TCP/IP protocol
Embedded web server with security protected monitor/control
Compatible with existing IQ system protocol
Flexible number of software strategy modules
Small footprint with DIN rail mounting

Controllers, fixed I/O
UI: 6
DI: no
TI: no
AO: 6
DO: no
DOS: no
Power: 100..240Vac


IQ3XACT/12/24

Honeywell IQ3 Web Enabled Controllers

The IQ3 controllers are Building Management System controllers that use Ethernet and TCP/IP networking technologies. Each controller incorporates a web server which can deliver user-specific web pages to a PC or mobile device running internet browser software. If a system is set up with the correct connections, a user with the appropriate security codes can monitor or adjust the controller from any Internet access point in the world. It is also compatible with the traditional IQ system protocol.
Network: TCP/IP
The following features are also available:
Ethernet 10 Mbps main network with TCP/IP protocol
Embedded web server with security protected monitor/control
Compatible with existing IQ system protocol
Flexible number of software strategy modules
Small footprint with DIN rail mounting

Controllers, fixed I/O
UI: 6
DI: no
TI: no
AO: 6
DO: no
DOS: no
Power: 24Vac/24..60Vdc


IQ3XACT/12/BAC/100-240

Honeywell IQ3 Web Enabled BACnet Controllers

The IQ3 BACnet controllers are Building Management System controllers that use BACnet protocol over Ethernet and TCP/IP networking technologies. Each controller incorporates a web server which can deliver user-specific web pages to a PC or mobile device running internet browser software. If a system is set up with the correct connections, a user with the appropriate security codes can monitor or adjust the controller from any Internet access point in the world. It is also compatible with the traditional IQ system protocol.
Network: TCP/IP
The following features are also available:
Ethernet 10 Mbps main network with TCP/IP protocol
Embedded web server with security protected monitor/control
BACnet over IP
Compatible with existing IQ system protocol
I/O bus allows separate placement of I/O modules
Flexible number of software strategy modules
Small footprint with DIN rail mounting

Controllers, fixed I/O
UI: 6
DI: no
TI: no
AO: 6
DO: no
DOS: no
Power: 100..240Vac


IQ3XACT/12/BAC/24

Honeywell IQ3 Web Enabled BACnet Controllers

The IQ3 BACnet controllers are Building Management System controllers that use BACnet protocol over Ethernet and TCP/IP networking technologies. Each controller incorporates a web server which can deliver user-specific web pages to a PC or mobile device running internet browser software. If a system is set up with the correct connections, a user with the appropriate security codes can monitor or adjust the controller from any Internet access point in the world. It is also compatible with the traditional IQ system protocol.
Network: TCP/IP
The following features are also available:
Ethernet 10 Mbps main network with TCP/IP protocol
Embedded web server with security protected monitor/control
BACnet over IP
Compatible with existing IQ system protocol
I/O bus allows separate placement of I/O modules
Flexible number of software strategy modules
Small footprint with DIN rail mounting

Controllers, fixed I/O
UI: 6
DI: no
TI: no
AO: 6
DO: no
DOS: no
Power: 24Vac/24..60Vdc


IQ3XACT/12/LAN/100-240

Honeywell IQ3 Trend LAN Controllers

The IQ3 Trend LAN controllers maintain all of the features of the IQ3XCITE range, however they use the Trend proprietary LAN for backward compatibility with IQ2 controllers. Each controller still incorporates a web server which, if Ethernet is connected, can deliver user specific web pages to a PC or mobile device running internet browser software. If a system is set up with the correct connections, a user with the appropriate security codes can monitor or adjust the controller from any Internet access point in the world.
Network: Trend LAN
Trend Proprietary LAN main network for Backward compatibility to IQ2 controllers
Embedded web server
Security protected monitor/control via web browser
Compatible with existing IQ system protocol
Small footprint with DIN rail mounting

Controllers, fixed I/O
UI: 6
DI: no
TI: no
AO: 6
DO: no
DOS: no
Power: 100..240Vac


IQ3XACT/12/LAN/24

Honeywell IQ3 Trend LAN Controllers

The IQ3 Trend LAN controllers maintain all of the features of the IQ3XCITE range, however they use the Trend proprietary LAN for backward compatibility with IQ2 controllers. Each controller still incorporates a web server which, if Ethernet is connected, can deliver user specific web pages to a PC or mobile device running internet browser software. If a system is set up with the correct connections, a user with the appropriate security codes can monitor or adjust the controller from any Internet access point in the world.
Network: Trend LAN
Trend Proprietary LAN main network for Backward compatibility to IQ2 controllers
Embedded web server
Security protected monitor/control via web browser
Compatible with existing IQ system protocol
Small footprint with DIN rail mounting

Controllers, fixed I/O
UI: 6
DI: no
TI: no
AO: 6
DO: no
DOS: no
Power: 24Vac/24..60Vdc


IQ3XACT/12/LAN/BAC/100-240

Honeywell IQ3 Trend LAN BACnet Controllers

The IQ3 Trend Lan BACnet controllers are Building Management System controllers that are compatible with the traditional IQ system protocol over the Trend LAN and use BACnet protocol over Ethernet and TCP/IP networking technologies. Each controller incorporates a web server which can deliver user-specific web pages to a PC or mobile device running internet browser software. If a system is set up with the correct connections, a user with the appropriate security codes can monitor or adjust the controller from any Internet access point in the world.
Network: Trend LAN
Features also include:
Trend Proprietary LAN main network for Backward compatibility to IQ2 controllers
Embedded web server with security protected monitor/control
BACnet over IP
I/O bus allows separate placement of I/O modules
MBus drivers (available through free download from Trend)
Modbus drivers (available through free download from Trend)
Flexible number of software strategy modules
Small footprint with DIN rail mounting

Controllers, fixed I/O
UI: 6
DI: no
TI: no
AO: 6
DO: no
DOS: no
Power: 100..240Vac


IQ3XACT/12/LAN/BAC/24

Honeywell IQ3 Trend LAN BACnet Controllers

The IQ3 Trend Lan BACnet controllers are Building Management System controllers that are compatible with the traditional IQ system protocol over the Trend LAN and use BACnet protocol over Ethernet and TCP/IP networking technologies. Each controller incorporates a web server which can deliver user-specific web pages to a PC or mobile device running internet browser software. If a system is set up with the correct connections, a user with the appropriate security codes can monitor or adjust the controller from any Internet access point in the world.
Network: Trend LAN
Features also include:
Trend Proprietary LAN main network for Backward compatibility to IQ2 controllers
Embedded web server with security protected monitor/control
BACnet over IP
I/O bus allows separate placement of I/O modules
MBus drivers (available through free download from Trend)
Modbus drivers (available through free download from Trend)
Flexible number of software strategy modules
Small footprint with DIN rail mounting

Controllers, fixed I/O
UI: 6
DI: no
TI: no
AO: 6
DO: no
DOS: no
Power: 24Vac/24..60Vdc


IQ3XACT/12/XNC/100-240

Honeywell IQ3 Integration Controllers

The IQ3../.../XNC/... provides a flexible way of interfacing the IQ system with 3rd party systems. It utilises both standard IQ configuration modules, and the Trend Custom Language (TCL) to present information from other systems as though it were from an IQ controller. It also allows parameters within the 3rd party system to be adjusted from IQ system Supervisor and Tool software. The optional serial auxiliary board (/SER/) provides an additional RS232 or RS485 (2/4 wire) (or also RS422) port for communicating with other devices.
The product also includes:
All standard IQ3 features
Modbus drivers (free download from Trend website)
MBus drivers (free download from Trend website)

Ethernet/Ethernet
UI: 6
DI: no
TI: no
AO: 6
DO: no
DOS: no
Network: TCP/IP
Integration possible with: TCP/IP
Maximum expansion: no expansion
Power: 100..240Vac


IQ3XACT/12/XNC/24

Honeywell IQ3 Integration Controllers

The IQ3../.../XNC/... provides a flexible way of interfacing the IQ system with 3rd party systems. It utilises both standard IQ configuration modules, and the Trend Custom Language (TCL) to present information from other systems as though it were from an IQ controller. It also allows parameters within the 3rd party system to be adjusted from IQ system Supervisor and Tool software. The optional serial auxiliary board (/SER/) provides an additional RS232 or RS485 (2/4 wire) (or also RS422) port for communicating with other devices.
The product also includes:
All standard IQ3 features
Modbus drivers (free download from Trend website)
MBus drivers (free download from Trend website)

Ethernet/Ethernet
UI: 6
DI: no
TI: no
AO: 6
DO: no
DOS: no
Network: TCP/IP
Integration possible with: TCP/IP
Maximum expansion: no expansion
Power: 24Vac/24..60Vdc


IQ3XACT/12/XNC/BAC/100-240

Honeywell IQ3 BACnet Integration Controllers

The IQ3../.../XNC/BAC/... provides a flexible way of interfacing the IQ system with 3rd party systems. It utilises both standard IQ configuration modules, and the Trend Custom Language (TCL) to present information from other systems as though it were from an IQ controller. It also allows parameters within the 3rd party system to be adjusted from IQ system Supervisor and Tool software. The optional serial auxiliary board (/SER/) provides an additional RS232 or RS485 (2/4 wire) (or also RS422) port for communicating with other devices.
Flexible method of interfacing with 3rd party systems
BACnet over IP
Enhanced Custom Language (TCL)
Standard IQ configuration modules
Serial auxiliary board option (RS232 or RS485(2/4 wire))
All standard IQ3 features
BACnet is a registered trademark of ASHRAE. ASHRAE does not endorse, approve or test products for compliance with ASHRAE standards. Compliance of listed products to the requirements of ASHRAE Standard 135 is the responsibility of BACnet International (BI). BTL is a registered trademark of BI.

Ethernet/Ethernet
UI: 6
DI: no
TI: no
AO: 6
DO: no
DOS: no
Network: TCP/IP
Integration possible with: TCP/IP
Maximum expansion: no expansion
Power: 100..240Vac


IQ3XACT/12/XNC/BAC/24

Honeywell IQ3 BACnet Integration Controllers

The IQ3../.../XNC/BAC/... provides a flexible way of interfacing the IQ system with 3rd party systems. It utilises both standard IQ configuration modules, and the Trend Custom Language (TCL) to present information from other systems as though it were from an IQ controller. It also allows parameters within the 3rd party system to be adjusted from IQ system Supervisor and Tool software. The optional serial auxiliary board (/SER/) provides an additional RS232 or RS485 (2/4 wire) (or also RS422) port for communicating with other devices.
Flexible method of interfacing with 3rd party systems
BACnet over IP
Enhanced Custom Language (TCL)
Standard IQ configuration modules
Serial auxiliary board option (RS232 or RS485(2/4 wire))
All standard IQ3 features
BACnet is a registered trademark of ASHRAE. ASHRAE does not endorse, approve or test products for compliance with ASHRAE standards. Compliance of listed products to the requirements of ASHRAE Standard 135 is the responsibility of BACnet International (BI). BTL is a registered trademark of BI.

Ethernet/Ethernet
UI: 6
DI: no
TI: no
AO: 6
DO: no
DOS: no
Network: TCP/IP
Integration possible with: TCP/IP
Maximum expansion: no expansion
Power: 24Vac/24..60Vdc


IQ3XACT/12/XNC/LAN/100-240

Honeywell IQ3 Integration Controllers

The IQ3../.../XNC/... provides a flexible way of interfacing the IQ system with 3rd party systems. It utilises both standard IQ configuration modules, and the Trend Custom Language (TCL) to present information from other systems as though it were from an IQ controller. It also allows parameters within the 3rd party system to be adjusted from IQ system Supervisor and Tool software. The optional serial auxiliary board (/SER/) provides an additional RS232 or RS485 (2/4 wire) (or also RS422) port for communicating with other devices.
The product also includes:
All standard IQ3 features
Modbus drivers (free download from Trend website)
MBus drivers (free download from Trend website)

Trend LAN/Ethernet
UI: 6
DI: no
TI: no
AO: 6
DO: no
DOS: no
Network: Trend LAN
Integration possible with: TCP/IP
Maximum expansion: no expansion
Power: 100..240Vac


IQ3XACT/12/XNC/LAN/24

Honeywell IQ3 Integration Controllers

The IQ3../.../XNC/... provides a flexible way of interfacing the IQ system with 3rd party systems. It utilises both standard IQ configuration modules, and the Trend Custom Language (TCL) to present information from other systems as though it were from an IQ controller. It also allows parameters within the 3rd party system to be adjusted from IQ system Supervisor and Tool software. The optional serial auxiliary board (/SER/) provides an additional RS232 or RS485 (2/4 wire) (or also RS422) port for communicating with other devices.
The product also includes:
All standard IQ3 features
Modbus drivers (free download from Trend website)
MBus drivers (free download from Trend website)

Trend LAN/Ethernet
UI: 6
DI: no
TI: no
AO: 6
DO: no
DOS: no
Network: Trend LAN
Integration possible with: TCP/IP
Maximum expansion: no expansion
Power: 24Vac/24..60Vdc


IQ3XACT/12/XNC/LAN/BAC/100-240

Honeywell IQ3 BACnet Integration Controllers

The IQ3../.../XNC/BAC/... provides a flexible way of interfacing the IQ system with 3rd party systems. It utilises both standard IQ configuration modules, and the Trend Custom Language (TCL) to present information from other systems as though it were from an IQ controller. It also allows parameters within the 3rd party system to be adjusted from IQ system Supervisor and Tool software. The optional serial auxiliary board (/SER/) provides an additional RS232 or RS485 (2/4 wire) (or also RS422) port for communicating with other devices.
Flexible method of interfacing with 3rd party systems
BACnet over IP
Enhanced Custom Language (TCL)
Standard IQ configuration modules
Serial auxiliary board option (RS232 or RS485(2/4 wire))
All standard IQ3 features
BACnet is a registered trademark of ASHRAE. ASHRAE does not endorse, approve or test products for compliance with ASHRAE standards. Compliance of listed products to the requirements of ASHRAE Standard 135 is the responsibility of BACnet International (BI). BTL is a registered trademark of BI.

Trend LAN/Ethernet
UI: 6
DI: no
TI: no
AO: 6
DO: no
DOS: no
Network: Trend LAN
Integration possible with: TCP/IP
Maximum expansion: no expansion
Power: 100..240Vac


IQ3XACT/12/XNC/LAN/BAC/24

Honeywell IQ3 BACnet Integration Controllers

The IQ3../.../XNC/BAC/... provides a flexible way of interfacing the IQ system with 3rd party systems. It utilises both standard IQ configuration modules, and the Trend Custom Language (TCL) to present information from other systems as though it were from an IQ controller. It also allows parameters within the 3rd party system to be adjusted from IQ system Supervisor and Tool software. The optional serial auxiliary board (/SER/) provides an additional RS232 or RS485 (2/4 wire) (or also RS422) port for communicating with other devices.
Flexible method of interfacing with 3rd party systems
BACnet over IP
Enhanced Custom Language (TCL)
Standard IQ configuration modules
Serial auxiliary board option (RS232 or RS485(2/4 wire))
All standard IQ3 features
BACnet is a registered trademark of ASHRAE. ASHRAE does not endorse, approve or test products for compliance with ASHRAE standards. Compliance of listed products to the requirements of ASHRAE Standard 135 is the responsibility of BACnet International (BI). BTL is a registered trademark of BI.

Trend LAN/Ethernet
UI: 6
DI: no
TI: no
AO: 6
DO: no
DOS: no
Network: Trend LAN
Integration possible with: TCP/IP
Maximum expansion: no expansion
Power: 24Vac/24..60Vdc


IQ3XACT/12/XNC/SER/100-240

Honeywell IQ3 Integration Controllers

The IQ3../.../XNC/... provides a flexible way of interfacing the IQ system with 3rd party systems. It utilises both standard IQ configuration modules, and the Trend Custom Language (TCL) to present information from other systems as though it were from an IQ controller. It also allows parameters within the 3rd party system to be adjusted from IQ system Supervisor and Tool software. The optional serial auxiliary board (/SER/) provides an additional RS232 or RS485 (2/4 wire) (or also RS422) port for communicating with other devices.
The product also includes:
All standard IQ3 features
Modbus drivers (free download from Trend website)
MBus drivers (free download from Trend website)

Ethernet/Serial
UI: 6
DI: no
TI: no
AO: 6
DO: no
DOS: no
Network: TCP/IP
Integration possible with: RS232/RS485(2/4 wire)
Maximum expansion: no expansion
Power: 100..240Vac


IQ3XACT/12/XNC/SER/24

Honeywell IQ3 Integration Controllers

The IQ3../.../XNC/... provides a flexible way of interfacing the IQ system with 3rd party systems. It utilises both standard IQ configuration modules, and the Trend Custom Language (TCL) to present information from other systems as though it were from an IQ controller. It also allows parameters within the 3rd party system to be adjusted from IQ system Supervisor and Tool software. The optional serial auxiliary board (/SER/) provides an additional RS232 or RS485 (2/4 wire) (or also RS422) port for communicating with other devices.
The product also includes:
All standard IQ3 features
Modbus drivers (free download from Trend website)
MBus drivers (free download from Trend website)

Ethernet/Serial
UI: 6
DI: no
TI: no
AO: 6
DO: no
DOS: no
Network: TCP/IP
Integration possible with: RS232/RS485(2/4 wire)
Maximum expansion: no expansion
Power: 24Vac/24..60Vdc


IQ3XACT/12/XNC/SER/BAC/100-240

Honeywell IQ3 BACnet Integration Controllers

The IQ3../.../XNC/BAC/... provides a flexible way of interfacing the IQ system with 3rd party systems. It utilises both standard IQ configuration modules, and the Trend Custom Language (TCL) to present information from other systems as though it were from an IQ controller. It also allows parameters within the 3rd party system to be adjusted from IQ system Supervisor and Tool software. The optional serial auxiliary board (/SER/) provides an additional RS232 or RS485 (2/4 wire) (or also RS422) port for communicating with other devices.
Flexible method of interfacing with 3rd party systems
BACnet over IP
Enhanced Custom Language (TCL)
Standard IQ configuration modules
Serial auxiliary board option (RS232 or RS485(2/4 wire))
All standard IQ3 features
BACnet is a registered trademark of ASHRAE. ASHRAE does not endorse, approve or test products for compliance with ASHRAE standards. Compliance of listed products to the requirements of ASHRAE Standard 135 is the responsibility of BACnet International (BI). BTL is a registered trademark of BI.

Ethernet/Serial
UI: 6
DI: no
TI: no
AO: 6
DO: no
DOS: no
Network: TCP/IP
Integration possible with: RS232/RS485(2/4 wire)
Maximum expansion: no expansion
Power: 100..240Vac


IQ3XACT/12/XNC/SER/BAC/24

Honeywell IQ3 BACnet Integration Controllers

The IQ3../.../XNC/BAC/... provides a flexible way of interfacing the IQ system with 3rd party systems. It utilises both standard IQ configuration modules, and the Trend Custom Language (TCL) to present information from other systems as though it were from an IQ controller. It also allows parameters within the 3rd party system to be adjusted from IQ system Supervisor and Tool software. The optional serial auxiliary board (/SER/) provides an additional RS232 or RS485 (2/4 wire) (or also RS422) port for communicating with other devices.
Flexible method of interfacing with 3rd party systems
BACnet over IP
Enhanced Custom Language (TCL)
Standard IQ configuration modules
Serial auxiliary board option (RS232 or RS485(2/4 wire))
All standard IQ3 features
BACnet is a registered trademark of ASHRAE. ASHRAE does not endorse, approve or test products for compliance with ASHRAE standards. Compliance of listed products to the requirements of ASHRAE Standard 135 is the responsibility of BACnet International (BI). BTL is a registered trademark of BI.

Ethernet/Serial
UI: 6
DI: no
TI: no
AO: 6
DO: no
DOS: no
Network: TCP/IP
Integration possible with: RS232/RS485(2/4 wire)
Maximum expansion: no expansion
Power: 24Vac/24..60Vdc


IQ3XACT/12/XNC/SER/UK/100-240

Honeywell Electricity Meter, Three Phase, Multi Parameter, EM-MPO
Accessories

IQ3xact -230v integration controller for interfacing to EM/MPO... Electricity meters; standard solutions available for download



IQ3XACT/12/XNC/SER/UK/24

Honeywell Electricity Meter, Three Phase, Multi Parameter, EM-MPO
Accessories

IQ3xact -24v integration controller for interfacing to EM/MPO... Electricity meters; standard solutions available for download



IQ3XACT/XML/UP

Honeywell IQ3 Input/Output modules
Accessories

Upgrade to add XML services to IQ3xact v2.2 or greater



IQ3XCITE/00/XNC/100-240

Honeywell IQ3 Integration Controllers

The IQ3../.../XNC/... provides a flexible way of interfacing the IQ system with 3rd party systems. It utilises both standard IQ configuration modules, and the Trend Custom Language (TCL) to present information from other systems as though it were from an IQ controller. It also allows parameters within the 3rd party system to be adjusted from IQ system Supervisor and Tool software. The optional serial auxiliary board (/SER/) provides an additional RS232 or RS485 (2/4 wire) (or also RS422) port for communicating with other devices.
The product also includes:
All standard IQ3 features
Modbus drivers (free download from Trend website)
MBus drivers (free download from Trend website)

Ethernet/Ethernet
UI: no
DI: no
TI: no
AO: no
DO: no
DOS: no
Network: TCP/IP
Integration possible with: TCP/IP
Maximum expansion: no expansion
Power: 100..240Vac


IQ3XCITE/00/XNC/24

Honeywell IQ3 Integration Controllers

The IQ3../.../XNC/... provides a flexible way of interfacing the IQ system with 3rd party systems. It utilises both standard IQ configuration modules, and the Trend Custom Language (TCL) to present information from other systems as though it were from an IQ controller. It also allows parameters within the 3rd party system to be adjusted from IQ system Supervisor and Tool software. The optional serial auxiliary board (/SER/) provides an additional RS232 or RS485 (2/4 wire) (or also RS422) port for communicating with other devices.
The product also includes:
All standard IQ3 features
Modbus drivers (free download from Trend website)
MBus drivers (free download from Trend website)

Ethernet/Ethernet
UI: no
DI: no
TI: no
AO: no
DO: no
DOS: no
Network: TCP/IP
Integration possible with: TCP/IP
Maximum expansion: no expansion
Power: 24Vac/24..60Vdc


IQ3XCITE/00/XNC/BAC/100-240

Honeywell IQ3 BACnet Integration Controllers

The IQ3../.../XNC/BAC/... provides a flexible way of interfacing the IQ system with 3rd party systems. It utilises both standard IQ configuration modules, and the Trend Custom Language (TCL) to present information from other systems as though it were from an IQ controller. It also allows parameters within the 3rd party system to be adjusted from IQ system Supervisor and Tool software. The optional serial auxiliary board (/SER/) provides an additional RS232 or RS485 (2/4 wire) (or also RS422) port for communicating with other devices.
Flexible method of interfacing with 3rd party systems
BACnet over IP
Enhanced Custom Language (TCL)
Standard IQ configuration modules
Serial auxiliary board option (RS232 or RS485(2/4 wire))
All standard IQ3 features
BACnet is a registered trademark of ASHRAE. ASHRAE does not endorse, approve or test products for compliance with ASHRAE standards. Compliance of listed products to the requirements of ASHRAE Standard 135 is the responsibility of BACnet International (BI). BTL is a registered trademark of BI.

Ethernet/Ethernet
UI: no
DI: no
TI: no
AO: no
DO: no
DOS: no
Network: TCP/IP
Integration possible with: TCP/IP
Maximum expansion: no expansion
Power: 100..240Vac


IQ3XCITE/00/XNC/BAC/24

Honeywell IQ3 BACnet Integration Controllers

The IQ3../.../XNC/BAC/... provides a flexible way of interfacing the IQ system with 3rd party systems. It utilises both standard IQ configuration modules, and the Trend Custom Language (TCL) to present information from other systems as though it were from an IQ controller. It also allows parameters within the 3rd party system to be adjusted from IQ system Supervisor and Tool software. The optional serial auxiliary board (/SER/) provides an additional RS232 or RS485 (2/4 wire) (or also RS422) port for communicating with other devices.
Flexible method of interfacing with 3rd party systems
BACnet over IP
Enhanced Custom Language (TCL)
Standard IQ configuration modules
Serial auxiliary board option (RS232 or RS485(2/4 wire))
All standard IQ3 features
BACnet is a registered trademark of ASHRAE. ASHRAE does not endorse, approve or test products for compliance with ASHRAE standards. Compliance of listed products to the requirements of ASHRAE Standard 135 is the responsibility of BACnet International (BI). BTL is a registered trademark of BI.

Ethernet/Ethernet
UI: no
DI: no
TI: no
AO: no
DO: no
DOS: no
Network: TCP/IP
Integration possible with: TCP/IP
Maximum expansion: no expansion
Power: 24Vac/24..60Vdc


IQ3XCITE/00/XNC/LAN/100-240

Honeywell IQ3 Integration Controllers

The IQ3../.../XNC/... provides a flexible way of interfacing the IQ system with 3rd party systems. It utilises both standard IQ configuration modules, and the Trend Custom Language (TCL) to present information from other systems as though it were from an IQ controller. It also allows parameters within the 3rd party system to be adjusted from IQ system Supervisor and Tool software. The optional serial auxiliary board (/SER/) provides an additional RS232 or RS485 (2/4 wire) (or also RS422) port for communicating with other devices.
The product also includes:
All standard IQ3 features
Modbus drivers (free download from Trend website)
MBus drivers (free download from Trend website)

Trend LAN/Ethernet
UI: no
DI: no
TI: no
AO: no
DO: no
DOS: no
Network: Trend LAN
Integration possible with: TCP/IP
Maximum expansion: no expansion
Power: 100..240Vac


IQ3XCITE/00/XNC/LAN/24

Honeywell IQ3 Integration Controllers

The IQ3../.../XNC/... provides a flexible way of interfacing the IQ system with 3rd party systems. It utilises both standard IQ configuration modules, and the Trend Custom Language (TCL) to present information from other systems as though it were from an IQ controller. It also allows parameters within the 3rd party system to be adjusted from IQ system Supervisor and Tool software. The optional serial auxiliary board (/SER/) provides an additional RS232 or RS485 (2/4 wire) (or also RS422) port for communicating with other devices.
The product also includes:
All standard IQ3 features
Modbus drivers (free download from Trend website)
MBus drivers (free download from Trend website)

Trend LAN/Ethernet
UI: no
DI: no
TI: no
AO: no
DO: no
DOS: no
Network: Trend LAN
Integration possible with: TCP/IP
Maximum expansion: no expansion
Power: 24Vac/24..60Vdc


IQ3XCITE/00/XNC/LAN/BAC/100-240

Honeywell IQ3 BACnet Integration Controllers

The IQ3../.../XNC/BAC/... provides a flexible way of interfacing the IQ system with 3rd party systems. It utilises both standard IQ configuration modules, and the Trend Custom Language (TCL) to present information from other systems as though it were from an IQ controller. It also allows parameters within the 3rd party system to be adjusted from IQ system Supervisor and Tool software. The optional serial auxiliary board (/SER/) provides an additional RS232 or RS485 (2/4 wire) (or also RS422) port for communicating with other devices.
Flexible method of interfacing with 3rd party systems
BACnet over IP
Enhanced Custom Language (TCL)
Standard IQ configuration modules
Serial auxiliary board option (RS232 or RS485(2/4 wire))
All standard IQ3 features
BACnet is a registered trademark of ASHRAE. ASHRAE does not endorse, approve or test products for compliance with ASHRAE standards. Compliance of listed products to the requirements of ASHRAE Standard 135 is the responsibility of BACnet International (BI). BTL is a registered trademark of BI.

Trend LAN/Ethernet
UI: no
DI: no
TI: no
AO: no
DO: no
DOS: no
Network: Trend LAN
Integration possible with: TCP/IP
Maximum expansion: no expansion
Power: 100..240Vac


IQ3XCITE/00/XNC/LAN/BAC/24

Honeywell IQ3 BACnet Integration Controllers

The IQ3../.../XNC/BAC/... provides a flexible way of interfacing the IQ system with 3rd party systems. It utilises both standard IQ configuration modules, and the Trend Custom Language (TCL) to present information from other systems as though it were from an IQ controller. It also allows parameters within the 3rd party system to be adjusted from IQ system Supervisor and Tool software. The optional serial auxiliary board (/SER/) provides an additional RS232 or RS485 (2/4 wire) (or also RS422) port for communicating with other devices.
Flexible method of interfacing with 3rd party systems
BACnet over IP
Enhanced Custom Language (TCL)
Standard IQ configuration modules
Serial auxiliary board option (RS232 or RS485(2/4 wire))
All standard IQ3 features
BACnet is a registered trademark of ASHRAE. ASHRAE does not endorse, approve or test products for compliance with ASHRAE standards. Compliance of listed products to the requirements of ASHRAE Standard 135 is the responsibility of BACnet International (BI). BTL is a registered trademark of BI.

Trend LAN/Ethernet
UI: no
DI: no
TI: no
AO: no
DO: no
DOS: no
Network: Trend LAN
Integration possible with: TCP/IP
Maximum expansion: no expansion
Power: 24Vac/24..60Vdc


IQ3XCITE/00/XNC/SER/100-240

Honeywell IQ3 Integration Controllers

The IQ3../.../XNC/... provides a flexible way of interfacing the IQ system with 3rd party systems. It utilises both standard IQ configuration modules, and the Trend Custom Language (TCL) to present information from other systems as though it were from an IQ controller. It also allows parameters within the 3rd party system to be adjusted from IQ system Supervisor and Tool software. The optional serial auxiliary board (/SER/) provides an additional RS232 or RS485 (2/4 wire) (or also RS422) port for communicating with other devices.
The product also includes:
All standard IQ3 features
Modbus drivers (free download from Trend website)
MBus drivers (free download from Trend website)

Ethernet/Serial
UI: no
DI: no
TI: no
AO: no
DO: no
DOS: no
Network: TCP/IP
Integration possible with: RS232/RS485(2/4 wire)
Maximum expansion: no expansion
Power: 100..240Vac


IQ3XCITE/00/XNC/SER/24

Honeywell IQ3 Integration Controllers

The IQ3../.../XNC/... provides a flexible way of interfacing the IQ system with 3rd party systems. It utilises both standard IQ configuration modules, and the Trend Custom Language (TCL) to present information from other systems as though it were from an IQ controller. It also allows parameters within the 3rd party system to be adjusted from IQ system Supervisor and Tool software. The optional serial auxiliary board (/SER/) provides an additional RS232 or RS485 (2/4 wire) (or also RS422) port for communicating with other devices.
The product also includes:
All standard IQ3 features
Modbus drivers (free download from Trend website)
MBus drivers (free download from Trend website)

Ethernet/Serial
UI: no
DI: no
TI: no
AO: no
DO: no
DOS: no
Network: TCP/IP
Integration possible with: RS232/RS485(2/4 wire)
Maximum expansion: no expansion
Power: 24Vac/24..60Vdc


IQ3XCITE/00/XNC/SER/BAC/100-240

Honeywell IQ3 BACnet Integration Controllers

The IQ3../.../XNC/BAC/... provides a flexible way of interfacing the IQ system with 3rd party systems. It utilises both standard IQ configuration modules, and the Trend Custom Language (TCL) to present information from other systems as though it were from an IQ controller. It also allows parameters within the 3rd party system to be adjusted from IQ system Supervisor and Tool software. The optional serial auxiliary board (/SER/) provides an additional RS232 or RS485 (2/4 wire) (or also RS422) port for communicating with other devices.
Flexible method of interfacing with 3rd party systems
BACnet over IP
Enhanced Custom Language (TCL)
Standard IQ configuration modules
Serial auxiliary board option (RS232 or RS485(2/4 wire))
All standard IQ3 features
BACnet is a registered trademark of ASHRAE. ASHRAE does not endorse, approve or test products for compliance with ASHRAE standards. Compliance of listed products to the requirements of ASHRAE Standard 135 is the responsibility of BACnet International (BI). BTL is a registered trademark of BI.

Ethernet/Serial
UI: no
DI: no
TI: no
AO: no
DO: no
DOS: no
Network: TCP/IP
Integration possible with: RS232/RS485(2/4 wire)
Maximum expansion: no expansion
Power: 100..240Vac


IQ3XCITE/00/XNC/SER/BAC/24

Honeywell IQ3 BACnet Integration Controllers

The IQ3../.../XNC/BAC/... provides a flexible way of interfacing the IQ system with 3rd party systems. It utilises both standard IQ configuration modules, and the Trend Custom Language (TCL) to present information from other systems as though it were from an IQ controller. It also allows parameters within the 3rd party system to be adjusted from IQ system Supervisor and Tool software. The optional serial auxiliary board (/SER/) provides an additional RS232 or RS485 (2/4 wire) (or also RS422) port for communicating with other devices.
Flexible method of interfacing with 3rd party systems
BACnet over IP
Enhanced Custom Language (TCL)
Standard IQ configuration modules
Serial auxiliary board option (RS232 or RS485(2/4 wire))
All standard IQ3 features
BACnet is a registered trademark of ASHRAE. ASHRAE does not endorse, approve or test products for compliance with ASHRAE standards. Compliance of listed products to the requirements of ASHRAE Standard 135 is the responsibility of BACnet International (BI). BTL is a registered trademark of BI.

Ethernet/Serial
UI: no
DI: no
TI: no
AO: no
DO: no
DOS: no
Network: TCP/IP
Integration possible with: RS232/RS485(2/4 wire)
Maximum expansion: no expansion
Power: 24Vac/24..60Vdc


IQ3XCITE/128/100-240

Honeywell IQ3 Web Enabled Controllers

The IQ3 controllers are Building Management System controllers that use Ethernet and TCP/IP networking technologies. Each controller incorporates a web server which can deliver user-specific web pages to a PC or mobile device running internet browser software. If a system is set up with the correct connections, a user with the appropriate security codes can monitor or adjust the controller from any Internet access point in the world. It is also compatible with the traditional IQ system protocol.
Network: TCP/IP
The following features are also available:
Ethernet 10 Mbps main network with TCP/IP protocol
Embedded web server with security protected monitor/control
Compatible with existing IQ system protocol
Flexible number of software strategy modules
Small footprint with DIN rail mounting

Controllers, expandible to a maximum of 112 extra points or 15 I/O Modules
UI: 10
DI: no
TI: no
AO: 6
DO: no
DOS: no
Power: 100..240Vac


IQ3XCITE/128/24

Honeywell IQ3 Web Enabled Controllers

The IQ3 controllers are Building Management System controllers that use Ethernet and TCP/IP networking technologies. Each controller incorporates a web server which can deliver user-specific web pages to a PC or mobile device running internet browser software. If a system is set up with the correct connections, a user with the appropriate security codes can monitor or adjust the controller from any Internet access point in the world. It is also compatible with the traditional IQ system protocol.
Network: TCP/IP
The following features are also available:
Ethernet 10 Mbps main network with TCP/IP protocol
Embedded web server with security protected monitor/control
Compatible with existing IQ system protocol
Flexible number of software strategy modules
Small footprint with DIN rail mounting

Controllers, expandible to a maximum of 112 extra points or 15 I/O Modules
UI: 10
DI: no
TI: no
AO: 6
DO: no
DOS: no
Power: 24Vac/24..60Vdc


IQ3XCITE/128/BAC/100-240

Honeywell IQ3 Web Enabled BACnet Controllers

The IQ3 BACnet controllers are Building Management System controllers that use BACnet protocol over Ethernet and TCP/IP networking technologies. Each controller incorporates a web server which can deliver user-specific web pages to a PC or mobile device running internet browser software. If a system is set up with the correct connections, a user with the appropriate security codes can monitor or adjust the controller from any Internet access point in the world. It is also compatible with the traditional IQ system protocol.
Network: TCP/IP
The following features are also available:
Ethernet 10 Mbps main network with TCP/IP protocol
Embedded web server with security protected monitor/control
BACnet over IP
Compatible with existing IQ system protocol
I/O bus allows separate placement of I/O modules
Flexible number of software strategy modules
Small footprint with DIN rail mounting

Controllers, expandible to a maximum of 112 extra points or 15 I/O Modules
UI: 10
DI: no
TI: no
AO: 6
DO: no
DOS: no
Power: 100..240Vac


IQ3XCITE/128/BAC/24

Honeywell IQ3 Web Enabled BACnet Controllers

The IQ3 BACnet controllers are Building Management System controllers that use BACnet protocol over Ethernet and TCP/IP networking technologies. Each controller incorporates a web server which can deliver user-specific web pages to a PC or mobile device running internet browser software. If a system is set up with the correct connections, a user with the appropriate security codes can monitor or adjust the controller from any Internet access point in the world. It is also compatible with the traditional IQ system protocol.
Network: TCP/IP
The following features are also available:
Ethernet 10 Mbps main network with TCP/IP protocol
Embedded web server with security protected monitor/control
BACnet over IP
Compatible with existing IQ system protocol
I/O bus allows separate placement of I/O modules
Flexible number of software strategy modules
Small footprint with DIN rail mounting

Controllers, expandible to a maximum of 112 extra points or 15 I/O Modules
UI: 10
DI: no
TI: no
AO: 6
DO: no
DOS: no
Power: 24Vac/24..60Vdc


IQ3XCITE/128/LAN/100-240

Honeywell IQ3 Trend LAN Controllers

The IQ3 Trend LAN controllers maintain all of the features of the IQ3XCITE range, however they use the Trend proprietary LAN for backward compatibility with IQ2 controllers. Each controller still incorporates a web server which, if Ethernet is connected, can deliver user specific web pages to a PC or mobile device running internet browser software. If a system is set up with the correct connections, a user with the appropriate security codes can monitor or adjust the controller from any Internet access point in the world.
Network: Trend LAN
Trend Proprietary LAN main network for Backward compatibility to IQ2 controllers
Embedded web server
Security protected monitor/control via web browser
Compatible with existing IQ system protocol
Small footprint with DIN rail mounting

Controllers, expandible to a maximum of 112 extra points or 15 I/O Modules
UI: 10
DI: no
TI: no
AO: 6
DO: no
DOS: no
Power: 100..240Vac


IQ3XCITE/128/LAN/24

Honeywell IQ3 Trend LAN Controllers

The IQ3 Trend LAN controllers maintain all of the features of the IQ3XCITE range, however they use the Trend proprietary LAN for backward compatibility with IQ2 controllers. Each controller still incorporates a web server which, if Ethernet is connected, can deliver user specific web pages to a PC or mobile device running internet browser software. If a system is set up with the correct connections, a user with the appropriate security codes can monitor or adjust the controller from any Internet access point in the world.
Network: Trend LAN
Trend Proprietary LAN main network for Backward compatibility to IQ2 controllers
Embedded web server
Security protected monitor/control via web browser
Compatible with existing IQ system protocol
Small footprint with DIN rail mounting

Controllers, expandible to a maximum of 112 extra points or 15 I/O Modules
UI: 10
DI: no
TI: no
AO: 6
DO: no
DOS: no
Power: 24Vac/24..60Vdc


IQ3XCITE/128/LAN/BAC/100-240

Honeywell IQ3 Trend LAN BACnet Controllers

The IQ3 Trend Lan BACnet controllers are Building Management System controllers that are compatible with the traditional IQ system protocol over the Trend LAN and use BACnet protocol over Ethernet and TCP/IP networking technologies. Each controller incorporates a web server which can deliver user-specific web pages to a PC or mobile device running internet browser software. If a system is set up with the correct connections, a user with the appropriate security codes can monitor or adjust the controller from any Internet access point in the world.
Network: Trend LAN
Features also include:
Trend Proprietary LAN main network for Backward compatibility to IQ2 controllers
Embedded web server with security protected monitor/control
BACnet over IP
I/O bus allows separate placement of I/O modules
MBus drivers (available through free download from Trend)
Modbus drivers (available through free download from Trend)
Flexible number of software strategy modules
Small footprint with DIN rail mounting

Controllers, expandible to a maximum of 112 extra points or 15 I/O Modules
UI: 10
DI: no
TI: no
AO: 6
DO: no
DOS: no
Power: 100..240Vac


IQ3XCITE/128/LAN/BAC/24

Honeywell IQ3 Trend LAN BACnet Controllers

The IQ3 Trend Lan BACnet controllers are Building Management System controllers that are compatible with the traditional IQ system protocol over the Trend LAN and use BACnet protocol over Ethernet and TCP/IP networking technologies. Each controller incorporates a web server which can deliver user-specific web pages to a PC or mobile device running internet browser software. If a system is set up with the correct connections, a user with the appropriate security codes can monitor or adjust the controller from any Internet access point in the world.
Network: Trend LAN
Features also include:
Trend Proprietary LAN main network for Backward compatibility to IQ2 controllers
Embedded web server with security protected monitor/control
BACnet over IP
I/O bus allows separate placement of I/O modules
MBus drivers (available through free download from Trend)
Modbus drivers (available through free download from Trend)
Flexible number of software strategy modules
Small footprint with DIN rail mounting

Controllers, expandible to a maximum of 112 extra points or 15 I/O Modules
UI: 10
DI: no
TI: no
AO: 6
DO: no
DOS: no
Power: 24Vac/24..60Vdc


IQ3XCITE/16/100-240

Honeywell IQ3 Web Enabled Controllers

The IQ3 controllers are Building Management System controllers that use Ethernet and TCP/IP networking technologies. Each controller incorporates a web server which can deliver user-specific web pages to a PC or mobile device running internet browser software. If a system is set up with the correct connections, a user with the appropriate security codes can monitor or adjust the controller from any Internet access point in the world. It is also compatible with the traditional IQ system protocol.
Network: TCP/IP
The following features are also available:
Ethernet 10 Mbps main network with TCP/IP protocol
Embedded web server with security protected monitor/control
Compatible with existing IQ system protocol
Flexible number of software strategy modules
Small footprint with DIN rail mounting

Controllers, fixed I/O
UI: 10
DI: no
TI: no
AO: 6
DO: no
DOS: no
Power: 100..240Vac


IQ3XCITE/16/24

Honeywell IQ3 Web Enabled Controllers

The IQ3 controllers are Building Management System controllers that use Ethernet and TCP/IP networking technologies. Each controller incorporates a web server which can deliver user-specific web pages to a PC or mobile device running internet browser software. If a system is set up with the correct connections, a user with the appropriate security codes can monitor or adjust the controller from any Internet access point in the world. It is also compatible with the traditional IQ system protocol.
Network: TCP/IP
The following features are also available:
Ethernet 10 Mbps main network with TCP/IP protocol
Embedded web server with security protected monitor/control
Compatible with existing IQ system protocol
Flexible number of software strategy modules
Small footprint with DIN rail mounting

Controllers, fixed I/O
UI: 10
DI: no
TI: no
AO: 6
DO: no
DOS: no
Power: 24Vac/24..60Vdc


IQ3XCITE/16/BAC/100-240

Honeywell IQ3 Web Enabled BACnet Controllers

The IQ3 BACnet controllers are Building Management System controllers that use BACnet protocol over Ethernet and TCP/IP networking technologies. Each controller incorporates a web server which can deliver user-specific web pages to a PC or mobile device running internet browser software. If a system is set up with the correct connections, a user with the appropriate security codes can monitor or adjust the controller from any Internet access point in the world. It is also compatible with the traditional IQ system protocol.
Network: TCP/IP
The following features are also available:
Ethernet 10 Mbps main network with TCP/IP protocol
Embedded web server with security protected monitor/control
BACnet over IP
Compatible with existing IQ system protocol
I/O bus allows separate placement of I/O modules
Flexible number of software strategy modules
Small footprint with DIN rail mounting

Controllers, fixed I/O
UI: 10
DI: no
TI: no
AO: 6
DO: no
DOS: no
Power: 100..240Vac


IQ3XCITE/16/BAC/24

Honeywell IQ3 Web Enabled BACnet Controllers

The IQ3 BACnet controllers are Building Management System controllers that use BACnet protocol over Ethernet and TCP/IP networking technologies. Each controller incorporates a web server which can deliver user-specific web pages to a PC or mobile device running internet browser software. If a system is set up with the correct connections, a user with the appropriate security codes can monitor or adjust the controller from any Internet access point in the world. It is also compatible with the traditional IQ system protocol.
Network: TCP/IP
The following features are also available:
Ethernet 10 Mbps main network with TCP/IP protocol
Embedded web server with security protected monitor/control
BACnet over IP
Compatible with existing IQ system protocol
I/O bus allows separate placement of I/O modules
Flexible number of software strategy modules
Small footprint with DIN rail mounting

Controllers, fixed I/O
UI: 10
DI: no
TI: no
AO: 6
DO: no
DOS: no
Power: 24Vac/24..60Vdc


IQ3XCITE/16/LAN/100-240

Honeywell IQ3 Trend LAN Controllers

The IQ3 Trend LAN controllers maintain all of the features of the IQ3XCITE range, however they use the Trend proprietary LAN for backward compatibility with IQ2 controllers. Each controller still incorporates a web server which, if Ethernet is connected, can deliver user specific web pages to a PC or mobile device running internet browser software. If a system is set up with the correct connections, a user with the appropriate security codes can monitor or adjust the controller from any Internet access point in the world.
Network: Trend LAN
Trend Proprietary LAN main network for Backward compatibility to IQ2 controllers
Embedded web server
Security protected monitor/control via web browser
Compatible with existing IQ system protocol
Small footprint with DIN rail mounting

Controllers, fixed I/O
UI: 10
DI: no
TI: no
AO: 6
DO: no
DOS: no
Power: 100..240Vac


IQ3XCITE/16/LAN/24

Honeywell IQ3 Trend LAN Controllers

The IQ3 Trend LAN controllers maintain all of the features of the IQ3XCITE range, however they use the Trend proprietary LAN for backward compatibility with IQ2 controllers. Each controller still incorporates a web server which, if Ethernet is connected, can deliver user specific web pages to a PC or mobile device running internet browser software. If a system is set up with the correct connections, a user with the appropriate security codes can monitor or adjust the controller from any Internet access point in the world.
Network: Trend LAN
Trend Proprietary LAN main network for Backward compatibility to IQ2 controllers
Embedded web server
Security protected monitor/control via web browser
Compatible with existing IQ system protocol
Small footprint with DIN rail mounting

Controllers, fixed I/O
UI: 10
DI: no
TI: no
AO: 6
DO: no
DOS: no
Power: 24Vac/24..60Vdc


IQ3XCITE/16/LAN/BAC/100-240

Honeywell IQ3 Trend LAN BACnet Controllers

The IQ3 Trend Lan BACnet controllers are Building Management System controllers that are compatible with the traditional IQ system protocol over the Trend LAN and use BACnet protocol over Ethernet and TCP/IP networking technologies. Each controller incorporates a web server which can deliver user-specific web pages to a PC or mobile device running internet browser software. If a system is set up with the correct connections, a user with the appropriate security codes can monitor or adjust the controller from any Internet access point in the world.
Network: Trend LAN
Features also include:
Trend Proprietary LAN main network for Backward compatibility to IQ2 controllers
Embedded web server with security protected monitor/control
BACnet over IP
I/O bus allows separate placement of I/O modules
MBus drivers (available through free download from Trend)
Modbus drivers (available through free download from Trend)
Flexible number of software strategy modules
Small footprint with DIN rail mounting

Controllers, fixed I/O
UI: 10
DI: no
TI: no
AO: 6
DO: no
DOS: no
Power: 100..240Vac


IQ3XCITE/16/LAN/BAC/24

Honeywell IQ3 Trend LAN BACnet Controllers

The IQ3 Trend Lan BACnet controllers are Building Management System controllers that are compatible with the traditional IQ system protocol over the Trend LAN and use BACnet protocol over Ethernet and TCP/IP networking technologies. Each controller incorporates a web server which can deliver user-specific web pages to a PC or mobile device running internet browser software. If a system is set up with the correct connections, a user with the appropriate security codes can monitor or adjust the controller from any Internet access point in the world.
Network: Trend LAN
Features also include:
Trend Proprietary LAN main network for Backward compatibility to IQ2 controllers
Embedded web server with security protected monitor/control
BACnet over IP
I/O bus allows separate placement of I/O modules
MBus drivers (available through free download from Trend)
Modbus drivers (available through free download from Trend)
Flexible number of software strategy modules
Small footprint with DIN rail mounting

Controllers, fixed I/O
UI: 10
DI: no
TI: no
AO: 6
DO: no
DOS: no
Power: 24Vac/24..60Vdc


IQ3XCITE/96/100-240

Honeywell IQ3 Web Enabled Controllers

The IQ3 controllers are Building Management System controllers that use Ethernet and TCP/IP networking technologies. Each controller incorporates a web server which can deliver user-specific web pages to a PC or mobile device running internet browser software. If a system is set up with the correct connections, a user with the appropriate security codes can monitor or adjust the controller from any Internet access point in the world. It is also compatible with the traditional IQ system protocol.
Network: TCP/IP
The following features are also available:
Ethernet 10 Mbps main network with TCP/IP protocol
Embedded web server with security protected monitor/control
Compatible with existing IQ system protocol
Flexible number of software strategy modules
Small footprint with DIN rail mounting

Controllers, expandible to a maximum of 80 extra points or 15 I/O Modules
UI: 10
DI: no
TI: no
AO: 6
DO: no
DOS: no
Power: 100..240Vac


IQ3XCITE/96/24

Honeywell IQ3 Web Enabled Controllers

The IQ3 controllers are Building Management System controllers that use Ethernet and TCP/IP networking technologies. Each controller incorporates a web server which can deliver user-specific web pages to a PC or mobile device running internet browser software. If a system is set up with the correct connections, a user with the appropriate security codes can monitor or adjust the controller from any Internet access point in the world. It is also compatible with the traditional IQ system protocol.
Network: TCP/IP
The following features are also available:
Ethernet 10 Mbps main network with TCP/IP protocol
Embedded web server with security protected monitor/control
Compatible with existing IQ system protocol
Flexible number of software strategy modules
Small footprint with DIN rail mounting

Controllers, expandible to a maximum of 80 extra points or 15 I/O Modules
UI: 10
DI: no
TI: no
AO: 6
DO: no
DOS: no
Power: 24Vac/24..60Vdc


IQ3XCITE/96/BAC/100-240

Honeywell IQ3 Web Enabled BACnet Controllers

The IQ3 BACnet controllers are Building Management System controllers that use BACnet protocol over Ethernet and TCP/IP networking technologies. Each controller incorporates a web server which can deliver user-specific web pages to a PC or mobile device running internet browser software. If a system is set up with the correct connections, a user with the appropriate security codes can monitor or adjust the controller from any Internet access point in the world. It is also compatible with the traditional IQ system protocol.
Network: TCP/IP
The following features are also available:
Ethernet 10 Mbps main network with TCP/IP protocol
Embedded web server with security protected monitor/control
BACnet over IP
Compatible with existing IQ system protocol
I/O bus allows separate placement of I/O modules
Flexible number of software strategy modules
Small footprint with DIN rail mounting

Controllers, expandible to a maximum of 80 extra points or 15 I/O Modules
UI: 10
DI: no
TI: no
AO: 6
DO: no
DOS: no
Power: 100..240Vac


IQ3XCITE/96/BAC/24

Honeywell IQ3 Web Enabled BACnet Controllers

The IQ3 BACnet controllers are Building Management System controllers that use BACnet protocol over Ethernet and TCP/IP networking technologies. Each controller incorporates a web server which can deliver user-specific web pages to a PC or mobile device running internet browser software. If a system is set up with the correct connections, a user with the appropriate security codes can monitor or adjust the controller from any Internet access point in the world. It is also compatible with the traditional IQ system protocol.
Network: TCP/IP
The following features are also available:
Ethernet 10 Mbps main network with TCP/IP protocol
Embedded web server with security protected monitor/control
BACnet over IP
Compatible with existing IQ system protocol
I/O bus allows separate placement of I/O modules
Flexible number of software strategy modules
Small footprint with DIN rail mounting

Controllers, expandible to a maximum of 80 extra points or 15 I/O Modules
UI: 10
DI: no
TI: no
AO: 6
DO: no
DOS: no
Power: 24Vac/24..60Vdc


IQ3XCITE/96/LAN/100-240

Honeywell IQ3 Trend LAN Controllers

The IQ3 Trend LAN controllers maintain all of the features of the IQ3XCITE range, however they use the Trend proprietary LAN for backward compatibility with IQ2 controllers. Each controller still incorporates a web server which, if Ethernet is connected, can deliver user specific web pages to a PC or mobile device running internet browser software. If a system is set up with the correct connections, a user with the appropriate security codes can monitor or adjust the controller from any Internet access point in the world.
Network: Trend LAN
Trend Proprietary LAN main network for Backward compatibility to IQ2 controllers
Embedded web server
Security protected monitor/control via web browser
Compatible with existing IQ system protocol
Small footprint with DIN rail mounting

Controllers, expandible to a maximum of 80 extra points or 15 I/O Modules
UI: 10
DI: no
TI: no
AO: 6
DO: no
DOS: no
Power: 100..240Vac


IQ3XCITE/96/LAN/24

Honeywell IQ3 Trend LAN Controllers

The IQ3 Trend LAN controllers maintain all of the features of the IQ3XCITE range, however they use the Trend proprietary LAN for backward compatibility with IQ2 controllers. Each controller still incorporates a web server which, if Ethernet is connected, can deliver user specific web pages to a PC or mobile device running internet browser software. If a system is set up with the correct connections, a user with the appropriate security codes can monitor or adjust the controller from any Internet access point in the world.
Network: Trend LAN
Trend Proprietary LAN main network for Backward compatibility to IQ2 controllers
Embedded web server
Security protected monitor/control via web browser
Compatible with existing IQ system protocol
Small footprint with DIN rail mounting

Controllers, expandible to a maximum of 80 extra points or 15 I/O Modules
UI: 10
DI: no
TI: no
AO: 6
DO: no
DOS: no
Power: 24Vac/24..60Vdc


IQ3XCITE/96/LAN/BAC/100-240

Honeywell IQ3 Trend LAN BACnet Controllers

The IQ3 Trend Lan BACnet controllers are Building Management System controllers that are compatible with the traditional IQ system protocol over the Trend LAN and use BACnet protocol over Ethernet and TCP/IP networking technologies. Each controller incorporates a web server which can deliver user-specific web pages to a PC or mobile device running internet browser software. If a system is set up with the correct connections, a user with the appropriate security codes can monitor or adjust the controller from any Internet access point in the world.
Network: Trend LAN
Features also include:
Trend Proprietary LAN main network for Backward compatibility to IQ2 controllers
Embedded web server with security protected monitor/control
BACnet over IP
I/O bus allows separate placement of I/O modules
MBus drivers (available through free download from Trend)
Modbus drivers (available through free download from Trend)
Flexible number of software strategy modules
Small footprint with DIN rail mounting

Controllers, expandible to a maximum of 80 extra points or 15 I/O Modules
UI: 10
DI: no
TI: no
AO: 6
DO: no
DOS: no
Power: 100..240Vac


IQ3XCITE/96/LAN/BAC/24

Honeywell IQ3 Trend LAN BACnet Controllers

The IQ3 Trend Lan BACnet controllers are Building Management System controllers that are compatible with the traditional IQ system protocol over the Trend LAN and use BACnet protocol over Ethernet and TCP/IP networking technologies. Each controller incorporates a web server which can deliver user-specific web pages to a PC or mobile device running internet browser software. If a system is set up with the correct connections, a user with the appropriate security codes can monitor or adjust the controller from any Internet access point in the world.
Network: Trend LAN
Features also include:
Trend Proprietary LAN main network for Backward compatibility to IQ2 controllers
Embedded web server with security protected monitor/control
BACnet over IP
I/O bus allows separate placement of I/O modules
MBus drivers (available through free download from Trend)
Modbus drivers (available through free download from Trend)
Flexible number of software strategy modules
Small footprint with DIN rail mounting

Controllers, expandible to a maximum of 80 extra points or 15 I/O Modules
UI: 10
DI: no
TI: no
AO: 6
DO: no
DOS: no
Power: 24Vac/24..60Vdc


IQ3XCITE/96/XNC/100-240

Honeywell IQ3 Integration Controllers

The IQ3../.../XNC/... provides a flexible way of interfacing the IQ system with 3rd party systems. It utilises both standard IQ configuration modules, and the Trend Custom Language (TCL) to present information from other systems as though it were from an IQ controller. It also allows parameters within the 3rd party system to be adjusted from IQ system Supervisor and Tool software. The optional serial auxiliary board (/SER/) provides an additional RS232 or RS485 (2/4 wire) (or also RS422) port for communicating with other devices.
The product also includes:
All standard IQ3 features
Modbus drivers (free download from Trend website)
MBus drivers (free download from Trend website)

Ethernet/Ethernet
UI: 10
DI: no
TI: no
AO: 6
DO: no
DOS: no
Network: TCP/IP
Integration possible with: TCP/IP
Maximum expansion: 15 modules, 80 points
Power: 100..240Vac


IQ3XCITE/96/XNC/24

Honeywell IQ3 Integration Controllers

The IQ3../.../XNC/... provides a flexible way of interfacing the IQ system with 3rd party systems. It utilises both standard IQ configuration modules, and the Trend Custom Language (TCL) to present information from other systems as though it were from an IQ controller. It also allows parameters within the 3rd party system to be adjusted from IQ system Supervisor and Tool software. The optional serial auxiliary board (/SER/) provides an additional RS232 or RS485 (2/4 wire) (or also RS422) port for communicating with other devices.
The product also includes:
All standard IQ3 features
Modbus drivers (free download from Trend website)
MBus drivers (free download from Trend website)

Ethernet/Ethernet
UI: 10
DI: no
TI: no
AO: 6
DO: no
DOS: no
Network: TCP/IP
Integration possible with: TCP/IP
Maximum expansion: 15 modules, 80 points
Power: 24Vac/24..60Vdc


IQ3XCITE/96/XNC/BAC/100-240

Honeywell IQ3 BACnet Integration Controllers

The IQ3../.../XNC/BAC/... provides a flexible way of interfacing the IQ system with 3rd party systems. It utilises both standard IQ configuration modules, and the Trend Custom Language (TCL) to present information from other systems as though it were from an IQ controller. It also allows parameters within the 3rd party system to be adjusted from IQ system Supervisor and Tool software. The optional serial auxiliary board (/SER/) provides an additional RS232 or RS485 (2/4 wire) (or also RS422) port for communicating with other devices.
Flexible method of interfacing with 3rd party systems
BACnet over IP
Enhanced Custom Language (TCL)
Standard IQ configuration modules
Serial auxiliary board option (RS232 or RS485(2/4 wire))
All standard IQ3 features
BACnet is a registered trademark of ASHRAE. ASHRAE does not endorse, approve or test products for compliance with ASHRAE standards. Compliance of listed products to the requirements of ASHRAE Standard 135 is the responsibility of BACnet International (BI). BTL is a registered trademark of BI.

Ethernet/Ethernet
UI: 10
DI: no
TI: no
AO: 6
DO: no
DOS: no
Network: TCP/IP
Integration possible with: TCP/IP
Maximum expansion: 15 modules, 80 points
Power: 100..240Vac


IQ3XCITE/96/XNC/BAC/24

Honeywell IQ3 BACnet Integration Controllers

The IQ3../.../XNC/BAC/... provides a flexible way of interfacing the IQ system with 3rd party systems. It utilises both standard IQ configuration modules, and the Trend Custom Language (TCL) to present information from other systems as though it were from an IQ controller. It also allows parameters within the 3rd party system to be adjusted from IQ system Supervisor and Tool software. The optional serial auxiliary board (/SER/) provides an additional RS232 or RS485 (2/4 wire) (or also RS422) port for communicating with other devices.
Flexible method of interfacing with 3rd party systems
BACnet over IP
Enhanced Custom Language (TCL)
Standard IQ configuration modules
Serial auxiliary board option (RS232 or RS485(2/4 wire))
All standard IQ3 features
BACnet is a registered trademark of ASHRAE. ASHRAE does not endorse, approve or test products for compliance with ASHRAE standards. Compliance of listed products to the requirements of ASHRAE Standard 135 is the responsibility of BACnet International (BI). BTL is a registered trademark of BI.

Ethernet/Ethernet
UI: 10
DI: no
TI: no
AO: 6
DO: no
DOS: no
Network: TCP/IP
Integration possible with: TCP/IP
Maximum expansion: 15 modules, 80 points
Power: 24Vac/24..60Vdc


IQ3XCITE/96/XNC/LAN/100-240

Honeywell IQ3 Integration Controllers

The IQ3../.../XNC/... provides a flexible way of interfacing the IQ system with 3rd party systems. It utilises both standard IQ configuration modules, and the Trend Custom Language (TCL) to present information from other systems as though it were from an IQ controller. It also allows parameters within the 3rd party system to be adjusted from IQ system Supervisor and Tool software. The optional serial auxiliary board (/SER/) provides an additional RS232 or RS485 (2/4 wire) (or also RS422) port for communicating with other devices.
The product also includes:
All standard IQ3 features
Modbus drivers (free download from Trend website)
MBus drivers (free download from Trend website)

Trend LAN/Ethernet
UI: 10
DI: no
TI: no
AO: 6
DO: no
DOS: no
Network: Trend LAN
Integration possible with: TCP/IP
Maximum expansion: 15 modules, 80 points
Power: 100..240Vac


IQ3XCITE/96/XNC/LAN/24

Honeywell IQ3 Integration Controllers

The IQ3../.../XNC/... provides a flexible way of interfacing the IQ system with 3rd party systems. It utilises both standard IQ configuration modules, and the Trend Custom Language (TCL) to present information from other systems as though it were from an IQ controller. It also allows parameters within the 3rd party system to be adjusted from IQ system Supervisor and Tool software. The optional serial auxiliary board (/SER/) provides an additional RS232 or RS485 (2/4 wire) (or also RS422) port for communicating with other devices.
The product also includes:
All standard IQ3 features
Modbus drivers (free download from Trend website)
MBus drivers (free download from Trend website)

Trend LAN/Ethernet
UI: 10
DI: no
TI: no
AO: 6
DO: no
DOS: no
Network: Trend LAN
Integration possible with: TCP/IP
Maximum expansion: 15 modules, 80 points
Power: 24Vac/24..60Vdc


IQ3XCITE/96/XNC/LAN/BAC/100-240

Honeywell IQ3 BACnet Integration Controllers

The IQ3../.../XNC/BAC/... provides a flexible way of interfacing the IQ system with 3rd party systems. It utilises both standard IQ configuration modules, and the Trend Custom Language (TCL) to present information from other systems as though it were from an IQ controller. It also allows parameters within the 3rd party system to be adjusted from IQ system Supervisor and Tool software. The optional serial auxiliary board (/SER/) provides an additional RS232 or RS485 (2/4 wire) (or also RS422) port for communicating with other devices.
Flexible method of interfacing with 3rd party systems
BACnet over IP
Enhanced Custom Language (TCL)
Standard IQ configuration modules
Serial auxiliary board option (RS232 or RS485(2/4 wire))
All standard IQ3 features
BACnet is a registered trademark of ASHRAE. ASHRAE does not endorse, approve or test products for compliance with ASHRAE standards. Compliance of listed products to the requirements of ASHRAE Standard 135 is the responsibility of BACnet International (BI). BTL is a registered trademark of BI.

Trend LAN/Ethernet
UI: 10
DI: no
TI: no
AO: 6
DO: no
DOS: no
Network: Trend LAN
Integration possible with: TCP/IP
Maximum expansion: 15 modules, 80 points
Power: 100..240Vac


IQ3XCITE/96/XNC/LAN/BAC/24

Honeywell IQ3 BACnet Integration Controllers

The IQ3../.../XNC/BAC/... provides a flexible way of interfacing the IQ system with 3rd party systems. It utilises both standard IQ configuration modules, and the Trend Custom Language (TCL) to present information from other systems as though it were from an IQ controller. It also allows parameters within the 3rd party system to be adjusted from IQ system Supervisor and Tool software. The optional serial auxiliary board (/SER/) provides an additional RS232 or RS485 (2/4 wire) (or also RS422) port for communicating with other devices.
Flexible method of interfacing with 3rd party systems
BACnet over IP
Enhanced Custom Language (TCL)
Standard IQ configuration modules
Serial auxiliary board option (RS232 or RS485(2/4 wire))
All standard IQ3 features
BACnet is a registered trademark of ASHRAE. ASHRAE does not endorse, approve or test products for compliance with ASHRAE standards. Compliance of listed products to the requirements of ASHRAE Standard 135 is the responsibility of BACnet International (BI). BTL is a registered trademark of BI.

Trend LAN/Ethernet
UI: 10
DI: no
TI: no
AO: 6
DO: no
DOS: no
Network: Trend LAN
Integration possible with: TCP/IP
Maximum expansion: 15 modules, 80 points
Power: 24Vac/24..60Vdc


IQ3XCITE/96/XNC/SER/100-240

Honeywell IQ3 Integration Controllers

The IQ3../.../XNC/... provides a flexible way of interfacing the IQ system with 3rd party systems. It utilises both standard IQ configuration modules, and the Trend Custom Language (TCL) to present information from other systems as though it were from an IQ controller. It also allows parameters within the 3rd party system to be adjusted from IQ system Supervisor and Tool software. The optional serial auxiliary board (/SER/) provides an additional RS232 or RS485 (2/4 wire) (or also RS422) port for communicating with other devices.
The product also includes:
All standard IQ3 features
Modbus drivers (free download from Trend website)
MBus drivers (free download from Trend website)

Ethernet/Serial
UI: 10
DI: no
TI: no
AO: 6
DO: no
DOS: no
Network: TCP/IP
Integration possible with: RS232/RS485(2/4 wire)
Maximum expansion: 15 modules, 80 points
Power: 100..240Vac


IQ3XCITE/96/XNC/SER/24

Honeywell IQ3 Integration Controllers

The IQ3../.../XNC/... provides a flexible way of interfacing the IQ system with 3rd party systems. It utilises both standard IQ configuration modules, and the Trend Custom Language (TCL) to present information from other systems as though it were from an IQ controller. It also allows parameters within the 3rd party system to be adjusted from IQ system Supervisor and Tool software. The optional serial auxiliary board (/SER/) provides an additional RS232 or RS485 (2/4 wire) (or also RS422) port for communicating with other devices.
The product also includes:
All standard IQ3 features
Modbus drivers (free download from Trend website)
MBus drivers (free download from Trend website)

Ethernet/Serial
UI: 10
DI: no
TI: no
AO: 6
DO: no
DOS: no
Network: TCP/IP
Integration possible with: RS232/RS485(2/4 wire)
Maximum expansion: 15 modules, 80 points
Power: 24Vac/24..60Vdc


IQ3XCITE/96/XNC/SER/BAC/100-240

Honeywell IQ3 BACnet Integration Controllers

The IQ3../.../XNC/BAC/... provides a flexible way of interfacing the IQ system with 3rd party systems. It utilises both standard IQ configuration modules, and the Trend Custom Language (TCL) to present information from other systems as though it were from an IQ controller. It also allows parameters within the 3rd party system to be adjusted from IQ system Supervisor and Tool software. The optional serial auxiliary board (/SER/) provides an additional RS232 or RS485 (2/4 wire) (or also RS422) port for communicating with other devices.
Flexible method of interfacing with 3rd party systems
BACnet over IP
Enhanced Custom Language (TCL)
Standard IQ configuration modules
Serial auxiliary board option (RS232 or RS485(2/4 wire))
All standard IQ3 features
BACnet is a registered trademark of ASHRAE. ASHRAE does not endorse, approve or test products for compliance with ASHRAE standards. Compliance of listed products to the requirements of ASHRAE Standard 135 is the responsibility of BACnet International (BI). BTL is a registered trademark of BI.

Ethernet/Serial
UI: 10
DI: no
TI: no
AO: 6
DO: no
DOS: no
Network: TCP/IP
Integration possible with: RS232/RS485(2/4 wire)
Maximum expansion: 15 modules, 80 points
Power: 100..240Vac


IQ3XCITE/96/XNC/SER/BAC/24

Honeywell IQ3 BACnet Integration Controllers

The IQ3../.../XNC/BAC/... provides a flexible way of interfacing the IQ system with 3rd party systems. It utilises both standard IQ configuration modules, and the Trend Custom Language (TCL) to present information from other systems as though it were from an IQ controller. It also allows parameters within the 3rd party system to be adjusted from IQ system Supervisor and Tool software. The optional serial auxiliary board (/SER/) provides an additional RS232 or RS485 (2/4 wire) (or also RS422) port for communicating with other devices.
Flexible method of interfacing with 3rd party systems
BACnet over IP
Enhanced Custom Language (TCL)
Standard IQ configuration modules
Serial auxiliary board option (RS232 or RS485(2/4 wire))
All standard IQ3 features
BACnet is a registered trademark of ASHRAE. ASHRAE does not endorse, approve or test products for compliance with ASHRAE standards. Compliance of listed products to the requirements of ASHRAE Standard 135 is the responsibility of BACnet International (BI). BTL is a registered trademark of BI.

Ethernet/Serial
UI: 10
DI: no
TI: no
AO: 6
DO: no
DOS: no
Network: TCP/IP
Integration possible with: RS232/RS485(2/4 wire)
Maximum expansion: 15 modules, 80 points
Power: 24Vac/24..60Vdc


IQ3XCITE/96/XNC/SER/UK/24

Honeywell Electricity Meter, Three Phase, Multi Parameter, EM-MPO
Accessories

IQ3xcite -24v integration controller for interfacing to EM/MPO... Electricity meters; standard solutions available for download



IQ3XCITE/96/XNC/UK/100-240

Honeywell Electricity Meter, Three Phase, Multi Parameter, EM-MPO
Accessories

IQ3xcite -230v integration controller for interfacing to EM/MPO... Electricity meters; standard solutions available for download



IQ3XCITE/BAC/UP

Honeywell IQ3 Input/Output modules
Accessories

Upgrade to add BACnet comms to IQ3xcite v2.2 or greater



IQ3XCITE/XML/UP

Honeywell IQ3 Input/Output modules
Accessories

Upgrade to add XML services to IQ3xcite v2.2 or greater



IQ3xact/00/MSTP/BINC/100-240

Honeywell IQ3 Web Enabled BACnet Controllers

The IQ3 BACnet controllers are Building Management System controllers that use BACnet protocol over Ethernet and TCP/IP networking technologies. Each controller incorporates a web server which can deliver user-specific web pages to a PC or mobile device running internet browser software. If a system is set up with the correct connections, a user with the appropriate security codes can monitor or adjust the controller from any Internet access point in the world. It is also compatible with the traditional IQ system protocol.
Network: TCP/IP
The following features are also available:
Ethernet 10 Mbps main network with TCP/IP protocol
Embedded web server with security protected monitor/control
BACnet over IP
Compatible with existing IQ system protocol
I/O bus allows separate placement of I/O modules
Flexible number of software strategy modules
Small footprint with DIN rail mounting

BINC Controllers, fixed I/O, MSTP routing capability
UI: no
DI: no
TI: no
AO: no
DO: no
DOS: no
Power: 100..240Vac


IQ3xact/00/MSTP/BINC/24

Honeywell IQ3 Web Enabled BACnet Controllers

The IQ3 BACnet controllers are Building Management System controllers that use BACnet protocol over Ethernet and TCP/IP networking technologies. Each controller incorporates a web server which can deliver user-specific web pages to a PC or mobile device running internet browser software. If a system is set up with the correct connections, a user with the appropriate security codes can monitor or adjust the controller from any Internet access point in the world. It is also compatible with the traditional IQ system protocol.
Network: TCP/IP
The following features are also available:
Ethernet 10 Mbps main network with TCP/IP protocol
Embedded web server with security protected monitor/control
BACnet over IP
Compatible with existing IQ system protocol
I/O bus allows separate placement of I/O modules
Flexible number of software strategy modules
Small footprint with DIN rail mounting

BINC Controllers, fixed I/O, MSTP routing capability
UI: no
DI: no
TI: no
AO: no
DO: no
DOS: no
Power: 24Vac/24..60Vdc


IQ3xact/12/MSTP/BINC/100-240

Honeywell IQ3 Web Enabled BACnet Controllers

The IQ3 BACnet controllers are Building Management System controllers that use BACnet protocol over Ethernet and TCP/IP networking technologies. Each controller incorporates a web server which can deliver user-specific web pages to a PC or mobile device running internet browser software. If a system is set up with the correct connections, a user with the appropriate security codes can monitor or adjust the controller from any Internet access point in the world. It is also compatible with the traditional IQ system protocol.
Network: TCP/IP
The following features are also available:
Ethernet 10 Mbps main network with TCP/IP protocol
Embedded web server with security protected monitor/control
BACnet over IP
Compatible with existing IQ system protocol
I/O bus allows separate placement of I/O modules
Flexible number of software strategy modules
Small footprint with DIN rail mounting

BINC Controllers, fixed I/O, MSTP routing capability
UI: 6
DI: no
TI: no
AO: 6
DO: no
DOS: no
Power: 100..240Vac


IQ3xact/12/MSTP/BINC/24

Honeywell IQ3 Web Enabled BACnet Controllers

The IQ3 BACnet controllers are Building Management System controllers that use BACnet protocol over Ethernet and TCP/IP networking technologies. Each controller incorporates a web server which can deliver user-specific web pages to a PC or mobile device running internet browser software. If a system is set up with the correct connections, a user with the appropriate security codes can monitor or adjust the controller from any Internet access point in the world. It is also compatible with the traditional IQ system protocol.
Network: TCP/IP
The following features are also available:
Ethernet 10 Mbps main network with TCP/IP protocol
Embedded web server with security protected monitor/control
BACnet over IP
Compatible with existing IQ system protocol
I/O bus allows separate placement of I/O modules
Flexible number of software strategy modules
Small footprint with DIN rail mounting

BINC Controllers, fixed I/O, MSTP routing capability
UI: 6
DI: no
TI: no
AO: 6
DO: no
DOS: no
Power: 24Vac/24..60Vdc


IQ4NC/00/230

Honeywell Motor Controllers NVMC
Related products

Web enabled controller with no I/O points, non expandable by the I/O bus. Provides routing between MS/TP BACnet, Ethernet and Trend LAN. 100 to 240 Vac.



IQ4NC/00/24VAC

Honeywell Motor Controllers NVMC
Related products

Web enabled controller with no I/O points, non expandable by the I/O bus. Provides routing between MS/TP BACnet, Ethernet and Trend LAN. 24 Vac or 24 to 36 Vdc.



IQ4NC/12/230

Honeywell Motor Controllers NVMC
Related products

Web enabled controller with 12 I/O points, non expandable by the I/O bus. Provides routing between MS/TP BACnet, Ethernet and Trend LAN. 100 to 240 Vac.



IQ4NC/12/24VAC

Honeywell Motor Controllers NVMC
Related products

Web enabled controller with 12 I/O points, non expandable by the I/O bus. Provides routing between MS/TP BACnet, Ethernet and Trend LAN. 24 Vac or 24 to 36 Vdc.



IQEYE/COLLECTOR/230

Honeywell IQEYE Collector Node Controller

The IQEYE Collector collects the data necessary for the IQ EYE Server to carry out the performance monitoring calculations.
Via its integrated EINC L It also enables IQ networks running on the IQ system current loop Lan, Ethernet, and LonWorks bus to be integrated into a single network. It operates at the internetwork level, including the necessary support for WANs. It also provides virtual CNCs that allow supervisory/tool software running in PCs connected to the Ethernet network to connect to the BMS system.
Operation on LonWorks bus is achieved without the need for any LonWorks network management.
UK only requires IQ Assured service agreement to activate
Collection of data for IQEYE Server.
Collection of loop, alarm, and commuication performance data from IQ1, IQ2, IQ3, and IQL controllers.
Integral modem for connection to internet.
Integration of IQ network on IQ system current loop Lan, Ethernet and LonWorks bus via integrated EINC L.
10/100 BASE-T interface.
Eight virtual CNCs for PC connection using Ethernet.
FLASH retains configured data during power fail.
Integration of IQL controllers into IQ system.
Connection to LonWorks bus with IqlTool 2 using virtual CNC.
DHCP Enabled.
Network: TCP/IP + LON + Trend LAN

Data Collectors
Power: 230Vac
Comments: IP40


IQEYE/COLLECTOR/24

Honeywell IQEYE Collector Node Controller

The IQEYE Collector collects the data necessary for the IQ EYE Server to carry out the performance monitoring calculations.
Via its integrated EINC L It also enables IQ networks running on the IQ system current loop Lan, Ethernet, and LonWorks bus to be integrated into a single network. It operates at the internetwork level, including the necessary support for WANs. It also provides virtual CNCs that allow supervisory/tool software running in PCs connected to the Ethernet network to connect to the BMS system.
Operation on LonWorks bus is achieved without the need for any LonWorks network management.
UK only requires IQ Assured service agreement to activate
Collection of data for IQEYE Server.
Collection of loop, alarm, and commuication performance data from IQ1, IQ2, IQ3, and IQL controllers.
Integral modem for connection to internet.
Integration of IQ network on IQ system current loop Lan, Ethernet and LonWorks bus via integrated EINC L.
10/100 BASE-T interface.
Eight virtual CNCs for PC connection using Ethernet.
FLASH retains configured data during power fail.
Integration of IQL controllers into IQ system.
Connection to LonWorks bus with IqlTool 2 using virtual CNC.
DHCP Enabled.
Network: TCP/IP + LON + Trend LAN

Data Collectors
Power: 24Vac
Comments: IP42 NEMA3R


IQL10/AR2/230

Honeywell IQL10 Controllers

The IQL10 is a terminal unit controller which can be networked using a LonWorks network. It can communicate with other IQLs and LonMark devices via the LonWorks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 1 relay output (normally fan on/off), and 4 triac outputs (normally to control valves or dampers). It has 1 variable resistance input which is normally a thermistor temperature sensor.
Network: LON
AI: 1
DO: 1
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: air side
Strategy: raise/lower
Power: 230Vac


IQL10/AR2/24VAC

Honeywell IQL10 Controllers

The IQL10 is a terminal unit controller which can be networked using a LonWorks network. It can communicate with other IQLs and LonMark devices via the LonWorks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 1 relay output (normally fan on/off), and 4 triac outputs (normally to control valves or dampers). It has 1 variable resistance input which is normally a thermistor temperature sensor.
Network: LON
AI: 1
DO: 1
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: air side
Strategy: raise/lower
Power: 24Vac


IQL10/WR4/230

Honeywell IQL10 Controllers

The IQL10 is a terminal unit controller which can be networked using a LonWorks network. It can communicate with other IQLs and LonMark devices via the LonWorks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 1 relay output (normally fan on/off), and 4 triac outputs (normally to control valves or dampers). It has 1 variable resistance input which is normally a thermistor temperature sensor.
Network: LON
AI: 1
DO: 1
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: water side 4 pipe
Strategy: raise/lower
Power: 230Vac


IQL10/WR4/24VAC

Honeywell IQL10 Controllers

The IQL10 is a terminal unit controller which can be networked using a LonWorks network. It can communicate with other IQLs and LonMark devices via the LonWorks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 1 relay output (normally fan on/off), and 4 triac outputs (normally to control valves or dampers). It has 1 variable resistance input which is normally a thermistor temperature sensor.
Network: LON
AI: 1
DO: 1
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: water side 4 pipe
Strategy: raise/lower
Power: 24Vac


IQL10/WT4/230

Honeywell IQL10 Controllers

The IQL10 is a terminal unit controller which can be networked using a LonWorks network. It can communicate with other IQLs and LonMark devices via the LonWorks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 1 relay output (normally fan on/off), and 4 triac outputs (normally to control valves or dampers). It has 1 variable resistance input which is normally a thermistor temperature sensor.
Network: LON
AI: 1
DO: 1
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: water side 4 pipe
Strategy: thermic
Power: 230Vac


IQL10/WT4/24VAC

Honeywell IQL10 Controllers

The IQL10 is a terminal unit controller which can be networked using a LonWorks network. It can communicate with other IQLs and LonMark devices via the LonWorks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 1 relay output (normally fan on/off), and 4 triac outputs (normally to control valves or dampers). It has 1 variable resistance input which is normally a thermistor temperature sensor.
Network: LON
AI: 1
DO: 1
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: water side 4 pipe
Strategy: thermic
Power: 24Vac


IQL11+/AR2/230

Honeywell IQL11 Controllers

The IQL11+ is a terminal unit controller which can be networked using a LonWorks network. It can communicate with other IQLs and LonMark devices via the LonWorks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 1 relay output (normally fan on/off), and 4 triac outputs (normally to control valves or dampers). It has 2 variable resistance inputs of which one is normally a thermistor temperature sensor. There is also a digital input for monitoring a manual button or alarm contact; it can also be used to connect a room display.
Network: LON
AI: 2
DI: 1
DO: 1
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: air side
Strategy: raise/lower
Power: 230Vac


IQL11+/AR2/24VAC

Honeywell IQL11 Controllers

The IQL11+ is a terminal unit controller which can be networked using a LonWorks network. It can communicate with other IQLs and LonMark devices via the LonWorks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 1 relay output (normally fan on/off), and 4 triac outputs (normally to control valves or dampers). It has 2 variable resistance inputs of which one is normally a thermistor temperature sensor. There is also a digital input for monitoring a manual button or alarm contact; it can also be used to connect a room display.
Network: LON
AI: 2
DI: 1
DO: 1
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: air side
Strategy: raise/lower
Power: 24Vac


IQL11+/WR2/230

Honeywell IQL11 Controllers

The IQL11+ is a terminal unit controller which can be networked using a LonWorks network. It can communicate with other IQLs and LonMark devices via the LonWorks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 1 relay output (normally fan on/off), and 4 triac outputs (normally to control valves or dampers). It has 2 variable resistance inputs of which one is normally a thermistor temperature sensor. There is also a digital input for monitoring a manual button or alarm contact; it can also be used to connect a room display.
Network: LON
AI: 2
DI: 1
DO: 1
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: water side 2 pipe
Strategy: raise/lower
Power: 230Vac


IQL11+/WR2/24VAC

Honeywell IQL11 Controllers

The IQL11+ is a terminal unit controller which can be networked using a LonWorks network. It can communicate with other IQLs and LonMark devices via the LonWorks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 1 relay output (normally fan on/off), and 4 triac outputs (normally to control valves or dampers). It has 2 variable resistance inputs of which one is normally a thermistor temperature sensor. There is also a digital input for monitoring a manual button or alarm contact; it can also be used to connect a room display.
Network: LON
AI: 2
DI: 1
DO: 1
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: water side 2 pipe
Strategy: raise/lower
Power: 24Vac


IQL11+/WR4/230

Honeywell IQL11 Controllers

The IQL11+ is a terminal unit controller which can be networked using a LonWorks network. It can communicate with other IQLs and LonMark devices via the LonWorks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 1 relay output (normally fan on/off), and 4 triac outputs (normally to control valves or dampers). It has 2 variable resistance inputs of which one is normally a thermistor temperature sensor. There is also a digital input for monitoring a manual button or alarm contact; it can also be used to connect a room display.
Network: LON
AI: 2
DI: 1
DO: 1
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: water side 4 pipe
Strategy: raise/lower
Power: 230Vac


IQL11+/WR4/24VAC

Honeywell IQL11 Controllers

The IQL11+ is a terminal unit controller which can be networked using a LonWorks network. It can communicate with other IQLs and LonMark devices via the LonWorks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 1 relay output (normally fan on/off), and 4 triac outputs (normally to control valves or dampers). It has 2 variable resistance inputs of which one is normally a thermistor temperature sensor. There is also a digital input for monitoring a manual button or alarm contact; it can also be used to connect a room display.
Network: LON
AI: 2
DI: 1
DO: 1
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: water side 4 pipe
Strategy: raise/lower
Power: 24Vac


IQL11+/WT2/230

Honeywell IQL11 Controllers

The IQL11+ is a terminal unit controller which can be networked using a LonWorks network. It can communicate with other IQLs and LonMark devices via the LonWorks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 1 relay output (normally fan on/off), and 4 triac outputs (normally to control valves or dampers). It has 2 variable resistance inputs of which one is normally a thermistor temperature sensor. There is also a digital input for monitoring a manual button or alarm contact; it can also be used to connect a room display.
Network: LON
AI: 2
DI: 1
DO: 1
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: water side 2 pipe
Strategy: thermic
Power: 230Vac


IQL11+/WT2/24VAC

Honeywell IQL11 Controllers

The IQL11+ is a terminal unit controller which can be networked using a LonWorks network. It can communicate with other IQLs and LonMark devices via the LonWorks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 1 relay output (normally fan on/off), and 4 triac outputs (normally to control valves or dampers). It has 2 variable resistance inputs of which one is normally a thermistor temperature sensor. There is also a digital input for monitoring a manual button or alarm contact; it can also be used to connect a room display.
Network: LON
AI: 2
DI: 1
DO: 1
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: water side 2 pipe
Strategy: thermic
Power: 24Vac


IQL11+/WT4/230

Honeywell IQL11 Controllers

The IQL11+ is a terminal unit controller which can be networked using a LonWorks network. It can communicate with other IQLs and LonMark devices via the LonWorks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 1 relay output (normally fan on/off), and 4 triac outputs (normally to control valves or dampers). It has 2 variable resistance inputs of which one is normally a thermistor temperature sensor. There is also a digital input for monitoring a manual button or alarm contact; it can also be used to connect a room display.
Network: LON
AI: 2
DI: 1
DO: 1
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: water side 4 pipe
Strategy: thermic
Power: 230Vac


IQL11+/WT4/24VAC

Honeywell IQL11 Controllers

The IQL11+ is a terminal unit controller which can be networked using a LonWorks network. It can communicate with other IQLs and LonMark devices via the LonWorks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 1 relay output (normally fan on/off), and 4 triac outputs (normally to control valves or dampers). It has 2 variable resistance inputs of which one is normally a thermistor temperature sensor. There is also a digital input for monitoring a manual button or alarm contact; it can also be used to connect a room display.
Network: LON
AI: 2
DI: 1
DO: 1
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: water side 4 pipe
Strategy: thermic
Power: 24Vac


IQL12/AR2/230

Honeywell IQL12 Controllers

The IQL12 is a terminal unit controller which can be networked using LonWorks (Lon). It can communicate with other IQLs and LonMark devices via the Lon, and with IQ system devices via a LINC unit. It has 3 relay outputs (normally to control fan speed), and 4 triac outputs (normally to control valves or dampers). It has 1 variable resistance input which is normally a thermistor temperature sensor.
Network: LON
AI: 1
DO: 3
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: damper
Strategy: raise/lower
Power: 230Vac


IQL12/AR2/24VAC

Honeywell IQL12 Controllers

The IQL12 is a terminal unit controller which can be networked using LonWorks (Lon). It can communicate with other IQLs and LonMark devices via the Lon, and with IQ system devices via a LINC unit. It has 3 relay outputs (normally to control fan speed), and 4 triac outputs (normally to control valves or dampers). It has 1 variable resistance input which is normally a thermistor temperature sensor.
Network: LON
AI: 1
DO: 3
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: damper
Strategy: raise/lower
Power: 24Vac


IQL12/WR4/230

Honeywell IQL12 Controllers

The IQL12 is a terminal unit controller which can be networked using LonWorks (Lon). It can communicate with other IQLs and LonMark devices via the Lon, and with IQ system devices via a LINC unit. It has 3 relay outputs (normally to control fan speed), and 4 triac outputs (normally to control valves or dampers). It has 1 variable resistance input which is normally a thermistor temperature sensor.
Network: LON
AI: 1
DO: 3
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: heat and cool valve
Strategy: raise/lower
Power: 230Vac


IQL12/WR4/24VAC

Honeywell IQL12 Controllers

The IQL12 is a terminal unit controller which can be networked using LonWorks (Lon). It can communicate with other IQLs and LonMark devices via the Lon, and with IQ system devices via a LINC unit. It has 3 relay outputs (normally to control fan speed), and 4 triac outputs (normally to control valves or dampers). It has 1 variable resistance input which is normally a thermistor temperature sensor.
Network: LON
AI: 1
DO: 3
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: heat and cool valve
Strategy: raise/lower
Power: 24Vac


IQL12/WT4/230

Honeywell IQL12 Controllers

The IQL12 is a terminal unit controller which can be networked using LonWorks (Lon). It can communicate with other IQLs and LonMark devices via the Lon, and with IQ system devices via a LINC unit. It has 3 relay outputs (normally to control fan speed), and 4 triac outputs (normally to control valves or dampers). It has 1 variable resistance input which is normally a thermistor temperature sensor.
Network: LON
AI: 1
DO: 3
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: heat and cool valve
Strategy: thermic
Power: 230Vac


IQL12/WT4/24VAC

Honeywell IQL12 Controllers

The IQL12 is a terminal unit controller which can be networked using LonWorks (Lon). It can communicate with other IQLs and LonMark devices via the Lon, and with IQ system devices via a LINC unit. It has 3 relay outputs (normally to control fan speed), and 4 triac outputs (normally to control valves or dampers). It has 1 variable resistance input which is normally a thermistor temperature sensor.
Network: LON
AI: 1
DO: 3
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: heat and cool valve
Strategy: thermic
Power: 24Vac


IQL13+/AR2/230

Honeywell IQL13 Controllers

The IQL13+ is a terminal unit controller which can be networked using a LonWorks network. It can communicate with other IQLs and LonMark devices via the LonWorks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 3 relay outputs (normally to control fan speed), and 4 triac outputs (normally to control valves or dampers). It has 3 variable resistance inputs of which the first is normally a thermistor temperature sensor. There are also 2 digital inputs for monitoring manual buttons or alarm contacts, one of these (IN4) can be used to connect a Room Display.
Network: LON
AI: 3
DI: 2
DO: 3
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: air side
Strategy: raise/lower
Power: 230Vac


IQL13+/AR2/24VAC

Honeywell IQL13 Controllers

The IQL13+ is a terminal unit controller which can be networked using a LonWorks network. It can communicate with other IQLs and LonMark devices via the LonWorks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 3 relay outputs (normally to control fan speed), and 4 triac outputs (normally to control valves or dampers). It has 3 variable resistance inputs of which the first is normally a thermistor temperature sensor. There are also 2 digital inputs for monitoring manual buttons or alarm contacts, one of these (IN4) can be used to connect a Room Display.
Network: LON
AI: 3
DI: 2
DO: 3
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: air side
Strategy: raise/lower
Power: 24Vac


IQL13+/WR2/230

Honeywell IQL13 Controllers

The IQL13+ is a terminal unit controller which can be networked using a LonWorks network. It can communicate with other IQLs and LonMark devices via the LonWorks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 3 relay outputs (normally to control fan speed), and 4 triac outputs (normally to control valves or dampers). It has 3 variable resistance inputs of which the first is normally a thermistor temperature sensor. There are also 2 digital inputs for monitoring manual buttons or alarm contacts, one of these (IN4) can be used to connect a Room Display.
Network: LON
AI: 3
DI: 2
DO: 3
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: water side 2 pipe
Strategy: raise/lower
Power: 230Vac


IQL13+/WR2/24VAC

Honeywell IQL13 Controllers

The IQL13+ is a terminal unit controller which can be networked using a LonWorks network. It can communicate with other IQLs and LonMark devices via the LonWorks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 3 relay outputs (normally to control fan speed), and 4 triac outputs (normally to control valves or dampers). It has 3 variable resistance inputs of which the first is normally a thermistor temperature sensor. There are also 2 digital inputs for monitoring manual buttons or alarm contacts, one of these (IN4) can be used to connect a Room Display.
Network: LON
AI: 3
DI: 2
DO: 3
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: water side 2 pipe
Strategy: raise/lower
Power: 24Vac


IQL13+/WR4/230

Honeywell IQL13 Controllers

The IQL13+ is a terminal unit controller which can be networked using a LonWorks network. It can communicate with other IQLs and LonMark devices via the LonWorks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 3 relay outputs (normally to control fan speed), and 4 triac outputs (normally to control valves or dampers). It has 3 variable resistance inputs of which the first is normally a thermistor temperature sensor. There are also 2 digital inputs for monitoring manual buttons or alarm contacts, one of these (IN4) can be used to connect a Room Display.
Network: LON
AI: 3
DI: 2
DO: 3
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: water side 4 pipe
Strategy: raise/lower
Power: 230Vac


IQL13+/WR4/24VAC

Honeywell IQL13 Controllers

The IQL13+ is a terminal unit controller which can be networked using a LonWorks network. It can communicate with other IQLs and LonMark devices via the LonWorks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 3 relay outputs (normally to control fan speed), and 4 triac outputs (normally to control valves or dampers). It has 3 variable resistance inputs of which the first is normally a thermistor temperature sensor. There are also 2 digital inputs for monitoring manual buttons or alarm contacts, one of these (IN4) can be used to connect a Room Display.
Network: LON
AI: 3
DI: 2
DO: 3
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: water side 4 pipe
Strategy: raise/lower
Power: 24Vac


IQL13+/WT2/230

Honeywell IQL13 Controllers

The IQL13+ is a terminal unit controller which can be networked using a LonWorks network. It can communicate with other IQLs and LonMark devices via the LonWorks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 3 relay outputs (normally to control fan speed), and 4 triac outputs (normally to control valves or dampers). It has 3 variable resistance inputs of which the first is normally a thermistor temperature sensor. There are also 2 digital inputs for monitoring manual buttons or alarm contacts, one of these (IN4) can be used to connect a Room Display.
Network: LON
AI: 3
DI: 2
DO: 3
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: water side 2 pipe
Strategy: thermic
Power: 230Vac


IQL13+/WT2/24VAC

Honeywell IQL13 Controllers

The IQL13+ is a terminal unit controller which can be networked using a LonWorks network. It can communicate with other IQLs and LonMark devices via the LonWorks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 3 relay outputs (normally to control fan speed), and 4 triac outputs (normally to control valves or dampers). It has 3 variable resistance inputs of which the first is normally a thermistor temperature sensor. There are also 2 digital inputs for monitoring manual buttons or alarm contacts, one of these (IN4) can be used to connect a Room Display.
Network: LON
AI: 3
DI: 2
DO: 3
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: water side 2 pipe
Strategy: thermic
Power: 24Vac


IQL13+/WT4/230

Honeywell IQL13 Controllers

The IQL13+ is a terminal unit controller which can be networked using a LonWorks network. It can communicate with other IQLs and LonMark devices via the LonWorks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 3 relay outputs (normally to control fan speed), and 4 triac outputs (normally to control valves or dampers). It has 3 variable resistance inputs of which the first is normally a thermistor temperature sensor. There are also 2 digital inputs for monitoring manual buttons or alarm contacts, one of these (IN4) can be used to connect a Room Display.
Network: LON
AI: 3
DI: 2
DO: 3
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: water side 4 pipe
Strategy: thermic
Power: 230Vac


IQL13+/WT4/24VAC

Honeywell IQL13 Controllers

The IQL13+ is a terminal unit controller which can be networked using a LonWorks network. It can communicate with other IQLs and LonMark devices via the LonWorks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 3 relay outputs (normally to control fan speed), and 4 triac outputs (normally to control valves or dampers). It has 3 variable resistance inputs of which the first is normally a thermistor temperature sensor. There are also 2 digital inputs for monitoring manual buttons or alarm contacts, one of these (IN4) can be used to connect a Room Display.
Network: LON
AI: 3
DI: 2
DO: 3
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: water side 4 pipe
Strategy: thermic
Power: 24Vac


IQL14/AR2/E/230

Honeywell IQL14 Controllers

The IQL14 is a terminal unit controller which can be networked using LonWorks (Lon). It can communicate with other IQLs and LonMark devices via the Lon, and with IQ system devices via a LINC unit. It has 4 relay outputs (normally 3 are to control fan speed and normally one is to switch an electric heater) and 4 triac outputs (normally to control valves or dampers). It has a variable resistance input which is normally a thermistor temperature sensor.
Network: LON
AI: 1
DO: 4
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: damper
Strategy: raise/lower
Power: 230Vac


IQL14/AR2/E/24VAC

Honeywell IQL14 Controllers

The IQL14 is a terminal unit controller which can be networked using LonWorks (Lon). It can communicate with other IQLs and LonMark devices via the Lon, and with IQ system devices via a LINC unit. It has 4 relay outputs (normally 3 are to control fan speed and normally one is to switch an electric heater) and 4 triac outputs (normally to control valves or dampers). It has a variable resistance input which is normally a thermistor temperature sensor.
Network: LON
AI: 1
DO: 4
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: damper
Strategy: raise/lower
Power: 24Vac


IQL14/WR2/E/230

Honeywell IQL14 Controllers

The IQL14 is a terminal unit controller which can be networked using LonWorks (Lon). It can communicate with other IQLs and LonMark devices via the Lon, and with IQ system devices via a LINC unit. It has 4 relay outputs (normally 3 are to control fan speed and normally one is to switch an electric heater) and 4 triac outputs (normally to control valves or dampers). It has a variable resistance input which is normally a thermistor temperature sensor.
Network: LON
AI: 1
DO: 4
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: heat or cool valve
Strategy: raise/lower
Power: 230Vac


IQL14/WR2/E/24VAC

Honeywell IQL14 Controllers

The IQL14 is a terminal unit controller which can be networked using LonWorks (Lon). It can communicate with other IQLs and LonMark devices via the Lon, and with IQ system devices via a LINC unit. It has 4 relay outputs (normally 3 are to control fan speed and normally one is to switch an electric heater) and 4 triac outputs (normally to control valves or dampers). It has a variable resistance input which is normally a thermistor temperature sensor.
Network: LON
AI: 1
DO: 4
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: heat or cool valve
Strategy: raise/lower
Power: 24Vac


IQL14/WR4/E/230

Honeywell IQL14 Controllers

The IQL14 is a terminal unit controller which can be networked using LonWorks (Lon). It can communicate with other IQLs and LonMark devices via the Lon, and with IQ system devices via a LINC unit. It has 4 relay outputs (normally 3 are to control fan speed and normally one is to switch an electric heater) and 4 triac outputs (normally to control valves or dampers). It has a variable resistance input which is normally a thermistor temperature sensor.
Network: LON
AI: 1
DO: 4
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: heat and cool valve
Strategy: raise/lower
Power: 230Vac


IQL14/WR4/E/24VAC

Honeywell IQL14 Controllers

The IQL14 is a terminal unit controller which can be networked using LonWorks (Lon). It can communicate with other IQLs and LonMark devices via the Lon, and with IQ system devices via a LINC unit. It has 4 relay outputs (normally 3 are to control fan speed and normally one is to switch an electric heater) and 4 triac outputs (normally to control valves or dampers). It has a variable resistance input which is normally a thermistor temperature sensor.
Network: LON
AI: 1
DO: 4
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: heat and cool valve
Strategy: raise/lower
Power: 24Vac


IQL14/WT2/E/230

Honeywell IQL14 Controllers

The IQL14 is a terminal unit controller which can be networked using LonWorks (Lon). It can communicate with other IQLs and LonMark devices via the Lon, and with IQ system devices via a LINC unit. It has 4 relay outputs (normally 3 are to control fan speed and normally one is to switch an electric heater) and 4 triac outputs (normally to control valves or dampers). It has a variable resistance input which is normally a thermistor temperature sensor.
Network: LON
AI: 1
DO: 4
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: heat or cool valve
Strategy: thermic
Power: 230Vac


IQL14/WT2/E/24VAC

Honeywell IQL14 Controllers

The IQL14 is a terminal unit controller which can be networked using LonWorks (Lon). It can communicate with other IQLs and LonMark devices via the Lon, and with IQ system devices via a LINC unit. It has 4 relay outputs (normally 3 are to control fan speed and normally one is to switch an electric heater) and 4 triac outputs (normally to control valves or dampers). It has a variable resistance input which is normally a thermistor temperature sensor.
Network: LON
AI: 1
DO: 4
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: heat or cool valve
Strategy: thermic
Power: 24Vac


IQL14/WT4/E/230

Honeywell IQL14 Controllers

The IQL14 is a terminal unit controller which can be networked using LonWorks (Lon). It can communicate with other IQLs and LonMark devices via the Lon, and with IQ system devices via a LINC unit. It has 4 relay outputs (normally 3 are to control fan speed and normally one is to switch an electric heater) and 4 triac outputs (normally to control valves or dampers). It has a variable resistance input which is normally a thermistor temperature sensor.
Network: LON
AI: 1
DO: 4
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: heat and cool valve
Strategy: thermic
Power: 230Vac


IQL14/WT4/E/24VAC

Honeywell IQL14 Controllers

The IQL14 is a terminal unit controller which can be networked using LonWorks (Lon). It can communicate with other IQLs and LonMark devices via the Lon, and with IQ system devices via a LINC unit. It has 4 relay outputs (normally 3 are to control fan speed and normally one is to switch an electric heater) and 4 triac outputs (normally to control valves or dampers). It has a variable resistance input which is normally a thermistor temperature sensor.
Network: LON
AI: 1
DO: 4
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: heat and cool valve
Strategy: thermic
Power: 24Vac


IQL15+/AR2/E/230

Honeywell IQL15 Controllers

The IQL15+ is a terminal unit controller which can be networked using a LonWorks network. It can communicate with other IQLs and LonMark devices via the LonWorks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 3 relay outputs (normally to control fan speed), and 4 triac outputs (normally to control valves or dampers). A fourth relay is used either as an electric heater output (/E version) or as an auxiliary contact output (/AUX version). It has 3 variable resistance inputs of which the first is normally a thermistor temperature sensor. There are also 2 digital inputs for monitoring manual buttons or alarm contacts, one of these (IN4) can be used to connect a Room Display.
Network: LON
AI: 3
DI: 2
DO: 4
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: air side
Strategy: raise/lower
Power: 230Vac


IQL15+/AR2/E/24VAC

Honeywell IQL15 Controllers

The IQL15+ is a terminal unit controller which can be networked using a LonWorks network. It can communicate with other IQLs and LonMark devices via the LonWorks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 3 relay outputs (normally to control fan speed), and 4 triac outputs (normally to control valves or dampers). A fourth relay is used either as an electric heater output (/E version) or as an auxiliary contact output (/AUX version). It has 3 variable resistance inputs of which the first is normally a thermistor temperature sensor. There are also 2 digital inputs for monitoring manual buttons or alarm contacts, one of these (IN4) can be used to connect a Room Display.
Network: LON
AI: 3
DI: 2
DO: 4
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: air side
Strategy: raise/lower
Power: 24Vac


IQL15+/WR2/E/230

Honeywell IQL15 Controllers

The IQL15+ is a terminal unit controller which can be networked using a LonWorks network. It can communicate with other IQLs and LonMark devices via the LonWorks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 3 relay outputs (normally to control fan speed), and 4 triac outputs (normally to control valves or dampers). A fourth relay is used either as an electric heater output (/E version) or as an auxiliary contact output (/AUX version). It has 3 variable resistance inputs of which the first is normally a thermistor temperature sensor. There are also 2 digital inputs for monitoring manual buttons or alarm contacts, one of these (IN4) can be used to connect a Room Display.
Network: LON
AI: 3
DI: 2
DO: 4
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: water side 2 pipe
Strategy: raise/lower
Power: 230Vac


IQL15+/WR2/E/24VAC

Honeywell IQL15 Controllers

The IQL15+ is a terminal unit controller which can be networked using a LonWorks network. It can communicate with other IQLs and LonMark devices via the LonWorks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 3 relay outputs (normally to control fan speed), and 4 triac outputs (normally to control valves or dampers). A fourth relay is used either as an electric heater output (/E version) or as an auxiliary contact output (/AUX version). It has 3 variable resistance inputs of which the first is normally a thermistor temperature sensor. There are also 2 digital inputs for monitoring manual buttons or alarm contacts, one of these (IN4) can be used to connect a Room Display.
Network: LON
AI: 3
DI: 2
DO: 4
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: water side 2 pipe
Strategy: raise/lower
Power: 24Vac


IQL15+/WR4/E/230

Honeywell IQL15 Controllers

The IQL15+ is a terminal unit controller which can be networked using a LonWorks network. It can communicate with other IQLs and LonMark devices via the LonWorks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 3 relay outputs (normally to control fan speed), and 4 triac outputs (normally to control valves or dampers). A fourth relay is used either as an electric heater output (/E version) or as an auxiliary contact output (/AUX version). It has 3 variable resistance inputs of which the first is normally a thermistor temperature sensor. There are also 2 digital inputs for monitoring manual buttons or alarm contacts, one of these (IN4) can be used to connect a Room Display.
Network: LON
AI: 3
DI: 2
DO: 4
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: water side 4 pipe
Strategy: raise/lower
Power: 230Vac


IQL15+/WR4/E/24VAC

Honeywell IQL15 Controllers

The IQL15+ is a terminal unit controller which can be networked using a LonWorks network. It can communicate with other IQLs and LonMark devices via the LonWorks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 3 relay outputs (normally to control fan speed), and 4 triac outputs (normally to control valves or dampers). A fourth relay is used either as an electric heater output (/E version) or as an auxiliary contact output (/AUX version). It has 3 variable resistance inputs of which the first is normally a thermistor temperature sensor. There are also 2 digital inputs for monitoring manual buttons or alarm contacts, one of these (IN4) can be used to connect a Room Display.
Network: LON
AI: 3
DI: 2
DO: 4
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: water side 4 pipe
Strategy: raise/lower
Power: 24Vac


IQL15+/WT2/E/230

Honeywell IQL15 Controllers

The IQL15+ is a terminal unit controller which can be networked using a LonWorks network. It can communicate with other IQLs and LonMark devices via the LonWorks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 3 relay outputs (normally to control fan speed), and 4 triac outputs (normally to control valves or dampers). A fourth relay is used either as an electric heater output (/E version) or as an auxiliary contact output (/AUX version). It has 3 variable resistance inputs of which the first is normally a thermistor temperature sensor. There are also 2 digital inputs for monitoring manual buttons or alarm contacts, one of these (IN4) can be used to connect a Room Display.
Network: LON
AI: 3
DI: 2
DO: 4
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: water side 2 pipe
Strategy: thermic
Power: 230Vac


IQL15+/WT2/E/24VAC

Honeywell IQL15 Controllers

The IQL15+ is a terminal unit controller which can be networked using a LonWorks network. It can communicate with other IQLs and LonMark devices via the LonWorks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 3 relay outputs (normally to control fan speed), and 4 triac outputs (normally to control valves or dampers). A fourth relay is used either as an electric heater output (/E version) or as an auxiliary contact output (/AUX version). It has 3 variable resistance inputs of which the first is normally a thermistor temperature sensor. There are also 2 digital inputs for monitoring manual buttons or alarm contacts, one of these (IN4) can be used to connect a Room Display.
Network: LON
AI: 3
DI: 2
DO: 4
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: water side 2 pipe
Strategy: thermic
Power: 24Vac


IQL15+/WT4/E/230

Honeywell IQL15 Controllers

The IQL15+ is a terminal unit controller which can be networked using a LonWorks network. It can communicate with other IQLs and LonMark devices via the LonWorks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 3 relay outputs (normally to control fan speed), and 4 triac outputs (normally to control valves or dampers). A fourth relay is used either as an electric heater output (/E version) or as an auxiliary contact output (/AUX version). It has 3 variable resistance inputs of which the first is normally a thermistor temperature sensor. There are also 2 digital inputs for monitoring manual buttons or alarm contacts, one of these (IN4) can be used to connect a Room Display.
Network: LON
AI: 3
DI: 2
DO: 4
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: water side 4 pipe
Strategy: thermic
Power: 230Vac


IQL15+/WT4/E/24VAC

Honeywell IQL15 Controllers

The IQL15+ is a terminal unit controller which can be networked using a LonWorks network. It can communicate with other IQLs and LonMark devices via the LonWorks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 3 relay outputs (normally to control fan speed), and 4 triac outputs (normally to control valves or dampers). A fourth relay is used either as an electric heater output (/E version) or as an auxiliary contact output (/AUX version). It has 3 variable resistance inputs of which the first is normally a thermistor temperature sensor. There are also 2 digital inputs for monitoring manual buttons or alarm contacts, one of these (IN4) can be used to connect a Room Display.
Network: LON
AI: 3
DI: 2
DO: 4
Triac: 4
Comments: analogue input: thermistor only

Controllers
Application: water side 4 pipe
Strategy: thermic
Power: 24Vac


IQL16/AHU/230

Honeywell IQL16 Controllers

The IQL16 is a terminal unit controller which can be networked using LonWorks network. It can communicate with other IQLs and LonMark devices via the Lonworks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 3 relay outputs (normally to control fan speed), and two triac outputs and two 0 to 10 V analogue outputs (normally to control valves or dampers). It has 3 variable resistance inputs of which the first is normally a thermistor temperature sensor. There are also 2 digital inputs for monitoring manual buttons or alarm contacts.
Network: LON
AI: 3
DI: 2
AO: 2
DO: 3
Triac: 2
Comments: analogue input: thermistor only
Application: Air Handling Unit

Controllers
Power: 230Vac


IQL16/AHU/24VAC

Honeywell IQL16 Controllers

The IQL16 is a terminal unit controller which can be networked using LonWorks network. It can communicate with other IQLs and LonMark devices via the Lonworks network, and with IQ system networked devices via a 3XTEND/EINC L. It has 3 relay outputs (normally to control fan speed), and two triac outputs and two 0 to 10 V analogue outputs (normally to control valves or dampers). It has 3 variable resistance inputs of which the first is normally a thermistor temperature sensor. There are also 2 digital inputs for monitoring manual buttons or alarm contacts.
Network: LON
AI: 3
DI: 2
AO: 2
DO: 3
Triac: 2
Comments: analogue input: thermistor only
Application: Air Handling Unit

Controllers
Power: 24Vac


IQVIEW/NDP ADAPTOR PLATE

Honeywell IQView Touch Screen Display
Accessories

Adapter Plate to convert from NDP to IQ View



IQVIEW/RPM/24

Honeywell IQView Touch Screen Display

The IQView is a touch screen display which provides a self configuring user interface to the IQ system. The IQView software presents the user with the familiar Windows operating environment. System access is provided via a navigator tree, enabling controller selection, and hence access to modules, graphs, alarms, and timezones.
Serial comm.: RS232
Ethernet, current loop Lan, RS232 connection options
24 Vac, or 28 to 36 Vdc supply
Surface or Rear panel mount versions
Auto-learns network when connected
8 users with configurable access rights plus full access user (Admin.)
View of inputs, outputs, directories, alarms, logs
Adjustment of knobs, switches, time zones, time
Model: Colour
Network: TCP/IP + Trend LAN


Mounting: Rear Panel Mount


IQVIEW/SM/24

Honeywell IQView Touch Screen Display

The IQView is a touch screen display which provides a self configuring user interface to the IQ system. The IQView software presents the user with the familiar Windows operating environment. System access is provided via a navigator tree, enabling controller selection, and hence access to modules, graphs, alarms, and timezones.
Serial comm.: RS232
Ethernet, current loop Lan, RS232 connection options
24 Vac, or 28 to 36 Vdc supply
Surface or Rear panel mount versions
Auto-learns network when connected
8 users with configurable access rights plus full access user (Admin.)
View of inputs, outputs, directories, alarms, logs
Adjustment of knobs, switches, time zones, time
Model: Colour
Network: TCP/IP + Trend LAN


Mounting: Surface Mount


IQVIEW4/24

Honeywell IQ21x Controllers
Accessories

IQView4 Display Panel including 3m (9' 10") RJ11 to RJ11 RS232 cable



ITEM/LITH CELL

Honeywell Batteries, ITEM

Replacement Lithium batteries for IQ2xx series controllers
Batteries: LM2450 (tray of 20)


K15G31F

Honeywell Solenoid valves for gas, liquid gas/fuel K G31M, K G31F

The 2/2-way valves of the K-series can be used for all gases according to DVGW-data sheet G 260, for liquid gas in liquid phase (up to DN25) and for fuel oil. No minimum differential pressure is necessary.
Valve application: liquid gas
Materials: Casing: Bronze Rg 5 to DIN1705 Internal parts: Brass (CuZn40Pb) and corrosion-resistant steel Piston seal: Buna rubber (NBR) Nozzle seal: Buna rubber (NBR) Static seal: Buna rubber (NBR)
Media temp.: -15...60C
Ambient temperature: -15...60C
Operating mode: normally closed
The valves must be actuated approx. 5 - 10 times per month to prevent possible sticking of the piston. Other supply voltage on request.
Power supply: 230V 50Hz
Certificates: CE-0085AN0072 according to DIN EN 161, DIN 3394, P.1
CE-0085AN0074 according to DIN EN 161
5S038/02 according to DIN EN 264
5S039/02 according to DIN EN 264
5SO40/02 according to DIN EN 264
CE-0035BN0022 according to PED
CE-0035BN0023 according to PED
CE-0035BN0024 according to PED

Flange connection
DN size: 15mm
Kvs value: 4
Nominal pressure: PN40
Working range: 0...25bar
Connections: flange
Class: B


K15G31M

Honeywell Solenoid valves for gas, liquid gas/fuel K G31M, K G31F

The 2/2-way valves of the K-series can be used for all gases according to DVGW-data sheet G 260, for liquid gas in liquid phase (up to DN25) and for fuel oil. No minimum differential pressure is necessary.
Valve application: liquid gas
Materials: Casing: Bronze Rg 5 to DIN1705 Internal parts: Brass (CuZn40Pb) and corrosion-resistant steel Piston seal: Buna rubber (NBR) Nozzle seal: Buna rubber (NBR) Static seal: Buna rubber (NBR)
Media temp.: -15...60C
Ambient temperature: -15...60C
Operating mode: normally closed
The valves must be actuated approx. 5 - 10 times per month to prevent possible sticking of the piston. Other supply voltage on request.
Power supply: 230V 50Hz
Certificates: CE-0085AN0072 according to DIN EN 161, DIN 3394, P.1
CE-0085AN0074 according to DIN EN 161
5S038/02 according to DIN EN 264
5S039/02 according to DIN EN 264
5SO40/02 according to DIN EN 264
CE-0035BN0022 according to PED
CE-0035BN0023 according to PED
CE-0035BN0024 according to PED

Socket connection
DN size: 15mm
Kvs value: 4
Nominal pressure: PN40
Working range: 0...4bar
Connections: G1/2
Class: B


K15G35F-EX

Honeywell Solenoid valves (Ex) for gas, liquid gas/fuel (Ex-K)

The 2/2-way valves of the K-series in Ex-version can be used for all gases according to DVGW-data sheet G 260, for liquid gas in liquid phase (up to DN25) and for fuel oil. No minimum differential pressure is necessary. Degree of Ex-protection: EEx de IIC T4 for Zone 1 (21) Gas and Dust.
Valve application: liquid gas
Materials: Casing: Bronze Rg 5 to DIN1705 Internal parts: Brass (CuZn40Pb) and corrosion-resistant steel Piston seal: Buna rubber (NBR) Nozzle seal: Buna rubber (NBR) Static seal: Buna rubber (NBR)
Media temp.: -15...60C
Ambient temperature: -15...60C
Operating mode: normally closed
The valves must be actuated approx. 5 - 10 times per month to prevent possible sticking of the piston. Other supply voltage on request.
Power supply: 230V 50Hz
Certificates: CE-0085AN0073 according to DIN EN 161, DIN 3394, P.1
CE-0085AN0075 according to DIN EN 161
5S038/02 according to DIN EN 264
5S039/02 according to DIN EN 264
5SO40/02 according to DIN EN 264
ATEX-approval No. PTB 04 ATEX 1026
CE-0035BN0022 according to PED
CE-0035BN0023 according to PED
CE-0035BN0024 according to PED

Flange connection
DN size: 15mm
Kvs value: 4
Nominal pressure: PN40
Working range: 0...25bar
Connections: flange
Class: B


K15G35M-EX

Honeywell Solenoid valves (Ex) for gas, liquid gas/fuel (Ex-K)

The 2/2-way valves of the K-series in Ex-version can be used for all gases according to DVGW-data sheet G 260, for liquid gas in liquid phase (up to DN25) and for fuel oil. No minimum differential pressure is necessary. Degree of Ex-protection: EEx de IIC T4 for Zone 1 (21) Gas and Dust.
Valve application: liquid gas
Materials: Casing: Bronze Rg 5 to DIN1705 Internal parts: Brass (CuZn40Pb) and corrosion-resistant steel Piston seal: Buna rubber (NBR) Nozzle seal: Buna rubber (NBR) Static seal: Buna rubber (NBR)
Media temp.: -15...60C
Ambient temperature: -15...60C
Operating mode: normally closed
The valves must be actuated approx. 5 - 10 times per month to prevent possible sticking of the piston. Other supply voltage on request.
Power supply: 230V 50Hz
Certificates: CE-0085AN0073 according to DIN EN 161, DIN 3394, P.1
CE-0085AN0075 according to DIN EN 161
5S038/02 according to DIN EN 264
5S039/02 according to DIN EN 264
5SO40/02 according to DIN EN 264
ATEX-approval No. PTB 04 ATEX 1026
CE-0035BN0022 according to PED
CE-0035BN0023 according to PED
CE-0035BN0024 according to PED

Socket connection
DN size: 15mm
Kvs value: 4
Nominal pressure: PN40
Working range: 0...4bar
Connections: G1/2
Class: B


K20G31F

Honeywell Solenoid valves for gas, liquid gas/fuel K G31M, K G31F

The 2/2-way valves of the K-series can be used for all gases according to DVGW-data sheet G 260, for liquid gas in liquid phase (up to DN25) and for fuel oil. No minimum differential pressure is necessary.
Valve application: liquid gas
Materials: Casing: Bronze Rg 5 to DIN1705 Internal parts: Brass (CuZn40Pb) and corrosion-resistant steel Piston seal: Buna rubber (NBR) Nozzle seal: Buna rubber (NBR) Static seal: Buna rubber (NBR)
Media temp.: -15...60C
Ambient temperature: -15...60C
Operating mode: normally closed
The valves must be actuated approx. 5 - 10 times per month to prevent possible sticking of the piston. Other supply voltage on request.
Power supply: 230V 50Hz
Certificates: CE-0085AN0072 according to DIN EN 161, DIN 3394, P.1
CE-0085AN0074 according to DIN EN 161
5S038/02 according to DIN EN 264
5S039/02 according to DIN EN 264
5SO40/02 according to DIN EN 264
CE-0035BN0022 according to PED
CE-0035BN0023 according to PED
CE-0035BN0024 according to PED

Flange connection
DN size: 20mm
Kvs value: 4.8
Nominal pressure: PN40
Working range: 0...25bar
Connections: flange
Class: B


K20G31M

Honeywell Solenoid valves for gas, liquid gas/fuel K G31M, K G31F

The 2/2-way valves of the K-series can be used for all gases according to DVGW-data sheet G 260, for liquid gas in liquid phase (up to DN25) and for fuel oil. No minimum differential pressure is necessary.
Valve application: liquid gas
Materials: Casing: Bronze Rg 5 to DIN1705 Internal parts: Brass (CuZn40Pb) and corrosion-resistant steel Piston seal: Buna rubber (NBR) Nozzle seal: Buna rubber (NBR) Static seal: Buna rubber (NBR)
Media temp.: -15...60C
Ambient temperature: -15...60C
Operating mode: normally closed
The valves must be actuated approx. 5 - 10 times per month to prevent possible sticking of the piston. Other supply voltage on request.
Power supply: 230V 50Hz
Certificates: CE-0085AN0072 according to DIN EN 161, DIN 3394, P.1
CE-0085AN0074 according to DIN EN 161
5S038/02 according to DIN EN 264
5S039/02 according to DIN EN 264
5SO40/02 according to DIN EN 264
CE-0035BN0022 according to PED
CE-0035BN0023 according to PED
CE-0035BN0024 according to PED

Socket connection
DN size: 20mm
Kvs value: 4.8
Nominal pressure: PN40
Working range: 0...4bar
Connections: G3/4
Class: B


K20G35F-EX

Honeywell Solenoid valves (Ex) for gas, liquid gas/fuel (Ex-K)

The 2/2-way valves of the K-series in Ex-version can be used for all gases according to DVGW-data sheet G 260, for liquid gas in liquid phase (up to DN25) and for fuel oil. No minimum differential pressure is necessary. Degree of Ex-protection: EEx de IIC T4 for Zone 1 (21) Gas and Dust.
Valve application: liquid gas
Materials: Casing: Bronze Rg 5 to DIN1705 Internal parts: Brass (CuZn40Pb) and corrosion-resistant steel Piston seal: Buna rubber (NBR) Nozzle seal: Buna rubber (NBR) Static seal: Buna rubber (NBR)
Media temp.: -15...60C
Ambient temperature: -15...60C
Operating mode: normally closed
The valves must be actuated approx. 5 - 10 times per month to prevent possible sticking of the piston. Other supply voltage on request.
Power supply: 230V 50Hz
Certificates: CE-0085AN0073 according to DIN EN 161, DIN 3394, P.1
CE-0085AN0075 according to DIN EN 161
5S038/02 according to DIN EN 264
5S039/02 according to DIN EN 264
5SO40/02 according to DIN EN 264
ATEX-approval No. PTB 04 ATEX 1026
CE-0035BN0022 according to PED
CE-0035BN0023 according to PED
CE-0035BN0024 according to PED

Flange connection
DN size: 20mm
Kvs value: 4.8
Nominal pressure: PN40
Working range: 0...25bar
Connections: flange
Class: B


K20G35M-EX

Honeywell Solenoid valves (Ex) for gas, liquid gas/fuel (Ex-K)

The 2/2-way valves of the K-series in Ex-version can be used for all gases according to DVGW-data sheet G 260, for liquid gas in liquid phase (up to DN25) and for fuel oil. No minimum differential pressure is necessary. Degree of Ex-protection: EEx de IIC T4 for Zone 1 (21) Gas and Dust.
Valve application: liquid gas
Materials: Casing: Bronze Rg 5 to DIN1705 Internal parts: Brass (CuZn40Pb) and corrosion-resistant steel Piston seal: Buna rubber (NBR) Nozzle seal: Buna rubber (NBR) Static seal: Buna rubber (NBR)
Media temp.: -15...60C
Ambient temperature: -15...60C
Operating mode: normally closed
The valves must be actuated approx. 5 - 10 times per month to prevent possible sticking of the piston. Other supply voltage on request.
Power supply: 230V 50Hz
Certificates: CE-0085AN0073 according to DIN EN 161, DIN 3394, P.1
CE-0085AN0075 according to DIN EN 161
5S038/02 according to DIN EN 264
5S039/02 according to DIN EN 264
5SO40/02 according to DIN EN 264
ATEX-approval No. PTB 04 ATEX 1026
CE-0035BN0022 according to PED
CE-0035BN0023 according to PED
CE-0035BN0024 according to PED

Socket connection
DN size: 20mm
Kvs value: 4.8
Nominal pressure: PN40
Working range: 0...4bar
Connections: G3/4
Class: B


K25G31F

Honeywell Solenoid valves for gas, liquid gas/fuel K G31M, K G31F

The 2/2-way valves of the K-series can be used for all gases according to DVGW-data sheet G 260, for liquid gas in liquid phase (up to DN25) and for fuel oil. No minimum differential pressure is necessary.
Valve application: liquid gas
Materials: Casing: Bronze Rg 5 to DIN1705 Internal parts: Brass (CuZn40Pb) and corrosion-resistant steel Piston seal: Buna rubber (NBR) Nozzle seal: Buna rubber (NBR) Static seal: Buna rubber (NBR)
Media temp.: -15...60C
Ambient temperature: -15...60C
Operating mode: normally closed
The valves must be actuated approx. 5 - 10 times per month to prevent possible sticking of the piston. Other supply voltage on request.
Power supply: 230V 50Hz
Certificates: CE-0085AN0072 according to DIN EN 161, DIN 3394, P.1
CE-0085AN0074 according to DIN EN 161
5S038/02 according to DIN EN 264
5S039/02 according to DIN EN 264
5SO40/02 according to DIN EN 264
CE-0035BN0022 according to PED
CE-0035BN0023 according to PED
CE-0035BN0024 according to PED

Flange connection
DN size: 25mm
Kvs value: 10
Nominal pressure: PN40
Working range: 0...25bar
Connections: flange
Class: B


K25G35F-EX

Honeywell Solenoid valves (Ex) for gas, liquid gas/fuel (Ex-K)

The 2/2-way valves of the K-series in Ex-version can be used for all gases according to DVGW-data sheet G 260, for liquid gas in liquid phase (up to DN25) and for fuel oil. No minimum differential pressure is necessary. Degree of Ex-protection: EEx de IIC T4 for Zone 1 (21) Gas and Dust.
Valve application: liquid gas
Materials: Casing: Bronze Rg 5 to DIN1705 Internal parts: Brass (CuZn40Pb) and corrosion-resistant steel Piston seal: Buna rubber (NBR) Nozzle seal: Buna rubber (NBR) Static seal: Buna rubber (NBR)
Media temp.: -15...60C
Ambient temperature: -15...60C
Operating mode: normally closed
The valves must be actuated approx. 5 - 10 times per month to prevent possible sticking of the piston. Other supply voltage on request.
Power supply: 230V 50Hz
Certificates: CE-0085AN0073 according to DIN EN 161, DIN 3394, P.1
CE-0085AN0075 according to DIN EN 161
5S038/02 according to DIN EN 264
5S039/02 according to DIN EN 264
5SO40/02 according to DIN EN 264
ATEX-approval No. PTB 04 ATEX 1026
CE-0035BN0022 according to PED
CE-0035BN0023 according to PED
CE-0035BN0024 according to PED

Flange connection
DN size: 25mm
Kvs value: 10
Nominal pressure: PN40
Working range: 0...25bar
Connections: flange
Class: B


K32G31F

Honeywell Solenoid valves for gas, liquid gas/fuel K G31M, K G31F

The 2/2-way valves of the K-series can be used for all gases according to DVGW-data sheet G 260, for liquid gas in liquid phase (up to DN25) and for fuel oil. No minimum differential pressure is necessary.
Valve application: liquid gas
Materials: Casing: Bronze Rg 5 to DIN1705 Internal parts: Brass (CuZn40Pb) and corrosion-resistant steel Piston seal: Buna rubber (NBR) Nozzle seal: Buna rubber (NBR) Static seal: Buna rubber (NBR)
Media temp.: -15...60C
Ambient temperature: -15...60C
Operating mode: normally closed
The valves must be actuated approx. 5 - 10 times per month to prevent possible sticking of the piston. Other supply voltage on request.
Power supply: 230V 50Hz
Certificates: CE-0085AN0072 according to DIN EN 161, DIN 3394, P.1
CE-0085AN0074 according to DIN EN 161
5S038/02 according to DIN EN 264
5S039/02 according to DIN EN 264
5SO40/02 according to DIN EN 264
CE-0035BN0022 according to PED
CE-0035BN0023 according to PED
CE-0035BN0024 according to PED

Flange connection
DN size: 32mm
Kvs value: 13
Nominal pressure: PN40
Working range: 0...25bar
Connections: flange
Class: B


K32G35F-EX

Honeywell Solenoid valves (Ex) for gas, liquid gas/fuel (Ex-K)

The 2/2-way valves of the K-series in Ex-version can be used for all gases according to DVGW-data sheet G 260, for liquid gas in liquid phase (up to DN25) and for fuel oil. No minimum differential pressure is necessary. Degree of Ex-protection: EEx de IIC T4 for Zone 1 (21) Gas and Dust.
Valve application: liquid gas
Materials: Casing: Bronze Rg 5 to DIN1705 Internal parts: Brass (CuZn40Pb) and corrosion-resistant steel Piston seal: Buna rubber (NBR) Nozzle seal: Buna rubber (NBR) Static seal: Buna rubber (NBR)
Media temp.: -15...60C
Ambient temperature: -15...60C
Operating mode: normally closed
The valves must be actuated approx. 5 - 10 times per month to prevent possible sticking of the piston. Other supply voltage on request.
Power supply: 230V 50Hz
Certificates: CE-0085AN0073 according to DIN EN 161, DIN 3394, P.1
CE-0085AN0075 according to DIN EN 161
5S038/02 according to DIN EN 264
5S039/02 according to DIN EN 264
5SO40/02 according to DIN EN 264
ATEX-approval No. PTB 04 ATEX 1026
CE-0035BN0022 according to PED
CE-0035BN0023 according to PED
CE-0035BN0024 according to PED

Flange connection
DN size: 32mm
Kvs value: 13
Nominal pressure: PN40
Working range: 0...25bar
Connections: flange
Class: B


K40G31F

Honeywell Solenoid valves for gas, liquid gas/fuel K G31M, K G31F

The 2/2-way valves of the K-series can be used for all gases according to DVGW-data sheet G 260, for liquid gas in liquid phase (up to DN25) and for fuel oil. No minimum differential pressure is necessary.
Valve application: liquid gas
Materials: Casing: Bronze Rg 5 to DIN1705 Internal parts: Brass (CuZn40Pb) and corrosion-resistant steel Piston seal: Buna rubber (NBR) Nozzle seal: Buna rubber (NBR) Static seal: Buna rubber (NBR)
Media temp.: -15...60C
Ambient temperature: -15...60C
Operating mode: normally closed
The valves must be actuated approx. 5 - 10 times per month to prevent possible sticking of the piston. Other supply voltage on request.
Power supply: 230V 50Hz
Certificates: CE-0085AN0072 according to DIN EN 161, DIN 3394, P.1
CE-0085AN0074 according to DIN EN 161
5S038/02 according to DIN EN 264
5S039/02 according to DIN EN 264
5SO40/02 according to DIN EN 264
CE-0035BN0022 according to PED
CE-0035BN0023 according to PED
CE-0035BN0024 according to PED

Flange connection
DN size: 40mm
Kvs value: 34
Nominal pressure: PN25
Working range: 0...20bar
Connections: flange
Class: C


K40G35F-EX

Honeywell Solenoid valves (Ex) for gas, liquid gas/fuel (Ex-K)

The 2/2-way valves of the K-series in Ex-version can be used for all gases according to DVGW-data sheet G 260, for liquid gas in liquid phase (up to DN25) and for fuel oil. No minimum differential pressure is necessary. Degree of Ex-protection: EEx de IIC T4 for Zone 1 (21) Gas and Dust.
Valve application: liquid gas
Materials: Casing: Bronze Rg 5 to DIN1705 Internal parts: Brass (CuZn40Pb) and corrosion-resistant steel Piston seal: Buna rubber (NBR) Nozzle seal: Buna rubber (NBR) Static seal: Buna rubber (NBR)
Media temp.: -15...60C
Ambient temperature: -15...60C
Operating mode: normally closed
The valves must be actuated approx. 5 - 10 times per month to prevent possible sticking of the piston. Other supply voltage on request.
Power supply: 230V 50Hz
Certificates: CE-0085AN0073 according to DIN EN 161, DIN 3394, P.1
CE-0085AN0075 according to DIN EN 161
5S038/02 according to DIN EN 264
5S039/02 according to DIN EN 264
5SO40/02 according to DIN EN 264
ATEX-approval No. PTB 04 ATEX 1026
CE-0035BN0022 according to PED
CE-0035BN0023 according to PED
CE-0035BN0024 according to PED

Flange connection
DN size: 40mm
Kvs value: 34
Nominal pressure: PN25
Working range: 0...20bar
Connections: flange
Class: C


K43193737-001

Honeywell VAV control module, IRC, R7453E R7453F R7453G


Terminal cover (20 pieces)



K50G31F

Honeywell Solenoid valves for gas, liquid gas/fuel K G31M, K G31F

The 2/2-way valves of the K-series can be used for all gases according to DVGW-data sheet G 260, for liquid gas in liquid phase (up to DN25) and for fuel oil. No minimum differential pressure is necessary.
Valve application: liquid gas
Materials: Casing: Bronze Rg 5 to DIN1705 Internal parts: Brass (CuZn40Pb) and corrosion-resistant steel Piston seal: Buna rubber (NBR) Nozzle seal: Buna rubber (NBR) Static seal: Buna rubber (NBR)
Media temp.: -15...60C
Ambient temperature: -15...60C
Operating mode: normally closed
The valves must be actuated approx. 5 - 10 times per month to prevent possible sticking of the piston. Other supply voltage on request.
Power supply: 230V 50Hz
Certificates: CE-0085AN0072 according to DIN EN 161, DIN 3394, P.1
CE-0085AN0074 according to DIN EN 161
5S038/02 according to DIN EN 264
5S039/02 according to DIN EN 264
5SO40/02 according to DIN EN 264
CE-0035BN0022 according to PED
CE-0035BN0023 according to PED
CE-0035BN0024 according to PED

Flange connection
DN size: 50mm
Kvs value: 40
Nominal pressure: PN25
Working range: 0...20bar
Connections: flange
Class: C


K50G35F-EX

Honeywell Solenoid valves (Ex) for gas, liquid gas/fuel (Ex-K)

The 2/2-way valves of the K-series in Ex-version can be used for all gases according to DVGW-data sheet G 260, for liquid gas in liquid phase (up to DN25) and for fuel oil. No minimum differential pressure is necessary. Degree of Ex-protection: EEx de IIC T4 for Zone 1 (21) Gas and Dust.
Valve application: liquid gas
Materials: Casing: Bronze Rg 5 to DIN1705 Internal parts: Brass (CuZn40Pb) and corrosion-resistant steel Piston seal: Buna rubber (NBR) Nozzle seal: Buna rubber (NBR) Static seal: Buna rubber (NBR)
Media temp.: -15...60C
Ambient temperature: -15...60C
Operating mode: normally closed
The valves must be actuated approx. 5 - 10 times per month to prevent possible sticking of the piston. Other supply voltage on request.
Power supply: 230V 50Hz
Certificates: CE-0085AN0073 according to DIN EN 161, DIN 3394, P.1
CE-0085AN0075 according to DIN EN 161
5S038/02 according to DIN EN 264
5S039/02 according to DIN EN 264
5SO40/02 according to DIN EN 264
ATEX-approval No. PTB 04 ATEX 1026
CE-0035BN0022 according to PED
CE-0035BN0023 according to PED
CE-0035BN0024 according to PED

Flange connection
DN size: 50mm
Kvs value: 40
Nominal pressure: PN25
Working range: 0...20bar
Connections: flange
Class: C


KF21

Honeywell Air duct temperature sensor, Industrial/HVAC (KF)

The temperature sensors are designed for universal use in systems of machine construction, process control, HVAC, environmental and agricultural area.
Protection class: IP65
Temperature range: -30...150C
Mounting place: air duct
Immersion depth: max. 250mm


Temperature element: Pt100


KF31

Honeywell Air duct temperature sensor, Industrial/HVAC (KF)

The temperature sensors are designed for universal use in systems of machine construction, process control, HVAC, environmental and agricultural area.
Protection class: IP65
Temperature range: -30...150C
Mounting place: air duct
Immersion depth: max. 250mm


Temperature element: Pt1000


KIT/IQ23X/UPGRADE

Honeywell IQ233 Controller
Accessories

Extension cables for comms and power



KIT/NODE/IQ23X

Honeywell IQ233 Controller
Accessories

2 node plates and internal node cables



KIT/NODE/IQ24X

Honeywell IQ241 Controller accessories
Accessories

Retrofit kit to add node card to an IQ241



KIT/NODE/IQ25x

Honeywell IQ251 Controllers
Accessories

Retrofit kit to add node card to an IQ251



KTF20

Honeywell Water temperature sensor NTC, cable type, KTF20 DKF20

Watertight temperature sensor with sensor cartridge.
Protection class: IP64
KTF20-B (bulk of 50 sensors of Type KTF20)
Temperature range: -20...100C
Mounting place: universal
Immersion depth: min. 50mm
Applicable well length: 135mm
Sensing element (dia x L): 6.5mm|50mm
Cable length: 2m


Temperature element: NTC20k
Wiring terminals: 2


KTF20-B

Honeywell Water temperature sensor NTC, cable type, KTF20 DKF20

Watertight temperature sensor with sensor cartridge.
Protection class: IP64
KTF20-B (bulk of 50 sensors of Type KTF20)
Temperature range: -20...100C
Mounting place: universal
Immersion depth: min. 50mm
Applicable well length: 135mm
Sensing element (dia x L): 6.5mm|50mm
Cable length: 2m


Temperature element: NTC20k
Wiring terminals: 2


L15G31F

Honeywell Solenoid valves for hot water, steam, up to 120 degree (LG)

The 2/2-way valves of the LG-series are particularly suitable for use as stop and safety check valves in heating installations up to 120oC.The balanced mode of operation does not require a minimum differential pressure.
Valve application: gaseous/liquid
Materials: Casing: Bronze Rg 5 to DIN1705 Internal parts: Brass (CuZn) and corrosion-resistant steel Piston seal: Teflon (PTFE) Nozzle seal: Stainless steel cone Static seal: EPDM
Media temp.: 4...120C
Ambient temperature: 4...60C
Operating mode: normally closed
The valves must be actuated approx. 5 - 10 times per month to prevent possible sticking of the piston. Other supply voltage on request.
Power supply: 230V 50Hz
Certificates: 1F02204 according DIN 32730
1F02304 according DIN 32730
1F02404 according DIN 32730
CE-0035BN0060 according to PED
CE-0035BN0061 according to PED
CE-0035BN0062 according to PED

Flange connection
DN size: 15mm
Kvs value: 4
Nominal pressure: PN40
Working range: 0...25bar
Connections: flange


L15G31FK

Honeywell Solenoid valves for hot water, steam, up to 180 degree (LGK)

The 2/2-way valves of the LGK-series are particularly suitable for use as stop and safety check valves in heating installations up to 180oC. The balanced mode of operation does not require a minimum differential pressure.
Valve application: gaseous/liquid
Materials: Casing: Bronze Rg 5 to DIN1705 Internal parts: Brass (CuZn) and corrosion-resistant steel Piston seal: Teflon (PTFE) Nozzle seal: stainless steel cone Static seal: EPDM
Media temp.: 4...180C
Ambient temperature: 4...60C
Operating mode: normally closed
The valves must be actuated approx. 5 - 10 times per month to prevent possible sticking of the piston. Other supply voltage on request.
Power supply: 230V 50Hz
Certificates: 1F01904 according DIN 32730
1F02004 according DIN 32730
1F02104 according DIN 32730
CE-0035BN0060 according to PED
CE-0035BN0061 according to PED
CE-0035BN0062 according to PED

Flange connection
DN size: 15mm
Kvs value: 4
Nominal pressure: PN40
Working range: 0...20bar
Connections: flange


L15G31M

Honeywell Solenoid valves for hot water, steam, up to 120 degree (LG)

The 2/2-way valves of the LG-series are particularly suitable for use as stop and safety check valves in heating installations up to 120oC.The balanced mode of operation does not require a minimum differential pressure.
Valve application: gaseous/liquid
Materials: Casing: Bronze Rg 5 to DIN1705 Internal parts: Brass (CuZn) and corrosion-resistant steel Piston seal: Teflon (PTFE) Nozzle seal: Stainless steel cone Static seal: EPDM
Media temp.: 4...120C
Ambient temperature: 4...60C
Operating mode: normally closed
The valves must be actuated approx. 5 - 10 times per month to prevent possible sticking of the piston. Other supply voltage on request.
Power supply: 230V 50Hz
Certificates: 1F02204 according DIN 32730
1F02304 according DIN 32730
1F02404 according DIN 32730
CE-0035BN0060 according to PED
CE-0035BN0061 according to PED
CE-0035BN0062 according to PED

Socket connection
DN size: 15mm
Kvs value: 4
Nominal pressure: PN40
Working range: 0...25bar
Connections: G1/2


L15G31MK

Honeywell Solenoid valves for hot water, steam, up to 180 degree (LGK)

The 2/2-way valves of the LGK-series are particularly suitable for use as stop and safety check valves in heating installations up to 180oC. The balanced mode of operation does not require a minimum differential pressure.
Valve application: gaseous/liquid
Materials: Casing: Bronze Rg 5 to DIN1705 Internal parts: Brass (CuZn) and corrosion-resistant steel Piston seal: Teflon (PTFE) Nozzle seal: stainless steel cone Static seal: EPDM
Media temp.: 4...180C
Ambient temperature: 4...60C
Operating mode: normally closed
The valves must be actuated approx. 5 - 10 times per month to prevent possible sticking of the piston. Other supply voltage on request.
Power supply: 230V 50Hz
Certificates: 1F01904 according DIN 32730
1F02004 according DIN 32730
1F02104 according DIN 32730
CE-0035BN0060 according to PED
CE-0035BN0061 according to PED
CE-0035BN0062 according to PED

Socket connection
DN size: 15mm
Kvs value: 4
Nominal pressure: PN40
Working range: 0...20bar
Connections: G1/2


L20G31F

Honeywell Solenoid valves for hot water, steam, up to 120 degree (LG)

The 2/2-way valves of the LG-series are particularly suitable for use as stop and safety check valves in heating installations up to 120oC.The balanced mode of operation does not require a minimum differential pressure.
Valve application: gaseous/liquid
Materials: Casing: Bronze Rg 5 to DIN1705 Internal parts: Brass (CuZn) and corrosion-resistant steel Piston seal: Teflon (PTFE) Nozzle seal: Stainless steel cone Static seal: EPDM
Media temp.: 4...120C
Ambient temperature: 4...60C
Operating mode: normally closed
The valves must be actuated approx. 5 - 10 times per month to prevent possible sticking of the piston. Other supply voltage on request.
Power supply: 230V 50Hz
Certificates: 1F02204 according DIN 32730
1F02304 according DIN 32730
1F02404 according DIN 32730
CE-0035BN0060 according to PED
CE-0035BN0061 according to PED
CE-0035BN0062 according to PED

Flange connection
DN size: 20mm
Kvs value: 4.8
Nominal pressure: PN40
Working range: 0...25bar
Connections: flange


L20G31FK

Honeywell Solenoid valves for hot water, steam, up to 180 degree (LGK)

The 2/2-way valves of the LGK-series are particularly suitable for use as stop and safety check valves in heating installations up to 180oC. The balanced mode of operation does not require a minimum differential pressure.
Valve application: gaseous/liquid
Materials: Casing: Bronze Rg 5 to DIN1705 Internal parts: Brass (CuZn) and corrosion-resistant steel Piston seal: Teflon (PTFE) Nozzle seal: stainless steel cone Static seal: EPDM
Media temp.: 4...180C
Ambient temperature: 4...60C
Operating mode: normally closed
The valves must be actuated approx. 5 - 10 times per month to prevent possible sticking of the piston. Other supply voltage on request.
Power supply: 230V 50Hz
Certificates: 1F01904 according DIN 32730
1F02004 according DIN 32730
1F02104 according DIN 32730
CE-0035BN0060 according to PED
CE-0035BN0061 according to PED
CE-0035BN0062 according to PED

Flange connection
DN size: 20mm
Kvs value: 4.8
Nominal pressure: PN40
Working range: 0...20bar
Connections: flange


L20G31M

Honeywell Solenoid valves for hot water, steam, up to 120 degree (LG)

The 2/2-way valves of the LG-series are particularly suitable for use as stop and safety check valves in heating installations up to 120oC.The balanced mode of operation does not require a minimum differential pressure.
Valve application: gaseous/liquid
Materials: Casing: Bronze Rg 5 to DIN1705 Internal parts: Brass (CuZn) and corrosion-resistant steel Piston seal: Teflon (PTFE) Nozzle seal: Stainless steel cone Static seal: EPDM
Media temp.: 4...120C
Ambient temperature: 4...60C
Operating mode: normally closed
The valves must be actuated approx. 5 - 10 times per month to prevent possible sticking of the piston. Other supply voltage on request.
Power supply: 230V 50Hz
Certificates: 1F02204 according DIN 32730
1F02304 according DIN 32730
1F02404 according DIN 32730
CE-0035BN0060 according to PED
CE-0035BN0061 according to PED
CE-0035BN0062 according to PED

Socket connection
DN size: 20mm
Kvs value: 4.8
Nominal pressure: PN40
Working range: 0...25bar
Connections: G3/4


L20G31MK

Honeywell Solenoid valves for hot water, steam, up to 180 degree (LGK)

The 2/2-way valves of the LGK-series are particularly suitable for use as stop and safety check valves in heating installations up to 180oC. The balanced mode of operation does not require a minimum differential pressure.
Valve application: gaseous/liquid
Materials: Casing: Bronze Rg 5 to DIN1705 Internal parts: Brass (CuZn) and corrosion-resistant steel Piston seal: Teflon (PTFE) Nozzle seal: stainless steel cone Static seal: EPDM
Media temp.: 4...180C
Ambient temperature: 4...60C
Operating mode: normally closed
The valves must be actuated approx. 5 - 10 times per month to prevent possible sticking of the piston. Other supply voltage on request.
Power supply: 230V 50Hz
Certificates: 1F01904 according DIN 32730
1F02004 according DIN 32730
1F02104 according DIN 32730
CE-0035BN0060 according to PED
CE-0035BN0061 according to PED
CE-0035BN0062 according to PED

Socket connection
DN size: 20mm
Kvs value: 4.8
Nominal pressure: PN40
Working range: 0...20bar
Connections: G3/4


L25G31F

Honeywell Solenoid valves for hot water, steam, up to 120 degree (LG)

The 2/2-way valves of the LG-series are particularly suitable for use as stop and safety check valves in heating installations up to 120oC.The balanced mode of operation does not require a minimum differential pressure.
Valve application: gaseous/liquid
Materials: Casing: Bronze Rg 5 to DIN1705 Internal parts: Brass (CuZn) and corrosion-resistant steel Piston seal: Teflon (PTFE) Nozzle seal: Stainless steel cone Static seal: EPDM
Media temp.: 4...120C
Ambient temperature: 4...60C
Operating mode: normally closed
The valves must be actuated approx. 5 - 10 times per month to prevent possible sticking of the piston. Other supply voltage on request.
Power supply: 230V 50Hz
Certificates: 1F02204 according DIN 32730
1F02304 according DIN 32730
1F02404 according DIN 32730
CE-0035BN0060 according to PED
CE-0035BN0061 according to PED
CE-0035BN0062 according to PED

Flange connection
DN size: 25mm
Kvs value: 10
Nominal pressure: PN40
Working range: 0...20bar
Connections: flange


L25G31FK

Honeywell Solenoid valves for hot water, steam, up to 180 degree (LGK)

The 2/2-way valves of the LGK-series are particularly suitable for use as stop and safety check valves in heating installations up to 180oC. The balanced mode of operation does not require a minimum differential pressure.
Valve application: gaseous/liquid
Materials: Casing: Bronze Rg 5 to DIN1705 Internal parts: Brass (CuZn) and corrosion-resistant steel Piston seal: Teflon (PTFE) Nozzle seal: stainless steel cone Static seal: EPDM
Media temp.: 4...180C
Ambient temperature: 4...60C
Operating mode: normally closed
The valves must be actuated approx. 5 - 10 times per month to prevent possible sticking of the piston. Other supply voltage on request.
Power supply: 230V 50Hz
Certificates: 1F01904 according DIN 32730
1F02004 according DIN 32730
1F02104 according DIN 32730
CE-0035BN0060 according to PED
CE-0035BN0061 according to PED
CE-0035BN0062 according to PED

Flange connection
DN size: 25mm
Kvs value: 10
Nominal pressure: PN40
Working range: 0...16bar
Connections: flange


L25G31M

Honeywell Solenoid valves for hot water, steam, up to 120 degree (LG)

The 2/2-way valves of the LG-series are particularly suitable for use as stop and safety check valves in heating installations up to 120oC.The balanced mode of operation does not require a minimum differential pressure.
Valve application: gaseous/liquid
Materials: Casing: Bronze Rg 5 to DIN1705 Internal parts: Brass (CuZn) and corrosion-resistant steel Piston seal: Teflon (PTFE) Nozzle seal: Stainless steel cone Static seal: EPDM
Media temp.: 4...120C
Ambient temperature: 4...60C
Operating mode: normally closed
The valves must be actuated approx. 5 - 10 times per month to prevent possible sticking of the piston. Other supply voltage on request.
Power supply: 230V 50Hz
Certificates: 1F02204 according DIN 32730
1F02304 according DIN 32730
1F02404 according DIN 32730
CE-0035BN0060 according to PED
CE-0035BN0061 according to PED
CE-0035BN0062 according to PED

Socket connection
DN size: 25mm
Kvs value: 10
Nominal pressure: PN40
Working range: 0...20bar
Connections: G1


L25G31MK

Honeywell Solenoid valves for hot water, steam, up to 180 degree (LGK)

The 2/2-way valves of the LGK-series are particularly suitable for use as stop and safety check valves in heating installations up to 180oC. The balanced mode of operation does not require a minimum differential pressure.
Valve application: gaseous/liquid
Materials: Casing: Bronze Rg 5 to DIN1705 Internal parts: Brass (CuZn) and corrosion-resistant steel Piston seal: Teflon (PTFE) Nozzle seal: stainless steel cone Static seal: EPDM
Media temp.: 4...180C
Ambient temperature: 4...60C
Operating mode: normally closed
The valves must be actuated approx. 5 - 10 times per month to prevent possible sticking of the piston. Other supply voltage on request.
Power supply: 230V 50Hz
Certificates: 1F01904 according DIN 32730
1F02004 according DIN 32730
1F02104 according DIN 32730
CE-0035BN0060 according to PED
CE-0035BN0061 according to PED
CE-0035BN0062 according to PED

Socket connection
DN size: 25mm
Kvs value: 10
Nominal pressure: PN40
Working range: 0...16bar
Connections: G1


L32G31F

Honeywell Solenoid valves for hot water, steam, up to 120 degree (LG)

The 2/2-way valves of the LG-series are particularly suitable for use as stop and safety check valves in heating installations up to 120oC.The balanced mode of operation does not require a minimum differential pressure.
Valve application: gaseous/liquid
Materials: Casing: Bronze Rg 5 to DIN1705 Internal parts: Brass (CuZn) and corrosion-resistant steel Piston seal: Teflon (PTFE) Nozzle seal: Stainless steel cone Static seal: EPDM
Media temp.: 4...120C
Ambient temperature: 4...60C
Operating mode: normally closed
The valves must be actuated approx. 5 - 10 times per month to prevent possible sticking of the piston. Other supply voltage on request.
Power supply: 230V 50Hz
Certificates: 1F02204 according DIN 32730
1F02304 according DIN 32730
1F02404 according DIN 32730
CE-0035BN0060 according to PED
CE-0035BN0061 according to PED
CE-0035BN0062 according to PED

Flange connection
DN size: 32mm
Kvs value: 13
Nominal pressure: PN40
Working range: 0...20bar
Connections: flange


L32G31FK

Honeywell Solenoid valves for hot water, steam, up to 180 degree (LGK)

The 2/2-way valves of the LGK-series are particularly suitable for use as stop and safety check valves in heating installations up to 180oC. The balanced mode of operation does not require a minimum differential pressure.
Valve application: gaseous/liquid
Materials: Casing: Bronze Rg 5 to DIN1705 Internal parts: Brass (CuZn) and corrosion-resistant steel Piston seal: Teflon (PTFE) Nozzle seal: stainless steel cone Static seal: EPDM
Media temp.: 4...180C
Ambient temperature: 4...60C
Operating mode: normally closed
The valves must be actuated approx. 5 - 10 times per month to prevent possible sticking of the piston. Other supply voltage on request.
Power supply: 230V 50Hz
Certificates: 1F01904 according DIN 32730
1F02004 according DIN 32730
1F02104 according DIN 32730
CE-0035BN0060 according to PED
CE-0035BN0061 according to PED
CE-0035BN0062 according to PED

Flange connection
DN size: 32mm
Kvs value: 13
Nominal pressure: PN40
Working range: 0...16bar
Connections: flange


L32G31M

Honeywell Solenoid valves for hot water, steam, up to 120 degree (LG)

The 2/2-way valves of the LG-series are particularly suitable for use as stop and safety check valves in heating installations up to 120oC.The balanced mode of operation does not require a minimum differential pressure.
Valve application: gaseous/liquid
Materials: Casing: Bronze Rg 5 to DIN1705 Internal parts: Brass (CuZn) and corrosion-resistant steel Piston seal: Teflon (PTFE) Nozzle seal: Stainless steel cone Static seal: EPDM
Media temp.: 4...120C
Ambient temperature: 4...60C
Operating mode: normally closed
The valves must be actuated approx. 5 - 10 times per month to prevent possible sticking of the piston. Other supply voltage on request.
Power supply: 230V 50Hz
Certificates: 1F02204 according DIN 32730
1F02304 according DIN 32730
1F02404 according DIN 32730
CE-0035BN0060 according to PED
CE-0035BN0061 according to PED
CE-0035BN0062 according to PED

Socket connection
DN size: 32mm
Kvs value: 13
Nominal pressure: PN40
Working range: 0...20bar
Connections: G1 1/4


L32G31MK

Honeywell Solenoid valves for hot water, steam, up to 180 degree (LGK)

The 2/2-way valves of the LGK-series are particularly suitable for use as stop and safety check valves in heating installations up to 180oC. The balanced mode of operation does not require a minimum differential pressure.
Valve application: gaseous/liquid
Materials: Casing: Bronze Rg 5 to DIN1705 Internal parts: Brass (CuZn) and corrosion-resistant steel Piston seal: Teflon (PTFE) Nozzle seal: stainless steel cone Static seal: EPDM
Media temp.: 4...180C
Ambient temperature: 4...60C
Operating mode: normally closed
The valves must be actuated approx. 5 - 10 times per month to prevent possible sticking of the piston. Other supply voltage on request.
Power supply: 230V 50Hz
Certificates: 1F01904 according DIN 32730
1F02004 according DIN 32730
1F02104 according DIN 32730
CE-0035BN0060 according to PED
CE-0035BN0061 according to PED
CE-0035BN0062 according to PED

Socket connection
DN size: 32mm
Kvs value: 13
Nominal pressure: PN40
Working range: 0...16bar
Connections: G1 1/4


L4064K1006/U

Honeywell Hot air safety thermostat with immersion pipe, L4064K1006

Line voltage safety thermostat for air handling units with electrical heaters, or direct fired heaters.
Switch function/capacity: SPST 230 Vac Micro switch, 4 A
Mechanical lock/reset: with hand reset
Temp. setpoint range: 10...75C
Media temp.: ...170C
Ambient temperature: ...80C
Temperature element: bimetal
Mounting place: air duct
Immersion depth: 290mm


L40G31F

Honeywell Solenoid valves for hot water, steam, up to 120 degree (LG)

The 2/2-way valves of the LG-series are particularly suitable for use as stop and safety check valves in heating installations up to 120oC.The balanced mode of operation does not require a minimum differential pressure.
Valve application: gaseous/liquid
Materials: Casing: Bronze Rg 5 to DIN1705 Internal parts: Brass (CuZn) and corrosion-resistant steel Piston seal: Teflon (PTFE) Nozzle seal: Stainless steel cone Static seal: EPDM
Media temp.: 4...120C
Ambient temperature: 4...60C
Operating mode: normally closed
The valves must be actuated approx. 5 - 10 times per month to prevent possible sticking of the piston. Other supply voltage on request.
Power supply: 230V 50Hz
Certificates: 1F02204 according DIN 32730
1F02304 according DIN 32730
1F02404 according DIN 32730
CE-0035BN0060 according to PED
CE-0035BN0061 according to PED
CE-0035BN0062 according to PED

Flange connection
DN size: 40mm
Kvs value: 34
Nominal pressure: PN25
Working range: 0...16bar
Connections: flange


L40G31FK

Honeywell Solenoid valves for hot water, steam, up to 180 degree (LGK)

The 2/2-way valves of the LGK-series are particularly suitable for use as stop and safety check valves in heating installations up to 180oC. The balanced mode of operation does not require a minimum differential pressure.
Valve application: gaseous/liquid
Materials: Casing: Bronze Rg 5 to DIN1705 Internal parts: Brass (CuZn) and corrosion-resistant steel Piston seal: Teflon (PTFE) Nozzle seal: stainless steel cone Static seal: EPDM
Media temp.: 4...180C
Ambient temperature: 4...60C
Operating mode: normally closed
The valves must be actuated approx. 5 - 10 times per month to prevent possible sticking of the piston. Other supply voltage on request.
Power supply: 230V 50Hz
Certificates: 1F01904 according DIN 32730
1F02004 according DIN 32730
1F02104 according DIN 32730
CE-0035BN0060 according to PED
CE-0035BN0061 according to PED
CE-0035BN0062 according to PED

Flange connection
DN size: 40mm
Kvs value: 34
Nominal pressure: PN25
Working range: 0...12bar
Connections: flange


L50G31F

Honeywell Solenoid valves for hot water, steam, up to 120 degree (LG)

The 2/2-way valves of the LG-series are particularly suitable for use as stop and safety check valves in heating installations up to 120oC.The balanced mode of operation does not require a minimum differential pressure.
Valve application: gaseous/liquid
Materials: Casing: Bronze Rg 5 to DIN1705 Internal parts: Brass (CuZn) and corrosion-resistant steel Piston seal: Teflon (PTFE) Nozzle seal: Stainless steel cone Static seal: EPDM
Media temp.: 4...120C
Ambient temperature: 4...60C
Operating mode: normally closed
The valves must be actuated approx. 5 - 10 times per month to prevent possible sticking of the piston. Other supply voltage on request.
Power supply: 230V 50Hz
Certificates: 1F02204 according DIN 32730
1F02304 according DIN 32730
1F02404 according DIN 32730
CE-0035BN0060 according to PED
CE-0035BN0061 according to PED
CE-0035BN0062 according to PED

Flange connection
DN size: 50mm
Kvs value: 40
Nominal pressure: PN25
Working range: 0...16bar
Connections: flange


L50G31FK

Honeywell Solenoid valves for hot water, steam, up to 180 degree (LGK)

The 2/2-way valves of the LGK-series are particularly suitable for use as stop and safety check valves in heating installations up to 180oC. The balanced mode of operation does not require a minimum differential pressure.
Valve application: gaseous/liquid
Materials: Casing: Bronze Rg 5 to DIN1705 Internal parts: Brass (CuZn) and corrosion-resistant steel Piston seal: Teflon (PTFE) Nozzle seal: stainless steel cone Static seal: EPDM
Media temp.: 4...180C
Ambient temperature: 4...60C
Operating mode: normally closed
The valves must be actuated approx. 5 - 10 times per month to prevent possible sticking of the piston. Other supply voltage on request.
Power supply: 230V 50Hz
Certificates: 1F01904 according DIN 32730
1F02004 according DIN 32730
1F02104 according DIN 32730
CE-0035BN0060 according to PED
CE-0035BN0061 according to PED
CE-0035BN0062 according to PED

Flange connection
DN size: 50mm
Kvs value: 40
Nominal pressure: PN25
Working range: 0...12bar
Connections: flange


L7022A1002

Honeywell Air duct temperature sensor Balco, average measurement, L7022A1002

The coil length for avarage measurement is 8,5 meter.
Temperature element: NTC10k fast
Temperature range: -30...90C
Mounting place: air duct
Wiring terminals: 2


L7087A1046

Honeywell Air duct temperature sensor, Balco, L7087A

Protection class: IP42
Temperature element: NTC10k fast
Temperature range: -40...130C
Mounting place: air duct
Wiring terminals: 2


Immersion depth: 125mm


L7087A1053

Honeywell Water temperature sensor, Balco, L7087A1053

Immersion sensor with well.
Protection class: IP54
Temperature element: NTC10k fast
Temperature range: -40...120C
Mounting place: in pipe
Immersion well material: copper
Immersion well thread: R1/2"
Immersion depth: 95mm
Wiring terminals: 2


L7087A1061

Honeywell Air duct temperature sensor, Balco, L7087A

Protection class: IP42
Temperature element: NTC10k fast
Temperature range: -40...130C
Mounting place: air duct
Wiring terminals: 2


Immersion depth: 450mm


LF-MF

Honeywell Water temperature transmitter, well, VFV
Flanges

Mounting flange for air-duct application (10 pieces)



LF0-1B54

Honeywell Air duct temperature sensor, Pt, LF0 LF00

Humidity 5..95 %rh, non condensing.
Temperature range: -40...110C
Mounting place: air duct
Wiring terminals: 2
Protection class: IP54


Temperature element: Pt100
Immersion depth: 150mm


LF00-1B54

Honeywell Air duct temperature sensor, Pt, LF0 LF00

Humidity 5..95 %rh, non condensing.
Temperature range: -40...110C
Mounting place: air duct
Wiring terminals: 2
Protection class: IP54


Temperature element: Pt1000
Immersion depth: 150mm


LF00-3B54

Honeywell Air duct temperature sensor, Pt, LF0 LF00

Humidity 5..95 %rh, non condensing.
Temperature range: -40...110C
Mounting place: air duct
Wiring terminals: 2
Protection class: IP54


Temperature element: Pt1000
Immersion depth: 300mm


LF01-1B54

Honeywell Air duct temperature sensor, Ni1000, LF01

Temperature element: Ni1000
Temperature range: -40...110C
Mounting place: air duct
Wiring terminals: 2
Cable length: 2m
Humidity 5..95 %rh, non condensing.


Protection class: IP54
Immersion depth: 150mm


LF01-1B65

Honeywell Air duct temperature sensor, Ni1000, LF01

Temperature element: Ni1000
Temperature range: -40...110C
Mounting place: air duct
Wiring terminals: 2
Cable length: 2m
Humidity 5..95 %rh, non condensing.


Protection class: IP65
Immersion depth: 150mm


LF01-3B54

Honeywell Air duct temperature sensor, Ni1000, LF01

Temperature element: Ni1000
Temperature range: -40...110C
Mounting place: air duct
Wiring terminals: 2
Cable length: 2m
Humidity 5..95 %rh, non condensing.


Protection class: IP54
Immersion depth: 300mm


LF01-3B65

Honeywell Air duct temperature sensor, Ni1000, LF01

Temperature element: Ni1000
Temperature range: -40...110C
Mounting place: air duct
Wiring terminals: 2
Cable length: 2m
Humidity 5..95 %rh, non condensing.


Protection class: IP65
Immersion depth: 300mm


LF10

Honeywell Air duct temperature sensor, NTC, LF10 LF20

Humidity 5..95 %rh, non condensing.
Temperature range: -40...80C
Mounting place: air duct
Immersion depth: 300mm
Wiring terminals: 2


Temperature element: NTC10k
Cable length: no
Protection class: IP54


LF10-3B54

Honeywell Air duct temperature sensor, NTC

Humidity 5..95 %rh, non condensing.
Temperature range: -40...110C
Mounting place: air duct
Immersion depth: 300mm
Wiring terminals: 2


Temperature element: NTC10k
Protection class: IP54


LF20

Honeywell Air duct temperature sensor, NTC, LF10 LF20

Humidity 5..95 %rh, non condensing.
Temperature range: -40...80C
Mounting place: air duct
Immersion depth: 300mm
Wiring terminals: 2


Temperature element: NTC20k
Cable length: no
Protection class: IP30


LF20-3B54

Honeywell Air duct temperature sensor, NTC

Humidity 5..95 %rh, non condensing.
Temperature range: -40...110C
Mounting place: air duct
Immersion depth: 300mm
Wiring terminals: 2


Temperature element: NTC20k
Protection class: IP54


LF20-3B65

Honeywell Air duct temperature sensor, NTC

Humidity 5..95 %rh, non condensing.
Temperature range: -40...110C
Mounting place: air duct
Immersion depth: 300mm
Wiring terminals: 2


Temperature element: NTC20k
Protection class: IP65


LF20-C

Honeywell Air duct temperature sensor, NTC, LF10 LF20

Humidity 5..95 %rh, non condensing.
Temperature range: -40...80C
Mounting place: air duct
Immersion depth: 300mm
Wiring terminals: 2


Temperature element: NTC20k
Cable length: 5m
Protection class: IP65


LF20-L

Honeywell Air duct temperature sensor NTC, LON, LF20-L

Wiring connection: M12 plug connector
Protection class: IP54 (with vertical sensor position)
Output signal: Echelon bus LONTalk protocol
LonMark(R) profile: temperature profile 1040
Transceiver type: FTT 10A
Power supply: 24Vacdc
Temperature element: NTC20k
Temperature range: -30...110C
Mounting place: air duct
Immersion depth: 280mm
Cable length: 2.5m


LF24

Honeywell Air duct temperature sensor, active, LF24

Protection class: IP65
Output signal: 0..10 Vac
Aluminium coil for average measurement 3,8 m. Sensor supplied with coil clamp.
Power supply: 24Vacdc
Temperature element: Pt100
Temperature range: 0...30C


LINC/FTT

Honeywell LON Internetwork Node Controller (LINC)

The LINC, Lon Internetwork Node Controller, provides the means by which IQLs integrate with the IQ System proprietary current loop network. The LINC operates at the IQ System's internetwork.
Model: LON INC
Network: LON + Trend LAN
Power: 24Vac


LQR1

Honeywell Air quality sensor, LQR1

Metal-oxid semi-conductor sensor for air quality.
For sensing of reducted gasses like methane, propane, ethane, and gases due to room occupancy of people like fatty acids, carbon monoxide, ammonia.
Output signal: 0..10Vdc
Contact input for activation of maximum limit.
Power supply: 24Vac
Mounting place: internal wall


M100-AG

Honeywell Actuator thermoelectric for terminal unit/radiator valves, 2,5 mm 90 N, M100 Z100

Electrical actuator on/off control, for valve series: V135, V58..A4, V58..C4. Z100-motors also suitable for V136-series valves.
Protection class: IP43 (IP40 for horizontal mounting)
End switch function/capacity: SPST; capacity 5 A
Stem force: 90N
Control input signal: 2-pt
Stroke: 2.5mm
Cable length: 1m

2,5 mm; 90 N; compact size
Power supply: 24Vac
Power loss action: stem extends
End switches: no
Runtime: 3.0min
Initial current: 0.6A


M100-AGE

Honeywell Actuator thermoelectric for terminal unit/radiator valves, 2,5 mm 90 N, M100 Z100

Electrical actuator on/off control, for valve series: V135, V58..A4, V58..C4. Z100-motors also suitable for V136-series valves.
Protection class: IP43 (IP40 for horizontal mounting)
End switch function/capacity: SPST; capacity 5 A
Stem force: 90N
Control input signal: 2-pt
Stroke: 2.5mm
Cable length: 1m

2,5 mm; 90 N; compact size
Power supply: 24Vac
Power loss action: stem extends
End switches: 1
Runtime: 3.0min
Initial current: 0.6A


M100-AGX

Honeywell Actuator thermoelectric for terminal unit/radiator valves, 2,5 mm 90 N, M100 Z100

Electrical actuator on/off control, for valve series: V135, V58..A4, V58..C4. Z100-motors also suitable for V136-series valves.
Protection class: IP43 (IP40 for horizontal mounting)
End switch function/capacity: SPST; capacity 5 A
Stem force: 90N
Control input signal: 2-pt
Stroke: 2.5mm
Cable length: 1m

2,5 mm; 90 N; compact size, low initial current
Power supply: 24Vac
Power loss action: stem extends
End switches: no
Runtime: 5.5min
Initial current: 0.2A


M100-AO

Honeywell Actuator thermoelectric for terminal unit/radiator valves, 2,5 mm 90 N, M100 Z100

Electrical actuator on/off control, for valve series: V135, V58..A4, V58..C4. Z100-motors also suitable for V136-series valves.
Protection class: IP43 (IP40 for horizontal mounting)
End switch function/capacity: SPST; capacity 5 A
Stem force: 90N
Control input signal: 2-pt
Stroke: 2.5mm
Cable length: 1m

2,5 mm; 90 N; compact size
Power supply: 24Vac
Power loss action: stem retracts
End switches: no
Runtime: 3.0min
Initial current: 0.6A


M100-AOX

Honeywell Actuator thermoelectric for terminal unit/radiator valves, 2,5 mm 90 N, M100 Z100

Electrical actuator on/off control, for valve series: V135, V58..A4, V58..C4. Z100-motors also suitable for V136-series valves.
Protection class: IP43 (IP40 for horizontal mounting)
End switch function/capacity: SPST; capacity 5 A
Stem force: 90N
Control input signal: 2-pt
Stroke: 2.5mm
Cable length: 1m

2,5 mm; 90 N; compact size, low initial current
Power supply: 24Vac
Power loss action: stem retracts
End switches: no
Runtime: 5.5min
Initial current: 0.2A


M100-BG

Honeywell Actuator thermoelectric for terminal unit/radiator valves, 2,5 mm 90 N, M100 Z100

Electrical actuator on/off control, for valve series: V135, V58..A4, V58..C4. Z100-motors also suitable for V136-series valves.
Protection class: IP43 (IP40 for horizontal mounting)
End switch function/capacity: SPST; capacity 5 A
Stem force: 90N
Control input signal: 2-pt
Stroke: 2.5mm
Cable length: 1m

2,5 mm; 90 N; compact size
Power supply: 230Vac
Power loss action: stem extends
End switches: no
Runtime: 3.0min
Initial current: 0.3A


M100-BGE

Honeywell Actuator thermoelectric for terminal unit/radiator valves, 2,5 mm 90 N, M100 Z100

Electrical actuator on/off control, for valve series: V135, V58..A4, V58..C4. Z100-motors also suitable for V136-series valves.
Protection class: IP43 (IP40 for horizontal mounting)
End switch function/capacity: SPST; capacity 5 A
Stem force: 90N
Control input signal: 2-pt
Stroke: 2.5mm
Cable length: 1m

2,5 mm; 90 N; compact size
Power supply: 230Vac
Power loss action: stem extends
End switches: 1
Runtime: 3.0min
Initial current: 0.3A


M100-BGX

Honeywell Actuator thermoelectric for terminal unit/radiator valves, 2,5 mm 90 N, M100 Z100

Electrical actuator on/off control, for valve series: V135, V58..A4, V58..C4. Z100-motors also suitable for V136-series valves.
Protection class: IP43 (IP40 for horizontal mounting)
End switch function/capacity: SPST; capacity 5 A
Stem force: 90N
Control input signal: 2-pt
Stroke: 2.5mm
Cable length: 1m

2,5 mm; 90 N; compact size, low initial current
Power supply: 230Vac
Power loss action: stem extends
End switches: no
Runtime: 5.5min
Initial current: 0.05A


M100-BO

Honeywell Actuator thermoelectric for terminal unit/radiator valves, 2,5 mm 90 N, M100 Z100

Electrical actuator on/off control, for valve series: V135, V58..A4, V58..C4. Z100-motors also suitable for V136-series valves.
Protection class: IP43 (IP40 for horizontal mounting)
End switch function/capacity: SPST; capacity 5 A
Stem force: 90N
Control input signal: 2-pt
Stroke: 2.5mm
Cable length: 1m

2,5 mm; 90 N; compact size
Power supply: 230Vac
Power loss action: stem retracts
End switches: no
Runtime: 3.0min
Initial current: 0.3A


M100-BOX

Honeywell Actuator thermoelectric for terminal unit/radiator valves, 2,5 mm 90 N, M100 Z100

Electrical actuator on/off control, for valve series: V135, V58..A4, V58..C4. Z100-motors also suitable for V136-series valves.
Protection class: IP43 (IP40 for horizontal mounting)
End switch function/capacity: SPST; capacity 5 A
Stem force: 90N
Control input signal: 2-pt
Stroke: 2.5mm
Cable length: 1m

2,5 mm; 90 N; compact size, low initial current
Power supply: 230Vac
Power loss action: stem retracts
End switches: no
Runtime: 5.5min
Initial current: 0.05A


M4450A1009

Honeywell Actuator thermoelectric for zone control, 6,5 mm 90 N, M4450A1009 M8450A1000

Electrical actuator on/off control, for valve series: V5822, V5823, V5832, V5833.
Protection class: IP43 (IP40 for horizontal mounting)
Stem force: 90N
Control input signal: 2-pt
Stroke: 6.5mm
Power loss action: stem retracts
Cable length: 2.5m
Initial current: 0.7A

6,5 mm; 90 N
Power supply: 230Vac
Runtime: 4.0min


M452A1006

Honeywell Actuator thermoelectric for zone control/district heating, M452A1006 M452B1005

Electrical actuator on/off control, for valve series: V5822, V5823, V5832, V5833, V5077, V5078.
Protection class: IP54
Position indication: yes
End switch function/capacity: end switch available
For vertical installation.
Stem force: 90N
Control input signal: 2-pt
Stroke: 8mm
Manual operation: yes
End switches: 1
Runtime: 20.0min


Power supply: 230Vac


M452B1005

Honeywell Actuator thermoelectric for zone control/district heating, M452A1006 M452B1005

Electrical actuator on/off control, for valve series: V5822, V5823, V5832, V5833, V5077, V5078.
Protection class: IP54
Position indication: yes
End switch function/capacity: end switch available
For vertical installation.
Stem force: 90N
Control input signal: 2-pt
Stroke: 8mm
Manual operation: yes
End switches: 1
Runtime: 20.0min


Power supply: 24Vac


M7410C-series

Honeywell Controller for VAV units, Excel 10, W7751D, W7751F
Additional products

3-pt valve actuator



M8001V230

Honeywell Small linear thermoelectric actuator for on/off (2-pt.) control (Eltherm-3) M8001V230

Thermoelectric actuator for on/off (2-pt.) control. Position indicator in drive housing. Stem action can be changed from 'normally closed' to 'normally open' by removing a special piece.
For controllers with switched output (2-point). Used with individual room control systems for activating valves, for example of the V2000, V5010, V900 or V9020/9040 Series.
Protection class: IP42 (IP44 for vertical installation)
Position indication: In drive housing
Stem force: 125N
Power supply: 230Vac
Control input signal: 2-pt
Stroke: 3mm
Manual operation: no
Runtime: 180s
Cable length: 1200mm
Initial current: 150mA


M8450A1000

Honeywell Actuator thermoelectric for zone control, 6,5 mm 90 N, M4450A1009 M8450A1000

Electrical actuator on/off control, for valve series: V5822, V5823, V5832, V5833.
Protection class: IP43 (IP40 for horizontal mounting)
Stem force: 90N
Control input signal: 2-pt
Stroke: 6.5mm
Power loss action: stem retracts
Cable length: 2.5m
Initial current: 0.7A

6,5 mm; 90 N
Power supply: 24Vac
Runtime: 5.0min


MAN/EMIQ

Honeywell Manuals and Reference Cards, MAN REF

Manuals
Product description: IQ Configuration Reference Manual


MAU8/Ms

Honeywell Differential pressure transmitter for liquids and gases, LON, FHBN 355-L
Accessories

Mail adapter union, brass G1/4 external thread with 8 mm



MAU8/Nst

Honeywell Differential pressure transmitter for liquids and gases, LON, FHBN 355-L
Accessories

Mail adapter union, steinless steel G1/4 external thread with 8 mm



MCM1

Honeywell Status display module, 4 channel

Status indication module for external contacts.
Input signal: 4 x external potential free contacts
Output signal: 4 x 24Vacdc (from power supply)
Manual operation functions: 4 x switch for LED status inversion
LED functions: 4 x red or green LED showing the status of the input
Mounting: DIN rail
Power supply: 24Vacdc


MCR200-12

Honeywell Controllers for 1 heating circuit, 1 boiler, MCR200-12, MCR200-13

Microprocessor controller with variable hard- and software.
Applications:
MCR200-12: controller for 1 heating circuit, 1 mixed DHWS, 1 circulation pump, 1 stage burner
MCR200-13: controller for 1 heating circuit, 1 mixed DHWS, 1 or 2 stage burner
Control output signal: potential free relays and/or 0..10V outputs
Hardware outputs: relays and/or 0..10V outputs
Control functions: main temperature control, limit control, cascade control, outside air compensation control
Modes of operation: off, eco, summer, manu, auto
Applicable sensor types: NTC 20 kohm
Hardware inputs: 12 universal, 1 digital
Digital input functions: DHW-switch, counter, heatmeter
Manual operation functions: manual switches/potentiometers for every output
Time program: annual clock for every control circuit/ quick access timer for every control circuit
LED functions: indicating LED's for every output
Output modules: three different output modules serve the necessary flexibility; MA1: one 3-position relay output + four relays; MA2: two 3-position outputs + two relays: MA3: four 0..10V outputs + three relays
Materials: ABS, UL-approved
Protection class: IP30
Memory back-up: lithium battery
Type of terminals: screw terminals
Mounting: wall and cabinet
Number of heating circuits: 1
Heating/Ventilation application: heating
First output module: MA1
Second output module: empty
Setpoint device: with wall modules
User panel language: German
C-bus connection: via additional products
Modem connection: with additional products
Power supply: 230Vac
Housing (HxWxD): 138mm|186mm|145mm
Max. ambient temperature: 40C


Burner output: 1 stage


MCR200-13

Honeywell Controllers for 1 heating circuit, 1 boiler, MCR200-12, MCR200-13

Microprocessor controller with variable hard- and software.
Applications:
MCR200-12: controller for 1 heating circuit, 1 mixed DHWS, 1 circulation pump, 1 stage burner
MCR200-13: controller for 1 heating circuit, 1 mixed DHWS, 1 or 2 stage burner
Control output signal: potential free relays and/or 0..10V outputs
Hardware outputs: relays and/or 0..10V outputs
Control functions: main temperature control, limit control, cascade control, outside air compensation control
Modes of operation: off, eco, summer, manu, auto
Applicable sensor types: NTC 20 kohm
Hardware inputs: 12 universal, 1 digital
Digital input functions: DHW-switch, counter, heatmeter
Manual operation functions: manual switches/potentiometers for every output
Time program: annual clock for every control circuit/ quick access timer for every control circuit
LED functions: indicating LED's for every output
Output modules: three different output modules serve the necessary flexibility; MA1: one 3-position relay output + four relays; MA2: two 3-position outputs + two relays: MA3: four 0..10V outputs + three relays
Materials: ABS, UL-approved
Protection class: IP30
Memory back-up: lithium battery
Type of terminals: screw terminals
Mounting: wall and cabinet
Number of heating circuits: 1
Heating/Ventilation application: heating
First output module: MA1
Second output module: empty
Setpoint device: with wall modules
User panel language: German
C-bus connection: via additional products
Modem connection: with additional products
Power supply: 230Vac
Housing (HxWxD): 138mm|186mm|145mm
Max. ambient temperature: 40C


Burner output: 1/2 stages


MCR200-22

Honeywell Controllers for 2,3 heating circuits, 1 boiler, MCR200-22, MCR200-32

Microprocessor controller with variable hard- and software.
Applications:
MCR200-22: controller for 2 heating circuits, 1 mixed DHWS, 1 circulation pump, 1 or 2 stage or modulating burner
MCR200-32: controller for 3 heating circuits, 1 mixed DHWS, 1 or 2 stage burner
Control output signal: potential free relays and/or 0..10V outputs
Hardware outputs: relays and/or 0..10V outputs
Control functions: main temperature control, limit control, cascade control, outside air compensation control
Modes of operation: off, eco, summer, manu, auto
Applicable sensor types: NTC 20 kohm
Hardware inputs: 12 universal, 1 digital
Digital input functions: DHW-switch, counter, heatmeter
Manual operation functions: manual switches/potentiometers for every output
Time program: annual clock for every control circuit/ quick access timer for every control circuit
LED functions: indicating LED's for every output
Output modules: three different output modules serve the necessary flexibility; MA1: one 3-position relay output + four relays; MA2: two 3-position outputs + two relays: MA3: four 0..10V outputs + three relays
Materials: ABS, UL-approved
Protection class: IP30
Memory back-up: lithium battery
Type of terminals: screw terminals
Mounting: wall and cabinet
Heating/Ventilation application: heating
First output module: MA1
Second output module: MA2
Setpoint device: with wall modules
User panel language: German
C-bus connection: via additional products
Modem connection: with additional products
Power supply: 230Vac
Housing (HxWxD): 138mm|186mm|145mm
Max. ambient temperature: 40C


Number of heating circuits: 2
Burner output: 1/2 stage or modulating


MCR200-32

Honeywell Controllers for 2,3 heating circuits, 1 boiler, MCR200-22, MCR200-32

Microprocessor controller with variable hard- and software.
Applications:
MCR200-22: controller for 2 heating circuits, 1 mixed DHWS, 1 circulation pump, 1 or 2 stage or modulating burner
MCR200-32: controller for 3 heating circuits, 1 mixed DHWS, 1 or 2 stage burner
Control output signal: potential free relays and/or 0..10V outputs
Hardware outputs: relays and/or 0..10V outputs
Control functions: main temperature control, limit control, cascade control, outside air compensation control
Modes of operation: off, eco, summer, manu, auto
Applicable sensor types: NTC 20 kohm
Hardware inputs: 12 universal, 1 digital
Digital input functions: DHW-switch, counter, heatmeter
Manual operation functions: manual switches/potentiometers for every output
Time program: annual clock for every control circuit/ quick access timer for every control circuit
LED functions: indicating LED's for every output
Output modules: three different output modules serve the necessary flexibility; MA1: one 3-position relay output + four relays; MA2: two 3-position outputs + two relays: MA3: four 0..10V outputs + three relays
Materials: ABS, UL-approved
Protection class: IP30
Memory back-up: lithium battery
Type of terminals: screw terminals
Mounting: wall and cabinet
Heating/Ventilation application: heating
First output module: MA1
Second output module: MA2
Setpoint device: with wall modules
User panel language: German
C-bus connection: via additional products
Modem connection: with additional products
Power supply: 230Vac
Housing (HxWxD): 138mm|186mm|145mm
Max. ambient temperature: 40C


Number of heating circuits: 3
Burner output: 1/2 stages


MCR200-41

Honeywell MCR200 extension controllers 2,3,4 heating circuits, MCR200-4x

Microprocessor controller with variable hard- and software.
Applications:
MCR200-41: controller for 2 heating circuits
MCR200-43: controller for 3 heating circuits, 1 mixed DHWS, 1 circulation pump, 1 switching contact
MCR200-45: controller for 4 heating circuits
Control output signal: potential free relays and/or 0..10V outputs
Hardware outputs: relays and/or 0..10V outputs
Control functions: main temperature control, limit control, cascade control, outside air compensation control
Modes of operation: off, eco, summer, manu, auto
Applicable sensor types: NTC 20 kohm
Hardware inputs: 12 universal, 1 digital
Digital input functions: DHW-switch, counter, heatmeter
Manual operation functions: manual switches/potentiometers for every output
Time program: annual clock for every control circuit/ quick access timer for every control circuit
LED functions: indicating LED's for every output
Output modules: three different output modules serve the necessary flexibility; MA1: one 3-position relay output + four relays; MA2: two 3-position outputs + two relays: MA3: four 0..10V outputs + three relays
Materials: ABS, UL-approved
Protection class: IP30
Memory back-up: lithium battery
Type of terminals: screw terminals
Mounting: wall and cabinet
Heating/Ventilation application: heating
Setpoint device: with wall modules
User panel language: German
C-bus connection: via additional products
Modem connection: with additional products
Power supply: 230Vac
Housing (HxWxD): 138mm|186mm|145mm
Max. ambient temperature: 40C


Number of heating circuits: 2
First output module: MA1
Second output module: empty


MCR200-43

Honeywell MCR200 extension controllers 2,3,4 heating circuits, MCR200-4x

Microprocessor controller with variable hard- and software.
Applications:
MCR200-41: controller for 2 heating circuits
MCR200-43: controller for 3 heating circuits, 1 mixed DHWS, 1 circulation pump, 1 switching contact
MCR200-45: controller for 4 heating circuits
Control output signal: potential free relays and/or 0..10V outputs
Hardware outputs: relays and/or 0..10V outputs
Control functions: main temperature control, limit control, cascade control, outside air compensation control
Modes of operation: off, eco, summer, manu, auto
Applicable sensor types: NTC 20 kohm
Hardware inputs: 12 universal, 1 digital
Digital input functions: DHW-switch, counter, heatmeter
Manual operation functions: manual switches/potentiometers for every output
Time program: annual clock for every control circuit/ quick access timer for every control circuit
LED functions: indicating LED's for every output
Output modules: three different output modules serve the necessary flexibility; MA1: one 3-position relay output + four relays; MA2: two 3-position outputs + two relays: MA3: four 0..10V outputs + three relays
Materials: ABS, UL-approved
Protection class: IP30
Memory back-up: lithium battery
Type of terminals: screw terminals
Mounting: wall and cabinet
Heating/Ventilation application: heating
Setpoint device: with wall modules
User panel language: German
C-bus connection: via additional products
Modem connection: with additional products
Power supply: 230Vac
Housing (HxWxD): 138mm|186mm|145mm
Max. ambient temperature: 40C


Number of heating circuits: 3
First output module: MA2
Second output module: MA1


MCR200-45

Honeywell MCR200 extension controllers 2,3,4 heating circuits, MCR200-4x

Microprocessor controller with variable hard- and software.
Applications:
MCR200-41: controller for 2 heating circuits
MCR200-43: controller for 3 heating circuits, 1 mixed DHWS, 1 circulation pump, 1 switching contact
MCR200-45: controller for 4 heating circuits
Control output signal: potential free relays and/or 0..10V outputs
Hardware outputs: relays and/or 0..10V outputs
Control functions: main temperature control, limit control, cascade control, outside air compensation control
Modes of operation: off, eco, summer, manu, auto
Applicable sensor types: NTC 20 kohm
Hardware inputs: 12 universal, 1 digital
Digital input functions: DHW-switch, counter, heatmeter
Manual operation functions: manual switches/potentiometers for every output
Time program: annual clock for every control circuit/ quick access timer for every control circuit
LED functions: indicating LED's for every output
Output modules: three different output modules serve the necessary flexibility; MA1: one 3-position relay output + four relays; MA2: two 3-position outputs + two relays: MA3: four 0..10V outputs + three relays
Materials: ABS, UL-approved
Protection class: IP30
Memory back-up: lithium battery
Type of terminals: screw terminals
Mounting: wall and cabinet
Heating/Ventilation application: heating
Setpoint device: with wall modules
User panel language: German
C-bus connection: via additional products
Modem connection: with additional products
Power supply: 230Vac
Housing (HxWxD): 138mm|186mm|145mm
Max. ambient temperature: 40C


Number of heating circuits: 4
First output module: MA2
Second output module: MA2


MCR200-51

Honeywell District heating controllers, MCR200-5x

Microprocessor controller with variable hard- and software.
Applications:
MCR200-51: controller for 1 district heating circuit, 1 mixed DHWS, 1 heat exchanger valve, German version
MCR200-52: controller for 1 district heating circuit, 1 mixed or unmixed DHWS, 1 or 2 heat exchanger valves, German version
MCR200-53: controller for 2 district heating circuit, 1 mixed or unmixed DHWS, 1 heat exchanger valve, German version
MCR200-54: controller for 1 district heating pump circuit, 1 mixed or unmixed DHWS, 2 heat exchanger valves, German version
MCR200-55: controller for 1 district heating circuit, 1 mixed or unmixed DHWS, 1 heat exchanger valve, German version
Control output signal: potential free relays and/or 0..10V outputs
Hardware outputs: relays and/or 0..10V outputs
Control functions: main temperature control, limit control, cascade control, outside air compensation control
Modes of operation: off, eco, summer, manu, auto
Applicable sensor types: NTC 20 kohm
Hardware inputs: 12 universal, 1 digital
Digital input functions: DHW-switch, counter, heatmeter
Manual operation functions: manual switches/potentiometers for every output
Time program: annual clock for every control circuit/ quick access timer for every control circuit
LED functions: indicating LED's for every output
Output modules: three different output modules serve the necessary flexibility; MA1: one 3-position relay output + four relays; MA2: two 3-position outputs + two relays: MA3: four 0..10V outputs + three relays
Materials: ABS, UL-approved
Protection class: IP30
Memory back-up: lithium battery
Type of terminals: screw terminals
Mounting: wall and cabinet
Heating/Ventilation application: heating
Setpoint device: with wall modules
User panel language: German
C-bus connection: via additional products
Modem connection: with additional products
Power supply: 230Vac
Housing (HxWxD): 138mm|186mm|145mm
Max. ambient temperature: 40C


Number of heating circuits: 1
First output module: empty
Second output module: MA2


MCR200-52

Honeywell District heating controllers, MCR200-5x

Microprocessor controller with variable hard- and software.
Applications:
MCR200-51: controller for 1 district heating circuit, 1 mixed DHWS, 1 heat exchanger valve, German version
MCR200-52: controller for 1 district heating circuit, 1 mixed or unmixed DHWS, 1 or 2 heat exchanger valves, German version
MCR200-53: controller for 2 district heating circuit, 1 mixed or unmixed DHWS, 1 heat exchanger valve, German version
MCR200-54: controller for 1 district heating pump circuit, 1 mixed or unmixed DHWS, 2 heat exchanger valves, German version
MCR200-55: controller for 1 district heating circuit, 1 mixed or unmixed DHWS, 1 heat exchanger valve, German version
Control output signal: potential free relays and/or 0..10V outputs
Hardware outputs: relays and/or 0..10V outputs
Control functions: main temperature control, limit control, cascade control, outside air compensation control
Modes of operation: off, eco, summer, manu, auto
Applicable sensor types: NTC 20 kohm
Hardware inputs: 12 universal, 1 digital
Digital input functions: DHW-switch, counter, heatmeter
Manual operation functions: manual switches/potentiometers for every output
Time program: annual clock for every control circuit/ quick access timer for every control circuit
LED functions: indicating LED's for every output
Output modules: three different output modules serve the necessary flexibility; MA1: one 3-position relay output + four relays; MA2: two 3-position outputs + two relays: MA3: four 0..10V outputs + three relays
Materials: ABS, UL-approved
Protection class: IP30
Memory back-up: lithium battery
Type of terminals: screw terminals
Mounting: wall and cabinet
Heating/Ventilation application: heating
Setpoint device: with wall modules
User panel language: German
C-bus connection: via additional products
Modem connection: with additional products
Power supply: 230Vac
Housing (HxWxD): 138mm|186mm|145mm
Max. ambient temperature: 40C


Number of heating circuits: 1
First output module: MA1
Second output module: MA2


MCR200-53

Honeywell District heating controllers, MCR200-5x

Microprocessor controller with variable hard- and software.
Applications:
MCR200-51: controller for 1 district heating circuit, 1 mixed DHWS, 1 heat exchanger valve, German version
MCR200-52: controller for 1 district heating circuit, 1 mixed or unmixed DHWS, 1 or 2 heat exchanger valves, German version
MCR200-53: controller for 2 district heating circuit, 1 mixed or unmixed DHWS, 1 heat exchanger valve, German version
MCR200-54: controller for 1 district heating pump circuit, 1 mixed or unmixed DHWS, 2 heat exchanger valves, German version
MCR200-55: controller for 1 district heating circuit, 1 mixed or unmixed DHWS, 1 heat exchanger valve, German version
Control output signal: potential free relays and/or 0..10V outputs
Hardware outputs: relays and/or 0..10V outputs
Control functions: main temperature control, limit control, cascade control, outside air compensation control
Modes of operation: off, eco, summer, manu, auto
Applicable sensor types: NTC 20 kohm
Hardware inputs: 12 universal, 1 digital
Digital input functions: DHW-switch, counter, heatmeter
Manual operation functions: manual switches/potentiometers for every output
Time program: annual clock for every control circuit/ quick access timer for every control circuit
LED functions: indicating LED's for every output
Output modules: three different output modules serve the necessary flexibility; MA1: one 3-position relay output + four relays; MA2: two 3-position outputs + two relays: MA3: four 0..10V outputs + three relays
Materials: ABS, UL-approved
Protection class: IP30
Memory back-up: lithium battery
Type of terminals: screw terminals
Mounting: wall and cabinet
Heating/Ventilation application: heating
Setpoint device: with wall modules
User panel language: German
C-bus connection: via additional products
Modem connection: with additional products
Power supply: 230Vac
Housing (HxWxD): 138mm|186mm|145mm
Max. ambient temperature: 40C


Number of heating circuits: 2
First output module: MA1
Second output module: MA2


MCR200-54

Honeywell District heating controllers, MCR200-5x

Microprocessor controller with variable hard- and software.
Applications:
MCR200-51: controller for 1 district heating circuit, 1 mixed DHWS, 1 heat exchanger valve, German version
MCR200-52: controller for 1 district heating circuit, 1 mixed or unmixed DHWS, 1 or 2 heat exchanger valves, German version
MCR200-53: controller for 2 district heating circuit, 1 mixed or unmixed DHWS, 1 heat exchanger valve, German version
MCR200-54: controller for 1 district heating pump circuit, 1 mixed or unmixed DHWS, 2 heat exchanger valves, German version
MCR200-55: controller for 1 district heating circuit, 1 mixed or unmixed DHWS, 1 heat exchanger valve, German version
Control output signal: potential free relays and/or 0..10V outputs
Hardware outputs: relays and/or 0..10V outputs
Control functions: main temperature control, limit control, cascade control, outside air compensation control
Modes of operation: off, eco, summer, manu, auto
Applicable sensor types: NTC 20 kohm
Hardware inputs: 12 universal, 1 digital
Digital input functions: DHW-switch, counter, heatmeter
Manual operation functions: manual switches/potentiometers for every output
Time program: annual clock for every control circuit/ quick access timer for every control circuit
LED functions: indicating LED's for every output
Output modules: three different output modules serve the necessary flexibility; MA1: one 3-position relay output + four relays; MA2: two 3-position outputs + two relays: MA3: four 0..10V outputs + three relays
Materials: ABS, UL-approved
Protection class: IP30
Memory back-up: lithium battery
Type of terminals: screw terminals
Mounting: wall and cabinet
Heating/Ventilation application: heating
Setpoint device: with wall modules
User panel language: German
C-bus connection: via additional products
Modem connection: with additional products
Power supply: 230Vac
Housing (HxWxD): 138mm|186mm|145mm
Max. ambient temperature: 40C


Number of heating circuits: 1
First output module: empty
Second output module: MA2


MCR200-55

Honeywell District heating controllers, MCR200-5x

Microprocessor controller with variable hard- and software.
Applications:
MCR200-51: controller for 1 district heating circuit, 1 mixed DHWS, 1 heat exchanger valve, German version
MCR200-52: controller for 1 district heating circuit, 1 mixed or unmixed DHWS, 1 or 2 heat exchanger valves, German version
MCR200-53: controller for 2 district heating circuit, 1 mixed or unmixed DHWS, 1 heat exchanger valve, German version
MCR200-54: controller for 1 district heating pump circuit, 1 mixed or unmixed DHWS, 2 heat exchanger valves, German version
MCR200-55: controller for 1 district heating circuit, 1 mixed or unmixed DHWS, 1 heat exchanger valve, German version
Control output signal: potential free relays and/or 0..10V outputs
Hardware outputs: relays and/or 0..10V outputs
Control functions: main temperature control, limit control, cascade control, outside air compensation control
Modes of operation: off, eco, summer, manu, auto
Applicable sensor types: NTC 20 kohm
Hardware inputs: 12 universal, 1 digital
Digital input functions: DHW-switch, counter, heatmeter
Manual operation functions: manual switches/potentiometers for every output
Time program: annual clock for every control circuit/ quick access timer for every control circuit
LED functions: indicating LED's for every output
Output modules: three different output modules serve the necessary flexibility; MA1: one 3-position relay output + four relays; MA2: two 3-position outputs + two relays: MA3: four 0..10V outputs + three relays
Materials: ABS, UL-approved
Protection class: IP30
Memory back-up: lithium battery
Type of terminals: screw terminals
Mounting: wall and cabinet
Heating/Ventilation application: heating
Setpoint device: with wall modules
User panel language: German
C-bus connection: via additional products
Modem connection: with additional products
Power supply: 230Vac
Housing (HxWxD): 138mm|186mm|145mm
Max. ambient temperature: 40C


Number of heating circuits: 1
First output module: empty
Second output module: MA1


MCR200-61

Honeywell Controllers for ventilation, MCR200-6x

Microprocessor controller with variable hard- and software.
Applications:
MCR200-61: controller for 2 ventilation systems, 1st system with 3 sequences and 2-stage ventilator; 2nd system with 1 sequence and 1-stage ventilator
MCR200-62: controller for 1 ventilation system, 3 sequences and 2-stage ventilator
MCR200-63: controller for 2 equal ventilation system, 3 sequences and 2-stage ventilator
MCR200-64: controller for 3 equal ventilation system, 2 sequences and 1-stage ventilator
MCR200-66: controller for 1 ventilation system, 2 sequences and 1-stage ventilator; relay outputs only
Control output signal: potential free relays and/or 0..10V outputs
Hardware outputs: relays and/or 0..10V outputs
Control functions: main temperature control, limit control, cascade control, outside air compensation control
Modes of operation: off, eco, summer, manu, auto
Applicable sensor types: NTC 20 kohm
Hardware inputs: 12 universal, 1 digital
Digital input functions: DHW-switch, counter, heatmeter
Manual operation functions: manual switches/potentiometers for every output
Time program: annual clock for every control circuit/ quick access timer for every control circuit
LED functions: indicating LED's for every output
Output modules: three different output modules serve the necessary flexibility; MA1: one 3-position relay output + four relays; MA2: two 3-position outputs + two relays: MA3: four 0..10V outputs + three relays
Materials: ABS, UL-approved
Protection class: IP30
Memory back-up: lithium battery
Type of terminals: screw terminals
Mounting: wall and cabinet
Heating/Ventilation application: ventilating
Setpoint device: with wall modules
User panel language: German
C-bus connection: via additional products
Modem connection: with additional products
Power supply: 230Vac
Housing (HxWxD): 138mm|186mm|145mm
Max. ambient temperature: 40C


Number of ventilation systems: 2
Max. number of circuits sequence control: 3
First output module: MA3
Second output module: MA1


MCR200-62

Honeywell Controllers for ventilation, MCR200-6x

Microprocessor controller with variable hard- and software.
Applications:
MCR200-61: controller for 2 ventilation systems, 1st system with 3 sequences and 2-stage ventilator; 2nd system with 1 sequence and 1-stage ventilator
MCR200-62: controller for 1 ventilation system, 3 sequences and 2-stage ventilator
MCR200-63: controller for 2 equal ventilation system, 3 sequences and 2-stage ventilator
MCR200-64: controller for 3 equal ventilation system, 2 sequences and 1-stage ventilator
MCR200-66: controller for 1 ventilation system, 2 sequences and 1-stage ventilator; relay outputs only
Control output signal: potential free relays and/or 0..10V outputs
Hardware outputs: relays and/or 0..10V outputs
Control functions: main temperature control, limit control, cascade control, outside air compensation control
Modes of operation: off, eco, summer, manu, auto
Applicable sensor types: NTC 20 kohm
Hardware inputs: 12 universal, 1 digital
Digital input functions: DHW-switch, counter, heatmeter
Manual operation functions: manual switches/potentiometers for every output
Time program: annual clock for every control circuit/ quick access timer for every control circuit
LED functions: indicating LED's for every output
Output modules: three different output modules serve the necessary flexibility; MA1: one 3-position relay output + four relays; MA2: two 3-position outputs + two relays: MA3: four 0..10V outputs + three relays
Materials: ABS, UL-approved
Protection class: IP30
Memory back-up: lithium battery
Type of terminals: screw terminals
Mounting: wall and cabinet
Heating/Ventilation application: ventilating
Setpoint device: with wall modules
User panel language: German
C-bus connection: via additional products
Modem connection: with additional products
Power supply: 230Vac
Housing (HxWxD): 138mm|186mm|145mm
Max. ambient temperature: 40C


Number of ventilation systems: 1
Max. number of circuits sequence control: 3
First output module: MA3
Second output module: empty


MCR200-63

Honeywell Controllers for ventilation, MCR200-6x

Microprocessor controller with variable hard- and software.
Applications:
MCR200-61: controller for 2 ventilation systems, 1st system with 3 sequences and 2-stage ventilator; 2nd system with 1 sequence and 1-stage ventilator
MCR200-62: controller for 1 ventilation system, 3 sequences and 2-stage ventilator
MCR200-63: controller for 2 equal ventilation system, 3 sequences and 2-stage ventilator
MCR200-64: controller for 3 equal ventilation system, 2 sequences and 1-stage ventilator
MCR200-66: controller for 1 ventilation system, 2 sequences and 1-stage ventilator; relay outputs only
Control output signal: potential free relays and/or 0..10V outputs
Hardware outputs: relays and/or 0..10V outputs
Control functions: main temperature control, limit control, cascade control, outside air compensation control
Modes of operation: off, eco, summer, manu, auto
Applicable sensor types: NTC 20 kohm
Hardware inputs: 12 universal, 1 digital
Digital input functions: DHW-switch, counter, heatmeter
Manual operation functions: manual switches/potentiometers for every output
Time program: annual clock for every control circuit/ quick access timer for every control circuit
LED functions: indicating LED's for every output
Output modules: three different output modules serve the necessary flexibility; MA1: one 3-position relay output + four relays; MA2: two 3-position outputs + two relays: MA3: four 0..10V outputs + three relays
Materials: ABS, UL-approved
Protection class: IP30
Memory back-up: lithium battery
Type of terminals: screw terminals
Mounting: wall and cabinet
Heating/Ventilation application: ventilating
Setpoint device: with wall modules
User panel language: German
C-bus connection: via additional products
Modem connection: with additional products
Power supply: 230Vac
Housing (HxWxD): 138mm|186mm|145mm
Max. ambient temperature: 40C


Number of ventilation systems: 2
Max. number of circuits sequence control: 3
First output module: MA3
Second output module: MA3


MCR200-64

Honeywell Controllers for ventilation, MCR200-6x

Microprocessor controller with variable hard- and software.
Applications:
MCR200-61: controller for 2 ventilation systems, 1st system with 3 sequences and 2-stage ventilator; 2nd system with 1 sequence and 1-stage ventilator
MCR200-62: controller for 1 ventilation system, 3 sequences and 2-stage ventilator
MCR200-63: controller for 2 equal ventilation system, 3 sequences and 2-stage ventilator
MCR200-64: controller for 3 equal ventilation system, 2 sequences and 1-stage ventilator
MCR200-66: controller for 1 ventilation system, 2 sequences and 1-stage ventilator; relay outputs only
Control output signal: potential free relays and/or 0..10V outputs
Hardware outputs: relays and/or 0..10V outputs
Control functions: main temperature control, limit control, cascade control, outside air compensation control
Modes of operation: off, eco, summer, manu, auto
Applicable sensor types: NTC 20 kohm
Hardware inputs: 12 universal, 1 digital
Digital input functions: DHW-switch, counter, heatmeter
Manual operation functions: manual switches/potentiometers for every output
Time program: annual clock for every control circuit/ quick access timer for every control circuit
LED functions: indicating LED's for every output
Output modules: three different output modules serve the necessary flexibility; MA1: one 3-position relay output + four relays; MA2: two 3-position outputs + two relays: MA3: four 0..10V outputs + three relays
Materials: ABS, UL-approved
Protection class: IP30
Memory back-up: lithium battery
Type of terminals: screw terminals
Mounting: wall and cabinet
Heating/Ventilation application: ventilating
Setpoint device: with wall modules
User panel language: German
C-bus connection: via additional products
Modem connection: with additional products
Power supply: 230Vac
Housing (HxWxD): 138mm|186mm|145mm
Max. ambient temperature: 40C


Number of ventilation systems: 3
Max. number of circuits sequence control: 2
First output module: MA3
Second output module: MA3


MCR200-65

Honeywell Controllers for heating and ventilation, MCR200-65

Microprocessor controller with variable hard- and software.
Applications:
MCR200-65: controller for 1 heating and ventilation system, Heating: 1 heating circuit, 1 mixed DHWS, 1 circulation pump; Ventilation: 2 sequences, 1-stage ventilator
Control output signal: potential free relays and/or 0..10V outputs
Hardware outputs: relays and/or 0..10V outputs
Control functions: main temperature control, limit control, cascade control, outside air compensation control
Modes of operation: off, eco, summer, manu, auto
Applicable sensor types: NTC 20 kohm
Hardware inputs: 12 universal, 1 digital
Digital input functions: DHW-switch, counter, heatmeter
Manual operation functions: manual switches/potentiometers for every output
Time program: annual clock for every control circuit/ quick access timer for every control circuit
LED functions: indicating LED's for every output
Output modules: three different output modules serve the necessary flexibility; MA1: one 3-position relay output + four relays; MA2: two 3-position outputs + two relays: MA3: four 0..10V outputs + three relays
Materials: ABS, UL-approved
Protection class: IP30
Memory back-up: lithium battery
Type of terminals: screw terminals
Mounting: wall and cabinet
Number of heating circuits: 1
Burner output: 1/2 stages
Number of ventilation systems: 1
Max. number of circuits sequence control: 2
Heating/Ventilation application: heating + ventilating
First output module: MA1
Second output module: MA2
Setpoint device: with wall modules
User panel language: German
C-bus connection: via additional products
Modem connection: with additional products
Power supply: 230Vac
Housing (HxWxD): 138mm|186mm|145mm
Max. ambient temperature: 40C


MCR200-66

Honeywell Controllers for ventilation, MCR200-6x

Microprocessor controller with variable hard- and software.
Applications:
MCR200-61: controller for 2 ventilation systems, 1st system with 3 sequences and 2-stage ventilator; 2nd system with 1 sequence and 1-stage ventilator
MCR200-62: controller for 1 ventilation system, 3 sequences and 2-stage ventilator
MCR200-63: controller for 2 equal ventilation system, 3 sequences and 2-stage ventilator
MCR200-64: controller for 3 equal ventilation system, 2 sequences and 1-stage ventilator
MCR200-66: controller for 1 ventilation system, 2 sequences and 1-stage ventilator; relay outputs only
Control output signal: potential free relays and/or 0..10V outputs
Hardware outputs: relays and/or 0..10V outputs
Control functions: main temperature control, limit control, cascade control, outside air compensation control
Modes of operation: off, eco, summer, manu, auto
Applicable sensor types: NTC 20 kohm
Hardware inputs: 12 universal, 1 digital
Digital input functions: DHW-switch, counter, heatmeter
Manual operation functions: manual switches/potentiometers for every output
Time program: annual clock for every control circuit/ quick access timer for every control circuit
LED functions: indicating LED's for every output
Output modules: three different output modules serve the necessary flexibility; MA1: one 3-position relay output + four relays; MA2: two 3-position outputs + two relays: MA3: four 0..10V outputs + three relays
Materials: ABS, UL-approved
Protection class: IP30
Memory back-up: lithium battery
Type of terminals: screw terminals
Mounting: wall and cabinet
Heating/Ventilation application: ventilating
Setpoint device: with wall modules
User panel language: German
C-bus connection: via additional products
Modem connection: with additional products
Power supply: 230Vac
Housing (HxWxD): 138mm|186mm|145mm
Max. ambient temperature: 40C


Number of ventilation systems: 1
Max. number of circuits sequence control: 2
First output module: MA2
Second output module: empty


MCR200-73

Honeywell Controllers for 2 boilers, MCR200-73, MCR200-74

Microprocessor controller with variable hard- and software.
Applications:
MCR200-71: controller for 2 boilers, 1st boiler with 1- or 2-stage or modulating burner, 2nd boiler with 1- or 2-stage burner
MCR200-73: controller for 2 boilers, 1st boiler with 1- or 2-stage or modulating burner, 2nd boiler with 1- or 2-stage burner
MCR200-74: controller for 2 boilers, 1st and 2nd boiler with 1-stage or modulating burner
Control output signal: potential free relays and/or 0..10V outputs
Hardware outputs: relays and/or 0..10V outputs
Control functions: main temperature control, limit control, cascade control, outside air compensation control
Modes of operation: off, eco, summer, manu, auto
Applicable sensor types: NTC 20 kohm
Hardware inputs: 12 universal, 1 digital
Digital input functions: DHW-switch, counter, heatmeter
Manual operation functions: manual switches/potentiometers for every output
Time program: annual clock for every control circuit/ quick access timer for every control circuit
LED functions: indicating LED's for every output
Output modules: three different output modules serve the necessary flexibility; MA1: one 3-position relay output + four relays; MA2: two 3-position outputs + two relays: MA3: four 0..10V outputs + three relays
Materials: ABS, UL-approved
Protection class: IP30
Memory back-up: lithium battery
Type of terminals: screw terminals
Mounting: wall and cabinet
Heating/Ventilation application: heating
First output module: MA2
Setpoint device: with wall modules
User panel language: German
C-bus connection: via additional products
Modem connection: with additional products
Power supply: 230Vac
Housing (HxWxD): 138mm|186mm|145mm
Max. ambient temperature: 40C


Burner output: 1/2 stage or modulating
Burner 2 output: 1/2 stages
Second output module: MA1


MCR200-74

Honeywell Controllers for 2 boilers, MCR200-73, MCR200-74

Microprocessor controller with variable hard- and software.
Applications:
MCR200-71: controller for 2 boilers, 1st boiler with 1- or 2-stage or modulating burner, 2nd boiler with 1- or 2-stage burner
MCR200-73: controller for 2 boilers, 1st boiler with 1- or 2-stage or modulating burner, 2nd boiler with 1- or 2-stage burner
MCR200-74: controller for 2 boilers, 1st and 2nd boiler with 1-stage or modulating burner
Control output signal: potential free relays and/or 0..10V outputs
Hardware outputs: relays and/or 0..10V outputs
Control functions: main temperature control, limit control, cascade control, outside air compensation control
Modes of operation: off, eco, summer, manu, auto
Applicable sensor types: NTC 20 kohm
Hardware inputs: 12 universal, 1 digital
Digital input functions: DHW-switch, counter, heatmeter
Manual operation functions: manual switches/potentiometers for every output
Time program: annual clock for every control circuit/ quick access timer for every control circuit
LED functions: indicating LED's for every output
Output modules: three different output modules serve the necessary flexibility; MA1: one 3-position relay output + four relays; MA2: two 3-position outputs + two relays: MA3: four 0..10V outputs + three relays
Materials: ABS, UL-approved
Protection class: IP30
Memory back-up: lithium battery
Type of terminals: screw terminals
Mounting: wall and cabinet
Heating/Ventilation application: heating
First output module: MA2
Setpoint device: with wall modules
User panel language: German
C-bus connection: via additional products
Modem connection: with additional products
Power supply: 230Vac
Housing (HxWxD): 138mm|186mm|145mm
Max. ambient temperature: 40C


Burner output: 1 stage or modulating
Burner 2 output: 1 stage or modulating
Second output module: MA2


MCR200-81

Honeywell Controllers for multivalent heating applications, MCR200-81, MCR200-82

Microprocessor controller with variable hard- and software.
Applications:
MCR200-81: controller for 1 heating circuit, 1 mixed DHWS, 1 solar panel + pump, 1-stage burner
MCR200-82: controller for 2 heating circuits, 1 unmixed DHWS, 1 solar panel + pump, 1 buffer tank, 2-stage burner, optional solid panel boiler
Control output signal: potential free relays and/or 0..10V outputs
Hardware outputs: relays and/or 0..10V outputs
Control functions: main temperature control, limit control, cascade control, outside air compensation control
Modes of operation: off, eco, summer, manu, auto
Applicable sensor types: NTC 20 kohm
Hardware inputs: 12 universal, 1 digital
Digital input functions: DHW-switch, counter, heatmeter
Manual operation functions: manual switches/potentiometers for every output
Time program: annual clock for every control circuit/ quick access timer for every control circuit
LED functions: indicating LED's for every output
Output modules: three different output modules serve the necessary flexibility; MA1: one 3-position relay output + four relays; MA2: two 3-position outputs + two relays: MA3: four 0..10V outputs + three relays
Materials: ABS, UL-approved
Protection class: IP30
Memory back-up: lithium battery
Type of terminals: screw terminals
Mounting: wall and cabinet
Heating/Ventilation application: heating
First output module: MA1
Setpoint device: with wall modules
User panel language: German
C-bus connection: via additional products
Modem connection: with additional products
Power supply: 230Vac
Housing (HxWxD): 138mm|186mm|145mm
Max. ambient temperature: 40C


Number of heating circuits: 1
Burner output: 1 stage
Second output module: empty


MCR200-82

Honeywell Controllers for multivalent heating applications, MCR200-81, MCR200-82

Microprocessor controller with variable hard- and software.
Applications:
MCR200-81: controller for 1 heating circuit, 1 mixed DHWS, 1 solar panel + pump, 1-stage burner
MCR200-82: controller for 2 heating circuits, 1 unmixed DHWS, 1 solar panel + pump, 1 buffer tank, 2-stage burner, optional solid panel boiler
Control output signal: potential free relays and/or 0..10V outputs
Hardware outputs: relays and/or 0..10V outputs
Control functions: main temperature control, limit control, cascade control, outside air compensation control
Modes of operation: off, eco, summer, manu, auto
Applicable sensor types: NTC 20 kohm
Hardware inputs: 12 universal, 1 digital
Digital input functions: DHW-switch, counter, heatmeter
Manual operation functions: manual switches/potentiometers for every output
Time program: annual clock for every control circuit/ quick access timer for every control circuit
LED functions: indicating LED's for every output
Output modules: three different output modules serve the necessary flexibility; MA1: one 3-position relay output + four relays; MA2: two 3-position outputs + two relays: MA3: four 0..10V outputs + three relays
Materials: ABS, UL-approved
Protection class: IP30
Memory back-up: lithium battery
Type of terminals: screw terminals
Mounting: wall and cabinet
Heating/Ventilation application: heating
First output module: MA1
Setpoint device: with wall modules
User panel language: German
C-bus connection: via additional products
Modem connection: with additional products
Power supply: 230Vac
Housing (HxWxD): 138mm|186mm|145mm
Max. ambient temperature: 40C


Number of heating circuits: 2
Burner output: 1/2 stages
Second output module: MA1


MCR200-MB1

Honeywell Additional products for MCR200 controllers

Operating unit
Product description: MCR200 operating unit


MCR200GV1

Honeywell Additional products for MCR200 controllers

Interfaces
Product description: MCR200 internal bus interface


MCR200GV2

Honeywell Additional products for MCR200 controllers

Interfaces
Product description: MCR200 external bus interface


MCR35

Honeywell Main, limit, outside temperature compensated controller heating/boiler, MCR35 MCR36 MCR40

Microprocessor controller with fixed hard- and software.
Applications:
MCR35: controller for 1 district heating circuit, 1 unmixed or mixed DHWS, 1 heat exchanger valve; German version
MCR40: controller for 1 heating circuit, 1 mixed DHWS, 1-stage burner; Optional: 2nd burner stage or unmixed heating circuit or circulation pump; German version
MCR36I: controller for 1 heating circuit, 1 mixed DHWS, 1-stage burner; Optional: 2nd burner stage or unmixed heating circuit or circulation pump; Italian version
Hardware outputs: relays and/or 0..10V output
Modes of operation: heating without time program, eco, summer, manu, auto
Applicable sensor types: NTC 20 kohm
Time program: one week clock for both heating circuits, separate week clock for Domestic hot water and circulation pump
Stand-alone operation: yes
Materials: ABS, UL-approved
Protection class: IP30
Memory back-up: Lithium battery
Type of terminals: screw terminals
Mounting: wall and cabinet
Number of heating circuits: 2
Heating/Ventilation application: heating
Setpoint device: with wall modules
Power supply: 230Vac
Batteries: included 3VLi
Housing (HxWxD): 92mm|186mm|109mm
Max. ambient temperature: 40C
Control functions: main temperature control, limit control, outside temperature compensation control
Hardware inputs: 7 universal
Control output signal: 6 relays and one 0..10V output


Burner output: no
User panel language: German


MCR36-I

Honeywell Main, limit, outside temperature compensated controller heating/boiler, MCR35 MCR36 MCR40

Microprocessor controller with fixed hard- and software.
Applications:
MCR35: controller for 1 district heating circuit, 1 unmixed or mixed DHWS, 1 heat exchanger valve; German version
MCR40: controller for 1 heating circuit, 1 mixed DHWS, 1-stage burner; Optional: 2nd burner stage or unmixed heating circuit or circulation pump; German version
MCR36I: controller for 1 heating circuit, 1 mixed DHWS, 1-stage burner; Optional: 2nd burner stage or unmixed heating circuit or circulation pump; Italian version
Hardware outputs: relays and/or 0..10V output
Modes of operation: heating without time program, eco, summer, manu, auto
Applicable sensor types: NTC 20 kohm
Time program: one week clock for both heating circuits, separate week clock for Domestic hot water and circulation pump
Stand-alone operation: yes
Materials: ABS, UL-approved
Protection class: IP30
Memory back-up: Lithium battery
Type of terminals: screw terminals
Mounting: wall and cabinet
Number of heating circuits: 2
Heating/Ventilation application: heating
Setpoint device: with wall modules
Power supply: 230Vac
Batteries: included 3VLi
Housing (HxWxD): 92mm|186mm|109mm
Max. ambient temperature: 40C
Control functions: main temperature control, limit control, outside temperature compensation control
Hardware inputs: 7 universal
Control output signal: 6 relays and one 0..10V output


Burner output: 1/2 stages
User panel language: Italian


MCR40

Honeywell Main, limit, outside temperature compensated controller heating/boiler, MCR35 MCR36 MCR40

Microprocessor controller with fixed hard- and software.
Applications:
MCR35: controller for 1 district heating circuit, 1 unmixed or mixed DHWS, 1 heat exchanger valve; German version
MCR40: controller for 1 heating circuit, 1 mixed DHWS, 1-stage burner; Optional: 2nd burner stage or unmixed heating circuit or circulation pump; German version
MCR36I: controller for 1 heating circuit, 1 mixed DHWS, 1-stage burner; Optional: 2nd burner stage or unmixed heating circuit or circulation pump; Italian version
Hardware outputs: relays and/or 0..10V output
Modes of operation: heating without time program, eco, summer, manu, auto
Applicable sensor types: NTC 20 kohm
Time program: one week clock for both heating circuits, separate week clock for Domestic hot water and circulation pump
Stand-alone operation: yes
Materials: ABS, UL-approved
Protection class: IP30
Memory back-up: Lithium battery
Type of terminals: screw terminals
Mounting: wall and cabinet
Number of heating circuits: 2
Heating/Ventilation application: heating
Setpoint device: with wall modules
Power supply: 230Vac
Batteries: included 3VLi
Housing (HxWxD): 92mm|186mm|109mm
Max. ambient temperature: 40C
Control functions: main temperature control, limit control, outside temperature compensation control
Hardware inputs: 7 universal
Control output signal: 6 relays and one 0..10V output


Burner output: 1/2 stages
User panel language: German


ML4195E1002

Honeywell Damper actuator 16 Nm spring return, ML4195E ML8195E ML7295E

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: on actuator hub
End switch function/capacity: SPDT switch 230V, 3A resistive, 1,5 A inductive for models with end switch
Shaft mounting: for round shafts 8..26 mm, square shafts 6..18 mm
Damper area 3 m2 with 16 Nm torque.
Built in rotation limiter: yes
Manual operation: yes
Runtime: 90s;50Hz
Cable length: 0.9m
Torque: 16Nm
Spring return: yes


Power supply: 230Vac
Control input signal: 2-pt
End switches: no
Position feedback: no


ML4195E1010

Honeywell Damper actuator 16 Nm spring return, ML4195E ML8195E ML7295E

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: on actuator hub
End switch function/capacity: SPDT switch 230V, 3A resistive, 1,5 A inductive for models with end switch
Shaft mounting: for round shafts 8..26 mm, square shafts 6..18 mm
Damper area 3 m2 with 16 Nm torque.
Built in rotation limiter: yes
Manual operation: yes
Runtime: 90s;50Hz
Cable length: 0.9m
Torque: 16Nm
Spring return: yes


Power supply: 230Vac
Control input signal: 2-pt
End switches: 2
Position feedback: no


ML6161B2024

Honeywell Damper actuator, ML6161B

Direct coupled actuators, non-spring return, for air dampers, ventilation flaps, louvers and VAV-units.
Position indication: on the housing
Shaft mounting: for round/square shafts 9..13 mm
Selectable 45o, 60o and 90o stroke in either clockwise or counterclockwise direction. Damper Actuator supplied with 4074ENY bag assembly.
Power supply: 24Vac
Control input signal: 3-pt
Built in rotation limiter: yes
Manual operation: yes
Torque: 4Nm


Runtime: 108s;50Hz


ML6161B2032

Honeywell Damper actuator, ML6161B

Direct coupled actuators, non-spring return, for air dampers, ventilation flaps, louvers and VAV-units.
Position indication: on the housing
Shaft mounting: for round/square shafts 9..13 mm
Selectable 45o, 60o and 90o stroke in either clockwise or counterclockwise direction. Damper Actuator supplied with 4074ENY bag assembly.
Power supply: 24Vac
Control input signal: 3-pt
Built in rotation limiter: yes
Manual operation: yes
Torque: 4Nm


Runtime: 504s;50Hz


ML6161E2005

Honeywell Damper actuator 4/8 Nm, ML6161E ML6174E ML6661E ML6674E ML7161E ML7174E

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: on shaft coupling
Shaft mounting: for round and square shafts 9,5...12,7 mm
Damper area 0,75 m2 with 4 Nm or 1,5 m2 with 8 Nm torque.
Manual operation: yes
Runtime: 108s;50Hz
Cable length: 0.9m


Power supply: 24Vac
Control input signal: 3-pt
Torque: 4Nm


ML6161E3011

Honeywell Damper actuator 5/10 Nm, ML6161E ML6661E ML7161E ML6174E ML6674E ML7174E

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: on the housing
Shaft mounting: for round shafts 8..16mm; square shafts 6..12mm
Angle of rotation limiters are part of the delivery.
Manual operation: yes
Runtime: 150s;50Hz
Cable length: 1m

For damper area of 0,8 square meters
Power supply: 24Vac
Control input signal: 3-pt
End switches: no
Torque: 5Nm


ML6161E3029

Honeywell Damper actuator 5/10 Nm, ML6161E ML6661E ML7161E ML6174E ML6674E ML7174E

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: on the housing
Shaft mounting: for round shafts 8..16mm; square shafts 6..12mm
Angle of rotation limiters are part of the delivery.
Manual operation: yes
Runtime: 150s;50Hz
Cable length: 1m

For damper area of 0,8 square meters
Power supply: 24Vac
Control input signal: 3-pt
End switches: 2
Torque: 5Nm


ML6174E2008

Honeywell Damper actuator 4/8 Nm, ML6161E ML6174E ML6661E ML6674E ML7161E ML7174E

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: on shaft coupling
Shaft mounting: for round and square shafts 9,5...12,7 mm
Damper area 0,75 m2 with 4 Nm or 1,5 m2 with 8 Nm torque.
Manual operation: yes
Runtime: 108s;50Hz
Cable length: 0.9m


Power supply: 24Vac
Control input signal: 3-pt
Torque: 8Nm


ML6174E3014

Honeywell Damper actuator 5/10 Nm, ML6161E ML6661E ML7161E ML6174E ML6674E ML7174E

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: on the housing
Shaft mounting: for round shafts 8..16mm; square shafts 6..12mm
Angle of rotation limiters are part of the delivery.
Manual operation: yes
Runtime: 150s;50Hz
Cable length: 1m

For damper area of 1,6 square meters
Power supply: 24Vac
Control input signal: 3-pt
End switches: no
Torque: 10Nm


ML6174E3022

Honeywell Damper actuator 5/10 Nm, ML6161E ML6661E ML7161E ML6174E ML6674E ML7174E

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: on the housing
Shaft mounting: for round shafts 8..16mm; square shafts 6..12mm
Angle of rotation limiters are part of the delivery.
Manual operation: yes
Runtime: 150s;50Hz
Cable length: 1m

For damper area of 1,6 square meters
Power supply: 24Vac
Control input signal: 3-pt
End switches: 2
Torque: 10Nm


ML6184E1009

Honeywell Damper actuator 17/34 Nm, ML6184E ML6684E ML7284E ML6194E ML6694E ML7294E

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: on actuator hub
End switch function/capacity: SPDT switch 230V, 3A resistive, 1,5 A inductive for models with end switch
Shaft mounting: for round and square shafts max. 13 mm
ML7284E1006 and ML7294E1006 with direct/reverse action switch. Damper area 3 m2 with 17 Nm or 6 m2 with 34 Nm torque.
Manual operation: yes
Cable length: 0.9m


Power supply: 24Vac
Control input signal: 3-pt
End switches: no
Position feedback: no
Runtime: 110s;50Hz
Torque: 17Nm


ML6184E1017

Honeywell Damper actuator 17/34 Nm, ML6184E ML6684E ML7284E ML6194E ML6694E ML7294E

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: on actuator hub
End switch function/capacity: SPDT switch 230V, 3A resistive, 1,5 A inductive for models with end switch
Shaft mounting: for round and square shafts max. 13 mm
ML7284E1006 and ML7294E1006 with direct/reverse action switch. Damper area 3 m2 with 17 Nm or 6 m2 with 34 Nm torque.
Manual operation: yes
Cable length: 0.9m


Power supply: 24Vac
Control input signal: 3-pt
End switches: 2
Position feedback: no
Runtime: 110s;50Hz
Torque: 17Nm


ML6194E1008

Honeywell Damper actuator 17/34 Nm, ML6184E ML6684E ML7284E ML6194E ML6694E ML7294E

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: on actuator hub
End switch function/capacity: SPDT switch 230V, 3A resistive, 1,5 A inductive for models with end switch
Shaft mounting: for round and square shafts max. 13 mm
ML7284E1006 and ML7294E1006 with direct/reverse action switch. Damper area 3 m2 with 17 Nm or 6 m2 with 34 Nm torque.
Manual operation: yes
Cable length: 0.9m


Power supply: 24Vac
Control input signal: 3-pt
End switches: no
Position feedback: no
Runtime: 200s;50Hz
Torque: 34Nm


ML6425B2015

Honeywell Actuator 3-pt for district heating, 500 N, spring return, ML6425B (for valves V5872B, V5872D)

Electrical actuator floating control, for valve series: V5872.
Protection class: IP54
Actuator in combination with V5872 valve approved according DIN32730.
Stem force: 500N
Control input signal: 3-pt
Stroke: 6.5mm
Power loss action: stem retracts
Manual operation: yes
Runtime: 36s
Spring return timing: 5s


Power supply: 24Vac


ML6425B2023

Honeywell Actuator 3-pt for district heating, 500 N, spring return, ML6425B (for valves V5872B, V5872D)

Electrical actuator floating control, for valve series: V5872.
Protection class: IP54
Actuator in combination with V5872 valve approved according DIN32730.
Stem force: 500N
Control input signal: 3-pt
Stroke: 6.5mm
Power loss action: stem retracts
Manual operation: yes
Runtime: 36s
Spring return timing: 5s


Power supply: 230Vac


ML6661E2004

Honeywell Damper actuator 4/8 Nm, ML6161E ML6174E ML6661E ML6674E ML7161E ML7174E

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: on shaft coupling
Shaft mounting: for round and square shafts 9,5...12,7 mm
Damper area 0,75 m2 with 4 Nm or 1,5 m2 with 8 Nm torque.
Manual operation: yes
Runtime: 108s;50Hz
Cable length: 0.9m


Power supply: 230Vac
Control input signal: 3-pt
Torque: 4Nm


ML6661E3010

Honeywell Damper actuator 5/10 Nm, ML6161E ML6661E ML7161E ML6174E ML6674E ML7174E

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: on the housing
Shaft mounting: for round shafts 8..16mm; square shafts 6..12mm
Angle of rotation limiters are part of the delivery.
Manual operation: yes
Runtime: 150s;50Hz
Cable length: 1m

For damper area of 0,8 square meters
Power supply: 230Vac
Control input signal: 3-pt
End switches: no
Torque: 5Nm


ML6661E3028

Honeywell Damper actuator 5/10 Nm, ML6161E ML6661E ML7161E ML6174E ML6674E ML7174E

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: on the housing
Shaft mounting: for round shafts 8..16mm; square shafts 6..12mm
Angle of rotation limiters are part of the delivery.
Manual operation: yes
Runtime: 150s;50Hz
Cable length: 1m

For damper area of 0,8 square meters
Power supply: 230Vac
Control input signal: 3-pt
End switches: 2
Torque: 5Nm


ML6674E2007

Honeywell Damper actuator 4/8 Nm, ML6161E ML6174E ML6661E ML6674E ML7161E ML7174E

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: on shaft coupling
Shaft mounting: for round and square shafts 9,5...12,7 mm
Damper area 0,75 m2 with 4 Nm or 1,5 m2 with 8 Nm torque.
Manual operation: yes
Runtime: 108s;50Hz
Cable length: 0.9m


Power supply: 230Vac
Control input signal: 3-pt
Torque: 8Nm


ML6674E3013

Honeywell Damper actuator 5/10 Nm, ML6161E ML6661E ML7161E ML6174E ML6674E ML7174E

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: on the housing
Shaft mounting: for round shafts 8..16mm; square shafts 6..12mm
Angle of rotation limiters are part of the delivery.
Manual operation: yes
Runtime: 150s;50Hz
Cable length: 1m

For damper area of 1,6 square meters
Power supply: 230Vac
Control input signal: 3-pt
End switches: no
Torque: 10Nm


ML6674E3021

Honeywell Damper actuator 5/10 Nm, ML6161E ML6661E ML7161E ML6174E ML6674E ML7174E

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: on the housing
Shaft mounting: for round shafts 8..16mm; square shafts 6..12mm
Angle of rotation limiters are part of the delivery.
Manual operation: yes
Runtime: 150s;50Hz
Cable length: 1m

For damper area of 1,6 square meters
Power supply: 230Vac
Control input signal: 3-pt
End switches: 2
Torque: 10Nm


ML6684E1008

Honeywell Damper actuator 17/34 Nm, ML6184E ML6684E ML7284E ML6194E ML6694E ML7294E

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: on actuator hub
End switch function/capacity: SPDT switch 230V, 3A resistive, 1,5 A inductive for models with end switch
Shaft mounting: for round and square shafts max. 13 mm
ML7284E1006 and ML7294E1006 with direct/reverse action switch. Damper area 3 m2 with 17 Nm or 6 m2 with 34 Nm torque.
Manual operation: yes
Cable length: 0.9m


Power supply: 230Vac
Control input signal: 3-pt
End switches: no
Position feedback: no
Runtime: 110s;50Hz
Torque: 17Nm


ML6684E1016

Honeywell Damper actuator 17/34 Nm, ML6184E ML6684E ML7284E ML6194E ML6694E ML7294E

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: on actuator hub
End switch function/capacity: SPDT switch 230V, 3A resistive, 1,5 A inductive for models with end switch
Shaft mounting: for round and square shafts max. 13 mm
ML7284E1006 and ML7294E1006 with direct/reverse action switch. Damper area 3 m2 with 17 Nm or 6 m2 with 34 Nm torque.
Manual operation: yes
Cable length: 0.9m


Power supply: 230Vac
Control input signal: 3-pt
End switches: 2
Position feedback: no
Runtime: 110s;50Hz
Torque: 17Nm


ML6694E1007

Honeywell Damper actuator 17/34 Nm, ML6184E ML6684E ML7284E ML6194E ML6694E ML7294E

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: on actuator hub
End switch function/capacity: SPDT switch 230V, 3A resistive, 1,5 A inductive for models with end switch
Shaft mounting: for round and square shafts max. 13 mm
ML7284E1006 and ML7294E1006 with direct/reverse action switch. Damper area 3 m2 with 17 Nm or 6 m2 with 34 Nm torque.
Manual operation: yes
Cable length: 0.9m


Power supply: 230Vac
Control input signal: 3-pt
End switches: 2
Position feedback: no
Runtime: 200s;50Hz
Torque: 34Nm


ML7161E2004

Honeywell Damper actuator 4/8 Nm, ML6161E ML6174E ML6661E ML6674E ML7161E ML7174E

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: on shaft coupling
Shaft mounting: for round and square shafts 9,5...12,7 mm
Damper area 0,75 m2 with 4 Nm or 1,5 m2 with 8 Nm torque.
Manual operation: yes
Runtime: 108s;50Hz
Cable length: 0.9m


Power supply: 24Vac
Control input signal: 2..10V=
Torque: 4Nm


ML7161E3010

Honeywell Damper actuator 5/10 Nm, ML6161E ML6661E ML7161E ML6174E ML6674E ML7174E

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: on the housing
Shaft mounting: for round shafts 8..16mm; square shafts 6..12mm
Angle of rotation limiters are part of the delivery.
Manual operation: yes
Runtime: 150s;50Hz
Cable length: 1m

For damper area of 0,8 square meters
Power supply: 24Vac
Control input signal: 0..10V=
End switches: no
Torque: 5Nm


ML7161E3028

Honeywell Damper actuator 5/10 Nm, ML6161E ML6661E ML7161E ML6174E ML6674E ML7174E

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: on the housing
Shaft mounting: for round shafts 8..16mm; square shafts 6..12mm
Angle of rotation limiters are part of the delivery.
Manual operation: yes
Runtime: 150s;50Hz
Cable length: 1m

For damper area of 0,8 square meters
Power supply: 24Vac
Control input signal: 0..10V=
End switches: 2
Torque: 5Nm


ML7174E2007

Honeywell Damper actuator 4/8 Nm, ML6161E ML6174E ML6661E ML6674E ML7161E ML7174E

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: on shaft coupling
Shaft mounting: for round and square shafts 9,5...12,7 mm
Damper area 0,75 m2 with 4 Nm or 1,5 m2 with 8 Nm torque.
Manual operation: yes
Runtime: 108s;50Hz
Cable length: 0.9m


Power supply: 24Vac
Control input signal: 2..10V=
Torque: 8Nm


ML7174E3013

Honeywell Damper actuator 5/10 Nm, ML6161E ML6661E ML7161E ML6174E ML6674E ML7174E

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: on the housing
Shaft mounting: for round shafts 8..16mm; square shafts 6..12mm
Angle of rotation limiters are part of the delivery.
Manual operation: yes
Runtime: 150s;50Hz
Cable length: 1m

For damper area of 1,6 square meters
Power supply: 24Vac
Control input signal: 0..10V=
End switches: no
Torque: 10Nm


ML7174E3021

Honeywell Damper actuator 5/10 Nm, ML6161E ML6661E ML7161E ML6174E ML6674E ML7174E

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: on the housing
Shaft mounting: for round shafts 8..16mm; square shafts 6..12mm
Angle of rotation limiters are part of the delivery.
Manual operation: yes
Runtime: 150s;50Hz
Cable length: 1m

For damper area of 1,6 square meters
Power supply: 24Vac
Control input signal: 0..10V=
End switches: 2
Torque: 10Nm


ML7284E1006

Honeywell Damper actuator 17/34 Nm, ML6184E ML6684E ML7284E ML6194E ML6694E ML7294E

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: on actuator hub
End switch function/capacity: SPDT switch 230V, 3A resistive, 1,5 A inductive for models with end switch
Shaft mounting: for round and square shafts max. 13 mm
ML7284E1006 and ML7294E1006 with direct/reverse action switch. Damper area 3 m2 with 17 Nm or 6 m2 with 34 Nm torque.
Manual operation: yes
Cable length: 0.9m


Power supply: 24Vac
Control input signal: 0..10V=
End switches: no
Position feedback: 2..10V=
Runtime: 110s;50Hz
Torque: 17Nm


ML7285E1016

Honeywell Damper actuator 6 Nm spring return, ML7285E1016

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: on actuator hub
End switch function/capacity: SPDT switch 230V, 3A resistive, 1,5 A inductive for models with end switch
Shaft mounting: for round and square shafts 12 mm
Damper area 1 m2 with 6 Nm torque.
Power supply: 24Vac
Control input signal: 0..10V=
Manual operation: no
Position feedback: 2..10V=
Runtime: 106s;50Hz
Cable length: 0.9m
Torque: 6Nm
Spring return: yes


ML7294E1005

Honeywell Damper actuator 17/34 Nm, ML6184E ML6684E ML7284E ML6194E ML6694E ML7294E

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: on actuator hub
End switch function/capacity: SPDT switch 230V, 3A resistive, 1,5 A inductive for models with end switch
Shaft mounting: for round and square shafts max. 13 mm
ML7284E1006 and ML7294E1006 with direct/reverse action switch. Damper area 3 m2 with 17 Nm or 6 m2 with 34 Nm torque.
Manual operation: yes
Cable length: 0.9m


Power supply: 24Vac
Control input signal: 0..10V=
End switches: no
Position feedback: 2..10V=
Runtime: 200s;50Hz
Torque: 34Nm


ML7295E1007

Honeywell Damper actuator 16 Nm spring return, ML4195E ML8195E ML7295E

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: on actuator hub
End switch function/capacity: SPDT switch 230V, 3A resistive, 1,5 A inductive for models with end switch
Shaft mounting: for round shafts 8..26 mm, square shafts 6..18 mm
Damper area 3 m2 with 16 Nm torque.
Built in rotation limiter: yes
Manual operation: yes
Runtime: 90s;50Hz
Cable length: 0.9m
Torque: 16Nm
Spring return: yes


Power supply: 24Vac
Control input signal: 0..10V=
End switches: no
Position feedback: 0..10V=


ML7295E1015

Honeywell Damper actuator 16 Nm spring return, ML4195E ML8195E ML7295E

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: on actuator hub
End switch function/capacity: SPDT switch 230V, 3A resistive, 1,5 A inductive for models with end switch
Shaft mounting: for round shafts 8..26 mm, square shafts 6..18 mm
Damper area 3 m2 with 16 Nm torque.
Built in rotation limiter: yes
Manual operation: yes
Runtime: 90s;50Hz
Cable length: 0.9m
Torque: 16Nm
Spring return: yes


Power supply: 24Vac
Control input signal: 0..10V=
End switches: 2
Position feedback: 0..10V=


ML7420A2016

Honeywell Actuator 0..10V for district heating, DHWS, 500 N, ML7420A2016 (for valves V5872B, V5872D)

Electrical actuator modulating control, for valve series: V5872.
Protection class: IP54
Stem position at control signal loss: 0 volt signal position
The control action is reversable. Actuator in combination with V5872 valve approved according DIN32730, VTT approval for DHWS applications.
Stem force: 500N
Power supply: 24Vac
Control input signal: 0/2..10V=
Stroke: 6.5mm
Manual operation: yes
Runtime: 10s


ML7420G1004

Honeywell Actuator LON, 20 mm 600 N, ML7420G

Electrical actuator with LON capabilities, for valve series: V5011, V5013, V5016A, V5025, V5049, V5050, V5328, V5329.
Protection class: IP54
Position indication: scale plate
Stem position at control signal loss: selectable: closed, half open, open
End switches: optional
The control action is reversable. Actuator parameter set can be defined by using the available Plug In.
Stem force: 600N
Power supply: 24Vac
Control input signal: LON
Stroke: 20mm
Manual operation: yes
Runtime: 1.0min


ML8195E1003

Honeywell Damper actuator 16 Nm spring return, ML4195E ML8195E ML7295E

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: on actuator hub
End switch function/capacity: SPDT switch 230V, 3A resistive, 1,5 A inductive for models with end switch
Shaft mounting: for round shafts 8..26 mm, square shafts 6..18 mm
Damper area 3 m2 with 16 Nm torque.
Built in rotation limiter: yes
Manual operation: yes
Runtime: 90s;50Hz
Cable length: 0.9m
Torque: 16Nm
Spring return: yes


Power supply: 24Vac
Control input signal: 2-pt
End switches: no
Position feedback: no


ML8195E1011

Honeywell Damper actuator 16 Nm spring return, ML4195E ML8195E ML7295E

Direct coupled actuators for air dampers, ventilation flaps, louvers and VAV-units.
Protection class: IP54
Position indication: on actuator hub
End switch function/capacity: SPDT switch 230V, 3A resistive, 1,5 A inductive for models with end switch
Shaft mounting: for round shafts 8..26 mm, square shafts 6..18 mm
Damper area 3 m2 with 16 Nm torque.
Built in rotation limiter: yes
Manual operation: yes
Runtime: 90s;50Hz
Cable length: 0.9m
Torque: 16Nm
Spring return: yes


Power supply: 24Vac
Control input signal: 2-pt
End switches: 2
Position feedback: no


MT-CABLE-HCE40

Honeywell Zone control system HCE40
Accessories

Elongation cable for actuators, 1 meter, 5 pieces



MT010-3MN

Honeywell Actuator thermoelectric 0..10V for terminal unit/radiator valves, 2,5 mm 90 N, MT010

Electrical actuator for valve series: V58xxA/C (DN15-20), V90, V100, V300, V2000, V2464, V2474, VSO.
For thermostatic radiator valves with connection size: M30 x 1,5.
Protection class: IP54
Effective stroke for Honeywell valves 2,5 mm; maximum stroke 3,5 mm.
Supply voltage: 24 Vac
Stem force: 90N
Control input signal: 0..10V=
Stroke: 2.5mm
Power loss action: stem extends
Runtime: 75s
Initial current: 0.25A

2,5 mm; 90 N
Cable length: 3m


MT010-N

Honeywell Actuator thermoelectric 0..10V for terminal unit/radiator valves, 2,5 mm 90 N, MT010

Electrical actuator for valve series: V58xxA/C (DN15-20), V90, V100, V300, V2000, V2464, V2474, VSO.
For thermostatic radiator valves with connection size: M30 x 1,5.
Protection class: IP54
Effective stroke for Honeywell valves 2,5 mm; maximum stroke 3,5 mm.
Supply voltage: 24 Vac
Stem force: 90N
Control input signal: 0..10V=
Stroke: 2.5mm
Power loss action: stem extends
Runtime: 75s
Initial current: 0.25A

2,5 mm; 90 N
Cable length: 1m


MT4-024-NOx

Honeywell Zone control system HCE40
Actuators

Thermal actuator, 24 Vac



N12-100

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ)
Accessories

Immersion tube, 1/2 NPT, immersion length 100 mm



N12-150

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ)
Accessories

Immersion tube, 1/2 NPT, immersion length 150 mm



N12-200

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ)
Accessories

Immersion tube, 1/2 NPT, immersion length 200 mm



N12-250

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ)
Accessories

Immersion tube, 1/2 NPT, immersion length 250 mm



NBOX/CNC2/230

Honeywell Trend LAN Communication Nodes Controller CNC2, INC2

The Communications Node Controller (CNC2) interfaces between a Trend Supervisor or Software Tool and the Trend network (RS232 to Lan).
The Internetwork Node Controller (INC2) allows Lans to be interconnected to create very large networks. Up to 116 INC2s can be connected to the internetwork. An INC2 may have up to 116 devices on its Lan.
The LNC2 Lancard Node Controller is a PCI bus card that interfaces between a Trend Supervisor or Software Tool and the Trend network.
Trend Node cards (CNC/INC) available in an IP30 enclosure (NBOX) or can be supplied without an enclosure for mounting inside a Trend device, e.g. an IQ controller. There are 230 V and 24 V supply versions. Boxed battery backed versions are available (230 Vac only) and an optional metal enclosure with cable glanding knockouts is also available.
Network: Trend LAN

CNC2 (Communication Node Controller)
Model: Communications Node Controller
Power: 230Vac
Comments: NBOX IP30


NBOX/CNC2/24V

Honeywell Trend LAN Communication Nodes Controller CNC2, INC2

The Communications Node Controller (CNC2) interfaces between a Trend Supervisor or Software Tool and the Trend network (RS232 to Lan).
The Internetwork Node Controller (INC2) allows Lans to be interconnected to create very large networks. Up to 116 INC2s can be connected to the internetwork. An INC2 may have up to 116 devices on its Lan.
The LNC2 Lancard Node Controller is a PCI bus card that interfaces between a Trend Supervisor or Software Tool and the Trend network.
Trend Node cards (CNC/INC) available in an IP30 enclosure (NBOX) or can be supplied without an enclosure for mounting inside a Trend device, e.g. an IQ controller. There are 230 V and 24 V supply versions. Boxed battery backed versions are available (230 Vac only) and an optional metal enclosure with cable glanding knockouts is also available.
Network: Trend LAN

CNC2 (Communication Node Controller)
Model: Communications Node Controller
Power: 24Vac
Comments: NBOX IP30


NBOX/EINC/230

Honeywell Ethernet Internetwork Node Controller (EINC)

The EINC, Ethernet Internetwork Node Controller, provides the means by which the Building Management System network can incorporate an Ethernet network. The EINC operates at the internetwork level, including the necessary support for WANs (e.g. TMN support). It also provides virtual CNCs which allow supervisory or tool software running in PCs connected to the Ethernet network to connect to the BMS system.
The EDS-205 and EDS-305-M-SC are industrial 5-port Ethernet switch that supports IEE 820.3/820.3u/820.3x with 10/100M, full half duplex, MDI/MDIX autosensing RJ45 ports. The EDS-305-M-SC also has a built in relay warning function which alerts maintainers when power failures or port breaks occur and is equipped with 4 10/100T(X) ports and 1 single mode 100baseFX port, SC connector. Both devices operate over a wide temperature range and are DIN rail mounting, making them ideal for most industrial environments.
The IMC-101-M-SC,which has been designed for stable operation in industrial environments, provides conversion between 10/100BaseT(X) and 100 BaseFX. It rated to operate at temperature ranging from 0 - 60oC, and is DIN rail mounting, making it ideal for most industrial environments.

EINC (Ethernet Internetwork Node Controller)
Model: Ethernet INC
Network: TCP/IP + Trend LAN
Power: 230Vac
Comments: NBOX IP30


NBOX/INC2/230

Honeywell Trend LAN Communication Nodes Controller CNC2, INC2

The Communications Node Controller (CNC2) interfaces between a Trend Supervisor or Software Tool and the Trend network (RS232 to Lan).
The Internetwork Node Controller (INC2) allows Lans to be interconnected to create very large networks. Up to 116 INC2s can be connected to the internetwork. An INC2 may have up to 116 devices on its Lan.
The LNC2 Lancard Node Controller is a PCI bus card that interfaces between a Trend Supervisor or Software Tool and the Trend network.
Trend Node cards (CNC/INC) available in an IP30 enclosure (NBOX) or can be supplied without an enclosure for mounting inside a Trend device, e.g. an IQ controller. There are 230 V and 24 V supply versions. Boxed battery backed versions are available (230 Vac only) and an optional metal enclosure with cable glanding knockouts is also available.
Network: Trend LAN

INC (Internetwork Node Controller)
Model: Internetwork Node Controller
Power: 230Vac
Comments: NBOX IP30


NBOX/INC2/24V

Honeywell Trend LAN Communication Nodes Controller CNC2, INC2

The Communications Node Controller (CNC2) interfaces between a Trend Supervisor or Software Tool and the Trend network (RS232 to Lan).
The Internetwork Node Controller (INC2) allows Lans to be interconnected to create very large networks. Up to 116 INC2s can be connected to the internetwork. An INC2 may have up to 116 devices on its Lan.
The LNC2 Lancard Node Controller is a PCI bus card that interfaces between a Trend Supervisor or Software Tool and the Trend network.
Trend Node cards (CNC/INC) available in an IP30 enclosure (NBOX) or can be supplied without an enclosure for mounting inside a Trend device, e.g. an IQ controller. There are 230 V and 24 V supply versions. Boxed battery backed versions are available (230 Vac only) and an optional metal enclosure with cable glanding knockouts is also available.
Network: Trend LAN

INC (Internetwork Node Controller)
Model: Internetwork Node Controller
Power: 24Vac
Comments: NBOX IP30


NBOX/XNC220/230

Honeywell IQ2 Integration Controllers, NBOX XNC

The NBOX/XNC220 provides a flexible way of interfacing the IQ system with 3rd party systems. It allows parameters within the 3rd party system to be adjusted from IQ system Supervisor. It has an optional integral 2-line display, and limited I/O capability.
Network: Trend LAN
Model: Configurable Node Controller
Comments: NBOX IP30

XNC Cards
Integration possible with: RS232
Power: 230Vac


NBOX/XNC220/24

Honeywell IQ2 Integration Controllers, NBOX XNC

The NBOX/XNC220 provides a flexible way of interfacing the IQ system with 3rd party systems. It allows parameters within the 3rd party system to be adjusted from IQ system Supervisor. It has an optional integral 2-line display, and limited I/O capability.
Network: Trend LAN
Model: Configurable Node Controller
Comments: NBOX IP30

XNC Cards
Integration possible with: RS232
Power: 24Vac/dc


NBOX/XNC220/485/230

Honeywell IQ2 Integration Controllers, NBOX XNC

The NBOX/XNC220 provides a flexible way of interfacing the IQ system with 3rd party systems. It allows parameters within the 3rd party system to be adjusted from IQ system Supervisor. It has an optional integral 2-line display, and limited I/O capability.
Network: Trend LAN
Model: Configurable Node Controller
Comments: NBOX IP30

XNC Cards
Integration possible with: RS485
Power: 230Vac


NBOX/XNC220/485/24

Honeywell IQ2 Integration Controllers, NBOX XNC

The NBOX/XNC220 provides a flexible way of interfacing the IQ system with 3rd party systems. It allows parameters within the 3rd party system to be adjusted from IQ system Supervisor. It has an optional integral 2-line display, and limited I/O capability.
Network: Trend LAN
Model: Configurable Node Controller
Comments: NBOX IP30

XNC Cards
Integration possible with: RS485
Power: 24Vac/dc


NBOXB/CNC2/230

Honeywell Trend LAN Communication Nodes Controller CNC2, INC2

The Communications Node Controller (CNC2) interfaces between a Trend Supervisor or Software Tool and the Trend network (RS232 to Lan).
The Internetwork Node Controller (INC2) allows Lans to be interconnected to create very large networks. Up to 116 INC2s can be connected to the internetwork. An INC2 may have up to 116 devices on its Lan.
The LNC2 Lancard Node Controller is a PCI bus card that interfaces between a Trend Supervisor or Software Tool and the Trend network.
Trend Node cards (CNC/INC) available in an IP30 enclosure (NBOX) or can be supplied without an enclosure for mounting inside a Trend device, e.g. an IQ controller. There are 230 V and 24 V supply versions. Boxed battery backed versions are available (230 Vac only) and an optional metal enclosure with cable glanding knockouts is also available.
Network: Trend LAN

CNC2 (Communication Node Controller)
Model: Communications Node Controller
Power: 230Vac
Comments: NBOXB IP30 battery backup


NBOXB/INC2/230

Honeywell Trend LAN Communication Nodes Controller CNC2, INC2

The Communications Node Controller (CNC2) interfaces between a Trend Supervisor or Software Tool and the Trend network (RS232 to Lan).
The Internetwork Node Controller (INC2) allows Lans to be interconnected to create very large networks. Up to 116 INC2s can be connected to the internetwork. An INC2 may have up to 116 devices on its Lan.
The LNC2 Lancard Node Controller is a PCI bus card that interfaces between a Trend Supervisor or Software Tool and the Trend network.
Trend Node cards (CNC/INC) available in an IP30 enclosure (NBOX) or can be supplied without an enclosure for mounting inside a Trend device, e.g. an IQ controller. There are 230 V and 24 V supply versions. Boxed battery backed versions are available (230 Vac only) and an optional metal enclosure with cable glanding knockouts is also available.
Network: Trend LAN

INC (Internetwork Node Controller)
Model: Internetwork Node Controller
Power: 230Vac
Comments: NBOXB IP30 battery backup


NVAC/AC/AMB/G

Honeywell Window actuators NVWA
Accessories

Additional set of 2 mounting brackets (grey colour)



NVAC/AC/AMB/W

Honeywell Window actuators NVWA
Accessories

Additional set of 2 mounting brackets (white colour)



NVAC/ACB/SS

Honeywell Window actuators NVWA
Accessories

Additional actuator chain bracket



NVAC/CAB/EXT/2

Honeywell Window actuators NVWA
Accessories

Additional actuator synchronisation cable 2 m with 0.1 m spur (0.75 mm2).



NVAC/CAB/EXT/6

Honeywell Window actuators NVWA
Accessories

Additional 6 m actuator extension cable (0.75 mm2)



NVAC/SW/MAN

Honeywell Peripheral equipment for Natural Ventilation, NVAC

In order for the Natural Ventilation system to function within a building management system it is necessary to monitor air characteristics and control the system according to user requirements. Trend currently have a large number of periphery devices that allow the control system to operate effectively based on the feedback from air quality sensors, wind speed and direction, rain sensors and user needs.
Peripheral devices include:
Manual override switch for use with NV system motor controller.
A wall mounted switch which allows the user to override the motor controller. It is wall mounted and can be set to open, auto or close.


NVMC/04/BAC/230

Honeywell Motor Controllers NVMC

The Trend NV natural ventilation system uses fresh air as part of the building temperature control, and to control air quality. Natural ventilation reduces CO2 emissions by reducing electricity usage. MotorLinkTM technology gives intelligent window control with positional feedback and multiple actuator synchronisation.
The Trend NV natural ventilation system uses fresh air as part of the building temperature control, and to control air quality. Natural ventilation reduces CO2 emissions by reducing electricity usage. MotorLinkTM technology gives intelligent window control with positional feedback and multiple actuator synchronisation.
NOTE: A wide range of compatible actuators are available in various stroke lengths and finishes for use on both inward and outward opening windows and with top/side/bottom mounting options. For further details of these products please contact your local Trend supplier.
Features: Features include:
BACnet motor controllers for up to 4 or 8 actuator control lines
Window actuators with 265 or 500 mm stroke, available singly or in synchronised pairs, grey or white.
Accurate window position control with positional feedback.
Full metal housing for compliance with RFI regulations and safety
Three speed control; manual control provides faster more audible speed than normal automatic action
Multiple actuators on one window fully synchronised by intercommunication.
Pressure safety function reduces risk of entrapment.
The reversing function takes pressure off the window on closure to extend window gasket life.
CE-Mark declaration enclosed in manual
CE-Mark declaration enclosed in manual
Rated voltage: 230V50Hz
Serial communication: BACnet over MSTP
Emissions: Complies with the relevant requirements for components laid down in Council Directive 73/23/EEC and conforms with the provisions of Council Directive 89/336/EEC
Safety: Manufatcured according to: EN 55022, EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3
Max. number of actuators: 16
Protection class: IP20
Dimensions device (LxWxH): 455mm|240mm|95mm

NV Motor Controllers
Model: NV system motor controller for up to 4 motor lines (16 windows max.) including 2 keys + M20 cable gland
Number of motor lines: 4


NVMC/08/BAC/230

Honeywell Motor Controllers NVMC

The Trend NV natural ventilation system uses fresh air as part of the building temperature control, and to control air quality. Natural ventilation reduces CO2 emissions by reducing electricity usage. MotorLinkTM technology gives intelligent window control with positional feedback and multiple actuator synchronisation.
The Trend NV natural ventilation system uses fresh air as part of the building temperature control, and to control air quality. Natural ventilation reduces CO2 emissions by reducing electricity usage. MotorLinkTM technology gives intelligent window control with positional feedback and multiple actuator synchronisation.
NOTE: A wide range of compatible actuators are available in various stroke lengths and finishes for use on both inward and outward opening windows and with top/side/bottom mounting options. For further details of these products please contact your local Trend supplier.
Features: Features include:
BACnet motor controllers for up to 4 or 8 actuator control lines
Window actuators with 265 or 500 mm stroke, available singly or in synchronised pairs, grey or white.
Accurate window position control with positional feedback.
Full metal housing for compliance with RFI regulations and safety
Three speed control; manual control provides faster more audible speed than normal automatic action
Multiple actuators on one window fully synchronised by intercommunication.
Pressure safety function reduces risk of entrapment.
The reversing function takes pressure off the window on closure to extend window gasket life.
CE-Mark declaration enclosed in manual
CE-Mark declaration enclosed in manual
Rated voltage: 230V50Hz
Serial communication: BACnet over MSTP
Emissions: Complies with the relevant requirements for components laid down in Council Directive 73/23/EEC and conforms with the provisions of Council Directive 89/336/EEC
Safety: Manufatcured according to: EN 55022, EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3
Max. number of actuators: 16
Protection class: IP20
Dimensions device (LxWxH): 455mm|240mm|95mm

NV Motor Controllers
Model: NV system motor controller for up to 8 motor lines (16 windows max.) including 2 keys + M20 cable gland
Number of motor lines: 8


NVWA/D/G/265

Honeywell Window actuators NVWA

The NVWA actuators are supplied in two sizes with a 265 mm chain or with a 500 mm chain. They can be supplied with either a white or grey lacquered finish. They can be supplied either individually or as a synchronised pair.
Features: Features include:
Full synchronisation without external synchronisation unit.
Communication between actuators to ensure synchronised operation.
Can be used on both inward and outward opening windows.
Mounting brackets included which allow top, bottom or side installation.
Multiple actuators on one window fully synchronised by intercommunication.
Max. current (A): 1

NV Window Actuators
Stroke: 265
Single/Double: Double
Colour: grey
Dimensions device (LxWxH): 332mm|47mm|59mm


NVWA/D/G/500

Honeywell Window actuators NVWA

The NVWA actuators are supplied in two sizes with a 265 mm chain or with a 500 mm chain. They can be supplied with either a white or grey lacquered finish. They can be supplied either individually or as a synchronised pair.
Features: Features include:
Full synchronisation without external synchronisation unit.
Communication between actuators to ensure synchronised operation.
Can be used on both inward and outward opening windows.
Mounting brackets included which allow top, bottom or side installation.
Multiple actuators on one window fully synchronised by intercommunication.
Max. current (A): 1

NV Window Actuators
Stroke: 500
Single/Double: Double
Colour: grey
Dimensions device (LxWxH): 610mm|47mm|59mm


NVWA/D/W/265

Honeywell Window actuators NVWA

The NVWA actuators are supplied in two sizes with a 265 mm chain or with a 500 mm chain. They can be supplied with either a white or grey lacquered finish. They can be supplied either individually or as a synchronised pair.
Features: Features include:
Full synchronisation without external synchronisation unit.
Communication between actuators to ensure synchronised operation.
Can be used on both inward and outward opening windows.
Mounting brackets included which allow top, bottom or side installation.
Multiple actuators on one window fully synchronised by intercommunication.
Max. current (A): 1

NV Window Actuators
Stroke: 265
Single/Double: Double
Colour: white
Dimensions device (LxWxH): 332mm|47mm|59mm


NVWA/D/W/500

Honeywell Window actuators NVWA

The NVWA actuators are supplied in two sizes with a 265 mm chain or with a 500 mm chain. They can be supplied with either a white or grey lacquered finish. They can be supplied either individually or as a synchronised pair.
Features: Features include:
Full synchronisation without external synchronisation unit.
Communication between actuators to ensure synchronised operation.
Can be used on both inward and outward opening windows.
Mounting brackets included which allow top, bottom or side installation.
Multiple actuators on one window fully synchronised by intercommunication.
Max. current (A): 1

NV Window Actuators
Stroke: 500
Single/Double: Double
Colour: white
Dimensions device (LxWxH): 610mm|47mm|59mm


NVWA/S/G/265

Honeywell Window actuators NVWA

The NVWA actuators are supplied in two sizes with a 265 mm chain or with a 500 mm chain. They can be supplied with either a white or grey lacquered finish. They can be supplied either individually or as a synchronised pair.
Features: Features include:
Full synchronisation without external synchronisation unit.
Communication between actuators to ensure synchronised operation.
Can be used on both inward and outward opening windows.
Mounting brackets included which allow top, bottom or side installation.
Multiple actuators on one window fully synchronised by intercommunication.
Max. current (A): 1

NV Window Actuators
Stroke: 265
Single/Double: Single
Colour: grey
Dimensions device (LxWxH): 332mm|47mm|59mm


NVWA/S/G/500

Honeywell Window actuators NVWA

The NVWA actuators are supplied in two sizes with a 265 mm chain or with a 500 mm chain. They can be supplied with either a white or grey lacquered finish. They can be supplied either individually or as a synchronised pair.
Features: Features include:
Full synchronisation without external synchronisation unit.
Communication between actuators to ensure synchronised operation.
Can be used on both inward and outward opening windows.
Mounting brackets included which allow top, bottom or side installation.
Multiple actuators on one window fully synchronised by intercommunication.
Max. current (A): 1

NV Window Actuators
Stroke: 500
Single/Double: Single
Colour: grey
Dimensions device (LxWxH): 610mm|47mm|59mm


NVWA/S/W/265

Honeywell Window actuators NVWA

The NVWA actuators are supplied in two sizes with a 265 mm chain or with a 500 mm chain. They can be supplied with either a white or grey lacquered finish. They can be supplied either individually or as a synchronised pair.
Features: Features include:
Full synchronisation without external synchronisation unit.
Communication between actuators to ensure synchronised operation.
Can be used on both inward and outward opening windows.
Mounting brackets included which allow top, bottom or side installation.
Multiple actuators on one window fully synchronised by intercommunication.
Max. current (A): 1

NV Window Actuators
Stroke: 265
Single/Double: Single
Colour: white
Dimensions device (LxWxH): 332mm|47mm|59mm


NVWA/S/W/500

Honeywell Window actuators NVWA

The NVWA actuators are supplied in two sizes with a 265 mm chain or with a 500 mm chain. They can be supplied with either a white or grey lacquered finish. They can be supplied either individually or as a synchronised pair.
Features: Features include:
Full synchronisation without external synchronisation unit.
Communication between actuators to ensure synchronised operation.
Can be used on both inward and outward opening windows.
Mounting brackets included which allow top, bottom or side installation.
Multiple actuators on one window fully synchronised by intercommunication.
Max. current (A): 1

NV Window Actuators
Stroke: 500
Single/Double: Single
Colour: white
Dimensions device (LxWxH): 610mm|47mm|59mm


NX0012RFI5A5

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL
External RFI-filters (IP54) for EN61800-3, C1, EN55011 class B

Filter for models NXL0003..NXL0012



NX0031RFI5A5

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL
External RFI-filters (IP54) for EN61800-3, C1, EN55011 class B

Filter for models NXL0016..NXL0031



NX0061RFI5A5

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL
External RFI-filters (IP54) for EN61800-3, C1, EN55011 class B

Filter for models NXL0038..NXL0061



NXIP

Honeywell VSD2H Variable Speed Drivers for HVAC applications, 1,1..160kW, IP21/IP54,
Accessories

Trend Variable Speed Drive ethernet Network Interface



NXIP54FR4

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL
Housing kits for upgrade from IP21 to IP54

Kit for models NXL0003..NXL0012



NXIP54FR5

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL
Housing kits for upgrade from IP21 to IP54

Kit for models NXL0016..NXL0031



NXIP54FR6

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL
Housing kits for upgrade from IP21 to IP54

Kit for models NXL0038..NXL0061



NXL00015

Honeywell Microdrives IP20, NXL000

Speed and/or torque controller for induction motors. EMC and LVD compliant with external filters.
The inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating, ventilation and air conditioning systems, normally Low Overload ratings are used. Industrial or process installations normally require High Overload ratings.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
RFI-filter: optional
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H) with external filters
Emissions: EN61800-3 (H) with external filters
Safety: EN 50178, CE, UL, C-UL, FI, GOST R
Protection class: IP20
Series: NXL

Three phase 380 to 500 Vac to three phase
Brake chopper: optional
High overload (for Machines): 0.37kW
High overload Icont: 1.3A
Power: 0.55kW
Low overload Icont: 1.9A
1 phase input: no
3 phases input: yes
Voltage: 400V


NXL0001V35C1N0

Honeywell Inverters 0,37..2,2kW, IP20, NXL Compact

Speed and/or torque controller for induction motors. EMC and LVD compliant with external filters.
The Honeywell inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating, ventilation and air conditioning systems, normally Low Overload ratings are used. Industrial or process installations normally require High Overload ratings.
Features: 1 all-round software package included
start-up wizard
flexible I/O configuration; 1 free slot
inputs/outputs: 2 analog inputs, 3 digital inputs, 1 relay, 1 analog output
Series: NXL Compact
RFI-filter: optional
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: Modbus RTU as standard; optional: LonWorks, Profibus DP, BACnet, Ethernet (Mobus/TCP), N2, DeviceNet, CANopen
Immunity: fulfills all EMC immunity requirements
Emissions: EN61800-3 (category C2) with optional filters
Safety: EN61800-5, CE, UL, cUL
Protection class: IP20

380..500V, 3 phases
Voltage: 400V
Power: 0.55kW
Low overload Icont: 1.9A
High overload (for Machines): 0.37kW
High overload Icont: 1.3A
Brake chopper: no
1 phase input: no
3 phases input: yes


NXL00025

Honeywell Microdrives IP20, NXL000

Speed and/or torque controller for induction motors. EMC and LVD compliant with external filters.
The inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating, ventilation and air conditioning systems, normally Low Overload ratings are used. Industrial or process installations normally require High Overload ratings.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
RFI-filter: optional
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H) with external filters
Emissions: EN61800-3 (H) with external filters
Safety: EN 50178, CE, UL, C-UL, FI, GOST R
Protection class: IP20
Series: NXL

Three phase 380 to 500 Vac to three phase
Brake chopper: optional
High overload (for Machines): 0.55kW
High overload Icont: 1.9A
Power: 0.75kW
Low overload Icont: 2.4A
1 phase input: no
3 phases input: yes
Voltage: 400V


NXL0002C1

Honeywell Microdrives IP20, NXL000

Speed and/or torque controller for induction motors. EMC and LVD compliant with external filters.
The inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating, ventilation and air conditioning systems, normally Low Overload ratings are used. Industrial or process installations normally require High Overload ratings.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
RFI-filter: optional
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H) with external filters
Emissions: EN61800-3 (H) with external filters
Safety: EN 50178, CE, UL, C-UL, FI, GOST R
Protection class: IP20
Series: NXL

Single phase 208 to 240 Vac to three phase
Brake chopper: optional
High overload (for Machines): 0.25kW
High overload Icont: 1.7A
Power: 0.37kW
Low overload Icont: 2.4A
1 phase input: yes
3 phases input: no
Voltage: 230V


NXL0002V32C1N0

Honeywell Inverters 0,37..2,2kW, IP20, NXL Compact

Speed and/or torque controller for induction motors. EMC and LVD compliant with external filters.
The Honeywell inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating, ventilation and air conditioning systems, normally Low Overload ratings are used. Industrial or process installations normally require High Overload ratings.
Features: 1 all-round software package included
start-up wizard
flexible I/O configuration; 1 free slot
inputs/outputs: 2 analog inputs, 3 digital inputs, 1 relay, 1 analog output
Series: NXL Compact
RFI-filter: optional
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: Modbus RTU as standard; optional: LonWorks, Profibus DP, BACnet, Ethernet (Mobus/TCP), N2, DeviceNet, CANopen
Immunity: fulfills all EMC immunity requirements
Emissions: EN61800-3 (category C2) with optional filters
Safety: EN61800-5, CE, UL, cUL
Protection class: IP20

208..240V, 1/3 phases
Voltage: 230V
Power: 0.37kW
Low overload Icont: 2.4A
High overload (for Machines): 0.25kW
High overload Icont: 1.7A
Brake chopper: no
1 phase input: yes
3 phases input: no


NXL0002V35C1N0

Honeywell Inverters 0,37..2,2kW, IP20, NXL Compact

Speed and/or torque controller for induction motors. EMC and LVD compliant with external filters.
The Honeywell inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating, ventilation and air conditioning systems, normally Low Overload ratings are used. Industrial or process installations normally require High Overload ratings.
Features: 1 all-round software package included
start-up wizard
flexible I/O configuration; 1 free slot
inputs/outputs: 2 analog inputs, 3 digital inputs, 1 relay, 1 analog output
Series: NXL Compact
RFI-filter: optional
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: Modbus RTU as standard; optional: LonWorks, Profibus DP, BACnet, Ethernet (Mobus/TCP), N2, DeviceNet, CANopen
Immunity: fulfills all EMC immunity requirements
Emissions: EN61800-3 (category C2) with optional filters
Safety: EN61800-5, CE, UL, cUL
Protection class: IP20

380..500V, 3 phases
Voltage: 400V
Power: 0.75kW
Low overload Icont: 2.4A
High overload (for Machines): 0.55kW
High overload Icont: 1.9A
Brake chopper: no
1 phase input: no
3 phases input: yes


NXL0003C1

Honeywell Microdrives IP20, NXL000

Speed and/or torque controller for induction motors. EMC and LVD compliant with external filters.
The inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating, ventilation and air conditioning systems, normally Low Overload ratings are used. Industrial or process installations normally require High Overload ratings.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
RFI-filter: optional
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H) with external filters
Emissions: EN61800-3 (H) with external filters
Safety: EN 50178, CE, UL, C-UL, FI, GOST R
Protection class: IP20
Series: NXL

Single phase 208 to 240 Vac to three phase
Brake chopper: no
High overload (for Machines): 0.55kW
High overload Icont: 2.8A
Power: 0.75kW
Low overload Icont: 3.7A
1 phase input: yes
3 phases input: no
Voltage: 230V


NXL0003V32C1N1

Honeywell Inverters 0,37..2,2kW, IP20, NXL Compact

Speed and/or torque controller for induction motors. EMC and LVD compliant with external filters.
The Honeywell inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating, ventilation and air conditioning systems, normally Low Overload ratings are used. Industrial or process installations normally require High Overload ratings.
Features: 1 all-round software package included
start-up wizard
flexible I/O configuration; 1 free slot
inputs/outputs: 2 analog inputs, 3 digital inputs, 1 relay, 1 analog output
Series: NXL Compact
RFI-filter: optional
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: Modbus RTU as standard; optional: LonWorks, Profibus DP, BACnet, Ethernet (Mobus/TCP), N2, DeviceNet, CANopen
Immunity: fulfills all EMC immunity requirements
Emissions: EN61800-3 (category C2) with optional filters
Safety: EN61800-5, CE, UL, cUL
Protection class: IP20

208..240V, 1/3 phases
Voltage: 230V
Power: 0.75kW
Low overload Icont: 3.7A
High overload (for Machines): 0.55kW
High overload Icont: 2.8A
Brake chopper: integrated
1 phase input: yes
3 phases input: yes


NXL0003V35C1N1

Honeywell Inverters 0,37..2,2kW, IP20, NXL Compact

Speed and/or torque controller for induction motors. EMC and LVD compliant with external filters.
The Honeywell inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating, ventilation and air conditioning systems, normally Low Overload ratings are used. Industrial or process installations normally require High Overload ratings.
Features: 1 all-round software package included
start-up wizard
flexible I/O configuration; 1 free slot
inputs/outputs: 2 analog inputs, 3 digital inputs, 1 relay, 1 analog output
Series: NXL Compact
RFI-filter: optional
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: Modbus RTU as standard; optional: LonWorks, Profibus DP, BACnet, Ethernet (Mobus/TCP), N2, DeviceNet, CANopen
Immunity: fulfills all EMC immunity requirements
Emissions: EN61800-3 (category C2) with optional filters
Safety: EN61800-5, CE, UL, cUL
Protection class: IP20

380..500V, 3 phases
Voltage: 400V
Power: 1.1kW
Low overload Icont: 3.3A
High overload (for Machines): 0.75kW
High overload Icont: 2.4A
Brake chopper: integrated
1 phase input: no
3 phases input: yes


NXL0003V35C2H1

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The Honeywell inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
Series: NXL
RFI-filter: integrated
Brake chopper: integrated
Input phase: 3
Rated voltage: 380..500V (400V)
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R

IP21
Protection class: IP21
High overload (for Machines): 0.75kW
High overload Icont: 2.2A
Power: 1.1kW
Low overload Icont: 3.3A


NXL0003V35C5H1

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The Honeywell inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
Series: NXL
RFI-filter: integrated
Brake chopper: integrated
Input phase: 3
Rated voltage: 380..500V (400V)
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R

IP54
Protection class: IP54
High overload (for Machines): 0.75kW
High overload Icont: 2.2A
Power: 1.1kW
Low overload Icont: 3.3A


NXL0004C1

Honeywell Microdrives IP20, NXL000

Speed and/or torque controller for induction motors. EMC and LVD compliant with external filters.
The inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating, ventilation and air conditioning systems, normally Low Overload ratings are used. Industrial or process installations normally require High Overload ratings.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
RFI-filter: optional
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H) with external filters
Emissions: EN61800-3 (H) with external filters
Safety: EN 50178, CE, UL, C-UL, FI, GOST R
Protection class: IP20
Series: NXL

Single phase 208 to 240 Vac to three phase
Brake chopper: no
High overload (for Machines): 0.75kW
High overload Icont: 3.7A
Power: 1.1kW
Low overload Icont: 4.8A
1 phase input: yes
3 phases input: no
Voltage: 230V


NXL0004V32C1N1

Honeywell Inverters 0,37..2,2kW, IP20, NXL Compact

Speed and/or torque controller for induction motors. EMC and LVD compliant with external filters.
The Honeywell inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating, ventilation and air conditioning systems, normally Low Overload ratings are used. Industrial or process installations normally require High Overload ratings.
Features: 1 all-round software package included
start-up wizard
flexible I/O configuration; 1 free slot
inputs/outputs: 2 analog inputs, 3 digital inputs, 1 relay, 1 analog output
Series: NXL Compact
RFI-filter: optional
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: Modbus RTU as standard; optional: LonWorks, Profibus DP, BACnet, Ethernet (Mobus/TCP), N2, DeviceNet, CANopen
Immunity: fulfills all EMC immunity requirements
Emissions: EN61800-3 (category C2) with optional filters
Safety: EN61800-5, CE, UL, cUL
Protection class: IP20

208..240V, 1/3 phases
Voltage: 230V
Power: 1.1kW
Low overload Icont: 4.8A
High overload (for Machines): 0.75kW
High overload Icont: 3.7A
Brake chopper: integrated
1 phase input: yes
3 phases input: yes


NXL0004V35C1N1

Honeywell Inverters 0,37..2,2kW, IP20, NXL Compact

Speed and/or torque controller for induction motors. EMC and LVD compliant with external filters.
The Honeywell inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating, ventilation and air conditioning systems, normally Low Overload ratings are used. Industrial or process installations normally require High Overload ratings.
Features: 1 all-round software package included
start-up wizard
flexible I/O configuration; 1 free slot
inputs/outputs: 2 analog inputs, 3 digital inputs, 1 relay, 1 analog output
Series: NXL Compact
RFI-filter: optional
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: Modbus RTU as standard; optional: LonWorks, Profibus DP, BACnet, Ethernet (Mobus/TCP), N2, DeviceNet, CANopen
Immunity: fulfills all EMC immunity requirements
Emissions: EN61800-3 (category C2) with optional filters
Safety: EN61800-5, CE, UL, cUL
Protection class: IP20

380..500V, 3 phases
Voltage: 400V
Power: 1.5kW
Low overload Icont: 4.3A
High overload (for Machines): 1.1kW
High overload Icont: 3.3A
Brake chopper: integrated
1 phase input: no
3 phases input: yes


NXL0004V35C2H1

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The Honeywell inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
Series: NXL
RFI-filter: integrated
Brake chopper: integrated
Input phase: 3
Rated voltage: 380..500V (400V)
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R

IP21
Protection class: IP21
High overload (for Machines): 1.1kW
High overload Icont: 3.3A
Power: 1.5kW
Low overload Icont: 4.3A


NXL0004V35C5H1

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The Honeywell inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
Series: NXL
RFI-filter: integrated
Brake chopper: integrated
Input phase: 3
Rated voltage: 380..500V (400V)
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R

IP54
Protection class: IP54
High overload (for Machines): 1.1kW
High overload Icont: 3.3A
Power: 1.5kW
Low overload Icont: 4.3A


NXL0005V35C1N1

Honeywell Inverters 0,37..2,2kW, IP20, NXL Compact

Speed and/or torque controller for induction motors. EMC and LVD compliant with external filters.
The Honeywell inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating, ventilation and air conditioning systems, normally Low Overload ratings are used. Industrial or process installations normally require High Overload ratings.
Features: 1 all-round software package included
start-up wizard
flexible I/O configuration; 1 free slot
inputs/outputs: 2 analog inputs, 3 digital inputs, 1 relay, 1 analog output
Series: NXL Compact
RFI-filter: optional
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: Modbus RTU as standard; optional: LonWorks, Profibus DP, BACnet, Ethernet (Mobus/TCP), N2, DeviceNet, CANopen
Immunity: fulfills all EMC immunity requirements
Emissions: EN61800-3 (category C2) with optional filters
Safety: EN61800-5, CE, UL, cUL
Protection class: IP20

380..500V, 3 phases
Voltage: 400V
Power: 2.2kW
Low overload Icont: 5.4A
High overload (for Machines): 1.5kW
High overload Icont: 4.3A
Brake chopper: integrated
1 phase input: no
3 phases input: yes


NXL0005V35C2H1

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The Honeywell inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
Series: NXL
RFI-filter: integrated
Brake chopper: integrated
Input phase: 3
Rated voltage: 380..500V (400V)
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R

IP21
Protection class: IP21
High overload (for Machines): 1.5kW
High overload Icont: 4.3A
Power: 2.2kW
Low overload Icont: 5.6A


NXL0005V35C5H1

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The Honeywell inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
Series: NXL
RFI-filter: integrated
Brake chopper: integrated
Input phase: 3
Rated voltage: 380..500V (400V)
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R

IP54
Protection class: IP54
High overload (for Machines): 1.5kW
High overload Icont: 4.3A
Power: 2.2kW
Low overload Icont: 5.6A


NXL0006C1

Honeywell Microdrives IP20, NXL000

Speed and/or torque controller for induction motors. EMC and LVD compliant with external filters.
The inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating, ventilation and air conditioning systems, normally Low Overload ratings are used. Industrial or process installations normally require High Overload ratings.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
RFI-filter: optional
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H) with external filters
Emissions: EN61800-3 (H) with external filters
Safety: EN 50178, CE, UL, C-UL, FI, GOST R
Protection class: IP20
Series: NXL

Single phase 208 to 240 Vac to three phase
Brake chopper: no
High overload (for Machines): 1.1kW
High overload Icont: 4.8A
Power: 1.5kW
Low overload Icont: 6.6A
1 phase input: yes
3 phases input: no
Voltage: 230V


NXL0006V32C1N1

Honeywell Inverters 0,37..2,2kW, IP20, NXL Compact

Speed and/or torque controller for induction motors. EMC and LVD compliant with external filters.
The Honeywell inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating, ventilation and air conditioning systems, normally Low Overload ratings are used. Industrial or process installations normally require High Overload ratings.
Features: 1 all-round software package included
start-up wizard
flexible I/O configuration; 1 free slot
inputs/outputs: 2 analog inputs, 3 digital inputs, 1 relay, 1 analog output
Series: NXL Compact
RFI-filter: optional
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: Modbus RTU as standard; optional: LonWorks, Profibus DP, BACnet, Ethernet (Mobus/TCP), N2, DeviceNet, CANopen
Immunity: fulfills all EMC immunity requirements
Emissions: EN61800-3 (category C2) with optional filters
Safety: EN61800-5, CE, UL, cUL
Protection class: IP20

208..240V, 1/3 phases
Voltage: 230V
Power: 1.5kW
Low overload Icont: 6.6A
High overload (for Machines): 1.1kW
High overload Icont: 4.8A
Brake chopper: integrated
1 phase input: yes
3 phases input: yes


NXL0007V35C2H1

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The Honeywell inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
Series: NXL
RFI-filter: integrated
Brake chopper: integrated
Input phase: 3
Rated voltage: 380..500V (400V)
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R

IP21
Protection class: IP21
High overload (for Machines): 2.2kW
High overload Icont: 5.6A
Power: 3kW
Low overload Icont: 7.6A


NXL0007V35C5H1

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The Honeywell inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
Series: NXL
RFI-filter: integrated
Brake chopper: integrated
Input phase: 3
Rated voltage: 380..500V (400V)
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R

IP54
Protection class: IP54
High overload (for Machines): 2.2kW
High overload Icont: 5.6A
Power: 3kW
Low overload Icont: 7.6A


NXL0009V35C2H1

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The Honeywell inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
Series: NXL
RFI-filter: integrated
Brake chopper: integrated
Input phase: 3
Rated voltage: 380..500V (400V)
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R

IP21
Protection class: IP21
High overload (for Machines): 3kW
High overload Icont: 7.6A
Power: 4kW
Low overload Icont: 9A


NXL0009V35C5H1

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The Honeywell inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
Series: NXL
RFI-filter: integrated
Brake chopper: integrated
Input phase: 3
Rated voltage: 380..500V (400V)
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R

IP54
Protection class: IP54
High overload (for Machines): 3kW
High overload Icont: 7.6A
Power: 4kW
Low overload Icont: 9A


NXL0012V35C2H1

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The Honeywell inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
Series: NXL
RFI-filter: integrated
Brake chopper: integrated
Input phase: 3
Rated voltage: 380..500V (400V)
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R

IP21
Protection class: IP21
High overload (for Machines): 4kW
High overload Icont: 9A
Power: 5.5kW
Low overload Icont: 12A


NXL0012V35C5H1

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The Honeywell inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
Series: NXL
RFI-filter: integrated
Brake chopper: integrated
Input phase: 3
Rated voltage: 380..500V (400V)
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R

IP54
Protection class: IP54
High overload (for Machines): 4kW
High overload Icont: 9A
Power: 5.5kW
Low overload Icont: 12A


NXL0016V35C2H1

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The Honeywell inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
Series: NXL
RFI-filter: integrated
Brake chopper: integrated
Input phase: 3
Rated voltage: 380..500V (400V)
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R

IP21
Protection class: IP21
High overload (for Machines): 5.5kW
High overload Icont: 12A
Power: 7.5kW
Low overload Icont: 16A


NXL0016V35C5H1

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The Honeywell inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
Series: NXL
RFI-filter: integrated
Brake chopper: integrated
Input phase: 3
Rated voltage: 380..500V (400V)
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R

IP54
Protection class: IP54
High overload (for Machines): 5.5kW
High overload Icont: 12A
Power: 7.5kW
Low overload Icont: 16A


NXL0023V35C2H1

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The Honeywell inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
Series: NXL
RFI-filter: integrated
Brake chopper: integrated
Input phase: 3
Rated voltage: 380..500V (400V)
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R

IP21
Protection class: IP21
High overload (for Machines): 7.5kW
High overload Icont: 16A
Power: 11kW
Low overload Icont: 23A


NXL0023V35C5H1

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The Honeywell inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
Series: NXL
RFI-filter: integrated
Brake chopper: integrated
Input phase: 3
Rated voltage: 380..500V (400V)
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R

IP54
Protection class: IP54
High overload (for Machines): 7.5kW
High overload Icont: 16A
Power: 11kW
Low overload Icont: 23A


NXL0031V35C2H1

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The Honeywell inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
Series: NXL
RFI-filter: integrated
Brake chopper: integrated
Input phase: 3
Rated voltage: 380..500V (400V)
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R

IP21
Protection class: IP21
High overload (for Machines): 11kW
High overload Icont: 23A
Power: 15kW
Low overload Icont: 31A


NXL0031V35C5H1

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The Honeywell inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
Series: NXL
RFI-filter: integrated
Brake chopper: integrated
Input phase: 3
Rated voltage: 380..500V (400V)
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R

IP54
Protection class: IP54
High overload (for Machines): 11kW
High overload Icont: 23A
Power: 15kW
Low overload Icont: 31A


NXL0038V35C2H1

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The Honeywell inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
Series: NXL
RFI-filter: integrated
Brake chopper: integrated
Input phase: 3
Rated voltage: 380..500V (400V)
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R

IP21
Protection class: IP21
High overload (for Machines): 15kW
High overload Icont: 31A
Power: 18.5kW
Low overload Icont: 38A


NXL0038V35C5H1

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The Honeywell inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
Series: NXL
RFI-filter: integrated
Brake chopper: integrated
Input phase: 3
Rated voltage: 380..500V (400V)
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R

IP54
Protection class: IP54
High overload (for Machines): 15kW
High overload Icont: 31A
Power: 18.5kW
Low overload Icont: 38A


NXL0046V35C2H1

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The Honeywell inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
Series: NXL
RFI-filter: integrated
Brake chopper: integrated
Input phase: 3
Rated voltage: 380..500V (400V)
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R

IP21
Protection class: IP21
High overload (for Machines): 18.5kW
High overload Icont: 38A
Power: 22kW
Low overload Icont: 46A


NXL0046V35C5H1

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The Honeywell inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
Series: NXL
RFI-filter: integrated
Brake chopper: integrated
Input phase: 3
Rated voltage: 380..500V (400V)
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R

IP54
Protection class: IP54
High overload (for Machines): 18.5kW
High overload Icont: 38A
Power: 22kW
Low overload Icont: 46A


NXL0061V35C2H1

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The Honeywell inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
Series: NXL
RFI-filter: integrated
Brake chopper: integrated
Input phase: 3
Rated voltage: 380..500V (400V)
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R

IP21
Protection class: IP21
High overload (for Machines): 22kW
High overload Icont: 46A
Power: 30kW
Low overload Icont: 61A


NXL0061V35C5H1

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The Honeywell inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
Series: NXL
RFI-filter: integrated
Brake chopper: integrated
Input phase: 3
Rated voltage: 380..500V (400V)
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R

IP54
Protection class: IP54
High overload (for Machines): 22kW
High overload Icont: 46A
Power: 30kW
Low overload Icont: 61A


NXLAA03C2

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXLAA

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
RFI-filter: integrated
Brake chopper: integrated
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R
Series: NXL
1 phase input: no
3 phases input: yes
Voltage: 400V

Power ratings at 380 V power supply
Protection class: IP21
High overload (for Machines): 0.75kW
High overload Icont: 2.2A
Power: 1.1kW
Low overload Icont: 3.3A


NXLAA03C5

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXLAA

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
RFI-filter: integrated
Brake chopper: integrated
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R
Series: NXL
1 phase input: no
3 phases input: yes
Voltage: 400V

Power ratings at 380 V power supply
Protection class: IP54
High overload (for Machines): 0.75kW
High overload Icont: 2.2A
Power: 1.1kW
Low overload Icont: 3.3A


NXLAA04C2

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXLAA

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
RFI-filter: integrated
Brake chopper: integrated
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R
Series: NXL
1 phase input: no
3 phases input: yes
Voltage: 400V

Power ratings at 380 V power supply
Protection class: IP21
High overload (for Machines): 1.1kW
High overload Icont: 3.3A
Power: 1.5kW
Low overload Icont: 4.3A


NXLAA04C5

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXLAA

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
RFI-filter: integrated
Brake chopper: integrated
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R
Series: NXL
1 phase input: no
3 phases input: yes
Voltage: 400V

Power ratings at 380 V power supply
Protection class: IP54
High overload (for Machines): 1.1kW
High overload Icont: 3.3A
Power: 1.5kW
Low overload Icont: 4.3A


NXLAA05C2

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXLAA

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
RFI-filter: integrated
Brake chopper: integrated
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R
Series: NXL
1 phase input: no
3 phases input: yes
Voltage: 400V

Power ratings at 380 V power supply
Protection class: IP21
High overload (for Machines): 1.5kW
High overload Icont: 4.3A
Power: 2.2kW
Low overload Icont: 5.6A


NXLAA05C5

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXLAA

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
RFI-filter: integrated
Brake chopper: integrated
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R
Series: NXL
1 phase input: no
3 phases input: yes
Voltage: 400V

Power ratings at 380 V power supply
Protection class: IP54
High overload (for Machines): 1.5kW
High overload Icont: 4.3A
Power: 2.2kW
Low overload Icont: 5.6A


NXLAA07C2

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXLAA

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
RFI-filter: integrated
Brake chopper: integrated
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R
Series: NXL
1 phase input: no
3 phases input: yes
Voltage: 400V

Power ratings at 380 V power supply
Protection class: IP21
High overload (for Machines): 2.2kW
High overload Icont: 5.6A
Power: 3kW
Low overload Icont: 7.6A


NXLAA07C5

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXLAA

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
RFI-filter: integrated
Brake chopper: integrated
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R
Series: NXL
1 phase input: no
3 phases input: yes
Voltage: 400V

Power ratings at 380 V power supply
Protection class: IP54
High overload (for Machines): 2.2kW
High overload Icont: 5.6A
Power: 3kW
Low overload Icont: 7.6A


NXLAA09C2

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXLAA

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
RFI-filter: integrated
Brake chopper: integrated
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R
Series: NXL
1 phase input: no
3 phases input: yes
Voltage: 400V

Power ratings at 380 V power supply
Protection class: IP21
High overload (for Machines): 3kW
High overload Icont: 7.6A
Power: 4kW
Low overload Icont: 9A


NXLAA09C5

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXLAA

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
RFI-filter: integrated
Brake chopper: integrated
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R
Series: NXL
1 phase input: no
3 phases input: yes
Voltage: 400V

Power ratings at 380 V power supply
Protection class: IP54
High overload (for Machines): 3kW
High overload Icont: 7.6A
Power: 4kW
Low overload Icont: 9A


NXLAA12C2

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXLAA

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
RFI-filter: integrated
Brake chopper: integrated
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R
Series: NXL
1 phase input: no
3 phases input: yes
Voltage: 400V

Power ratings at 380 V power supply
Protection class: IP21
High overload (for Machines): 4kW
High overload Icont: 9A
Power: 5.5kW
Low overload Icont: 12A


NXLAA12C5

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXLAA

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
RFI-filter: integrated
Brake chopper: integrated
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R
Series: NXL
1 phase input: no
3 phases input: yes
Voltage: 400V

Power ratings at 380 V power supply
Protection class: IP54
High overload (for Machines): 4kW
High overload Icont: 9A
Power: 5.5kW
Low overload Icont: 12A


NXLAA16C2

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXLAA

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
RFI-filter: integrated
Brake chopper: integrated
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R
Series: NXL
1 phase input: no
3 phases input: yes
Voltage: 400V

Power ratings at 380 V power supply
Protection class: IP21
High overload (for Machines): 5.5kW
High overload Icont: 12A
Power: 7.5kW
Low overload Icont: 16A


NXLAA16C5

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXLAA

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
RFI-filter: integrated
Brake chopper: integrated
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R
Series: NXL
1 phase input: no
3 phases input: yes
Voltage: 400V

Power ratings at 380 V power supply
Protection class: IP54
High overload (for Machines): 5.5kW
High overload Icont: 12A
Power: 7.5kW
Low overload Icont: 16A


NXLAA23C2

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXLAA

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
RFI-filter: integrated
Brake chopper: integrated
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R
Series: NXL
1 phase input: no
3 phases input: yes
Voltage: 400V

Power ratings at 380 V power supply
Protection class: IP21
High overload (for Machines): 7.5kW
High overload Icont: 16A
Power: 11kW
Low overload Icont: 23A


NXLAA23C5

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXLAA

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
RFI-filter: integrated
Brake chopper: integrated
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R
Series: NXL
1 phase input: no
3 phases input: yes
Voltage: 400V

Power ratings at 380 V power supply
Protection class: IP54
High overload (for Machines): 7.5kW
High overload Icont: 16A
Power: 11kW
Low overload Icont: 23A


NXLAA31C2

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXLAA

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
RFI-filter: integrated
Brake chopper: integrated
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R
Series: NXL
1 phase input: no
3 phases input: yes
Voltage: 400V

Power ratings at 380 V power supply
Protection class: IP21
High overload (for Machines): 11kW
High overload Icont: 23A
Power: 15kW
Low overload Icont: 31A


NXLAA31C5

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXLAA

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
RFI-filter: integrated
Brake chopper: integrated
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R
Series: NXL
1 phase input: no
3 phases input: yes
Voltage: 400V

Power ratings at 380 V power supply
Protection class: IP54
High overload (for Machines): 11kW
High overload Icont: 23A
Power: 15kW
Low overload Icont: 31A


NXLAA38C2

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXLAA

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
RFI-filter: integrated
Brake chopper: integrated
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R
Series: NXL
1 phase input: no
3 phases input: yes
Voltage: 400V

Power ratings at 380 V power supply
Protection class: IP21
High overload (for Machines): 15kW
High overload Icont: 31A
Power: 18.5kW
Low overload Icont: 38A


NXLAA38C5

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXLAA

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
RFI-filter: integrated
Brake chopper: integrated
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R
Series: NXL
1 phase input: no
3 phases input: yes
Voltage: 400V

Power ratings at 380 V power supply
Protection class: IP54
High overload (for Machines): 15kW
High overload Icont: 31A
Power: 18.5kW
Low overload Icont: 38A


NXLAA45C2

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXLAA

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
RFI-filter: integrated
Brake chopper: integrated
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R
Series: NXL
1 phase input: no
3 phases input: yes
Voltage: 400V

Power ratings at 380 V power supply
Protection class: IP21
High overload (for Machines): 18.5kW
High overload Icont: 38A
Power: 22kW
Low overload Icont: 46A


NXLAA45C5

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXLAA

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
RFI-filter: integrated
Brake chopper: integrated
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R
Series: NXL
1 phase input: no
3 phases input: yes
Voltage: 400V

Power ratings at 380 V power supply
Protection class: IP54
High overload (for Machines): 18.5kW
High overload Icont: 38A
Power: 22kW
Low overload Icont: 46A


NXLAA61C2

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXLAA

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
RFI-filter: integrated
Brake chopper: integrated
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R
Series: NXL
1 phase input: no
3 phases input: yes
Voltage: 400V

Power ratings at 380 V power supply
Protection class: IP21
High overload (for Machines): 22kW
High overload Icont: 46A
Power: 30kW
Low overload Icont: 61A


NXLAA61C5

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXLAA

Speed controller for induction motors, with built-in RFI filters. EMC and LVD compliant.
The inverters are suitable for High/Low Overload (constant/variable torque) applications. To control pumps and fans for heating , ventilation and air conditioning systems, normally Low Overload inverters are used. Industrial or process installations normally require High Overload inverters.
Features: AC choke included for protection against overvoltage
flexible I/O configuration; 1 free slot
compact housing
power module with metal chassis for compliance with RFI regulations and safety
detachable HMI-panel for parameter settings, alarms, start/stop functions, using a code-number system
1 all-round software package included, other packages can be installed on site
CE-Mark declaration enclosed in manual
RFI-filter: integrated
Brake chopper: integrated
Output frequency: 0...320Hz
Frequency resolution: 0.01Hz
Serial communication: optional: Interbus-S, Modbus, Echelon, Profibus
Immunity: EN61800-3 (H)
Emissions: EN61800-3 (H)
Safety: EN 50178, CE, UL, C-UL, FI, GOST R
Series: NXL
1 phase input: no
3 phases input: yes
Voltage: 400V

Power ratings at 380 V power supply
Protection class: IP54
High overload (for Machines): 22kW
High overload Icont: 46A
Power: 30kW
Low overload Icont: 61A


NXLDRA

Honeywell Microdrives IP20, NXL000
Accessories

Door mounting kit for control keypad



NXLOPTAA

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL
Input / Output cards

3 DI, 1 relay (NO/NC), 1 DO



NXLOPTAI

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL
Input / Output cards

3 DI, 1 relay (NO), thermistor input



NXLRFIV12

Honeywell Inverters 0,37..2,2kW, IP20, NXL Compact
NXL Compact RFI filters (EN61800-3 category C2)

RFI filter (1 phase input)for 208..240V models; H-level



NXLRFIV35

Honeywell Inverters 0,37..2,2kW, IP20, NXL Compact
NXL Compact RFI filters (EN61800-3 category C2)

RFI filter for 380..500V models; H-level



NXNI

Honeywell VSD2H Variable Speed Drivers for HVAC applications, 1,1..160kW, IP21/IP54,
Accessories

Trend Variable Speed Drive Network Interface



NXOPTAA

Honeywell Microdrives IP20, NXL000
Accessories

I/O expander card with 3x Digital Input, 1x Digital Output (open collector) and 1x Relay Output (changeover). Fitted as standard to the Ecodrives and available as an optional extra for the Microdrives



NXOPTB1

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL
Input / Output cards

6 DI/DO (programmable, DI or DO)



NXOPTB2

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL
Input / Output cards

1 relay (NO/NC), 1 relay (NO), thermistor input



NXOPTB4

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL
Input / Output cards

1 AI (mA,isolated), 2 AO (mA,isolated), +24V/EXT+24V



NXOPTB5

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL
Input / Output cards

3 relays (NO)



NXOPTB8

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL
Input / Output cards

3 Pt100, +24V/EXT+24V



NXOPTB9

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL
Input / Output cards

1 relay (NO), 5 inputs 41..240 Vac



NXOPTC4

Honeywell Inverters economy 1,1..30kW, IP21/IP54, NXL
Input / Output cards

LonWorks



OVN-VCHR-4

Honeywell Open View Net server, Q7055B, OVN-VCHR

The Q7055B1047 Open View Net Server (OVN) is a Web-enabled operator interface that facilitates secure and easy access to a Honeywell Building Management System (BMS) through the Internet. It provides a connection of a Honeywell XL5000 controller communication bus to an industry standard TCP/IP Ethernet LAN/WAN, delivering exceptional price/performance to meet the requirements of both building owners and service providers.


Product description: Open View Net expansion license for up to 4 controllers


OVN-VCHR-6

Honeywell Open View Net server, Q7055B, OVN-VCHR

The Q7055B1047 Open View Net Server (OVN) is a Web-enabled operator interface that facilitates secure and easy access to a Honeywell Building Management System (BMS) through the Internet. It provides a connection of a Honeywell XL5000 controller communication bus to an industry standard TCP/IP Ethernet LAN/WAN, delivering exceptional price/performance to meet the requirements of both building owners and service providers.


Product description: Open View Net expansion license for up to 6 controllers


ObsoleteProduct

Honeywell How to use this catalogue

Searching for Products can be done as follows:
Use the PRODUCT SEARCH box, and key in a Typenumber or a text. The result list shows clickable Pictures. This opens the needed Product page.
Use the SITEMAP option at the bottom. The complete hierarchy shows up. All texts are clickable.
Use the TYPE option at the bottom. Find the TypeNumber that you need and click on it.
The HIERACHY shows the brand of the Product:
Honeywell
Trend
CentraLine
DOWNLOADS
PRODUCT PICTURES can be downloaded. Use the PHOTO button at the bottom and find your Product/Picture file. Or go to a Product page, and use the download arrow showing up with the Picture.
PRODUCT DOCUMENTATION FILES (PDFs) can be downloaded. Click the red PDF-symbol.
CAD drawings can be downloaded. Click the blue CAD-symbol on a Product page.


P171-100

Honeywell Immersion probe temperature sensor, stainless steel P171 P271

The temperature sensors consist completely of stainless steel.
Protection class: IP65
Cable entry: PG11
Immersion probe with screw-in thread G1/2"
Material: Tube: high-grade steel 1.4571, terminal housing: high-grade steel 1.4301
Temperature range: -50...600C
Mounting place: in well


Temperature element: Pt100
Immersion depth: max. 100mm


P171-150

Honeywell Immersion probe temperature sensor, stainless steel P171 P271

The temperature sensors consist completely of stainless steel.
Protection class: IP65
Cable entry: PG11
Immersion probe with screw-in thread G1/2"
Material: Tube: high-grade steel 1.4571, terminal housing: high-grade steel 1.4301
Temperature range: -50...600C
Mounting place: in well


Temperature element: Pt100
Immersion depth: max. 150mm


P171-200

Honeywell Immersion probe temperature sensor, stainless steel P171 P271

The temperature sensors consist completely of stainless steel.
Protection class: IP65
Cable entry: PG11
Immersion probe with screw-in thread G1/2"
Material: Tube: high-grade steel 1.4571, terminal housing: high-grade steel 1.4301
Temperature range: -50...600C
Mounting place: in well


Temperature element: Pt100
Immersion depth: max. 200mm


P171-250

Honeywell Immersion probe temperature sensor, stainless steel P171 P271

The temperature sensors consist completely of stainless steel.
Protection class: IP65
Cable entry: PG11
Immersion probe with screw-in thread G1/2"
Material: Tube: high-grade steel 1.4571, terminal housing: high-grade steel 1.4301
Temperature range: -50...600C
Mounting place: in well


Temperature element: Pt100
Immersion depth: max. 250mm


P177-100

Honeywell Air duct probe temperature sensor, stainless steel P177 P277

The temperature sensors consist completely of stainless steel.
Protection class: IP65
Cable entry: PG11
Immersion probe with screw-in thread G1/2"
Material: Tube: high-grade steel 1.4571, terminal housing: high-grade steel 1.4301
Temperature range: -50...600C
Mounting place: air duct


Temperature element: Pt100
Immersion depth: max. 100mm


P177-150

Honeywell Air duct probe temperature sensor, stainless steel P177 P277

The temperature sensors consist completely of stainless steel.
Protection class: IP65
Cable entry: PG11
Immersion probe with screw-in thread G1/2"
Material: Tube: high-grade steel 1.4571, terminal housing: high-grade steel 1.4301
Temperature range: -50...600C
Mounting place: air duct


Temperature element: Pt100
Immersion depth: max. 150mm


P177-200

Honeywell Air duct probe temperature sensor, stainless steel P177 P277

The temperature sensors consist completely of stainless steel.
Protection class: IP65
Cable entry: PG11
Immersion probe with screw-in thread G1/2"
Material: Tube: high-grade steel 1.4571, terminal housing: high-grade steel 1.4301
Temperature range: -50...600C
Mounting place: air duct


Temperature element: Pt100
Immersion depth: max. 200mm


P177-250

Honeywell Air duct probe temperature sensor, stainless steel P177 P277

The temperature sensors consist completely of stainless steel.
Protection class: IP65
Cable entry: PG11
Immersion probe with screw-in thread G1/2"
Material: Tube: high-grade steel 1.4571, terminal housing: high-grade steel 1.4301
Temperature range: -50...600C
Mounting place: air duct


Temperature element: Pt100
Immersion depth: max. 250mm


P2

Honeywell Frost protection thermostat for duct mounting (FT)
Accessories

Sealing



P271-100

Honeywell Immersion probe temperature sensor, stainless steel P171 P271

The temperature sensors consist completely of stainless steel.
Protection class: IP65
Cable entry: PG11
Immersion probe with screw-in thread G1/2"
Material: Tube: high-grade steel 1.4571, terminal housing: high-grade steel 1.4301
Temperature range: -50...600C
Mounting place: in well


Temperature element: Pt1000
Immersion depth: max. 100mm


P271-150

Honeywell Immersion probe temperature sensor, stainless steel P171 P271

The temperature sensors consist completely of stainless steel.
Protection class: IP65
Cable entry: PG11
Immersion probe with screw-in thread G1/2"
Material: Tube: high-grade steel 1.4571, terminal housing: high-grade steel 1.4301
Temperature range: -50...600C
Mounting place: in well


Temperature element: Pt1000
Immersion depth: max. 150mm


P271-200

Honeywell Immersion probe temperature sensor, stainless steel P171 P271

The temperature sensors consist completely of stainless steel.
Protection class: IP65
Cable entry: PG11
Immersion probe with screw-in thread G1/2"
Material: Tube: high-grade steel 1.4571, terminal housing: high-grade steel 1.4301
Temperature range: -50...600C
Mounting place: in well


Temperature element: Pt1000
Immersion depth: max. 200mm


P271-250

Honeywell Immersion probe temperature sensor, stainless steel P171 P271

The temperature sensors consist completely of stainless steel.
Protection class: IP65
Cable entry: PG11
Immersion probe with screw-in thread G1/2"
Material: Tube: high-grade steel 1.4571, terminal housing: high-grade steel 1.4301
Temperature range: -50...600C
Mounting place: in well


Temperature element: Pt1000
Immersion depth: max. 250mm


P277-100

Honeywell Air duct probe temperature sensor, stainless steel P177 P277

The temperature sensors consist completely of stainless steel.
Protection class: IP65
Cable entry: PG11
Immersion probe with screw-in thread G1/2"
Material: Tube: high-grade steel 1.4571, terminal housing: high-grade steel 1.4301
Temperature range: -50...600C
Mounting place: air duct


Temperature element: Pt1000
Immersion depth: max. 100mm


P277-150

Honeywell Air duct probe temperature sensor, stainless steel P177 P277

The temperature sensors consist completely of stainless steel.
Protection class: IP65
Cable entry: PG11
Immersion probe with screw-in thread G1/2"
Material: Tube: high-grade steel 1.4571, terminal housing: high-grade steel 1.4301
Temperature range: -50...600C
Mounting place: air duct


Temperature element: Pt1000
Immersion depth: max. 150mm


P277-200

Honeywell Air duct probe temperature sensor, stainless steel P177 P277

The temperature sensors consist completely of stainless steel.
Protection class: IP65
Cable entry: PG11
Immersion probe with screw-in thread G1/2"
Material: Tube: high-grade steel 1.4571, terminal housing: high-grade steel 1.4301
Temperature range: -50...600C
Mounting place: air duct


Temperature element: Pt1000
Immersion depth: max. 200mm


P277-250

Honeywell Air duct probe temperature sensor, stainless steel P177 P277

The temperature sensors consist completely of stainless steel.
Protection class: IP65
Cable entry: PG11
Immersion probe with screw-in thread G1/2"
Material: Tube: high-grade steel 1.4571, terminal housing: high-grade steel 1.4301
Temperature range: -50...600C
Mounting place: air duct


Temperature element: Pt1000
Immersion depth: max. 250mm


PART/EJ104164

Honeywell IQ22x Controllers
Accessories

IQ220/ADL local supervisor adapter (25 way to RJ11)



PART/LA102359K

Honeywell IQ251 Controllers
Accessories

IQ earthing busbar/cables screen earthing strip and screws



PIL4/10

Honeywell Pressure, Current sensor, Liquid

High accuracy gauge pressure sensor for liquids in HVAC applications.
Kind of pressure: gauge
Pressure connection: G1/2 (BSP) male thread.
Electrical connection: M12 two part connector
Protection class: IP67
Housing material: medium is only in contact with the stainless steel housing and the ceramic chip making the sensor suitable for use with all normal cleaning materials.
Sensing method: piezoresistive
Media temp.: -25...125C
Media temp. limit: Steam pigtail, required if used on steam or water above 85 oC (typically drops from 200 oC to ambient from medium to sensor)
Medium: liquid/gaseous
Ambient temperature: ...85C
Output signal: 4..20mA


Pressure range: 0...10bar
Max. pressure: 25bar


PIL4/16

Honeywell Pressure, Current sensor, Liquid

High accuracy gauge pressure sensor for liquids in HVAC applications.
Kind of pressure: gauge
Pressure connection: G1/2 (BSP) male thread.
Electrical connection: M12 two part connector
Protection class: IP67
Housing material: medium is only in contact with the stainless steel housing and the ceramic chip making the sensor suitable for use with all normal cleaning materials.
Sensing method: piezoresistive
Media temp.: -25...125C
Media temp. limit: Steam pigtail, required if used on steam or water above 85 oC (typically drops from 200 oC to ambient from medium to sensor)
Medium: liquid/gaseous
Ambient temperature: ...85C
Output signal: 4..20mA


Pressure range: 0...16bar
Max. pressure: 40bar


PIL4/25

Honeywell Pressure, Current sensor, Liquid

High accuracy gauge pressure sensor for liquids in HVAC applications.
Kind of pressure: gauge
Pressure connection: G1/2 (BSP) male thread.
Electrical connection: M12 two part connector
Protection class: IP67
Housing material: medium is only in contact with the stainless steel housing and the ceramic chip making the sensor suitable for use with all normal cleaning materials.
Sensing method: piezoresistive
Media temp.: -25...125C
Media temp. limit: Steam pigtail, required if used on steam or water above 85 oC (typically drops from 200 oC to ambient from medium to sensor)
Medium: liquid/gaseous
Ambient temperature: ...85C
Output signal: 4..20mA


Pressure range: 0...25bar
Max. pressure: 62bar


PIL4/4

Honeywell Pressure, Current sensor, Liquid

High accuracy gauge pressure sensor for liquids in HVAC applications.
Kind of pressure: gauge
Pressure connection: G1/2 (BSP) male thread.
Electrical connection: M12 two part connector
Protection class: IP67
Housing material: medium is only in contact with the stainless steel housing and the ceramic chip making the sensor suitable for use with all normal cleaning materials.
Sensing method: piezoresistive
Media temp.: -25...125C
Media temp. limit: Steam pigtail, required if used on steam or water above 85 oC (typically drops from 200 oC to ambient from medium to sensor)
Medium: liquid/gaseous
Ambient temperature: ...85C
Output signal: 4..20mA


Pressure range: 0...4bar
Max. pressure: 10bar


PIL4/6

Honeywell Pressure, Current sensor, Liquid

High accuracy gauge pressure sensor for liquids in HVAC applications.
Kind of pressure: gauge
Pressure connection: G1/2 (BSP) male thread.
Electrical connection: M12 two part connector
Protection class: IP67
Housing material: medium is only in contact with the stainless steel housing and the ceramic chip making the sensor suitable for use with all normal cleaning materials.
Sensing method: piezoresistive
Media temp.: -25...125C
Media temp. limit: Steam pigtail, required if used on steam or water above 85 oC (typically drops from 200 oC to ambient from medium to sensor)
Medium: liquid/gaseous
Ambient temperature: ...85C
Output signal: 4..20mA


Pressure range: 0...6bar
Max. pressure: 15bar


PP904A1035

Honeywell Static Pressure Controller, PP904

The PP904A is used to control low air pressure, for instance in a laboratory where the room air pressure has to be maintained above that of the surrounding area. It is a two-pipe controller with field selectable direct or reverse action and adjustable proportional band, and can be used for either static or differential pressure control.
Max. safe air pressure: 7kPa
Outlet pressure: 0...+/-2000Pa
Pressure proportional range: 5...125Pa


PP97A1001

Honeywell Pressure Controller, PP97

One-pipe, pressure-operated device that provides proportional control of pneumatic valves to control steam, air, noncorrosive gas, or noncorrosive liquid pressure. Direct or Reverse setting. A 0.007" restrictor is packed with the unit.
Air connection: 1/8" NPT; Bellow: 1/4" NPT


Outlet pressure: -74...241kPa
Pressure proportional range: 3...24kPa
Max. safe air pressure: 586kPa


PP97A1019

Honeywell Pressure Controller, PP97

One-pipe, pressure-operated device that provides proportional control of pneumatic valves to control steam, air, noncorrosive gas, or noncorrosive liquid pressure. Direct or Reverse setting. A 0.007" restrictor is packed with the unit.
Air connection: 1/8" NPT; Bellow: 1/4" NPT


Outlet pressure: 0...7kPa
Pressure proportional range: 0.4...1.4kPa
Max. safe air pressure: 34kPa


PP97A1027

Honeywell Pressure Controller, PP97

One-pipe, pressure-operated device that provides proportional control of pneumatic valves to control steam, air, noncorrosive gas, or noncorrosive liquid pressure. Direct or Reverse setting. A 0.007" restrictor is packed with the unit.
Air connection: 1/8" NPT; Bellow: 1/4" NPT


Outlet pressure: 0...70kPa
Pressure proportional range: 0.07...10kPa
Max. safe air pressure: 70kPa


PP97A1035

Honeywell Pressure Controller, PP97

One-pipe, pressure-operated device that provides proportional control of pneumatic valves to control steam, air, noncorrosive gas, or noncorrosive liquid pressure. Direct or Reverse setting. A 0.007" restrictor is packed with the unit.
Air connection: 1/8" NPT; Bellow: 1/4" NPT


Outlet pressure: 0...100kPa
Pressure proportional range: 7...10kPa
Max. safe air pressure: 170kPa


PP97A1043

Honeywell Pressure Controller, PP97

One-pipe, pressure-operated device that provides proportional control of pneumatic valves to control steam, air, noncorrosive gas, or noncorrosive liquid pressure. Direct or Reverse setting. A 0.007" restrictor is packed with the unit.
Air connection: 1/8" NPT; Bellow: 1/4" NPT


Outlet pressure: 14...350kPa
Pressure proportional range: 3...30kPa
Max. safe air pressure: 590kPa


PP97A1076

Honeywell Pressure Controller, PP97

One-pipe, pressure-operated device that provides proportional control of pneumatic valves to control steam, air, noncorrosive gas, or noncorrosive liquid pressure. Direct or Reverse setting. A 0.007" restrictor is packed with the unit.
Air connection: 1/8" NPT; Bellow: 1/4" NPT


Outlet pressure: 70...2070kPa
Pressure proportional range: 17...83kPa
Max. safe air pressure: 2400kPa


PSHDB0012

Honeywell Electronic Differential Pressure switch for gas and liquid (Smart DCM), PSHDM PSHDB

Electronic Differential Pressure Switches are microprocessor-controlled pressure measurement devices for differential pressures of 0 ... 20 bar. They are suitable for an extremely wide range of applications, including the precision recording, monitoring, and control of system pressure. They come complete with an angled M12x1 plug and are mounted directly to the pipe via two G1/4" internal thread connections.
Features:
Open-collector
Configurable as min./max/window monitor
Adjustable drop-in/drop-out delay
Hysteresis defined by set-point and reset-point
LCD graphical display (Human-Machine-Interface models, only) can be swiveled for better readability; display can be rotated in 90o steps by software for better readability. HMI can be freely swiveled 310o
Self-monitoring electronics
Media temp.: -20...70C
Protection class: IP65
Ambient temperature: -20...70C

Diffrential Pressure Switch with HMI
Pressure range: 0...1bar
Max. pressure: 3bar


PSHDB0032

Honeywell Electronic Differential Pressure switch for gas and liquid (Smart DCM), PSHDM PSHDB

Electronic Differential Pressure Switches are microprocessor-controlled pressure measurement devices for differential pressures of 0 ... 20 bar. They are suitable for an extremely wide range of applications, including the precision recording, monitoring, and control of system pressure. They come complete with an angled M12x1 plug and are mounted directly to the pipe via two G1/4" internal thread connections.
Features:
Open-collector
Configurable as min./max/window monitor
Adjustable drop-in/drop-out delay
Hysteresis defined by set-point and reset-point
LCD graphical display (Human-Machine-Interface models, only) can be swiveled for better readability; display can be rotated in 90o steps by software for better readability. HMI can be freely swiveled 310o
Self-monitoring electronics
Media temp.: -20...70C
Protection class: IP65
Ambient temperature: -20...70C

Diffrential Pressure Switch with HMI
Pressure range: 0...3bar
Max. pressure: 9bar


PSHDB0062

Honeywell Electronic Differential Pressure switch for gas and liquid (Smart DCM), PSHDM PSHDB

Electronic Differential Pressure Switches are microprocessor-controlled pressure measurement devices for differential pressures of 0 ... 20 bar. They are suitable for an extremely wide range of applications, including the precision recording, monitoring, and control of system pressure. They come complete with an angled M12x1 plug and are mounted directly to the pipe via two G1/4" internal thread connections.
Features:
Open-collector
Configurable as min./max/window monitor
Adjustable drop-in/drop-out delay
Hysteresis defined by set-point and reset-point
LCD graphical display (Human-Machine-Interface models, only) can be swiveled for better readability; display can be rotated in 90o steps by software for better readability. HMI can be freely swiveled 310o
Self-monitoring electronics
Media temp.: -20...70C
Protection class: IP65
Ambient temperature: -20...70C

Diffrential Pressure Switch with HMI
Pressure range: 0...6bar
Max. pressure: 21bar


PSHDB0202

Honeywell Electronic Differential Pressure switch for gas and liquid (Smart DCM), PSHDM PSHDB

Electronic Differential Pressure Switches are microprocessor-controlled pressure measurement devices for differential pressures of 0 ... 20 bar. They are suitable for an extremely wide range of applications, including the precision recording, monitoring, and control of system pressure. They come complete with an angled M12x1 plug and are mounted directly to the pipe via two G1/4" internal thread connections.
Features:
Open-collector
Configurable as min./max/window monitor
Adjustable drop-in/drop-out delay
Hysteresis defined by set-point and reset-point
LCD graphical display (Human-Machine-Interface models, only) can be swiveled for better readability; display can be rotated in 90o steps by software for better readability. HMI can be freely swiveled 310o
Self-monitoring electronics
Media temp.: -20...70C
Protection class: IP65
Ambient temperature: -20...70C

Diffrential Pressure Switch with HMI
Pressure range: 0...20bar
Max. pressure: 60bar


PSHDM1002

Honeywell Electronic Differential Pressure switch for gas and liquid (Smart DCM), PSHDM PSHDB

Electronic Differential Pressure Switches are microprocessor-controlled pressure measurement devices for differential pressures of 0 ... 20 bar. They are suitable for an extremely wide range of applications, including the precision recording, monitoring, and control of system pressure. They come complete with an angled M12x1 plug and are mounted directly to the pipe via two G1/4" internal thread connections.
Features:
Open-collector
Configurable as min./max/window monitor
Adjustable drop-in/drop-out delay
Hysteresis defined by set-point and reset-point
LCD graphical display (Human-Machine-Interface models, only) can be swiveled for better readability; display can be rotated in 90o steps by software for better readability. HMI can be freely swiveled 310o
Self-monitoring electronics
Media temp.: -20...70C
Protection class: IP65
Ambient temperature: -20...70C

Diffrential Pressure Switch with HMI
Pressure range: 0...0.1bar
Max. pressure: 0.9bar


PSHDM3002

Honeywell Electronic Differential Pressure switch for gas and liquid (Smart DCM), PSHDM PSHDB

Electronic Differential Pressure Switches are microprocessor-controlled pressure measurement devices for differential pressures of 0 ... 20 bar. They are suitable for an extremely wide range of applications, including the precision recording, monitoring, and control of system pressure. They come complete with an angled M12x1 plug and are mounted directly to the pipe via two G1/4" internal thread connections.
Features:
Open-collector
Configurable as min./max/window monitor
Adjustable drop-in/drop-out delay
Hysteresis defined by set-point and reset-point
LCD graphical display (Human-Machine-Interface models, only) can be swiveled for better readability; display can be rotated in 90o steps by software for better readability. HMI can be freely swiveled 310o
Self-monitoring electronics
Media temp.: -20...70C
Protection class: IP65
Ambient temperature: -20...70C

Diffrential Pressure Switch with HMI
Pressure range: 0...0.3bar
Max. pressure: 0.9bar


PSR230/15VDC-1.3

Honeywell Trend Open Network Node (TONN)

The Trend Open Network Node (TONN) is a Trend network device that enables the Trend system to interface with 3rd party systems such as BACnet, LONWORKS, Mbus, MODBUS, SNMP, and KNX. It utilises the NiagaraAX Framework for the integration of Heating, Ventilation, Air Conditioning (HVAC) systems and non-HVAC systems (e.g. lighting) in a building. TONN reads the required data from the 3rd party systems, and makes it available to IQ3 controllers. Data from the controllers can be made available to the 3rd party systems to provide a single supervisory option. TONN enables values from the Trend system to be read and written by the 3rd party systems connected to the TONN, and for the Trend system to read values from and write values to the 3rd party systems.
TONN also includes the following features:
Supplied with drivers for BACnet IP, BACnet MSTP, EIB/KNX IP, LONFTT, LON IP, MODBUSRTU Master, MODBUSRTU Slave, MODBUSTCP Master, MODBUSTCP Slave, MBus Serial, MBus IP, oBIX, and SNMP systems.
Additional optional drivers available: Flex over RS232 or RS485, Micros Fidelio hotel room booking system (IP), Global Cache, Horstmann serial, Helvar serial, American Automatrics PHP over RS232 or RS485 and American Automatrics PUP over RS232 or RS485.
Read and write values from 3rd party systems.
Read and write Trend system values from/to 3rd party systems.
DIN rail or surface mounting.
2 Ethernet ports, 1 x RS232 port, and 1 x RS485 port.
Up to 2 optional plug in communications cards for RS232, LON FTT, and RS485.
15 Vdc power supply.

Power Supply
Product description: 100-240 VAC, 50/60 Hz to 15 Vdc DIN rail mounting power supply


PSR230/15VDC/PLUG/EU

Honeywell Trend Open Network Node (TONN)

The Trend Open Network Node (TONN) is a Trend network device that enables the Trend system to interface with 3rd party systems such as BACnet, LONWORKS, Mbus, MODBUS, SNMP, and KNX. It utilises the NiagaraAX Framework for the integration of Heating, Ventilation, Air Conditioning (HVAC) systems and non-HVAC systems (e.g. lighting) in a building. TONN reads the required data from the 3rd party systems, and makes it available to IQ3 controllers. Data from the controllers can be made available to the 3rd party systems to provide a single supervisory option. TONN enables values from the Trend system to be read and written by the 3rd party systems connected to the TONN, and for the Trend system to read values from and write values to the 3rd party systems.
TONN also includes the following features:
Supplied with drivers for BACnet IP, BACnet MSTP, EIB/KNX IP, LONFTT, LON IP, MODBUSRTU Master, MODBUSRTU Slave, MODBUSTCP Master, MODBUSTCP Slave, MBus Serial, MBus IP, oBIX, and SNMP systems.
Additional optional drivers available: Flex over RS232 or RS485, Micros Fidelio hotel room booking system (IP), Global Cache, Horstmann serial, Helvar serial, American Automatrics PHP over RS232 or RS485 and American Automatrics PUP over RS232 or RS485.
Read and write values from 3rd party systems.
Read and write Trend system values from/to 3rd party systems.
DIN rail or surface mounting.
2 Ethernet ports, 1 x RS232 port, and 1 x RS485 port.
Up to 2 optional plug in communications cards for RS232, LON FTT, and RS485.
15 Vdc power supply.

Power Supply
Product description: 100-240 VAC, 50/60 Hz to 15 Vdc wall power supply European type plug


PSR230/15VDC/PLUG/UK

Honeywell Trend Open Network Node (TONN)

The Trend Open Network Node (TONN) is a Trend network device that enables the Trend system to interface with 3rd party systems such as BACnet, LONWORKS, Mbus, MODBUS, SNMP, and KNX. It utilises the NiagaraAX Framework for the integration of Heating, Ventilation, Air Conditioning (HVAC) systems and non-HVAC systems (e.g. lighting) in a building. TONN reads the required data from the 3rd party systems, and makes it available to IQ3 controllers. Data from the controllers can be made available to the 3rd party systems to provide a single supervisory option. TONN enables values from the Trend system to be read and written by the 3rd party systems connected to the TONN, and for the Trend system to read values from and write values to the 3rd party systems.
TONN also includes the following features:
Supplied with drivers for BACnet IP, BACnet MSTP, EIB/KNX IP, LONFTT, LON IP, MODBUSRTU Master, MODBUSRTU Slave, MODBUSTCP Master, MODBUSTCP Slave, MBus Serial, MBus IP, oBIX, and SNMP systems.
Additional optional drivers available: Flex over RS232 or RS485, Micros Fidelio hotel room booking system (IP), Global Cache, Horstmann serial, Helvar serial, American Automatrics PHP over RS232 or RS485 and American Automatrics PUP over RS232 or RS485.
Read and write values from 3rd party systems.
Read and write Trend system values from/to 3rd party systems.
DIN rail or surface mounting.
2 Ethernet ports, 1 x RS232 port, and 1 x RS485 port.
Up to 2 optional plug in communications cards for RS232, LON FTT, and RS485.
15 Vdc power supply.

Power Supply
Product description: 100-240 VAC, 50/60 Hz to 15 Vdc wall power supply with UK type plug


PSR230/24-1.3

Honeywell IQ3 BACnet Integration Controllers
Accessories

24Vdc/30 Watt (1.3A) DIN rail mounted Power Supply for I/O modules



PSR230/24-2.5

Honeywell IQ3 BACnet Integration Controllers
Accessories

24Vdc/60 Watt (2.5A) DIN rail mounted Power Supply for I/O modules



PW20

Honeywell Bus Converter, PW

The TPW Series are RS232/M-Bus converters which act as master interfaces for M-Bus networks with 3 or 20 slaves (TPW3 and TPW20 respectively). They also have a ZVEI port for optical isolation. They are of a compact design (wall or DIN rail mounting) and have a broad supply voltage band.
Features include:
Compact, DIN rail mounted RS232/M-Bus converter
Versions for 3 (TPW3) or 20 (TPW20) slaves
RS232 or ZVEI optical interfaces
Communications speed from 300 to 9600 baud
Short circuit and over-voltage proof
Operating state indicated by LED on front of unit


Model: RS232/M-Bus converter for up to 20 slave units


PW3

Honeywell Bus Converter, PW

The TPW Series are RS232/M-Bus converters which act as master interfaces for M-Bus networks with 3 or 20 slaves (TPW3 and TPW20 respectively). They also have a ZVEI port for optical isolation. They are of a compact design (wall or DIN rail mounting) and have a broad supply voltage band.
Features include:
Compact, DIN rail mounted RS232/M-Bus converter
Versions for 3 (TPW3) or 20 (TPW20) slaves
RS232 or ZVEI optical interfaces
Communications speed from 300 to 9600 baud
Short circuit and over-voltage proof
Operating state indicated by LED on front of unit


Model: RS232/M-Bus converter for up to 3 slave units


PW60

Honeywell Bus Converter, PW

The TPW Series are RS232/M-Bus converters which act as master interfaces for M-Bus networks with 3 or 20 slaves (TPW3 and TPW20 respectively). They also have a ZVEI port for optical isolation. They are of a compact design (wall or DIN rail mounting) and have a broad supply voltage band.
Features include:
Compact, DIN rail mounted RS232/M-Bus converter
Versions for 3 (TPW3) or 20 (TPW20) slaves
RS232 or ZVEI optical interfaces
Communications speed from 300 to 9600 baud
Short circuit and over-voltage proof
Operating state indicated by LED on front of unit


Model: RS232/M-Bus converter for up to 60 slave units


PZ100

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ)

The temperature transmitters consist completely of stainless steel.
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Temperature range: -50...400C
Mounting place: in well


Immersion depth: 100mm


PZ150

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ)

The temperature transmitters consist completely of stainless steel.
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Temperature range: -50...400C
Mounting place: in well


Immersion depth: 150mm


PZ171-100/100

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ171)

The temperature transmitters consist completely of stainless steel.
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: in well


Temperature range: 0...100C
Immersion depth: max. 100mm


PZ171-100/200

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ171)

The temperature transmitters consist completely of stainless steel.
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: in well


Temperature range: 0...200C
Immersion depth: max. 100mm


PZ171-100/300

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ171)

The temperature transmitters consist completely of stainless steel.
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: in well


Temperature range: 0...300C
Immersion depth: max. 100mm


PZ171-100/400

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ171)

The temperature transmitters consist completely of stainless steel.
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: in well


Temperature range: 0...400C
Immersion depth: max. 100mm


PZ171-100/50

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ171)

The temperature transmitters consist completely of stainless steel.
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: in well


Temperature range: 0...50C
Immersion depth: max. 100mm


PZ171-100/51

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ171)

The temperature transmitters consist completely of stainless steel.
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: in well


Temperature range: -50...100C
Immersion depth: max. 100mm


PZ171-100/55

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ171)

The temperature transmitters consist completely of stainless steel.
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: in well


Temperature range: -50...50C
Immersion depth: max. 100mm


PZ171-150/100

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ171)

The temperature transmitters consist completely of stainless steel.
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: in well


Temperature range: 0...100C
Immersion depth: max. 150mm


PZ171-150/200

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ171)

The temperature transmitters consist completely of stainless steel.
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: in well


Temperature range: 0...200C
Immersion depth: max. 150mm


PZ171-150/300

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ171)

The temperature transmitters consist completely of stainless steel.
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: in well


Temperature range: 0...300C
Immersion depth: max. 150mm


PZ171-150/400

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ171)

The temperature transmitters consist completely of stainless steel.
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: in well


Temperature range: 0...400C
Immersion depth: max. 150mm


PZ171-150/50

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ171)

The temperature transmitters consist completely of stainless steel.
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: in well


Temperature range: 0...50C
Immersion depth: max. 150mm


PZ171-150/51

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ171)

The temperature transmitters consist completely of stainless steel.
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: in well


Temperature range: -50...100C
Immersion depth: max. 150mm


PZ171-150/55

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ171)

The temperature transmitters consist completely of stainless steel.
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: in well


Temperature range: -50...50C
Immersion depth: max. 150mm


PZ171-200/100

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ171)

The temperature transmitters consist completely of stainless steel.
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: in well


Temperature range: 0...100C
Immersion depth: max. 200mm


PZ171-200/200

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ171)

The temperature transmitters consist completely of stainless steel.
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: in well


Temperature range: 0...200C
Immersion depth: max. 200mm


PZ171-200/300

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ171)

The temperature transmitters consist completely of stainless steel.
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: in well


Temperature range: 0...300C
Immersion depth: max. 200mm


PZ171-200/400

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ171)

The temperature transmitters consist completely of stainless steel.
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: in well


Temperature range: 0...400C
Immersion depth: max. 200mm


PZ171-200/50

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ171)

The temperature transmitters consist completely of stainless steel.
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: in well


Temperature range: 0...50C
Immersion depth: max. 200mm


PZ171-200/51

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ171)

The temperature transmitters consist completely of stainless steel.
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: in well


Temperature range: -50...100C
Immersion depth: max. 200mm


PZ171-200/55

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ171)

The temperature transmitters consist completely of stainless steel.
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: in well


Temperature range: -50...50C
Immersion depth: max. 200mm


PZ171-250/100

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ171)

The temperature transmitters consist completely of stainless steel.
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: in well


Temperature range: 0...100C
Immersion depth: max. 250mm


PZ171-250/200

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ171)

The temperature transmitters consist completely of stainless steel.
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: in well


Temperature range: 0...200C
Immersion depth: max. 250mm


PZ171-250/300

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ171)

The temperature transmitters consist completely of stainless steel.
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: in well


Temperature range: 0...300C
Immersion depth: max. 250mm


PZ171-250/400

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ171)

The temperature transmitters consist completely of stainless steel.
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: in well


Temperature range: 0...400C
Immersion depth: max. 250mm


PZ171-250/50

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ171)

The temperature transmitters consist completely of stainless steel.
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: in well


Temperature range: 0...50C
Immersion depth: max. 250mm


PZ171-250/51

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ171)

The temperature transmitters consist completely of stainless steel.
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: in well


Temperature range: -50...100C
Immersion depth: max. 250mm


PZ171-250/55

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ171)

The temperature transmitters consist completely of stainless steel.
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: in well


Temperature range: -50...50C
Immersion depth: max. 250mm


PZ177-100/100

Honeywell Temperature Transmitter, Pt100, with air duct probe (PZ177)

The temperature transmitters consist completely of stainless steel (not for humid and aggressive media).
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: air duct


Temperature range: 0...100C
Immersion depth: max. 100mm


PZ177-100/200

Honeywell Temperature Transmitter, Pt100, with air duct probe (PZ177)

The temperature transmitters consist completely of stainless steel (not for humid and aggressive media).
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: air duct


Temperature range: 0...200C
Immersion depth: max. 100mm


PZ177-100/300

Honeywell Temperature Transmitter, Pt100, with air duct probe (PZ177)

The temperature transmitters consist completely of stainless steel (not for humid and aggressive media).
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: air duct


Temperature range: 0...300C
Immersion depth: max. 100mm


PZ177-100/400

Honeywell Temperature Transmitter, Pt100, with air duct probe (PZ177)

The temperature transmitters consist completely of stainless steel (not for humid and aggressive media).
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: air duct


Temperature range: 0...400C
Immersion depth: max. 100mm


PZ177-100/50

Honeywell Temperature Transmitter, Pt100, with air duct probe (PZ177)

The temperature transmitters consist completely of stainless steel (not for humid and aggressive media).
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: air duct


Temperature range: 0...50C
Immersion depth: max. 100mm


PZ177-100/51

Honeywell Temperature Transmitter, Pt100, with air duct probe (PZ177)

The temperature transmitters consist completely of stainless steel (not for humid and aggressive media).
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: air duct


Temperature range: -50...100C
Immersion depth: max. 100mm


PZ177-100/55

Honeywell Temperature Transmitter, Pt100, with air duct probe (PZ177)

The temperature transmitters consist completely of stainless steel (not for humid and aggressive media).
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: air duct


Temperature range: -50...50C
Immersion depth: max. 100mm


PZ177-150/100

Honeywell Temperature Transmitter, Pt100, with air duct probe (PZ177)

The temperature transmitters consist completely of stainless steel (not for humid and aggressive media).
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: air duct


Temperature range: 0...100C
Immersion depth: max. 150mm


PZ177-150/200

Honeywell Temperature Transmitter, Pt100, with air duct probe (PZ177)

The temperature transmitters consist completely of stainless steel (not for humid and aggressive media).
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: air duct


Temperature range: 0...200C
Immersion depth: max. 150mm


PZ177-150/300

Honeywell Temperature Transmitter, Pt100, with air duct probe (PZ177)

The temperature transmitters consist completely of stainless steel (not for humid and aggressive media).
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: air duct


Temperature range: 0...300C
Immersion depth: max. 150mm


PZ177-150/400

Honeywell Temperature Transmitter, Pt100, with air duct probe (PZ177)

The temperature transmitters consist completely of stainless steel (not for humid and aggressive media).
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: air duct


Temperature range: 0...400C
Immersion depth: max. 150mm


PZ177-150/50

Honeywell Temperature Transmitter, Pt100, with air duct probe (PZ177)

The temperature transmitters consist completely of stainless steel (not for humid and aggressive media).
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: air duct


Temperature range: 0...50C
Immersion depth: max. 150mm


PZ177-150/51

Honeywell Temperature Transmitter, Pt100, with air duct probe (PZ177)

The temperature transmitters consist completely of stainless steel (not for humid and aggressive media).
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: air duct


Temperature range: -50...100C
Immersion depth: max. 150mm


PZ177-150/55

Honeywell Temperature Transmitter, Pt100, with air duct probe (PZ177)

The temperature transmitters consist completely of stainless steel (not for humid and aggressive media).
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: air duct


Temperature range: -50...50C
Immersion depth: max. 150mm


PZ177-200/100

Honeywell Temperature Transmitter, Pt100, with air duct probe (PZ177)

The temperature transmitters consist completely of stainless steel (not for humid and aggressive media).
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: air duct


Temperature range: 0...100C
Immersion depth: max. 200mm


PZ177-200/200

Honeywell Temperature Transmitter, Pt100, with air duct probe (PZ177)

The temperature transmitters consist completely of stainless steel (not for humid and aggressive media).
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: air duct


Temperature range: 0...200C
Immersion depth: max. 200mm


PZ177-200/300

Honeywell Temperature Transmitter, Pt100, with air duct probe (PZ177)

The temperature transmitters consist completely of stainless steel (not for humid and aggressive media).
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: air duct


Temperature range: 0...300C
Immersion depth: max. 200mm


PZ177-200/400

Honeywell Temperature Transmitter, Pt100, with air duct probe (PZ177)

The temperature transmitters consist completely of stainless steel (not for humid and aggressive media).
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: air duct


Temperature range: 0...400C
Immersion depth: max. 200mm


PZ177-200/50

Honeywell Temperature Transmitter, Pt100, with air duct probe (PZ177)

The temperature transmitters consist completely of stainless steel (not for humid and aggressive media).
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: air duct


Temperature range: 0...50C
Immersion depth: max. 200mm


PZ177-200/51

Honeywell Temperature Transmitter, Pt100, with air duct probe (PZ177)

The temperature transmitters consist completely of stainless steel (not for humid and aggressive media).
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: air duct


Temperature range: -50...100C
Immersion depth: max. 200mm


PZ177-200/55

Honeywell Temperature Transmitter, Pt100, with air duct probe (PZ177)

The temperature transmitters consist completely of stainless steel (not for humid and aggressive media).
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: air duct


Temperature range: -50...50C
Immersion depth: max. 200mm


PZ177-250/100

Honeywell Temperature Transmitter, Pt100, with air duct probe (PZ177)

The temperature transmitters consist completely of stainless steel (not for humid and aggressive media).
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: air duct


Temperature range: 0...100C
Immersion depth: max. 250mm


PZ177-250/200

Honeywell Temperature Transmitter, Pt100, with air duct probe (PZ177)

The temperature transmitters consist completely of stainless steel (not for humid and aggressive media).
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: air duct


Temperature range: 0...200C
Immersion depth: max. 250mm


PZ177-250/300

Honeywell Temperature Transmitter, Pt100, with air duct probe (PZ177)

The temperature transmitters consist completely of stainless steel (not for humid and aggressive media).
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: air duct


Temperature range: 0...300C
Immersion depth: max. 250mm


PZ177-250/400

Honeywell Temperature Transmitter, Pt100, with air duct probe (PZ177)

The temperature transmitters consist completely of stainless steel (not for humid and aggressive media).
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: air duct


Temperature range: 0...400C
Immersion depth: max. 250mm


PZ177-250/50

Honeywell Temperature Transmitter, Pt100, with air duct probe (PZ177)

The temperature transmitters consist completely of stainless steel (not for humid and aggressive media).
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: air duct


Temperature range: 0...50C
Immersion depth: max. 250mm


PZ177-250/51

Honeywell Temperature Transmitter, Pt100, with air duct probe (PZ177)

The temperature transmitters consist completely of stainless steel (not for humid and aggressive media).
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: air duct


Temperature range: -50...100C
Immersion depth: max. 250mm


PZ177-250/55

Honeywell Temperature Transmitter, Pt100, with air duct probe (PZ177)

The temperature transmitters consist completely of stainless steel (not for humid and aggressive media).
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571, transmitter housing: high-grade steel 1.4301
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Mounting place: air duct


Temperature range: -50...50C
Immersion depth: max. 250mm


PZ200

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ)

The temperature transmitters consist completely of stainless steel.
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Temperature range: -50...400C
Mounting place: in well


Immersion depth: 200mm


PZ250

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ)

The temperature transmitters consist completely of stainless steel.
Protection class: IP65
Electrical connection: PG11
Materials: high-grade steel 1.4571
Power supply: 12..36Vdc
Output signal: 4..20mA
Temperature element: Pt100
Temperature range: -50...400C
Mounting place: in well


Immersion depth: 250mm


Q6371A1006

Honeywell Switching module, Q6371

Wall mounted switching module.
For manual control of the valve, or the valve and the fan in fan-coil applications.
Approvals: CE
Protection class: IP30
Switch function/capacity: manual switch outputs, 230Vac, 6 A resistive, 4 A inductive ratings
Terminal max. wire size: 1.5mm2
Manual operation functions: on/off switch
Product literature language: Multilingual
Earthing: double insulated
Housing (HxWxD): 83mm|84mm|27mm


Heating /Cooling application: H or C
Fan switch: 1/2/3
Heat/Cool manual mode: no


Q6371C1002

Honeywell Switching module, Q6371

Wall mounted switching module.
For manual control of the valve, or the valve and the fan in fan-coil applications.
Approvals: CE
Protection class: IP30
Switch function/capacity: manual switch outputs, 230Vac, 6 A resistive, 4 A inductive ratings
Terminal max. wire size: 1.5mm2
Manual operation functions: on/off switch
Product literature language: Multilingual
Earthing: double insulated
Housing (HxWxD): 83mm|84mm|27mm


Heating /Cooling application: H + C
Fan switch: yes
Heat/Cool manual mode: H/C


Q6371C1010

Honeywell Switching module, Q6371

Wall mounted switching module.
For manual control of the valve, or the valve and the fan in fan-coil applications.
Approvals: CE
Protection class: IP30
Switch function/capacity: manual switch outputs, 230Vac, 6 A resistive, 4 A inductive ratings
Terminal max. wire size: 1.5mm2
Manual operation functions: on/off switch
Product literature language: Multilingual
Earthing: double insulated
Housing (HxWxD): 83mm|84mm|27mm


Heating /Cooling application: H + C
Fan switch: 1/2/3
Heat/Cool manual mode: H/C


Q642A1008

Honeywell Outputmodule, 2 control-outputs, Micronik100, Q642A

Outputmodule with 2 outputs for 2 control-deviation signals from other Micronik100 modules.
Control output signal: 2..10V= control output (2x)
Parameter settings: potentiometers for throttling ranges, direct/reverse acting switch
Analogue input functions: 2 inputs for deviation signals from other Micronik100 controllers
Digital input functions: for each control loop: override function for fully open/closed position of control output with external contact
Special input functions: for each control loop: control output signal limitation with external 100k potentiometer
Mounting: back panel, wall, DIN-rail or front door
Protection class: IP30
Wiring connection: screw terminals, max. 2 x 1,5 mm2
LED-indication for each output.
Power supply: 24Vac
Housing (HxWxD): 132mm|47mm|141mm


Q642D1005

Honeywell High-Low selector module, 1 control-output, Micronik100, Q642D

Outputmodule with 1 output for high/low preference of 2 control-deviation signals from other Micronik100 modules.
Control output signal: 2..10V= control output
Parameter settings: potentiometer for throttling range; direct/reverse acting switch
Analogue input functions: 2 inputs for deviation signals from other Micronik100 controllers
Digital input functions: override function for fully open/closed position of control output with external contact
Special input functions: control output signal limitation with external 100k potentiometer
Mounting: back panel, wall, DIN-rail or front door
Protection class: IP30
Wiring connection: screw terminals, max. 2 x 1,5 mm2
LED-indication for output.
Power supply: 24Vac
Housing (HxWxD): 132mm|47mm|141mm


Q642E1004

Honeywell Floating alarm module, 2 relays-outputs, Micronik100, Q642E1004

Outputmodule with 2 relays for indication of min./max. value of a control-deviation signal from another Micronik100 module.
Parameter settings: potentiometers for min./max. value and differential value (2x)
Analogue input functions: 1 input for deviation signal from other Micronik100 controller
Mounting: back panel, wall, DIN-rail or front door
Protection class: IP30
Wiring connection: screw terminals, max. 2 x 1,5 mm2
LED-indication for each output. relays contacts SPDT; capacity 1A; 48V~.
Power supply: 24Vac
Housing (HxWxD): 132mm|47mm|141mm


Q642J1008

Honeywell Step controller module, 4 heating and 4 cooling outputs 24V, Micronik100, Q642J

Outputmodule with 4 outputs heating and 4 outputs cooling.
Control output signal: 24V=, capacity 100mA (8x)
Parameter settings: potentiometers for throttling ranges, switching differentials, timedelay etc.
Analogue input functions: deviation signal from other Micronik100 controller, or 2..10V= control signal
Mounting: back panel, wall, DIN-rail or front door
Protection class: IP30
Wiring connection: screw terminals, max. 2 x 1,5 mm2
LED-indication for 4 outputs, and indication heat or cool.
Power supply: 24Vac
Housing (HxWxD): 132mm|47mm|141mm


Q642L1006

Honeywell Step controller module, 4 outputs 24V, Micronik100, Q642L1006

Outputmodule with 4 outputs for 15 binary stages.
Control output signal: 24V=, capacity 50mA (4x)
Parameter settings: potentiometers for throttling range, switching differential, timedelay etc.
Analogue input functions: deviation signal from other Micronik100 controller, or 2..10V= control signal
Mounting: back panel, wall, DIN-rail or front door
Protection class: IP30
Wiring connection: screw terminals, max. 2 x 1,5 mm2
LED-indication for each output.
Power supply: 24Vac
Housing (HxWxD): 132mm|47mm|141mm


Q642V1004

Honeywell Step controller module, 2 x 8 outputs 24V (or modulating) Micronik100, Q642V

Outputmodule with 8 steps cooling and 8 steps heating.
Optional heating mode: 1 modulating output/3 step outputs.
Control output signal: 24V=, capacity 50mA (16x); modulating output PWM 2/14 volt, or 2..10V= control signal
Parameter settings: potentiometers for throttling range, switching differential, timedelay etc.
Analogue input functions: deviation signal from other Micronik100 controller, or 2..10V= control signal
Mounting: back panel, wall, DIN-rail or front door
Protection class: IP30
Wiring connection: screw terminals, max. 2 x 1,5 mm2
LED-indication for 8 outputs, and indication heat or cool.
Power supply: 24Vac
Housing (HxWxD): 132mm|47mm|141mm


Q7014A1007

Honeywell LION digital input/output module, LonMark, Q7014A1007 Q7014B1005

LON modules for decentralized contact inputs or switching outputs. For integration with other LON modules in an Echelon FTT10A 2 wire network environment, to save wiring cables.
Mounting: wall mounting
Transceiver type: FTT10A free topology
Protection class: IP65, halogen-free housing


Power supply: 24Vac
Input signal: 4 digital inputs potential free
Output signal: LonTalk Protocol


Q7014B1005

Honeywell LION digital input/output module, LonMark, Q7014A1007 Q7014B1005

LON modules for decentralized contact inputs or switching outputs. For integration with other LON modules in an Echelon FTT10A 2 wire network environment, to save wiring cables.
Mounting: wall mounting
Transceiver type: FTT10A free topology
Protection class: IP65, halogen-free housing


Power supply: 24Vac
Input signal: LonTalk Protocol
Output signal: 4 SPDT relays 250 Vac 2 A


Q7014C1003

Honeywell Fire and smoke damper controller, LON, Q7014C1003

LON module for integration of damper actuators and fire/smoke detectors into LONWORKS(R) networks.
Features for damper actuators:
status monitoring
parameter setting for drive time monitoring
automated maintenance
command for normal or safety position
thermal fuse override
Features for fire/smoke detection:
fire/smoke alarm
pollution warning
air flow failure
electronic failure
Input signal: 8 digital inputs, potential free, or 24Vacdc
Output signal: 4 SPDT relays, max. contact load 250Vac, 1A or 24V, 3A
Mounting: wall mounting, or directly on damper
LonMark(R) profile: FPT 11001 for fire smoke damper actuator
FPT 11003 for smoke (conventional) fire initiator
Transceiver type: FTT10A free topology
Protection class: IP65
Power supply: 24Vacdc


Q7055B1047

Honeywell Open View Net server, Q7055B, OVN-VCHR

The Q7055B1047 Open View Net Server (OVN) is a Web-enabled operator interface that facilitates secure and easy access to a Honeywell Building Management System (BMS) through the Internet. It provides a connection of a Honeywell XL5000 controller communication bus to an industry standard TCP/IP Ethernet LAN/WAN, delivering exceptional price/performance to meet the requirements of both building owners and service providers.


Product description: Open View Net base unit for 1 controller


Q7750A2003

Honeywell Excel 10 Zone Manager, Q7750A

The Q7750A Excel 10 Zone Manager is a programmable master controller for an Excel 10 subsystem. It provides energy management functions and communication interfaces between EXCEL 5000 System products and the Excel 10 Echelon LONWORKS (E-Bus) network. The Q7750A provides C-Bus (9600 baud and 1M baud) and E-Bus (78k baud) communication interfaces. It also maps user selectable Excel 10 subsystem data points into C-Bus points with a full set of point attributes, including user addresses.


Q978A1014

Honeywell Electronic room controller 24Vac 2 x 3-position modulating output, T8078B
Accessories

Remote setpoint module with voltage output



Q978A1022

Honeywell Electronic room controller 24Vac 2 x 3-position modulating output, T8078B
Accessories

Remote sensor and setpoint module with voltage output



Q979A1012

Honeywell Electronic room controller 24Vac 2 x 3-position modulating output, T8078B
Accessories

Wall mounted space temperature sensor



Q979B1011

Honeywell Electronic room controller 24Vac 1 x 3-position modulating output, T8392
Accessories

Remote setpoint module with resistance output



Q979C1028

Honeywell Electronic room controller 24Vac 1 x 3-position modulating output, T8392
Accessories

Remote sensor and setpoint module with resistance output



R10/MS

Honeywell Immersion thermostat for vessels, baths, tanks etc., TXM TNM
Replacement wells

Immersion well brass, R1/2", 135mm



R10/NST

Honeywell Immersion thermostat for vessels, baths, tanks etc., TXM TNM
Replacement wells

Immersion well steel, R1/2", 135mm



R12-100

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ)
Accessories

Immersion tube, R1/2, immersion length 100 mm



R12-150

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ)
Accessories

Immersion tube, R1/2, immersion length 150 mm



R12-200

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ)
Accessories

Immersion tube, R1/2, immersion length 200 mm



R12-250

Honeywell Temperature Transmitter, Pt100, with immersion probe (PZ)
Accessories

Immersion tube, R1/2, immersion length 250 mm



R185-100

Honeywell Immersion probe temperature sensor, stainless steel P171 P271
Accessories

Immersion tube, G1/2, immersion length 100 mm



R185-150

Honeywell Immersion probe temperature sensor, stainless steel P171 P271
Accessories

Immersion tube, G1/2, immersion length 150 mm



R185-200

Honeywell Immersion probe temperature sensor, stainless steel P171 P271
Accessories

Immersion tube, G1/2, immersion length 200 mm



R185-250

Honeywell Immersion probe temperature sensor, stainless steel P171 P271
Accessories

Immersion tube, G1/2, immersion length 250 mm



R187

Honeywell Air duct probe temperature sensor, stainless steel P177 P277
Accessories

Mounting flange, steinless steel 1.4571



R20/MS

Honeywell Immersion thermostat for vessels, baths, tanks etc., TXM TNM
Replacement wells

Immersion well brass, R1/2", 220mm



R20/NST

Honeywell Immersion thermostat for vessels, baths, tanks etc., TXM TNM
Replacement wells

Immersion well steel, R1/2", 220mm



R4

Honeywell Frost protection thermostat for duct mounting (FT)
Accessories

Capillary tube bushing, not pressure-tight



R5

Honeywell Frost protection thermostat for duct mounting (FT)
Accessories

Capillary tube bushing, not pressure-tight



R7420B1036

Honeywell Temperature controller, 1 control output, Micronik100, R7420B

Digital temperature controller, LC-display and pushbuttons, and 1 control-output. The controller can be combined with other Micronik100 modules.
For valve or damper control in air- or water temperature applications.
Control output signal: 2..10V= control output, and setpoint deviation signals for connection to other Micronik100 modules
Control functions: PI main temperature control, limit control, cascade control, outside air compensation control
Main setpoint adjustment: internal parameter, or external potentiometer
Parameter settings: temperature setpoints, throttling ranges, reset time, summer/winter compensation authority, sensor calibration, direct/reverse acting etc.
Analogue input functions: 3 inputs for: main-, limit/cascade-, compensation temperature
Applicable sensor types: Pt1000, Balco500
Digital input functions: override function for fully open/closed position of control output with external contact; occupancy switch with external contact
Special input functions: control output signal limitation with external 100k potentiometer
Mounting: back panel, wall, DIN-rail or front door
Protection class: IP30
Wiring connection: screw terminals, max. 2 x 1,5 mm2
Power supply: 24Vac
Main temperature control range: 0...50C
Additional main temperature control range: 0...130C
Housing (HxWxD): 132mm|47mm|141mm


R7420E1005

Honeywell Mixed air temperature controller, 1 control output, Micronik100, R7420E1005

Temperature controller for mixed air applications with 1 control-output. The controller can be combined with other Micronik100 modules.
For damper control in air handling units.
Control output signal: 2..10V= control output, and setpoint deviation signal for connection to other Micronik100 modules
Control functions: proportional control of mixed air temperature, outside air compensation control
Main setpoint adjustment: internal potentiometer
Parameter settings: potentiometers for: temperature setpoints, winter and summer control, throttling ranges, min. pos. air dampers; direct/reverse acting switch
Analogue input functions: 2 inputs for: main- and outdoor temperature
Applicable sensor types: Balco500
Digital input functions: override function for fully open/closed position of control output with external contact; minimum position air dampers with external contact
Mounting: back panel, wall, DIN-rail or front door
Protection class: IP30
Wiring connection: screw terminals, max. 2 x 1,5 mm2
LED-indication for output
Power supply: 24Vac
Main temperature control range: 5...20C
Housing (HxWxD): 132mm|47mm|141mm


R7420F1045

Honeywell R.H.- controller, 1 control output, Micronik100, R7420F

Digital R.H.-controller, LC-display and pushbuttons, and 1 control-output. The controller can be combined with other Micronik100 modules.
For humidifier valve control.
Control output signal: 2..10V= control output, setpoint deviation signals and R.H.-signals for connection to other Micronik100 modules
Control functions: PI R.H.-control, R.H.-limit control, outside air compensation control
Main setpoint adjustment: internal parameter, or external potentiometer
Parameter settings: R.H.-setpoints, throttling ranges, reset time, winter compensation authority, sensor calibration, direct/reverse acting etc.
Analogue input functions: 2 inputs for: main-R.H., max. R.H.; 1 input for compensation temperature
Applicable sensor types: R.H.: 0..1 V= transmitter; temperature: Pt1000, Balco500
Digital input functions: override function for fully open/closed position of control output with external contact; occupancy switch with external contact
Special input functions: control output signal limitation with external 100k potentiometer
Mounting: back panel, wall, DIN-rail or front door
Protection class: IP30
Wiring connection: screw terminals, max. 2 x 1,5 mm2
Power supply: 24Vac
Main control range: 15...95%
Housing (HxWxD): 132mm|47mm|141mm


R7420H1009

Honeywell Universal input controller, 1 control output, Micronik100, R7420H1009

Universal input controller with 1 control-output. The controller can be combined with other Micronik100 modules.
For valve and damper control, covers all special applications, e.g. pressure control etc.
Control output signal: 2..10V= control output, and setpoint deviation signals for connection to other Micronik100 modules
Control functions: PI main temperature control, cascade control
Main setpoint adjustment: potentiometer knob or external potentiometer
Parameter settings: potentiometer for main setpoint, throttling range, reset time, cascade authority; direct/reverse acting switch
Analogue input functions: 2 inputs for: mainsensor, cascade resetsignal
Applicable sensor types: main input: 4..20 mA or 2..10 V transmitter; 30 or 135 ohm; potentiometer, 2..10V cascade reset(from other Micronik100 module)
Digital input functions: override function for fully open/closed position of control output with external contact
Special input functions: control output signal limitation with external 100k potentiometer
Mounting: back panel, wall, DIN-rail or front door
Protection class: IP30
Wiring connection: screw terminals, max. 2 x 1,5 mm2
Power supply: 24Vac
Main control range: 0...100%
Housing (HxWxD): 132mm|47mm|141mm


R7426A2006

Honeywell Temperature controller, 1 control output, Micronik200, R7426A

Digital temperature controller, LC-display, pushbuttons, setpoint potentiometer, and 1 control-output.
For valve or damper control in air- or water temperature applications.
Control output signal: 2 triacs (24V~, 450mA) configurable for 2-pt, 3-pt, PWM or 2/3-stage control
Control functions: main temperature control, limit control, cascade control, outside air compensation control
Main setpoint adjustment: built in setpoint potentiometer, or external potentiometer
Modes of operation: off, standby, comfort, summer/winter change-over, frost protection
Parameter settings: temperature setpoints, throttling ranges, reset time, summer/winter compensation authority, sensor calibration etc.
Analogue input functions: 3 inputs for: main-, limit/cascade-, and compensation temperature sensors
Applicable sensor types: Pt1000, Balco500, NTC20k
Digital input functions: frost protection with external contact
Special input functions: occupancy- or summer/winter changeover contact and plant on/off input
Mounting: back panel, wall, DIN-rail or front door (with additional mounting frame)
Protection class: IP30, IP40 (front panel mounting)
Wiring connection: screw terminals, max. 1 x 1,5 mm2
Power supply: 24Vac
Main temperature control range: 0...50C
Additional main temperature control range: 0...130C
Housing (HxWxD): 105mm|152mm|37mm


R7426A2014

Honeywell Temperature controller with clock, 1 control output, Micronik200, R7426A

Digital temperature controller with real time clock, LC-display, pushbuttons, setpoint potentiometer, and 1 control-output.
For valve or damper control in air- or water temperature applications.
Control output signal: 2 triacs (24V~, 450mA) configurable for 2-pt, 3-pt, PWM or 2/3-stage control
Plant output: 1 on/off output (24V~) for plant, pump, fan etc.
Control functions: main temperature control, limit control, cascade control, outside air compensation control
Main setpoint adjustment: built in setpoint potentiometer, or external potentiometer
Modes of operation: off, night, standby, comfort, optimum start, night cycle, summer/winter change-over, frost protection
Time program: yearly real time clock with 3 holiday schedules, week program with 6 switching points/day; automatic daylight saving programs
Parameter settings: temperature setpoints, throttling ranges, reset time, summer/winter compensation authority, sensor calibration etc.
Analogue input functions: 3 inputs for: main-, limit/cascade-, and compensation temperature sensors
Applicable sensor types: Pt1000, Balco500, NTC20k
Digital input functions: frost protection with external contact
Special input functions: occupancy- or summer/winter changeover contact
Mounting: back panel, wall, DIN-rail or front door (with additional mounting frame)
Protection class: IP30, IP40 (front panel mounting)
Wiring connection: screw terminals, max. 1 x 1,5 mm2
Power supply: 24Vac
Main temperature control range: 0...50C
Additional main temperature control range: 0...130C
Housing (HxWxD): 105mm|152mm|37mm


R7426B2004

Honeywell Temperature controller, 3 control outputs, Micronik200, R7426B R7426C

Digital temperature controller, LC-display, pushbuttons, setpoint potentiometer, and 3 control-outputs.
For valve and damper control in space- and/or discharge air applications, with heating - mixed air/energy recovery - cooling sequence control
Control output signal: Model B: 6 triacs (24V~, 450mA) configurable for 2-pt, 3-pt, PWM or 2/3/4/6/15-stage control; Model C: 3 x 0/2..10V= outputs
Control functions: cascade, outside air compensation, sequence and dehumidification control
Main setpoint adjustment: built in setpoint potentiometer, or external potentiometer
Modes of operation: off, standby, comfort, economizer, frost protection
Parameter settings: temperature setpoints, throttling ranges, reset time, summer/winter compensation authority, sensor calibration etc.
Analogue input functions: 3 inputs for: main-, cascade- and compensation temperature sensors
Applicable sensor types: Pt1000, Balco500, NTC20k
Digital input functions: frost protection with external contact
Special input functions: occupancy contact; humidity deviation signal; and plant on/off input
Mounting: back panel, wall, DIN-rail or front door (with additional mounting frame)
Protection class: IP30, IP40 (front panel mounting)
Wiring connection: screw terminals, max. 1 x 1,5 mm2
Power supply: 24Vac
Main temperature control range: 0...50C
Housing (HxWxD): 105mm|152mm|37mm


Control output: triac


R7426B2012

Honeywell Temperature controller with clock, 3 control outputs, Micronik200, R7426B R7426C

Digital temperature controller with real time clock, LC-display, pushbuttons, setpoint potentiometer, and 3 control-outputs.
For valve and damper control in space- and/or discharge air applications, with heating - mixed air/energy recovery - cooling sequence control
Control output signal: Model B: 6 triacs (24V~, 450mA) configurable for 2-pt, 3-pt, PWM or 2/3/4/6/15-stage control; Model C: 3 x 0/2..10V= outputs
Plant output: 1 on/off output (24V~) for plant, pump, fan etc.
Control functions: cascade, outside air compensation, sequence and dehumidification control
Main setpoint adjustment: built in setpoint potentiometer, or external potentiometer
Modes of operation: off, night, standby, comfort, optimum start, night cycle, economizer, frost protection
Time program: yearly real time clock with 3 holiday schedules, week program with 6 switching points/day; automatic daylight saving programs
Parameter settings: temperature setpoints, throttling ranges, reset time, summer/winter compensation authority, sensor calibration etc.
Analogue input functions: 3 inputs for: main-, cascade- and compensation temperature sensors
Applicable sensor types: Pt1000, Balco500, NTC20k
Digital input functions: frost protection with external contact
Special input functions: occupancy contact; humidity deviation signal
Mounting: back panel, wall, DIN-rail or front door (with additional mounting frame)
Protection class: IP30, IP40 (front panel mounting)
Wiring connection: screw terminals, max. 1 x 1,5 mm2
Power supply: 24Vac
Main temperature control range: 0...50C
Additional main temperature control range: 0...130C
Housing (HxWxD): 105mm|152mm|37mm


Control output: triac


R7426C2002

Honeywell Temperature controller, 3 control outputs, Micronik200, R7426B R7426C

Digital temperature controller, LC-display, pushbuttons, setpoint potentiometer, and 3 control-outputs.
For valve and damper control in space- and/or discharge air applications, with heating - mixed air/energy recovery - cooling sequence control
Control output signal: Model B: 6 triacs (24V~, 450mA) configurable for 2-pt, 3-pt, PWM or 2/3/4/6/15-stage control; Model C: 3 x 0/2..10V= outputs
Control functions: cascade, outside air compensation, sequence and dehumidification control
Main setpoint adjustment: built in setpoint potentiometer, or external potentiometer
Modes of operation: off, standby, comfort, economizer, frost protection
Parameter settings: temperature setpoints, throttling ranges, reset time, summer/winter compensation authority, sensor calibration etc.
Analogue input functions: 3 inputs for: main-, cascade- and compensation temperature sensors
Applicable sensor types: Pt1000, Balco500, NTC20k
Digital input functions: frost protection with external contact
Special input functions: occupancy contact; humidity deviation signal; and plant on/off input
Mounting: back panel, wall, DIN-rail or front door (with additional mounting frame)
Protection class: IP30, IP40 (front panel mounting)
Wiring connection: screw terminals, max. 1 x 1,5 mm2
Power supply: 24Vac
Main temperature control range: 0...50C
Housing (HxWxD): 105mm|152mm|37mm


Control output: 0/2..10V=


R7426C2010

Honeywell Temperature controller with clock, 3 control outputs, Micronik200, R7426B R7426C

Digital temperature controller with real time clock, LC-display, pushbuttons, setpoint potentiometer, and 3 control-outputs.
For valve and damper control in space- and/or discharge air applications, with heating - mixed air/energy recovery - cooling sequence control
Control output signal: Model B: 6 triacs (24V~, 450mA) configurable for 2-pt, 3-pt, PWM or 2/3/4/6/15-stage control; Model C: 3 x 0/2..10V= outputs
Plant output: 1 on/off output (24V~) for plant, pump, fan etc.
Control functions: cascade, outside air compensation, sequence and dehumidification control
Main setpoint adjustment: built in setpoint potentiometer, or external potentiometer
Modes of operation: off, night, standby, comfort, optimum start, night cycle, economizer, frost protection
Time program: yearly real time clock with 3 holiday schedules, week program with 6 switching points/day; automatic daylight saving programs
Parameter settings: temperature setpoints, throttling ranges, reset time, summer/winter compensation authority, sensor calibration etc.
Analogue input functions: 3 inputs for: main-, cascade- and compensation temperature sensors
Applicable sensor types: Pt1000, Balco500, NTC20k
Digital input functions: frost protection with external contact
Special input functions: occupancy contact; humidity deviation signal
Mounting: back panel, wall, DIN-rail or front door (with additional mounting frame)
Protection class: IP30, IP40 (front panel mounting)
Wiring connection: screw terminals, max. 1 x 1,5 mm2
Power supply: 24Vac
Main temperature control range: 0...50C
Additional main temperature control range: 0...130C
Housing (HxWxD): 105mm|152mm|37mm


Control output: 0/2..10V=


R7426D2000

Honeywell Universal input controller, 2 control outputs, Micronik200, R7426D

Digital universal input controller with LC-display, pushbuttons, setpoint potentiometer, and 2 control-outputs.
For space, discharge air humidity control applications, and special applications, e.g. pressure control.
Control output signal: 0/2..10V= output and main value deviation signal
Plant output: 1 on/off output (24V~) for plant, pump, fan etc.
Control functions: PID main (temperature) control, limit control, cascade control, outside air compensation control
Main setpoint adjustment: built in setpoint potentiometer, or external potentiometer
Parameter settings: setpoints, throttling ranges, reset time, summer/winter compensation authority, sensor calibration etc.
Analogue input functions: 2 inputs for: master and submaster or limit sensor
Applicable sensor types: transmitters within the specified input ranges 0..10 V= or 0..20 mA
Digital input functions: plant on/off with external contact or by controller with real time clock
Special input functions: compensation temperature sensor, Pt1000, Balco500, NTC20k
Mounting: back panel, wall, DIN-rail or front door (with additional mounting frame)
Protection class: IP30, IP40 (front panel mounting)
Wiring connection: screw terminals, max. 1 x 1,5 mm2
Power supply: 24Vac
Main control range: 0...100%
Housing (HxWxD): 105mm|152mm|37mm


R7451A1022

Honeywell Multicontroller, IRC, R7451A

Central processing unit for IRC system network
Power supply and data communication for max. 2 x 16 local VAV control and temperature input and output modules.
Network operation: C-bus, 2 x R-bus
Power supply: 24Vac


Model: no analogue inputs


R7451A1030

Honeywell Multicontroller, IRC, R7451A

Central processing unit for IRC system network
Power supply and data communication for max. 2 x 16 local VAV control and temperature input and output modules.
Network operation: C-bus, 2 x R-bus
Power supply: 24Vac


Model: 1 analogue input for temperature sensor NTC20k and 2 analogue inputs for R.H. sensor 0..1Vdc


R7452A1005

Honeywell Control ouput module for hydronic installations, IRC, R7452A R7452B R7452C

Provides accurate position control of final control devices in HVAC installations.
For heater and/or cooler in hydronic installations.
Heating output signal: triac (24 Vac, 450 mA) configurable for 2-pt, 3-pt, PWM or single/multistage control
Cooling output signal: triac (24 Vac, 450 mA)
Control functions: heat only, cool only, heat and cool in sequence, zero energy band
Modes of operation: occupied, standby, unoccupied, open window
Obligatory inputs: room temperature via R-bus
Optional inputs: 1 digital input configurable for: window or occupancy
Stand-alone operation: No
Bus system description: Room bus IRC
Power supply: 24Vac


Model: Heat or Cool


R7452B1003

Honeywell Control ouput module for hydronic installations, IRC, R7452A R7452B R7452C

Provides accurate position control of final control devices in HVAC installations.
For heater and/or cooler in hydronic installations.
Heating output signal: triac (24 Vac, 450 mA) configurable for 2-pt, 3-pt, PWM or single/multistage control
Cooling output signal: triac (24 Vac, 450 mA)
Control functions: heat only, cool only, heat and cool in sequence, zero energy band
Modes of operation: occupied, standby, unoccupied, open window
Obligatory inputs: room temperature via R-bus
Optional inputs: 1 digital input configurable for: window or occupancy
Stand-alone operation: No
Bus system description: Room bus IRC
Power supply: 24Vac


Model: Heat + Cool


R7452C1027

Honeywell Control ouput module for hydronic installations, IRC, R7452A R7452B R7452C

Provides accurate position control of final control devices in HVAC installations.
For heater and/or cooler in hydronic installations.
Heating output signal: triac (24 Vac, 450 mA) configurable for 2-pt, 3-pt, PWM or single/multistage control
Cooling output signal: triac (24 Vac, 450 mA)
Control functions: heat only, cool only, heat and cool in sequence, zero energy band
Modes of operation: occupied, standby, unoccupied, open window
Obligatory inputs: room temperature via R-bus
Optional inputs: 1 digital input configurable for: window or occupancy
Stand-alone operation: No
Bus system description: Room bus IRC
Power supply: 24Vac


Model: Heat + Cool + input for room temperature sensor NTC20k with control point adjustment, and occupancy contact


R7452D1001

Honeywell Control output module for fancoil unit, IRC, R7452D R7452E R7452F

Room temperature control module for fan coil units.
For heater and cooler, and 1 (2,3)-speed fans.
Heating output signal: triac (24 Vac, 450 mA) configurable for 2-pt, 3-pt, PWM or single/multistage control
Cooling output signal: triac (24 Vac, 450 mA) configurable for 2-pt, 3-pt, PWM or single/multistage control
Fan output signal: 1/3 relais (230 Vac, 8A)
Auxiliary output signal: for R7452F1007; relay (230 Vac, 8A) for light on/off
Control functions: heat only, cool only, heat and cool in sequence, zero energy band
Modes of operation: occupied, standby, unoccupied, open window
Obligatory inputs: 2 analogue inputs for room temperature sensor NTC20k and control point adjustment
Optional inputs: 2 digital inputs for window and occupancy
for R7452E/F models: fan switch input auto-0-1-2-3
Stand-alone operation: No
Bus system description: Room bus IRC
Power supply: 24Vac


Fan speed outputs: 1
Model: no


R7452D1025

Honeywell Control output module for fancoil unit, IRC, R7452D R7452E R7452F

Room temperature control module for fan coil units.
For heater and cooler, and 1 (2,3)-speed fans.
Heating output signal: triac (24 Vac, 450 mA) configurable for 2-pt, 3-pt, PWM or single/multistage control
Cooling output signal: triac (24 Vac, 450 mA) configurable for 2-pt, 3-pt, PWM or single/multistage control
Fan output signal: 1/3 relais (230 Vac, 8A)
Auxiliary output signal: for R7452F1007; relay (230 Vac, 8A) for light on/off
Control functions: heat only, cool only, heat and cool in sequence, zero energy band
Modes of operation: occupied, standby, unoccupied, open window
Obligatory inputs: 2 analogue inputs for room temperature sensor NTC20k and control point adjustment
Optional inputs: 2 digital inputs for window and occupancy
for R7452E/F models: fan switch input auto-0-1-2-3
Stand-alone operation: No
Bus system description: Room bus IRC
Power supply: 24Vac

Models for fixed wiring connections, non plug-in design
Fan speed outputs: 1
Model: no


R7452E1009

Honeywell Control output module for fancoil unit, IRC, R7452D R7452E R7452F

Room temperature control module for fan coil units.
For heater and cooler, and 1 (2,3)-speed fans.
Heating output signal: triac (24 Vac, 450 mA) configurable for 2-pt, 3-pt, PWM or single/multistage control
Cooling output signal: triac (24 Vac, 450 mA) configurable for 2-pt, 3-pt, PWM or single/multistage control
Fan output signal: 1/3 relais (230 Vac, 8A)
Auxiliary output signal: for R7452F1007; relay (230 Vac, 8A) for light on/off
Control functions: heat only, cool only, heat and cool in sequence, zero energy band
Modes of operation: occupied, standby, unoccupied, open window
Obligatory inputs: 2 analogue inputs for room temperature sensor NTC20k and control point adjustment
Optional inputs: 2 digital inputs for window and occupancy
for R7452E/F models: fan switch input auto-0-1-2-3
Stand-alone operation: No
Bus system description: Room bus IRC
Power supply: 24Vac


Fan speed outputs: 3
Model: with fan switch input


R7452E1022

Honeywell Control output module for fancoil unit, IRC, R7452D R7452E R7452F

Room temperature control module for fan coil units.
For heater and cooler, and 1 (2,3)-speed fans.
Heating output signal: triac (24 Vac, 450 mA) configurable for 2-pt, 3-pt, PWM or single/multistage control
Cooling output signal: triac (24 Vac, 450 mA) configurable for 2-pt, 3-pt, PWM or single/multistage control
Fan output signal: 1/3 relais (230 Vac, 8A)
Auxiliary output signal: for R7452F1007; relay (230 Vac, 8A) for light on/off
Control functions: heat only, cool only, heat and cool in sequence, zero energy band
Modes of operation: occupied, standby, unoccupied, open window
Obligatory inputs: 2 analogue inputs for room temperature sensor NTC20k and control point adjustment
Optional inputs: 2 digital inputs for window and occupancy
for R7452E/F models: fan switch input auto-0-1-2-3
Stand-alone operation: No
Bus system description: Room bus IRC
Power supply: 24Vac

Models for fixed wiring connections, non plug-in design
Fan speed outputs: 3
Model: with fan switch input


R7452F1007

Honeywell Control output module for fancoil unit, IRC, R7452D R7452E R7452F

Room temperature control module for fan coil units.
For heater and cooler, and 1 (2,3)-speed fans.
Heating output signal: triac (24 Vac, 450 mA) configurable for 2-pt, 3-pt, PWM or single/multistage control
Cooling output signal: triac (24 Vac, 450 mA) configurable for 2-pt, 3-pt, PWM or single/multistage control
Fan output signal: 1/3 relais (230 Vac, 8A)
Auxiliary output signal: for R7452F1007; relay (230 Vac, 8A) for light on/off
Control functions: heat only, cool only, heat and cool in sequence, zero energy band
Modes of operation: occupied, standby, unoccupied, open window
Obligatory inputs: 2 analogue inputs for room temperature sensor NTC20k and control point adjustment
Optional inputs: 2 digital inputs for window and occupancy
for R7452E/F models: fan switch input auto-0-1-2-3
Stand-alone operation: No
Bus system description: Room bus IRC
Power supply: 24Vac


Fan speed outputs: 3
Model: with fan switch input + light output


R7452F1020

Honeywell Control output module for fancoil unit, IRC, R7452D R7452E R7452F

Room temperature control module for fan coil units.
For heater and cooler, and 1 (2,3)-speed fans.
Heating output signal: triac (24 Vac, 450 mA) configurable for 2-pt, 3-pt, PWM or single/multistage control
Cooling output signal: triac (24 Vac, 450 mA) configurable for 2-pt, 3-pt, PWM or single/multistage control
Fan output signal: 1/3 relais (230 Vac, 8A)
Auxiliary output signal: for R7452F1007; relay (230 Vac, 8A) for light on/off
Control functions: heat only, cool only, heat and cool in sequence, zero energy band
Modes of operation: occupied, standby, unoccupied, open window
Obligatory inputs: 2 analogue inputs for room temperature sensor NTC20k and control point adjustment
Optional inputs: 2 digital inputs for window and occupancy
for R7452E/F models: fan switch input auto-0-1-2-3
Stand-alone operation: No
Bus system description: Room bus IRC
Power supply: 24Vac

Models for fixed wiring connections, non plug-in design
Fan speed outputs: 3
Model: with fan switch input + light output


R7452G1002

Honeywell Control output module for cooling ceiling, IRC, R7452G

Room temperature control module for cooling ceiling units.
For heater, and cooling ceiling.
Heating output signal: triac (24 Vac, 450 mA) configurable for 2-pt, 3-pt, PWM or single/multistage control
Cooling output signal: triac (24 Vac, 450 mA)
Auxiliary output signal: 1 relay (230 Vac, 8A) for cooling pump
Control functions: heat and cool in sequence, zero energy band
Modes of operation: occupied, standby, unoccupied, open window
Obligatory inputs: room temperature/R.H. via R-bus
Optional inputs: 2 digital inputs for window and occupancy,analogue inputs for cooling ceiling and room temperature sensor NTC20k with control point adjustment
Stand-alone operation: No
Bus system description: Room bus IRC
Power supply: 24Vac


R7453E1008

Honeywell VAV control module, IRC, R7453E R7453F R7453G

For measuring and control of air flow in Variabel Air Volume units.
For cooling via airflow only, or for cooling and heating.
Heating output signal: triac (24 Vac, 450 mA) configurable for 2-pt, 3-pt, PWM or single/multistage control
Re-heat output signal: for R7453G1006: triac (24 Vac, 450 mA) configurable for 2-pt, 3-pt, PWM or single/multistage control; ouput can also be configured for diffuser control
Damper output signal: triac (24 Vac, 450 mA) for 3-pt control
Auxiliary output signal: for R7453G1006: relay (230 Vac, 8A) for light on/off
Obligatory inputs: analogue inputs for room temperature sensor NTC20k with control point adjustment
Optional inputs: 2 digital inputs for window and occupancy
Stand-alone operation: No
Bus system description: Room bus IRC
Power supply: 24Vac


Re-heat output: no
Model: Cooling only


R7453F1003

Honeywell VAV control module, IRC, R7453E R7453F R7453G

For measuring and control of air flow in Variabel Air Volume units.
For cooling via airflow only, or for cooling and heating.
Heating output signal: triac (24 Vac, 450 mA) configurable for 2-pt, 3-pt, PWM or single/multistage control
Re-heat output signal: for R7453G1006: triac (24 Vac, 450 mA) configurable for 2-pt, 3-pt, PWM or single/multistage control; ouput can also be configured for diffuser control
Damper output signal: triac (24 Vac, 450 mA) for 3-pt control
Auxiliary output signal: for R7453G1006: relay (230 Vac, 8A) for light on/off
Obligatory inputs: analogue inputs for room temperature sensor NTC20k with control point adjustment
Optional inputs: 2 digital inputs for window and occupancy
Stand-alone operation: No
Bus system description: Room bus IRC
Power supply: 24Vac


Re-heat output: no
Model: Heat + Cool


R7453G1006

Honeywell VAV control module, IRC, R7453E R7453F R7453G

For measuring and control of air flow in Variabel Air Volume units.
For cooling via airflow only, or for cooling and heating.
Heating output signal: triac (24 Vac, 450 mA) configurable for 2-pt, 3-pt, PWM or single/multistage control
Re-heat output signal: for R7453G1006: triac (24 Vac, 450 mA) configurable for 2-pt, 3-pt, PWM or single/multistage control; ouput can also be configured for diffuser control
Damper output signal: triac (24 Vac, 450 mA) for 3-pt control
Auxiliary output signal: for R7453G1006: relay (230 Vac, 8A) for light on/off
Obligatory inputs: analogue inputs for room temperature sensor NTC20k with control point adjustment
Optional inputs: 2 digital inputs for window and occupancy
Stand-alone operation: No
Bus system description: Room bus IRC
Power supply: 24Vac


Re-heat output: yes
Model: Heat + Cool + Light


R7454A1011

Honeywell Analog control module, IRC, R7454A

Analog control module, for 0-10 Volt signal output in sequence with 3 position output.
For heating and cooling.
Heating output signal: triac (24 Vac, 450 mA) configurable for 2-pt, 3-pt, PWM or single/multistage control
Cooling output signal: 0-10 Vdc ; 0,4 mA
Control functions: heat only, cool only, heat and cool in sequence, zero energy band
Modes of operation: occupied, standby, unoccupied, open window
Obligatory inputs: analogue inputs for room temperature sensor NTC20k with control point adjustment
Optional inputs: 2 digital inputs for window and occupancy
Stand-alone operation: No
Bus system description: Room bus IRC
Power supply: 24Vac


R7455A1002

Honeywell Unit control module, IRC, R7455

Temperature control module, with control point adjustment.
For sequence control of heating and cooling in convectors and induction units.
Heating output signal: triac (24 Vac, 50/450 mA) configurable for 2-pt, 3-pt, PWM or single/multistage control
Cooling output signal: triac (24 Vac, 50/450 mA) for 3-pt control
Control functions: heat only, cool only, heat and cool in sequence, zero energy band
Modes of operation: occupied, standby, unoccupied, open window
Obligatory inputs: analogue input for room temperature sensor NTC20k
Optional inputs: 2 digital inputs for window and occupancy
Stand-alone operation: No
Bus system description: Room bus IRC
Power supply: 24Vac
Setpoint knob: -...+C


Built in room temperature sensor: no
Model: 450 mA outputs


R7455B1018

Honeywell Unit control module, IRC, R7455

Temperature control module, with control point adjustment.
For sequence control of heating and cooling in convectors and induction units.
Heating output signal: triac (24 Vac, 50/450 mA) configurable for 2-pt, 3-pt, PWM or single/multistage control
Cooling output signal: triac (24 Vac, 50/450 mA) for 3-pt control
Control functions: heat only, cool only, heat and cool in sequence, zero energy band
Modes of operation: occupied, standby, unoccupied, open window
Obligatory inputs: analogue input for room temperature sensor NTC20k
Optional inputs: 2 digital inputs for window and occupancy
Stand-alone operation: No
Bus system description: Room bus IRC
Power supply: 24Vac
Setpoint knob: -...+C


Built in room temperature sensor: yes
Model: 50 mA outputs


R7456A1001

Honeywell Room temperature controller, IRC, R7456

Temperature control module, with LCD and control point adjustment, suitable for stand-alone control.
For radiators or other heaters.
Heating output signal: triac (24 Vac, 200 mA) for 3-pt control
Control functions: heating
Modes of operation: occupied, standby, unoccupied, open window
Optional inputs: 2 digital inputs for window and occupancy
Stand-alone operation: Yes
Bus system description: Room bus IRC
Including internal clock with week schedule.
Power supply: 24Vac
Setpoint knob: -...+C
Built in room temperature sensor: yes
Built in occupancy extension button: yes


R7457A1000

Honeywell Dual VAV control module, IRC, R7457

For measuring and control of air flow in variabel Air Volume units. Control of 2 dampers.
For air balance control with supply and return air, or mixing boxes. For cooling via airflow and heating.
Heating output signal: triac (24 Vac, 450 mA) configurable for 2-pt, 3-pt, PWM or single/multistage control
Re-heat output signal: for R7457D1004: triac (24 Vac, 450 mA) configurable for 2-pt, 3-pt, PWM or single/multistage control
Damper output signal: 2 x triac (24 Vac, 450 mA) for 3-pt control
Auxiliary output signal: for R7457D1004: 2..10 Vdc, 6 mA max for diffuser control; fan on/off output; light on/off output
Control functions: heat and cool in sequence, zero energy band
Modes of operation: occupied, standby, unoccupied, open window
Obligatory inputs: analogue inputs for room temperature sensor NTC20k with control point adjustment
Optional inputs: 2 digital inputs for window and occupancy
Stand-alone operation: No
Bus system description: Room bus IRC
Power supply: 24Vac


Re-heat output: no
Model: no


R7457D1004

Honeywell Dual VAV control module, IRC, R7457

For measuring and control of air flow in variabel Air Volume units. Control of 2 dampers.
For air balance control with supply and return air, or mixing boxes. For cooling via airflow and heating.
Heating output signal: triac (24 Vac, 450 mA) configurable for 2-pt, 3-pt, PWM or single/multistage control
Re-heat output signal: for R7457D1004: triac (24 Vac, 450 mA) configurable for 2-pt, 3-pt, PWM or single/multistage control
Damper output signal: 2 x triac (24 Vac, 450 mA) for 3-pt control
Auxiliary output signal: for R7457D1004: 2..10 Vdc, 6 mA max for diffuser control; fan on/off output; light on/off output
Control functions: heat and cool in sequence, zero energy band
Modes of operation: occupied, standby, unoccupied, open window
Obligatory inputs: analogue inputs for room temperature sensor NTC20k with control point adjustment
Optional inputs: 2 digital inputs for window and occupancy
Stand-alone operation: No
Bus system description: Room bus IRC
Power supply: 24Vac


Re-heat output: yes
Model: with auxiliary outputs


RD-IQ/K

Honeywell Room Display Units, RD-IQ, RD-IQL

Thermistor space temperature sensors for the measurement of ambient temperature. The Room Display is a temperature sensor and 3 digit display with control and indication of setpoint, and optional control and indication of fan speed and occupancy. There are IQ and IQL versions; the IQ version connects to the IQ controller via its local supervisor (RS232) port, and the IQL version connects to the IQL+ or IQLVAV controller via a digital (TBus) input. Both IQ and IQL versions can either be fitted on a standard pattress or be panel mounted.
Temperature element: NTC10k
Temperature range: 10...40C
Protection class: IP30, NEMA1
Mounting place: internal wall
Single power/signal connection to IQL+s, most IQ2xx, and IQ3
Celsius or Fahrenheit display
Icon indication of fan speed and occupancy states
Digital display of local temperature or setpoint
Adjustments configurable with out of box default
Setpoint device: digital


Override button: no
Fan switch: no
Comments: via IQ supervisor port


RD-IQ/KOS

Honeywell Room Display Units, RD-IQ, RD-IQL

Thermistor space temperature sensors for the measurement of ambient temperature. The Room Display is a temperature sensor and 3 digit display with control and indication of setpoint, and optional control and indication of fan speed and occupancy. There are IQ and IQL versions; the IQ version connects to the IQ controller via its local supervisor (RS232) port, and the IQL version connects to the IQL+ or IQLVAV controller via a digital (TBus) input. Both IQ and IQL versions can either be fitted on a standard pattress or be panel mounted.
Temperature element: NTC10k
Temperature range: 10...40C
Protection class: IP30, NEMA1
Mounting place: internal wall
Single power/signal connection to IQL+s, most IQ2xx, and IQ3
Celsius or Fahrenheit display
Icon indication of fan speed and occupancy states
Digital display of local temperature or setpoint
Adjustments configurable with out of box default
Setpoint device: digital


Override button: digital
Fan switch: no
Comments: via IQ supervisor port


RD-IQ/KOSF

Honeywell Room Display Units, RD-IQ, RD-IQL

Thermistor space temperature sensors for the measurement of ambient temperature. The Room Display is a temperature sensor and 3 digit display with control and indication of setpoint, and optional control and indication of fan speed and occupancy. There are IQ and IQL versions; the IQ version connects to the IQ controller via its local supervisor (RS232) port, and the IQL version connects to the IQL+ or IQLVAV controller via a digital (TBus) input. Both IQ and IQL versions can either be fitted on a standard pattress or be panel mounted.
Temperature element: NTC10k
Temperature range: 10...40C
Protection class: IP30, NEMA1
Mounting place: internal wall
Single power/signal connection to IQL+s, most IQ2xx, and IQ3
Celsius or Fahrenheit display
Icon indication of fan speed and occupancy states
Digital display of local temperature or setpoint
Adjustments configurable with out of box default
Setpoint device: digital


Override button: digital
Fan switch: digital
Comments: via IQ supervisor port


RD-IQL/K

Honeywell Room Display Units, RD-IQ, RD-IQL

Thermistor space temperature sensors for the measurement of ambient temperature. The Room Display is a temperature sensor and 3 digit display with control and indication of setpoint, and optional control and indication of fan speed and occupancy. There are IQ and IQL versions; the IQ version connects to the IQ controller via its local supervisor (RS232) port, and the IQL version connects to the IQL+ or IQLVAV controller via a digital (TBus) input. Both IQ and IQL versions can either be fitted on a standard pattress or be panel mounted.
Temperature element: NTC10k
Temperature range: 10...40C
Protection class: IP30, NEMA1
Mounting place: internal wall
Single power/signal connection to IQL+s, most IQ2xx, and IQ3
Celsius or Fahrenheit display
Icon indication of fan speed and occupancy states
Digital display of local temperature or setpoint
Adjustments configurable with out of box default
Setpoint device: digital


Override button: no
Fan switch: no
Comments: via IQL TBus


RD-IQL/KOS

Honeywell Room Display Units, RD-IQ, RD-IQL

Thermistor space temperature sensors for the measurement of ambient temperature. The Room Display is a temperature sensor and 3 digit display with control and indication of setpoint, and optional control and indication of fan speed and occupancy. There are IQ and IQL versions; the IQ version connects to the IQ controller via its local supervisor (RS232) port, and the IQL version connects to the IQL+ or IQLVAV controller via a digital (TBus) input. Both IQ and IQL versions can either be fitted on a standard pattress or be panel mounted.
Temperature element: NTC10k
Temperature range: 10...40C
Protection class: IP30, NEMA1
Mounting place: internal wall
Single power/signal connection to IQL+s, most IQ2xx, and IQ3
Celsius or Fahrenheit display
Icon indication of fan speed and occupancy states
Digital display of local temperature or setpoint
Adjustments configurable with out of box default
Setpoint device: digital


Override button: digital
Fan switch: no
Comments: via IQL TBus


RD-IQL/KOSF

Honeywell Room Display Units, RD-IQ, RD-IQL

Thermistor space temperature sensors for the measurement of ambient temperature. The Room Display is a temperature sensor and 3 digit display with control and indication of setpoint, and optional control and indication of fan speed and occupancy. There are IQ and IQL versions; the IQ version connects to the IQ controller via its local supervisor (RS232) port, and the IQL version connects to the IQL+ or IQLVAV controller via a digital (TBus) input. Both IQ and IQL versions can either be fitted on a standard pattress or be panel mounted.
Temperature element: NTC10k
Temperature range: 10...40C
Protection class: IP30, NEMA1
Mounting place: internal wall
Single power/signal connection to IQL+s, most IQ2xx, and IQ3
Celsius or Fahrenheit display
Icon indication of fan speed and occupancy states
Digital display of local temperature or setpoint
Adjustments configurable with out of box default
Setpoint device: digital


Override button: digital
Fan switch: digital
Comments: via IQL TBus


RD/SDU - ADAPTOR IQ1XX

Honeywell Bluetooth Adaptor, BLUETOOTH

The Trend Bluetooth Supervisor Port Adaptor enables SET or 916 to interrogate and configure the Trend Building Management System using wireless communication. It is designed to provide a temporary connection for commissioning purposes.The Bluetooth adaptor plugs into an IQs local supervisor port, or a CNC2s RS232 port, and will communicate with any Bluetooth enabled laptop or handheld computer. Additional adaptor cables are available for use with older IQs or CNC2s.
Simple wireless connectivity
Walk around commissioning
Enables PCs with only a USB port to be used for commissioning (via USB/Bluetooth adaptor)
No separate power supply required (powered from IQ with correct adaptor cable)

Adaptor Cables
Model: Adaptor cable to IQ1xx series supervisor port


RD/SDU - ADAPTOR IQ1XX+

Honeywell Bluetooth Adaptor, BLUETOOTH

The Trend Bluetooth Supervisor Port Adaptor enables SET or 916 to interrogate and configure the Trend Building Management System using wireless communication. It is designed to provide a temporary connection for commissioning purposes.The Bluetooth adaptor plugs into an IQs local supervisor port, or a CNC2s RS232 port, and will communicate with any Bluetooth enabled laptop or handheld computer. Additional adaptor cables are available for use with older IQs or CNC2s.
Simple wireless connectivity
Walk around commissioning
Enables PCs with only a USB port to be used for commissioning (via USB/Bluetooth adaptor)
No separate power supply required (powered from IQ with correct adaptor cable)

Adaptor Cables
Model: Adaptor cable to IQ1xx+ series supervisor port


RD/SDU - ADAPTOR IQ2XX

Honeywell Bluetooth Adaptor, BLUETOOTH

The Trend Bluetooth Supervisor Port Adaptor enables SET or 916 to interrogate and configure the Trend Building Management System using wireless communication. It is designed to provide a temporary connection for commissioning purposes.The Bluetooth adaptor plugs into an IQs local supervisor port, or a CNC2s RS232 port, and will communicate with any Bluetooth enabled laptop or handheld computer. Additional adaptor cables are available for use with older IQs or CNC2s.
Simple wireless connectivity
Walk around commissioning
Enables PCs with only a USB port to be used for commissioning (via USB/Bluetooth adaptor)
No separate power supply required (powered from IQ with correct adaptor cable)

Adaptor Cables
Model: Adaptor cable to early IQ2xx series supervisor port


RD/SDU - IQ2 COMMS CABLE 10M

Honeywell Room Display Units, RD-IQ, RD-IQL
Accessories

IQ3xcite or IQ4 comms cable - 10m



RD/SDU - IQ2 COMMS CABLE 3M

Honeywell Room Display Units, RD-IQ, RD-IQL
Accessories

IQ3xcite or IQ4 comms cable - 3m



REF/241

Honeywell Manuals and Reference Cards, MAN REF

Reference Cards
Product description: IQ241 Controller


REF/ALARM

Honeywell Manuals and Reference Cards, MAN REF

Reference Cards
Product description: Alarm Spotters Guide


REF/BIND

Honeywell Manuals and Reference Cards, MAN REF
Accessories

Trend Binder for reference cards (empty)



REF/IQAA

Honeywell Manuals and Reference Cards, MAN REF

Reference Cards
Product description: IQ Analogue Arrays


REF/IQCC

Honeywell Manuals and Reference Cards, MAN REF

Reference Cards
Product description: IQ Controller Configuration


REF/IQL

Honeywell Manuals and Reference Cards, MAN REF

Reference Cards
Product description: IQL Controllers


REF/SCALE

Honeywell Manuals and Reference Cards, MAN REF

Reference Cards
Product description: Trend Sensor Scaling


REF/SYMB

Honeywell Manuals and Reference Cards, MAN REF

Reference Cards
Product description: Trend Strategy Symbols


REF/TEXT + ATTRIBUTE

Honeywell Manuals and Reference Cards, MAN REF

Reference Cards
Product description: Text and Attribute Communications


REL2

Honeywell Goldcontact relays, REL

Relay with contact material hard silver and gold plating.
For switching of low voltages.
Mounting: including socket for screw connection or DIN rail
Switch function/capacity: 3 x SPDT contacts, minimum load 10VA/24Vdc; maximum load 6A/250Vac


Model: 230V; 50Hz


REL3

Honeywell Goldcontact relays, REL

Relay with contact material hard silver and gold plating.
For switching of low voltages.
Mounting: including socket for screw connection or DIN rail
Switch function/capacity: 3 x SPDT contacts, minimum load 10VA/24Vdc; maximum load 6A/250Vac


Model: 24V; 50Hz


RF20

Honeywell Additional products for MCR200 controllers

Sensor
Product description: NTC room sensor


RF21

Honeywell Room temperature sensor for Industrial, HVAC (RF)

The temperature sensors are designed for universal use in systems of machine construction, process control, HVAC, environmental and agricultural area.
Protection class: IP65
Temperature range: -50...90C
Mounting place: inside unit


Temperature element: Pt100


RF31

Honeywell Room temperature sensor for Industrial, HVAC (RF)

The temperature sensors are designed for universal use in systems of machine construction, process control, HVAC, environmental and agricultural area.
Protection class: IP65
Temperature range: -50...90C
Mounting place: inside unit


Temperature element: Pt1000


RIN-APU24-2

Honeywell XC5010C and XC6010 plug-in modules, XP502 XF521A, XF522A, XF523A, XF524A, XF525A, XF527, XF529

Power supply
Product description: Uninterrupted power supply, to be used in addition to XP502


RJ1P23V50E

Honeywell Thyristor Controllers, RJ1P RN2F

Thyristor Controllers (solid state relays) provide a means of varying the voltage for electrically resistive loads, typically electric heating elements.The RN controllers are not suitable for switching lamps due to light flicker.
Control input :0 to 10 Vdc, 0.1 mA at 10 Vdc
Control supply:
RJ :20 to 28 Vac/dc; 18 mA at 24 Vdc, 23 mA at 24 Vac
RN :12 to 32 Vdc or 21 to 27 Vac; 30 mA at 32 Vdc or 27 Vac
Current ratings:
depend on ambient temperature, nominal 30, 50 A ratings are at 25 oC (RJ), 30 oC (RN) ambient.
Voltage ratings:
230 V :90 to 265 Vac (RJ), 85 to 265 Vac (RN)
480 V :200 to 550 Vac (RJ), 190 to 530 Vac (RN)
* RJ controllers have 5 operating modes (Phase Angle, Distributed Full Cycle and Burst Control, at 1, 3, and 10 s), whereas RN controllers use a Full Cycle fixed operating mode.


Product description: 1pole 230 Vac 50 A thyristor controller


RJ1P48V50E

Honeywell Thyristor Controllers, RJ1P RN2F

Thyristor Controllers (solid state relays) provide a means of varying the voltage for electrically resistive loads, typically electric heating elements.The RN controllers are not suitable for switching lamps due to light flicker.
Control input :0 to 10 Vdc, 0.1 mA at 10 Vdc
Control supply:
RJ :20 to 28 Vac/dc; 18 mA at 24 Vdc, 23 mA at 24 Vac
RN :12 to 32 Vdc or 21 to 27 Vac; 30 mA at 32 Vdc or 27 Vac
Current ratings:
depend on ambient temperature, nominal 30, 50 A ratings are at 25 oC (RJ), 30 oC (RN) ambient.
Voltage ratings:
230 V :90 to 265 Vac (RJ), 85 to 265 Vac (RN)
480 V :200 to 550 Vac (RJ), 190 to 530 Vac (RN)
* RJ controllers have 5 operating modes (Phase Angle, Distributed Full Cycle and Burst Control, at 1, 3, and 10 s), whereas RN controllers use a Full Cycle fixed operating mode.


Product description: 1pole 480 Vac 50 A thyristor controller


RN1L40M25

Honeywell Control ouput module for hydronic installations, IRC, R7452A R7452B R7452C


Solid state relay (current valve) for control of electrical heaters.For inductive and ohmic loads up to 25A; DIN rail mounting. Equipped with integrated heatsink and over-voltage protection.



RN2F48V30

Honeywell Thyristor Controllers, RJ1P RN2F

Thyristor Controllers (solid state relays) provide a means of varying the voltage for electrically resistive loads, typically electric heating elements.The RN controllers are not suitable for switching lamps due to light flicker.
Control input :0 to 10 Vdc, 0.1 mA at 10 Vdc
Control supply:
RJ :20 to 28 Vac/dc; 18 mA at 24 Vdc, 23 mA at 24 Vac
RN :12 to 32 Vdc or 21 to 27 Vac; 30 mA at 32 Vdc or 27 Vac
Current ratings:
depend on ambient temperature, nominal 30, 50 A ratings are at 25 oC (RJ), 30 oC (RN) ambient.
Voltage ratings:
230 V :90 to 265 Vac (RJ), 85 to 265 Vac (RN)
480 V :200 to 550 Vac (RJ), 190 to 530 Vac (RN)
* RJ controllers have 5 operating modes (Phase Angle, Distributed Full Cycle and Burst Control, at 1, 3, and 10 s), whereas RN controllers use a Full Cycle fixed operating mode.


Product description: 2pole 480 Vac 30 A (15 A per pole) thyristor controller


RN2F48V50

Honeywell Thyristor Controllers, RJ1P RN2F

Thyristor Controllers (solid state relays) provide a means of varying the voltage for electrically resistive loads, typically electric heating elements.The RN controllers are not suitable for switching lamps due to light flicker.
Control input :0 to 10 Vdc, 0.1 mA at 10 Vdc
Control supply:
RJ :20 to 28 Vac/dc; 18 mA at 24 Vdc, 23 mA at 24 Vac
RN :12 to 32 Vdc or 21 to 27 Vac; 30 mA at 32 Vdc or 27 Vac
Current ratings:
depend on ambient temperature, nominal 30, 50 A ratings are at 25 oC (RJ), 30 oC (RN) ambient.
Voltage ratings:
230 V :90 to 265 Vac (RJ), 85 to 265 Vac (RN)
480 V :200 to 550 Vac (RJ), 190 to 530 Vac (RN)
* RJ controllers have 5 operating modes (Phase Angle, Distributed Full Cycle and Burst Control, at 1, 3, and 10 s), whereas RN controllers use a Full Cycle fixed operating mode.


Product description: 2pole 480 Vac 50 A (25 A per pole) thyristor controller


RP416A2008

Honeywell Electric-pneumatic relay, RP416A

Relay to switch with an electric voltage the supply air pressure to one or the other output port
Input signal: 230 Vac, 9/7 VA ; supply air pressure on port 1
Output signal: air pressure on port 2 or 3
Pressure connection: for 6 x 1 mm or 1/4" PE hose
Mounting: DIN rail or wall
Air capacity 55 Nl/h.
Max. pressure: 800kPa
Media temp.: -10...40C


RP471A1002

Honeywell Pneumatic snap action relay, RP471

The four port, snap acting relay converts a proportional air pressure change from a controller to a positive (two-position) pressure change. It can also divert a supply line to one of two branches.
Branch Line Pressure range: 0...125kPa
Max. safe air pressure: 205kPa
Air connection: barb for 5/32" or 4 mm O.D. plastic tubing
Mounting: panel; wall
Model: Pneumatic, four-port, snap acting relay; setpoint 4..17 psi, diff. 2 psi
Includes: 14003030-001 1 1/2 in. Mounting Clip for Mounting relay to wall or panel, 1/4" (6 mm) and 5/32" (4 mm) plastic tubing, connectors, compression adapters


RP920B1007

Honeywell Pneumatic Sensor Controller System, RP920B, RP920D

This comprises a series of dedicated sensors measuring temperature and humidity and transmitting an industry-standard 0.2 to 1 bar (3-15 psi) signal to controllers. The controllers are available with proportional and proportional plus integral control outputs with or without reset and remote control point adjustment (CPA). These outputs are used to control air conditioning and heating plants. Direct indication of the controlled variable can be provided by a gauge calibrated to match the output of the sensor installed in the tubing of any convenient point.
The RP920 Pneumatic Controllers provide proportional or proportional+integral control of temperature, humidity/or pressure in heating and air conditioning systems depending upon the controller/sensor combination. The construction is of modular design using modern plastic technology providing a high degree of accuracy and reliability, whilst the compact size and rail mounting saves panel space. Compensation and a remote set point facility are available, with either proportional or proportional plus integral output. Gauges can be fitted to indicate the sensor readings and the output pressure. The control output can be selected as either direct or reverse acting to suit the application. The set point scale is 0 to 100% on set point knob. Separate scales for available sensors supplied with controller. Authority is 20 to 300% of main sensor span. Compensation start point is 0 to 100% of compensation sensor span. Integral reset time is 0.5 to 20 min. Proportional Band is 2.5 to 45% of main sensor span.
Max. safe air pressure: 2bar
Ambient temperature: 5...55C
Air connection: Dual barbs to fit either 6 x 1mm (1/4" OD) or 4 x 0.75mm(5/32" OD) PE tubing. Gauge connection 1/8" NPT.
Supply air pressure: 1.25bar


Model: Proportional controller with reset and CPA


RP920D1003

Honeywell Pneumatic Sensor Controller System, RP920B, RP920D

This comprises a series of dedicated sensors measuring temperature and humidity and transmitting an industry-standard 0.2 to 1 bar (3-15 psi) signal to controllers. The controllers are available with proportional and proportional plus integral control outputs with or without reset and remote control point adjustment (CPA). These outputs are used to control air conditioning and heating plants. Direct indication of the controlled variable can be provided by a gauge calibrated to match the output of the sensor installed in the tubing of any convenient point.
The RP920 Pneumatic Controllers provide proportional or proportional+integral control of temperature, humidity/or pressure in heating and air conditioning systems depending upon the controller/sensor combination. The construction is of modular design using modern plastic technology providing a high degree of accuracy and reliability, whilst the compact size and rail mounting saves panel space. Compensation and a remote set point facility are available, with either proportional or proportional plus integral output. Gauges can be fitted to indicate the sensor readings and the output pressure. The control output can be selected as either direct or reverse acting to suit the application. The set point scale is 0 to 100% on set point knob. Separate scales for available sensors supplied with controller. Authority is 20 to 300% of main sensor span. Compensation start point is 0 to 100% of compensation sensor span. Integral reset time is 0.5 to 20 min. Proportional Band is 2.5 to 45% of main sensor span.
Max. safe air pressure: 2bar
Ambient temperature: 5...55C
Air connection: Dual barbs to fit either 6 x 1mm (1/4" OD) or 4 x 0.75mm(5/32" OD) PE tubing. Gauge connection 1/8" NPT.
Supply air pressure: 1.25bar


Model: P + I controller with reset and CPA


RP971A1007/U

Honeywell Pneumatic Ratio Relay, RP971

The RP971A produces a modulating pressure output proportional to pilot pressure changes. This four-port non-bleed direct-acting relay is used to control valves or dampers in sequence from a single pressure input.
Ratio relay. Startpoint adjustable. For RP971A1007 input span 21 kPa and RP9712A1015 input span 34 kPa
Branch Line Pressure range: 0...124kPa
Max. safe air pressure: 205kPa
Air connection: barb for 5/32" or 4 mm O.D. plastic tubing
Model: Operating Range 0 to 124 kPa


RP971A1015

Honeywell Pneumatic Ratio Relay, RP971

The RP971A produces a modulating pressure output proportional to pilot pressure changes. This four-port non-bleed direct-acting relay is used to control valves or dampers in sequence from a single pressure input.
Ratio relay. Startpoint adjustable. For RP971A1007 input span 21 kPa and RP9712A1015 input span 34 kPa
Branch Line Pressure range: 0...124kPa
Max. safe air pressure: 205kPa
Air connection: barb for 5/32" or 4 mm O.D. plastic tubing
Model: Operating Range 0 to 124 kPa


RS10

Honeywell Main, outside compensated temperature controller heating/burner/DHWS, RS10

Analogue controller including actuator for rotary valves.
Applications:
RS10: controller for 1 heating circuit, 1 mixed DHWS and 1-stage burner
Hardware outputs: relays + rotary valve actuation
Modes of operation: heating without time program, eco, manu, auto
Applicable sensor types: NTC20 kohm
Time program: daily, weekly analogue clock included
Stand-alone operation: yes
Materials: ABS, UL approved
Protection class: IP50
Type of terminals: screw terminals
Mounting: on the rotary valve
Rotary valve actuator with manual operation hand lever, runtime 2,5 min. 90o. For rotary valves ZR, DR, DRG, DRU and DRR up to DN40 (max. 10 Nm). For usage with DRK and ZRK mixing valves an additional adapterset is necessary.
Number of heating circuits: 1
Burner output: 1 stage
Heating/Ventilation application: heating
Setpoint device: with wall modules
Power supply: 230Vac
Housing (HxWxD): 130mm|187mm|93mm
Max. ambient temperature: 45C
Control functions: main temperature-, outside air compensation-, burner-, DHWS control
Hardware inputs: 5 universal
Control output signal: 3 relays


S2

Honeywell Strap-on thermostat for floor heating systems (TKM)
Accessories

Cover for outdoor application



S4390A1004

Honeywell Electronic room controller 24Vac 1 x 3-position modulating output, T8392
Accessories

External pipe mounted thermostat for automatic heat/cool changeover operation



S7001A1008

Honeywell Conversion module 2..10V to 2 x 2..10 V for sequence control, S7001A1008 S7001A1024

Sequence control ouput module, with one input for a signal 2..10 Vdc from a controller.
For proportional control of heater and cooler. Both outputs direct or reverse acting. With zero energy band.
Input signal: 1 x 2..10 Vdc
Output signal: 2 x 2..10 Vdc (+ switch contacts 24 Vdc 50 mA)
Mounting: unit mounting
Power supply: 24Vac


Model: 2 outputs 2..10Vdc


S7001A1024

Honeywell Conversion module 2..10V to 2 x 2..10 V for sequence control, S7001A1008 S7001A1024

Sequence control ouput module, with one input for a signal 2..10 Vdc from a controller.
For proportional control of heater and cooler. Both outputs direct or reverse acting. With zero energy band.
Input signal: 1 x 2..10 Vdc
Output signal: 2 x 2..10 Vdc (+ switch contacts 24 Vdc 50 mA)
Mounting: unit mounting
Power supply: 24Vac


Model: 2 outputs 2..10Vdc + 2 x on/off for cooling


S7014A1004

Honeywell Remote setpoint adjustment unit for IRC or XL10, S7014

Remote setpoint adjustment unit.
Mounting: fancoil unit
Protection class: IP30
Setpoint knob: -...+C
Cable length: 2m
Housing (HxWxD): 75mm|70mm|22mm


Wiring terminals: 2
Fan switch: no
Model: for XL IRC


S7014B1000

Honeywell Remote setpoint adjustment unit for IRC or XL10, S7014

Remote setpoint adjustment unit.
Mounting: fancoil unit
Protection class: IP30
Setpoint knob: -...+C
Cable length: 2m
Housing (HxWxD): 75mm|70mm|22mm


Wiring terminals: 3
Fan switch: auto/off/1/2/3
Model: for XL IRC


S7014C1009

Honeywell Remote setpoint adjustment unit for IRC or XL10, S7014

Remote setpoint adjustment unit.
Mounting: fancoil unit
Protection class: IP30
Setpoint knob: -...+C
Cable length: 2m
Housing (HxWxD): 75mm|70mm|22mm


Wiring terminals: 3
Fan switch: auto/off/1/2/3
Model: for XL10


SAF25

Honeywell Solar sensor

Sensor to register solar radiation. Including two sensing elements.
Protection class: IP30
To be connected to a 10Vdc output from a controller as power supply. The solar output signal (0..5Vdc = 0..500 W/m2) must be connected to an analogue input of the controller.
Mounting place: wall outside
Housing (HxWxD): 120mm|60mm|50mm
Wiring terminals: 3


SCCI

Honeywell IQ241 Controller accessories

The IQ241 controller was replaced by the IQ4 range but the IQ241 S card (channel configuration cards) remain available to facilitate modification and expansion of installed systems.

I/O Cards
AI: 2
DI: no
AO: no
Comments: current


SCDI

Honeywell IQ241 Controller accessories

The IQ241 controller was replaced by the IQ4 range but the IQ241 S card (channel configuration cards) remain available to facilitate modification and expansion of installed systems.

I/O Cards
AI: no
DI: 2
AO: no
Comments: digital


SCTI

Honeywell IQ241 Controller accessories

The IQ241 controller was replaced by the IQ4 range but the IQ241 S card (channel configuration cards) remain available to facilitate modification and expansion of installed systems.

I/O Cards
AI: 2
DI: no
AO: no
Comments: thermistor


SCVI

Honeywell IQ241 Controller accessories

The IQ241 controller was replaced by the IQ4 range but the IQ241 S card (channel configuration cards) remain available to facilitate modification and expansion of installed systems.

I/O Cards
AI: 2
DI: no
AO: no
Comments: voltage


SCVO

Honeywell IQ241 Controller accessories

The IQ241 controller was replaced by the IQ4 range but the IQ241 S card (channel configuration cards) remain available to facilitate modification and expansion of installed systems.

I/O Cards
AI: no
DI: no
AO: 2
Comments: voltage


SDU DOWNLOAD ADAPTOR

Honeywell Smart Display Unit, SDU
Accessories

Adaptor from IQ2xx or IQ3xx local PC lead (CABLE/E104029) to SDU for programming modes of operation



SDU-IQ

Honeywell Smart Display Unit, SDU

The Smart Display Unit (SDU) enables the user to view and adjust selected controller parameters within the controller. It provides all the facilities necessary for the operation of a stand-alone building control system. It is a 4 line by 20 character display panel for mounting on a standard pattress. The IQ and Xcite versions connect directly to the controller local supervisor port. The SDU can only access information in the connected controller. All the adjustments from the SDU can be PIN protected using the controllers built-in security system. The accessible display pages can be selected by setting the SDU mode Unrestricted, Display and Directory mode etc.).
Electro-luminescent 4 x 20 character display
4 illuminated buttons for selection and adjustment
Allows viewing and adjustment of plant parameters, and occupation times
Xcite, IQ, and IQL versions (-xcite, -IQ, -LON)
Programmable SDU mode specifies accessible parameters
Single IQ connection for signal and power (IQ3xcite, IQ2xx)
Programmable SDU text language
Provides time zone for IQL
IQL real time clock with daylight saving
Compatible with all IQLs, IQ3xcites, and IQ2xxs (excluding IQ250)


Model: For IQ2xx except IQ250


SDU-LON

Honeywell Smart Display Unit, SDU-LON

The Smart Display Unit (SDU) enables the user to view and adjust selected controller parameters within the IQL controller. It provides all the facilities necessary for the operation of a stand-alone building control system. It is a 4 line by 20 character display panel for mounting on a standard pattress. The Lon version connects to Lon and is associated with an IQL controller; the SDU can only access information in the connected controller. All the adjustments from the SDU can be PIN protected using the controllers built-in security system. The accessible display pages can be selected by setting the SDU mode Unrestricted, Display and Directory mode etc.).
Electro-luminescent 4 x 20 character display
4 illuminated buttons for selection and adjustment
Allows viewing and adjustment of plant parameters, and occupation times
Programmable SDU mode specifies accessible parameters
Programmable SDU text language
Provides time zone for IQL
IQL real time clock with daylight saving
Compatible with all IQLs
Model: For all IQLs


SDU-XCITE

Honeywell Smart Display Unit, SDU

The Smart Display Unit (SDU) enables the user to view and adjust selected controller parameters within the controller. It provides all the facilities necessary for the operation of a stand-alone building control system. It is a 4 line by 20 character display panel for mounting on a standard pattress. The IQ and Xcite versions connect directly to the controller local supervisor port. The SDU can only access information in the connected controller. All the adjustments from the SDU can be PIN protected using the controllers built-in security system. The accessible display pages can be selected by setting the SDU mode Unrestricted, Display and Directory mode etc.).
Electro-luminescent 4 x 20 character display
4 illuminated buttons for selection and adjustment
Allows viewing and adjustment of plant parameters, and occupation times
Xcite, IQ, and IQL versions (-xcite, -IQ, -LON)
Programmable SDU mode specifies accessible parameters
Single IQ connection for signal and power (IQ3xcite, IQ2xx)
Programmable SDU text language
Provides time zone for IQL
IQL real time clock with daylight saving
Compatible with all IQLs, IQ3xcites, and IQ2xxs (excluding IQ250)


Model: For IQ3xcite and IQ3xact


SK10

Honeywell Differential pressure transmitter for air, SK, SKV, SK -AK, SKV -AK

Differential pressure transmitter for air-conditioning/ventilation.
For filter monitoring, flow control, max. pressure control of gaseous media.
Kind of pressure: differential pressure, relative
Pressure connection: plastic fitting for hose 5 mm internal
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Media temp.: -10...70C
Medium: gaseous
Ambient temperature: 0...50C
Power supply: 18..30Vac, 16..32Vdc
Accessories delivered with the sensor are: joining pipe with extensions, 2 m silicon hose, mounting brackets and screws. The SK-types have jumpersettings for 4 selectable pressure measurement ranges.
Max. pressure: 20kPa
Output signal: 0..10Vdc

Without LED-display
Pressure range: 0...1000Pa


SK10-AK

Honeywell Differential pressure transmitter for air, SK, SKV, SK -AK, SKV -AK

Differential pressure transmitter for air-conditioning/ventilation.
For filter monitoring, flow control, max. pressure control of gaseous media.
Kind of pressure: differential pressure, relative
Pressure connection: plastic fitting for hose 5 mm internal
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Media temp.: -10...70C
Medium: gaseous
Ambient temperature: 0...50C
Power supply: 18..30Vac, 16..32Vdc
Accessories delivered with the sensor are: joining pipe with extensions, 2 m silicon hose, mounting brackets and screws. The SK-types have jumpersettings for 4 selectable pressure measurement ranges.
Max. pressure: 20kPa
Output signal: 0..10Vdc

With LED-display
Pressure range: 0...1000Pa


SK20

Honeywell Differential pressure transmitter for air, SK, SKV, SK -AK, SKV -AK

Differential pressure transmitter for air-conditioning/ventilation.
For filter monitoring, flow control, max. pressure control of gaseous media.
Kind of pressure: differential pressure, relative
Pressure connection: plastic fitting for hose 5 mm internal
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Media temp.: -10...70C
Medium: gaseous
Ambient temperature: 0...50C
Power supply: 18..30Vac, 16..32Vdc
Accessories delivered with the sensor are: joining pipe with extensions, 2 m silicon hose, mounting brackets and screws. The SK-types have jumpersettings for 4 selectable pressure measurement ranges.
Max. pressure: 20kPa
Output signal: 0..10Vdc

Without LED-display
Pressure range: 0...2000Pa


SK20-AK

Honeywell Differential pressure transmitter for air, SK, SKV, SK -AK, SKV -AK

Differential pressure transmitter for air-conditioning/ventilation.
For filter monitoring, flow control, max. pressure control of gaseous media.
Kind of pressure: differential pressure, relative
Pressure connection: plastic fitting for hose 5 mm internal
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Media temp.: -10...70C
Medium: gaseous
Ambient temperature: 0...50C
Power supply: 18..30Vac, 16..32Vdc
Accessories delivered with the sensor are: joining pipe with extensions, 2 m silicon hose, mounting brackets and screws. The SK-types have jumpersettings for 4 selectable pressure measurement ranges.
Max. pressure: 20kPa
Output signal: 0..10Vdc

With LED-display
Pressure range: 0...2000Pa


SK5

Honeywell Differential pressure transmitter for air, SK, SKV, SK -AK, SKV -AK

Differential pressure transmitter for air-conditioning/ventilation.
For filter monitoring, flow control, max. pressure control of gaseous media.
Kind of pressure: differential pressure, relative
Pressure connection: plastic fitting for hose 5 mm internal
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Media temp.: -10...70C
Medium: gaseous
Ambient temperature: 0...50C
Power supply: 18..30Vac, 16..32Vdc
Accessories delivered with the sensor are: joining pipe with extensions, 2 m silicon hose, mounting brackets and screws. The SK-types have jumpersettings for 4 selectable pressure measurement ranges.
Max. pressure: 20kPa
Output signal: 0..10Vdc

Without LED-display
Pressure range: 0...500Pa


SK5-AK

Honeywell Differential pressure transmitter for air, SK, SKV, SK -AK, SKV -AK

Differential pressure transmitter for air-conditioning/ventilation.
For filter monitoring, flow control, max. pressure control of gaseous media.
Kind of pressure: differential pressure, relative
Pressure connection: plastic fitting for hose 5 mm internal
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Media temp.: -10...70C
Medium: gaseous
Ambient temperature: 0...50C
Power supply: 18..30Vac, 16..32Vdc
Accessories delivered with the sensor are: joining pipe with extensions, 2 m silicon hose, mounting brackets and screws. The SK-types have jumpersettings for 4 selectable pressure measurement ranges.
Max. pressure: 20kPa
Output signal: 0..10Vdc

With LED-display
Pressure range: 0...500Pa


SKN1250-L

Honeywell Differential/over- pressure transmitter for non-aggressive gases, LON, SKN -L, SKVN -L

Differential/over- pressure transmitter with LON connection.
For pressure control of gaseous media, for air conditioning or ventilation.
Kind of pressure: differential pressure, relative
Pressure connection: 4,8 mm diameter
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Media temp.: -10...70C
Medium: gaseous
Ambient temperature: -10...70C
Power supply: 19..29Vac, 24..36Vdc
Output signal: LON
LonMark(R) profile: pressure profile 1030
Transceiver type: FTT 10A
LON service and operation LED visible without disassembly. Mounting bracket H11 included.

Over pressure sensor
Pressure range: 0...1250Pa
Max. pressure: 15kPa


SKN250-L

Honeywell Differential/over- pressure transmitter for non-aggressive gases, LON, SKN -L, SKVN -L

Differential/over- pressure transmitter with LON connection.
For pressure control of gaseous media, for air conditioning or ventilation.
Kind of pressure: differential pressure, relative
Pressure connection: 4,8 mm diameter
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Media temp.: -10...70C
Medium: gaseous
Ambient temperature: -10...70C
Power supply: 19..29Vac, 24..36Vdc
Output signal: LON
LonMark(R) profile: pressure profile 1030
Transceiver type: FTT 10A
LON service and operation LED visible without disassembly. Mounting bracket H11 included.

Over pressure sensor
Pressure range: 0...250Pa
Max. pressure: 10kPa


SKV10

Honeywell Differential pressure transmitter for air, SK, SKV, SK -AK, SKV -AK

Differential pressure transmitter for air-conditioning/ventilation.
For filter monitoring, flow control, max. pressure control of gaseous media.
Kind of pressure: differential pressure, relative
Pressure connection: plastic fitting for hose 5 mm internal
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Media temp.: -10...70C
Medium: gaseous
Ambient temperature: 0...50C
Power supply: 18..30Vac, 16..32Vdc
Accessories delivered with the sensor are: joining pipe with extensions, 2 m silicon hose, mounting brackets and screws. The SK-types have jumpersettings for 4 selectable pressure measurement ranges.
Max. pressure: 20kPa
Output signal: 0..10Vdc

Without LED-display
Pressure range: -1000...1000Pa


SKV10-AK

Honeywell Differential pressure transmitter for air, SK, SKV, SK -AK, SKV -AK

Differential pressure transmitter for air-conditioning/ventilation.
For filter monitoring, flow control, max. pressure control of gaseous media.
Kind of pressure: differential pressure, relative
Pressure connection: plastic fitting for hose 5 mm internal
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Media temp.: -10...70C
Medium: gaseous
Ambient temperature: 0...50C
Power supply: 18..30Vac, 16..32Vdc
Accessories delivered with the sensor are: joining pipe with extensions, 2 m silicon hose, mounting brackets and screws. The SK-types have jumpersettings for 4 selectable pressure measurement ranges.
Max. pressure: 20kPa
Output signal: 0..10Vdc

With LED-display
Pressure range: -1000...1000Pa


SKV5

Honeywell Differential pressure transmitter for air, SK, SKV, SK -AK, SKV -AK

Differential pressure transmitter for air-conditioning/ventilation.
For filter monitoring, flow control, max. pressure control of gaseous media.
Kind of pressure: differential pressure, relative
Pressure connection: plastic fitting for hose 5 mm internal
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Media temp.: -10...70C
Medium: gaseous
Ambient temperature: 0...50C
Power supply: 18..30Vac, 16..32Vdc
Accessories delivered with the sensor are: joining pipe with extensions, 2 m silicon hose, mounting brackets and screws. The SK-types have jumpersettings for 4 selectable pressure measurement ranges.
Max. pressure: 20kPa
Output signal: 0..10Vdc

Without LED-display
Pressure range: -500...500Pa


SKV5-AK

Honeywell Differential pressure transmitter for air, SK, SKV, SK -AK, SKV -AK

Differential pressure transmitter for air-conditioning/ventilation.
For filter monitoring, flow control, max. pressure control of gaseous media.
Kind of pressure: differential pressure, relative
Pressure connection: plastic fitting for hose 5 mm internal
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Media temp.: -10...70C
Medium: gaseous
Ambient temperature: 0...50C
Power supply: 18..30Vac, 16..32Vdc
Accessories delivered with the sensor are: joining pipe with extensions, 2 m silicon hose, mounting brackets and screws. The SK-types have jumpersettings for 4 selectable pressure measurement ranges.
Max. pressure: 20kPa
Output signal: 0..10Vdc

With LED-display
Pressure range: -500...500Pa


SKVN1250-L

Honeywell Differential/over- pressure transmitter for non-aggressive gases, LON, SKN -L, SKVN -L

Differential/over- pressure transmitter with LON connection.
For pressure control of gaseous media, for air conditioning or ventilation.
Kind of pressure: differential pressure, relative
Pressure connection: 4,8 mm diameter
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Media temp.: -10...70C
Medium: gaseous
Ambient temperature: -10...70C
Power supply: 19..29Vac, 24..36Vdc
Output signal: LON
LonMark(R) profile: pressure profile 1030
Transceiver type: FTT 10A
LON service and operation LED visible without disassembly. Mounting bracket H11 included.

Differential pressure sensor
Pressure range: -1250...1250Pa
Max. pressure: 15kPa


SKVN250-L

Honeywell Differential/over- pressure transmitter for non-aggressive gases, LON, SKN -L, SKVN -L

Differential/over- pressure transmitter with LON connection.
For pressure control of gaseous media, for air conditioning or ventilation.
Kind of pressure: differential pressure, relative
Pressure connection: 4,8 mm diameter
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Media temp.: -10...70C
Medium: gaseous
Ambient temperature: -10...70C
Power supply: 19..29Vac, 24..36Vdc
Output signal: LON
LonMark(R) profile: pressure profile 1030
Transceiver type: FTT 10A
LON service and operation LED visible without disassembly. Mounting bracket H11 included.

Differential pressure sensor
Pressure range: -250...250Pa
Max. pressure: 15kPa


SN025-280

Honeywell Pressure transmitter for liquid, gas, 2-wire-system (SN2)

Pressure transmitter, 2-wire system.
For overpressure monitoring of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: external thread G1/2
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Sensing element material: 1.4571 + 1.4435
Media temp.: -30...110C
Medium: liquid/gaseous
Ambient temperature: 0...60C
Power supply: 12..36Vdc
Output signal: 4..20mA


Pressure range: 0...0.25bar
Max. pressure: 0.75bar


SN025-311

Honeywell Pressure transmitter with terminal connection for liquid, gas, 3-wire-system (SN 311)

Pressure transmitter, 3-wire system.
For overpressure monitoring of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: external thread G1/2
Electrical connection: terminal connection 2 x M16x1,5
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Sensing element material: 1.4571 + 1.4435
Media temp.: -30...100C
Medium: liquid/gaseous
Ambient temperature: 0...50C
Power supply: 19..29Vac, 24..36Vdc
Output signal: 0..10Vdc + 0..20mA


Pressure range: 0...0.25bar
Max. pressure: 0.75bar


SN025-355-L

Honeywell Pressure transmitter for liquids and gases, LON, SN 355-L

Pressure transmitter with LON connection.
For pressure control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: G1/2 external
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Sensing element material: 1.4571 + 1.4435
Media temp.: -30...100C
Medium: liquid/gaseous
Ambient temperature: 0...50C
Power supply: 19..29Vac, 24..36Vdc
Output signal: LON
LonMark(R) profile: pressure profile 1030
Transceiver type: FTT 10A
LON service and operation LED visible without disassembly.


Pressure range: 0...0.25bar
Max. pressure: 0.75bar


SN025-395

Honeywell Pressure transmitter with plug connection for liquid, gas, 3-wire-system (SN 395)

Pressure transmitter, 3-wire system.
For overpressure monitoring of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: external thread G1/2
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Sensing element material: 1.4571 + 1.4435
Media temp.: -30...100C
Medium: liquid/gaseous
Ambient temperature: 0...50C
Power supply: 19..29Vac, 24..36Vdc
working range adjustable by jumper
Output signal: 0..10Vdc


Pressure range: 0...0.25bar
Max. pressure: 0.75bar


SN06-280

Honeywell Pressure transmitter for liquid, gas, 2-wire-system (SN2)

Pressure transmitter, 2-wire system.
For overpressure monitoring of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: external thread G1/2
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Sensing element material: 1.4571 + 1.4435
Media temp.: -30...110C
Medium: liquid/gaseous
Ambient temperature: 0...60C
Power supply: 12..36Vdc
Output signal: 4..20mA


Pressure range: 0...0.6bar
Max. pressure: 1.8bar


SN06-311

Honeywell Pressure transmitter with terminal connection for liquid, gas, 3-wire-system (SN 311)

Pressure transmitter, 3-wire system.
For overpressure monitoring of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: external thread G1/2
Electrical connection: terminal connection 2 x M16x1,5
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Sensing element material: 1.4571 + 1.4435
Media temp.: -30...100C
Medium: liquid/gaseous
Ambient temperature: 0...50C
Power supply: 19..29Vac, 24..36Vdc
Output signal: 0..10Vdc + 0..20mA


Pressure range: 0...0.6bar
Max. pressure: 1.8bar


SN06-395

Honeywell Pressure transmitter with plug connection for liquid, gas, 3-wire-system (SN 395)

Pressure transmitter, 3-wire system.
For overpressure monitoring of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: external thread G1/2
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Sensing element material: 1.4571 + 1.4435
Media temp.: -30...100C
Medium: liquid/gaseous
Ambient temperature: 0...50C
Power supply: 19..29Vac, 24..36Vdc
working range adjustable by jumper
Output signal: 0..10Vdc


Pressure range: 0...0.6bar
Max. pressure: 1.8bar


SN1-280

Honeywell Pressure transmitter for liquid, gas, 2-wire-system (SN2)

Pressure transmitter, 2-wire system.
For overpressure monitoring of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: external thread G1/2
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Sensing element material: 1.4571 + 1.4435
Media temp.: -30...110C
Medium: liquid/gaseous
Ambient temperature: 0...60C
Power supply: 12..36Vdc
Output signal: 4..20mA


Pressure range: 0...1bar
Max. pressure: 3bar


SN1-311

Honeywell Pressure transmitter with terminal connection for liquid, gas, 3-wire-system (SN 311)

Pressure transmitter, 3-wire system.
For overpressure monitoring of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: external thread G1/2
Electrical connection: terminal connection 2 x M16x1,5
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Sensing element material: 1.4571 + 1.4435
Media temp.: -30...100C
Medium: liquid/gaseous
Ambient temperature: 0...50C
Power supply: 19..29Vac, 24..36Vdc
Output signal: 0..10Vdc + 0..20mA


Pressure range: 0...1bar
Max. pressure: 3bar


SN1-355-L

Honeywell Pressure transmitter for liquids and gases, LON, SN 355-L

Pressure transmitter with LON connection.
For pressure control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: G1/2 external
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Sensing element material: 1.4571 + 1.4435
Media temp.: -30...100C
Medium: liquid/gaseous
Ambient temperature: 0...50C
Power supply: 19..29Vac, 24..36Vdc
Output signal: LON
LonMark(R) profile: pressure profile 1030
Transceiver type: FTT 10A
LON service and operation LED visible without disassembly.


Pressure range: 0...1bar
Max. pressure: 3bar


SN1-395

Honeywell Pressure transmitter with plug connection for liquid, gas, 3-wire-system (SN 395)

Pressure transmitter, 3-wire system.
For overpressure monitoring of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: external thread G1/2
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Sensing element material: 1.4571 + 1.4435
Media temp.: -30...100C
Medium: liquid/gaseous
Ambient temperature: 0...50C
Power supply: 19..29Vac, 24..36Vdc
working range adjustable by jumper
Output signal: 0..10Vdc


Pressure range: 0...1bar
Max. pressure: 3bar


SN10-280

Honeywell Pressure transmitter for liquid, gas, 2-wire-system (SN2)

Pressure transmitter, 2-wire system.
For overpressure monitoring of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: external thread G1/2
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Sensing element material: 1.4571 + 1.4435
Media temp.: -30...110C
Medium: liquid/gaseous
Ambient temperature: 0...60C
Power supply: 12..36Vdc
Output signal: 4..20mA


Pressure range: 0...10bar
Max. pressure: 30bar


SN10-311

Honeywell Pressure transmitter with terminal connection for liquid, gas, 3-wire-system (SN 311)

Pressure transmitter, 3-wire system.
For overpressure monitoring of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: external thread G1/2
Electrical connection: terminal connection 2 x M16x1,5
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Sensing element material: 1.4571 + 1.4435
Media temp.: -30...100C
Medium: liquid/gaseous
Ambient temperature: 0...50C
Power supply: 19..29Vac, 24..36Vdc
Output signal: 0..10Vdc + 0..20mA


Pressure range: 0...10bar
Max. pressure: 30bar


SN10-355-L

Honeywell Pressure transmitter for liquids and gases, LON, SN 355-L

Pressure transmitter with LON connection.
For pressure control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: G1/2 external
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Sensing element material: 1.4571 + 1.4435
Media temp.: -30...100C
Medium: liquid/gaseous
Ambient temperature: 0...50C
Power supply: 19..29Vac, 24..36Vdc
Output signal: LON
LonMark(R) profile: pressure profile 1030
Transceiver type: FTT 10A
LON service and operation LED visible without disassembly.


Pressure range: 0...10bar
Max. pressure: 30bar


SN10-395

Honeywell Pressure transmitter with plug connection for liquid, gas, 3-wire-system (SN 395)

Pressure transmitter, 3-wire system.
For overpressure monitoring of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: external thread G1/2
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Sensing element material: 1.4571 + 1.4435
Media temp.: -30...100C
Medium: liquid/gaseous
Ambient temperature: 0...50C
Power supply: 19..29Vac, 24..36Vdc
working range adjustable by jumper
Output signal: 0..10Vdc


Pressure range: 0...10bar
Max. pressure: 30bar


SN16-280

Honeywell Pressure transmitter for liquid, gas, 2-wire-system (SN2)

Pressure transmitter, 2-wire system.
For overpressure monitoring of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: external thread G1/2
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Sensing element material: 1.4571 + 1.4435
Media temp.: -30...110C
Medium: liquid/gaseous
Ambient temperature: 0...60C
Power supply: 12..36Vdc
Output signal: 4..20mA


Pressure range: 0...16bar
Max. pressure: 48bar


SN2-280

Honeywell Pressure transmitter for liquid, gas, 2-wire-system (SN2)

Pressure transmitter, 2-wire system.
For overpressure monitoring of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: external thread G1/2
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Sensing element material: 1.4571 + 1.4435
Media temp.: -30...110C
Medium: liquid/gaseous
Ambient temperature: 0...60C
Power supply: 12..36Vdc
Output signal: 4..20mA


Pressure range: 0...1.6bar
Max. pressure: 6.4bar


SN25-280

Honeywell Pressure transmitter for liquid, gas, 2-wire-system (SN2)

Pressure transmitter, 2-wire system.
For overpressure monitoring of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: external thread G1/2
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Sensing element material: 1.4571 + 1.4435
Media temp.: -30...110C
Medium: liquid/gaseous
Ambient temperature: 0...60C
Power supply: 12..36Vdc
Output signal: 4..20mA


Pressure range: 0...25bar
Max. pressure: 70bar


SN25-311

Honeywell Pressure transmitter with terminal connection for liquid, gas, 3-wire-system (SN 311)

Pressure transmitter, 3-wire system.
For overpressure monitoring of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: external thread G1/2
Electrical connection: terminal connection 2 x M16x1,5
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Sensing element material: 1.4571 + 1.4435
Media temp.: -30...100C
Medium: liquid/gaseous
Ambient temperature: 0...50C
Power supply: 19..29Vac, 24..36Vdc
Output signal: 0..10Vdc + 0..20mA


Pressure range: 0...25bar
Max. pressure: 70bar


SN25-355-L

Honeywell Pressure transmitter for liquids and gases, LON, SN 355-L

Pressure transmitter with LON connection.
For pressure control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: G1/2 external
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Sensing element material: 1.4571 + 1.4435
Media temp.: -30...100C
Medium: liquid/gaseous
Ambient temperature: 0...50C
Power supply: 19..29Vac, 24..36Vdc
Output signal: LON
LonMark(R) profile: pressure profile 1030
Transceiver type: FTT 10A
LON service and operation LED visible without disassembly.


Pressure range: 0...25bar
Max. pressure: 70bar


SN25-395

Honeywell Pressure transmitter with plug connection for liquid, gas, 3-wire-system (SN 395)

Pressure transmitter, 3-wire system.
For overpressure monitoring of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: external thread G1/2
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Sensing element material: 1.4571 + 1.4435
Media temp.: -30...100C
Medium: liquid/gaseous
Ambient temperature: 0...50C
Power supply: 19..29Vac, 24..36Vdc
working range adjustable by jumper
Output signal: 0..10Vdc


Pressure range: 0...25bar
Max. pressure: 70bar


SN3-280

Honeywell Pressure transmitter for liquid, gas, 2-wire-system (SN2)

Pressure transmitter, 2-wire system.
For overpressure monitoring of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: external thread G1/2
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Sensing element material: 1.4571 + 1.4435
Media temp.: -30...110C
Medium: liquid/gaseous
Ambient temperature: 0...60C
Power supply: 12..36Vdc
Output signal: 4..20mA


Pressure range: 0...2.5bar
Max. pressure: 7.5bar


SN3-311

Honeywell Pressure transmitter with terminal connection for liquid, gas, 3-wire-system (SN 311)

Pressure transmitter, 3-wire system.
For overpressure monitoring of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: external thread G1/2
Electrical connection: terminal connection 2 x M16x1,5
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Sensing element material: 1.4571 + 1.4435
Media temp.: -30...100C
Medium: liquid/gaseous
Ambient temperature: 0...50C
Power supply: 19..29Vac, 24..36Vdc
Output signal: 0..10Vdc + 0..20mA


Pressure range: 0...2.5bar
Max. pressure: 7.5bar


SN3-355-L

Honeywell Pressure transmitter for liquids and gases, LON, SN 355-L

Pressure transmitter with LON connection.
For pressure control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: G1/2 external
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Sensing element material: 1.4571 + 1.4435
Media temp.: -30...100C
Medium: liquid/gaseous
Ambient temperature: 0...50C
Power supply: 19..29Vac, 24..36Vdc
Output signal: LON
LonMark(R) profile: pressure profile 1030
Transceiver type: FTT 10A
LON service and operation LED visible without disassembly.


Pressure range: 0...2.5bar
Max. pressure: 7.5bar


SN3-395

Honeywell Pressure transmitter with plug connection for liquid, gas, 3-wire-system (SN 395)

Pressure transmitter, 3-wire system.
For overpressure monitoring of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: external thread G1/2
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Sensing element material: 1.4571 + 1.4435
Media temp.: -30...100C
Medium: liquid/gaseous
Ambient temperature: 0...50C
Power supply: 19..29Vac, 24..36Vdc
working range adjustable by jumper
Output signal: 0..10Vdc


Pressure range: 0...2.5bar
Max. pressure: 7.5bar


SN4-280

Honeywell Pressure transmitter for liquid, gas, 2-wire-system (SN2)

Pressure transmitter, 2-wire system.
For overpressure monitoring of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: external thread G1/2
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Sensing element material: 1.4571 + 1.4435
Media temp.: -30...110C
Medium: liquid/gaseous
Ambient temperature: 0...60C
Power supply: 12..36Vdc
Output signal: 4..20mA


Pressure range: 0...4bar
Max. pressure: 16bar


SN40-280

Honeywell Pressure transmitter for liquid, gas, 2-wire-system (SN2)

Pressure transmitter, 2-wire system.
For overpressure monitoring of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: external thread G1/2
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Sensing element material: 1.4571 + 1.4435
Media temp.: -30...110C
Medium: liquid/gaseous
Ambient temperature: 0...60C
Power supply: 12..36Vdc
Output signal: 4..20mA


Pressure range: 0...40bar
Max. pressure: 80bar


SN40-311

Honeywell Pressure transmitter with terminal connection for liquid, gas, 3-wire-system (SN 311)

Pressure transmitter, 3-wire system.
For overpressure monitoring of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: external thread G1/2
Electrical connection: terminal connection 2 x M16x1,5
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Sensing element material: 1.4571 + 1.4435
Media temp.: -30...100C
Medium: liquid/gaseous
Ambient temperature: 0...50C
Power supply: 19..29Vac, 24..36Vdc
Output signal: 0..10Vdc + 0..20mA


Pressure range: 0...40bar
Max. pressure: 80bar


SN40-395

Honeywell Pressure transmitter with plug connection for liquid, gas, 3-wire-system (SN 395)

Pressure transmitter, 3-wire system.
For overpressure monitoring of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: external thread G1/2
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Sensing element material: 1.4571 + 1.4435
Media temp.: -30...100C
Medium: liquid/gaseous
Ambient temperature: 0...50C
Power supply: 19..29Vac, 24..36Vdc
working range adjustable by jumper
Output signal: 0..10Vdc


Pressure range: 0...40bar
Max. pressure: 80bar


SN6-280

Honeywell Pressure transmitter for liquid, gas, 2-wire-system (SN2)

Pressure transmitter, 2-wire system.
For overpressure monitoring of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: external thread G1/2
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Sensing element material: 1.4571 + 1.4435
Media temp.: -30...110C
Medium: liquid/gaseous
Ambient temperature: 0...60C
Power supply: 12..36Vdc
Output signal: 4..20mA


Pressure range: 0...6bar
Max. pressure: 18bar


SN6-311

Honeywell Pressure transmitter with terminal connection for liquid, gas, 3-wire-system (SN 311)

Pressure transmitter, 3-wire system.
For overpressure monitoring of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: external thread G1/2
Electrical connection: terminal connection 2 x M16x1,5
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Sensing element material: 1.4571 + 1.4435
Media temp.: -30...100C
Medium: liquid/gaseous
Ambient temperature: 0...50C
Power supply: 19..29Vac, 24..36Vdc
Output signal: 0..10Vdc + 0..20mA


Pressure range: 0...6bar
Max. pressure: 18bar


SN6-355-L

Honeywell Pressure transmitter for liquids and gases, LON, SN 355-L

Pressure transmitter with LON connection.
For pressure control of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: G1/2 external
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Sensing element material: 1.4571 + 1.4435
Media temp.: -30...100C
Medium: liquid/gaseous
Ambient temperature: 0...50C
Power supply: 19..29Vac, 24..36Vdc
Output signal: LON
LonMark(R) profile: pressure profile 1030
Transceiver type: FTT 10A
LON service and operation LED visible without disassembly.


Pressure range: 0...6bar
Max. pressure: 18bar


SN6-395

Honeywell Pressure transmitter with plug connection for liquid, gas, 3-wire-system (SN 395)

Pressure transmitter, 3-wire system.
For overpressure monitoring of liquids or gaseous media, e.g. for district heating or cooling.
Kind of pressure: overpressure, relative
Pressure connection: external thread G1/2
Electrical connection: Plug DIN EN 175301
Protection class: IP65
Housing material: Macrolon
Sensing method: piezoresistive
Sensing element material: 1.4571 + 1.4435
Media temp.: -30...100C
Medium: liquid/gaseous
Ambient temperature: 0...50C
Power supply: 19..29Vac, 24..36Vdc
working range adjustable by jumper
Output signal: 0..10Vdc


Pressure range: 0...6bar
Max. pressure: 18bar


SP470A1042

Honeywell Pneumatic switches, SP470A SP970A

For manual correction of process control-/manual proportional action switching or minimum positioning in pneumatic control systems.
Max. safe air pressure: 200kPa
Air connection: SP470: sharp barb type slip-on connections for 4 mm (5/32") plastic tubing
SP970: connectors for 4 mm or 5/32" O.D. plastic tubing


Model: 2-position switch
Operating range: 0...150kPa
Ambient temperature: -18...60C


SP470A1059

Honeywell Pneumatic switches, SP470A SP970A

For manual correction of process control-/manual proportional action switching or minimum positioning in pneumatic control systems.
Max. safe air pressure: 200kPa
Air connection: SP470: sharp barb type slip-on connections for 4 mm (5/32") plastic tubing
SP970: connectors for 4 mm or 5/32" O.D. plastic tubing


Model: 3-position switch
Operating range: 0...150kPa
Ambient temperature: -18...60C


SP970A1021

Honeywell Pneumatic switches, SP470A SP970A

For manual correction of process control-/manual proportional action switching or minimum positioning in pneumatic control systems.
Max. safe air pressure: 200kPa
Air connection: SP470: sharp barb type slip-on connections for 4 mm (5/32") plastic tubing
SP970: connectors for 4 mm or 5/32" O.D. plastic tubing


Model: 3 port pneumatic switch, span 70 kPa
Operating range: 0...125kPa
Ambient temperature: 0...50C


SRMV

Honeywell IQ3 Web Enabled Controllers

The IQ3 controllers are Building Management System controllers that use Ethernet and TCP/IP networking technologies. Each controller incorporates a web server which can deliver user-specific web pages to a PC or mobile device running internet browser software. If a system is set up with the correct connections, a user with the appropriate security codes can monitor or adjust the controller from any Internet access point in the world. It is also compatible with the traditional IQ system protocol.
Network: TCP/IP
The following features are also available:
Ethernet 10 Mbps main network with TCP/IP protocol
Embedded web server with security protected monitor/control
Compatible with existing IQ system protocol
Flexible number of software strategy modules
Small footprint with DIN rail mounting

I/O Module, conversion module from AO (0..10V) to DO (relay 240 V 8 A)
UI: no
DI: no
TI: no
AO: no
DO: 1
DOS: no
Power: no


SSP129C112

Honeywell Air duct absolute humidity sensor, SSP129

Dew point temperature sensor for measurement of absolute humidity. Lithium cloride element with heating coil.
Protection class: IP33
Dew point temperature range -40..50 oC.
Temperature element: NTC10k fast
Power supply: 230Vac
Mounting place: air duct
Immersion depth: 105mm
Wiring terminals: 4


SSP129Z004

Honeywell Air duct absolute humidity sensor, SSP129
Accessories

Lithium chloride regeneration set



ST221

Honeywell Solenoid valves for gaseous and liquid medium (GB)
Plug

Device plug with LED-display for voltage 200V - 240 VAC/DC



ST355

Honeywell Differential/over- pressure transmitter for non-aggressive gases, LON, SKN -L, SKVN -L
Accessories

Plug M12 five-pole



STF21-220

Honeywell Fast Temperature Sensor, Industrial/HVAC (STF)

The temperature sensors are designed for universal use in systems of machine construction, process control, HVAC, environmental and agricultural area.
Protection class: IP65
Material: Screw connection: Stainless steel 1.4571, Sensor well: Stainless steel 1.4571, Internal gasket: PTFE
Temperature range: -20...300C
Mounting place: in pipe
Cable length: 2.5m


Temperature element: Pt100
Immersion depth: max. 220mm
Sensing element (dia x L): 4mm|220mm


STF21-75

Honeywell Fast Temperature Sensor, Industrial/HVAC (STF)

The temperature sensors are designed for universal use in systems of machine construction, process control, HVAC, environmental and agricultural area.
Protection class: IP65
Material: Screw connection: Stainless steel 1.4571, Sensor well: Stainless steel 1.4571, Internal gasket: PTFE
Temperature range: -20...300C
Mounting place: in pipe
Cable length: 2.5m


Temperature element: Pt100
Immersion depth: max. 75mm
Sensing element (dia x L): 4mm|75mm


STF31-220

Honeywell Fast Temperature Sensor, Industrial/HVAC (STF)

The temperature sensors are designed for universal use in systems of machine construction, process control, HVAC, environmental and agricultural area.
Protection class: IP65
Material: Screw connection: Stainless steel 1.4571, Sensor well: Stainless steel 1.4571, Internal gasket: PTFE
Temperature range: -20...300C
Mounting place: in pipe
Cable length: 2.5m


Temperature element: Pt1000
Immersion depth: max. 220mm
Sensing element (dia x L): 4mm|220mm


STF31-75

Honeywell Fast Temperature Sensor, Industrial/HVAC (STF)

The temperature sensors are designed for universal use in systems of machine construction, process control, HVAC, environmental and agricultural area.
Protection class: IP65
Material: Screw connection: Stainless steel 1.4571, Sensor well: Stainless steel 1.4571, Internal gasket: PTFE
Temperature range: -20...300C
Mounting place: in pipe
Cable length: 2.5m


Temperature element: Pt1000
Immersion depth: max. 75mm
Sensing element (dia x L): 4mm|75mm


SU53-54

Honeywell Main, outside compensated temperature controller heating/burner/DHWS, RS10
Accessories

Analogue day or week timer for the heating circuit (included with RS10)



SV162X-25-10

Honeywell Short stroke, Valve, PN16, 2-port, SV162X

Pressure balanced control valve.
For small AHUs and re-heaters/re-coolers where cost effectiveness is important; hot water or cold water (max. 50% glycol).
Valve type: 2-way press. bal.
Medium type: water
Materials: body brass, stem stainless steel, plug brass
Action to open: stem down
Stroke: 6.5mm
Media temp.: 2...130C
Nominal pressure: PN16
Port connection: ext. thread flat sealing
Flow char.: linear
Valves are supplied with threaded fittings for externally threaded pipes and adjustment cap.


DN size: 25mm
Connection diameter: G1 1/2inch
Pipe connection: Rp1"
Kvs value: 10
Close off pressure with 300N motor: 1600kPa
Close off pressure with 400N motor: 1600kPa


SV162X-25-6.3

Honeywell Short stroke, Valve, PN16, 2-port, SV162X

Pressure balanced control valve.
For small AHUs and re-heaters/re-coolers where cost effectiveness is important; hot water or cold water (max. 50% glycol).
Valve type: 2-way press. bal.
Medium type: water
Materials: body brass, stem stainless steel, plug brass
Action to open: stem down
Stroke: 6.5mm
Media temp.: 2...130C
Nominal pressure: PN16
Port connection: ext. thread flat sealing
Flow char.: linear
Valves are supplied with threaded fittings for externally threaded pipes and adjustment cap.


DN size: 25mm
Connection diameter: G1 1/2inch
Pipe connection: Rp1"
Kvs value: 6.3
Close off pressure with 300N motor: 1600kPa
Close off pressure with 400N motor: 1600kPa


SV162X-32-16

Honeywell Short stroke, Valve, PN16, 2-port, SV162X

Pressure balanced control valve.
For small AHUs and re-heaters/re-coolers where cost effectiveness is important; hot water or cold water (max. 50% glycol).
Valve type: 2-way press. bal.
Medium type: water
Materials: body brass, stem stainless steel, plug brass
Action to open: stem down
Stroke: 6.5mm
Media temp.: 2...130C
Nominal pressure: PN16
Port connection: ext. thread flat sealing
Flow char.: linear
Valves are supplied with threaded fittings for externally threaded pipes and adjustment cap.


DN size: 32mm
Connection diameter: G2inch
Pipe connection: Rp1 1/4"
Kvs value: 16
Close off pressure with 300N motor: 1200kPa
Close off pressure with 400N motor: 1200kPa


SV162X-40-25

Honeywell Short stroke, Valve, PN16, 2-port, SV162X

Pressure balanced control valve.
For small AHUs and re-heaters/re-coolers where cost effectiveness is important; hot water or cold water (max. 50% glycol).
Valve type: 2-way press. bal.
Medium type: water
Materials: body brass, stem stainless steel, plug brass
Action to open: stem down
Stroke: 6.5mm
Media temp.: 2...130C
Nominal pressure: PN16
Port connection: ext. thread flat sealing
Flow char.: linear
Valves are supplied with threaded fittings for externally threaded pipes and adjustment cap.


DN size: 40mm
Connection diameter: G2 1/4inch
Pipe connection: Rp1 1/2"
Kvs value: 25
Close off pressure with 300N motor: 1000kPa
Close off pressure with 400N motor: 1000kPa


SV163X-25-10

Honeywell Short stroke, Valve, PN16, 3-port, SV163X

Pressure balanced control valve.
For small AHUs and re-heaters/re-coolers where cost effectiveness is important; hot water or cold water (max. 50% glycol).
Valve type: 3-way mixing, press. bal.
Medium type: water
Materials: body brass, stem stainless steel, plug brass
Action to open: stem down
Stroke: 6.5mm
Media temp.: 2...130C
Nominal pressure: PN16
Port connection: ext. thread flat sealing
Flow char.: linear
Valves are supplied with threaded fittings for externally threaded pipes and adjustment cap.


DN size: 25mm
Connection diameter: G1 1/2inch
Pipe connection: Rp1"
Kvs value: 10
Close off pressure with 300N motor: 1600kPa
Close off pressure with 400N motor: 1600kPa


SV163X-25-6.3

Honeywell Short stroke, Valve, PN16, 3-port, SV163X

Pressure balanced control valve.
For small AHUs and re-heaters/re-coolers where cost effectiveness is important; hot water or cold water (max. 50% glycol).
Valve type: 3-way mixing, press. bal.
Medium type: water
Materials: body brass, stem stainless steel, plug brass
Action to open: stem down
Stroke: 6.5mm
Media temp.: 2...130C
Nominal pressure: PN16
Port connection: ext. thread flat sealing
Flow char.: linear
Valves are supplied with threaded fittings for externally threaded pipes and adjustment cap.


DN size: 25mm
Connection diameter: G1 1/2inch
Pipe connection: Rp1"
Kvs value: 6.3
Close off pressure with 300N motor: 1600kPa
Close off pressure with 400N motor: 1600kPa


SV163X-32-16

Honeywell Short stroke, Valve, PN16, 3-port, SV163X

Pressure balanced control valve.
For small AHUs and re-heaters/re-coolers where cost effectiveness is important; hot water or cold water (max. 50% glycol).
Valve type: 3-way mixing, press. bal.
Medium type: water
Materials: body brass, stem stainless steel, plug brass
Action to open: stem down
Stroke: 6.5mm
Media temp.: 2...130C
Nominal pressure: PN16
Port connection: ext. thread flat sealing
Flow char.: linear
Valves are supplied with threaded fittings for externally threaded pipes and adjustment cap.


DN size: 32mm
Connection diameter: G2inch
Pipe connection: Rp1 1/4"
Kvs value: 16
Close off pressure with 300N motor: 1200kPa
Close off pressure with 400N motor: 1200kPa


SV163X-40-25

Honeywell Short stroke, Valve, PN16, 3-port, SV163X

Pressure balanced control valve.
For small AHUs and re-heaters/re-coolers where cost effectiveness is important; hot water or cold water (max. 50% glycol).
Valve type: 3-way mixing, press. bal.
Medium type: water
Materials: body brass, stem stainless steel, plug brass
Action to open: stem down
Stroke: 6.5mm
Media temp.: 2...130C
Nominal pressure: PN16
Port connection: ext. thread flat sealing
Flow char.: linear
Valves are supplied with threaded fittings for externally threaded pipes and adjustment cap.


DN size: 40mm
Connection diameter: G2 1/4inch
Pipe connection: Rp1 1/2"
Kvs value: 25
Close off pressure with 300N motor: 1000kPa
Close off pressure with 400N motor: 1000kPa


SYM-BASE01

Honeywell SymmetrE Building Management Workstation, R410

The SymmetrE building management system redefines what to expect from monitoring and control of your heating, ventilation and air conditioning equipment. The scalable, open SymmetrE system brings your buildings occupant needs, operational issues and budget pressures into perfect balance. You get an unparalleled solution that helps simplify facility management, boost productivity and reduce costs.
SymmetrE delivers an intelligent workstation with the full suite of tools you and your staff need. You can view and control subsystems, access and analyze data, manage equipment maintenance, see Intranet and Internet pages and generate graphs, charts and reports directly from your desktop.
You also benefit from a building management system thats truly open. SymmetrEs unique technology takes full advantage of leading open standards, permitting you to create an integrated system with transparent communications from third-party subsystems directly to SymmetrE.Theres no need for gateways, simplifying configuration, installation and maintenance. SymmetrE also permits you to control many more points, while enabling you to access the full data-gathering capabilities of your controllers at your desk.
SymmetrE goes a quantum leap beyond traditional control by delivering cuttingedge data management applications. Its software helps you translate raw data into clear insights to help maximize facility performance and enhance your bottom line. SymmetrE provides:
Data collection in intervals from one second to one day
Standard and customized reports
Historical records of all event information and operator actions
Access to Internet and Intranet information without leaving the display
Trending capabilities
Ability to retrieve and analyze archived data
The Base Packages include the indicated point database, Excel 5000 Direct interface, LonWorks Interface, 1 Station, 4 Station Browsers, Quick Builder, Display Builder, Microsoft Excel Data Exchange, Network Server, Web Toolkit and 1 free interface from the drop-down list of Additional Free Interface in Section 3

Base Packages
Product description: SymmetrE Base Package 1 - 250 Point database


SYM-BASE02

Honeywell SymmetrE Building Management Workstation, R410

The SymmetrE building management system redefines what to expect from monitoring and control of your heating, ventilation and air conditioning equipment. The scalable, open SymmetrE system brings your buildings occupant needs, operational issues and budget pressures into perfect balance. You get an unparalleled solution that helps simplify facility management, boost productivity and reduce costs.
SymmetrE delivers an intelligent workstation with the full suite of tools you and your staff need. You can view and control subsystems, access and analyze data, manage equipment maintenance, see Intranet and Internet pages and generate graphs, charts and reports directly from your desktop.
You also benefit from a building management system thats truly open. SymmetrEs unique technology takes full advantage of leading open standards, permitting you to create an integrated system with transparent communications from third-party subsystems directly to SymmetrE.Theres no need for gateways, simplifying configuration, installation and maintenance. SymmetrE also permits you to control many more points, while enabling you to access the full data-gathering capabilities of your controllers at your desk.
SymmetrE goes a quantum leap beyond traditional control by delivering cuttingedge data management applications. Its software helps you translate raw data into clear insights to help maximize facility performance and enhance your bottom line. SymmetrE provides:
Data collection in intervals from one second to one day
Standard and customized reports
Historical records of all event information and operator actions
Access to Internet and Intranet information without leaving the display
Trending capabilities
Ability to retrieve and analyze archived data
The Base Packages include the indicated point database, Excel 5000 Direct interface, LonWorks Interface, 1 Station, 4 Station Browsers, Quick Builder, Display Builder, Microsoft Excel Data Exchange, Network Server, Web Toolkit and 1 free interface from the drop-down list of Additional Free Interface in Section 3

Base Packages
Product description: SymmetrE Base Package 1 - 500 Point database


SYM-BASE03

Honeywell SymmetrE Building Management Workstation, R410

The SymmetrE building management system redefines what to expect from monitoring and control of your heating, ventilation and air conditioning equipment. The scalable, open SymmetrE system brings your buildings occupant needs, operational issues and budget pressures into perfect balance. You get an unparalleled solution that helps simplify facility management, boost productivity and reduce costs.
SymmetrE delivers an intelligent workstation with the full suite of tools you and your staff need. You can view and control subsystems, access and analyze data, manage equipment maintenance, see Intranet and Internet pages and generate graphs, charts and reports directly from your desktop.
You also benefit from a building management system thats truly open. SymmetrEs unique technology takes full advantage of leading open standards, permitting you to create an integrated system with transparent communications from third-party subsystems directly to SymmetrE.Theres no need for gateways, simplifying configuration, installation and maintenance. SymmetrE also permits you to control many more points, while enabling you to access the full data-gathering capabilities of your controllers at your desk.
SymmetrE goes a quantum leap beyond traditional control by delivering cuttingedge data management applications. Its software helps you translate raw data into clear insights to help maximize facility performance and enhance your bottom line. SymmetrE provides:
Data collection in intervals from one second to one day
Standard and customized reports
Historical records of all event information and operator actions
Access to Internet and Intranet information without leaving the display
Trending capabilities
Ability to retrieve and analyze archived data
The Base Packages include the indicated point database, Excel 5000 Direct interface, LonWorks Interface, 1 Station, 4 Station Browsers, Quick Builder, Display Builder, Microsoft Excel Data Exchange, Network Server, Web Toolkit and 1 free interface from the drop-down list of Additional Free Interface in Section 3

Base Packages
Product description: SymmetrE Base Package 1 - 1000 Point database


SYM-DBP00250

Honeywell SymmetrE Building Management Workstation, R410

The SymmetrE building management system redefines what to expect from monitoring and control of your heating, ventilation and air conditioning equipment. The scalable, open SymmetrE system brings your buildings occupant needs, operational issues and budget pressures into perfect balance. You get an unparalleled solution that helps simplify facility management, boost productivity and reduce costs.
SymmetrE delivers an intelligent workstation with the full suite of tools you and your staff need. You can view and control subsystems, access and analyze data, manage equipment maintenance, see Intranet and Internet pages and generate graphs, charts and reports directly from your desktop.
You also benefit from a building management system thats truly open. SymmetrEs unique technology takes full advantage of leading open standards, permitting you to create an integrated system with transparent communications from third-party subsystems directly to SymmetrE.Theres no need for gateways, simplifying configuration, installation and maintenance. SymmetrE also permits you to control many more points, while enabling you to access the full data-gathering capabilities of your controllers at your desk.
SymmetrE goes a quantum leap beyond traditional control by delivering cuttingedge data management applications. Its software helps you translate raw data into clear insights to help maximize facility performance and enhance your bottom line. SymmetrE provides:
Data collection in intervals from one second to one day
Standard and customized reports
Historical records of all event information and operator actions
Access to Internet and Intranet information without leaving the display
Trending capabilities
Ability to retrieve and analyze archived data
The Base Packages include the indicated point database, Excel 5000 Direct interface, LonWorks Interface, 1 Station, 4 Station Browsers, Quick Builder, Display Builder, Microsoft Excel Data Exchange, Network Server, Web Toolkit and 1 free interface from the drop-down list of Additional Free Interface in Section 3

Database Expansion
Product description: 250 Point Adder to Database Size


SYM-IF-BACNET

Honeywell SymmetrE Building Management Workstation, R410

The SymmetrE building management system redefines what to expect from monitoring and control of your heating, ventilation and air conditioning equipment. The scalable, open SymmetrE system brings your buildings occupant needs, operational issues and budget pressures into perfect balance. You get an unparalleled solution that helps simplify facility management, boost productivity and reduce costs.
SymmetrE delivers an intelligent workstation with the full suite of tools you and your staff need. You can view and control subsystems, access and analyze data, manage equipment maintenance, see Intranet and Internet pages and generate graphs, charts and reports directly from your desktop.
You also benefit from a building management system thats truly open. SymmetrEs unique technology takes full advantage of leading open standards, permitting you to create an integrated system with transparent communications from third-party subsystems directly to SymmetrE.Theres no need for gateways, simplifying configuration, installation and maintenance. SymmetrE also permits you to control many more points, while enabling you to access the full data-gathering capabilities of your controllers at your desk.
SymmetrE goes a quantum leap beyond traditional control by delivering cuttingedge data management applications. Its software helps you translate raw data into clear insights to help maximize facility performance and enhance your bottom line. SymmetrE provides:
Data collection in intervals from one second to one day
Standard and customized reports
Historical records of all event information and operator actions
Access to Internet and Intranet information without leaving the display
Trending capabilities
Ability to retrieve and analyze archived data
The Base Packages include the indicated point database, Excel 5000 Direct interface, LonWorks Interface, 1 Station, 4 Station Browsers, Quick Builder, Display Builder, Microsoft Excel Data Exchange, Network Server, Web Toolkit and 1 free interface from the drop-down list of Additional Free Interface in Section 3

SymmetrE options
Product description: BACnet Client Interface


SYM-IF-MODBUS

Honeywell SymmetrE Building Management Workstation, R410

The SymmetrE building management system redefines what to expect from monitoring and control of your heating, ventilation and air conditioning equipment. The scalable, open SymmetrE system brings your buildings occupant needs, operational issues and budget pressures into perfect balance. You get an unparalleled solution that helps simplify facility management, boost productivity and reduce costs.
SymmetrE delivers an intelligent workstation with the full suite of tools you and your staff need. You can view and control subsystems, access and analyze data, manage equipment maintenance, see Intranet and Internet pages and generate graphs, charts and reports directly from your desktop.
You also benefit from a building management system thats truly open. SymmetrEs unique technology takes full advantage of leading open standards, permitting you to create an integrated system with transparent communications from third-party subsystems directly to SymmetrE.Theres no need for gateways, simplifying configuration, installation and maintenance. SymmetrE also permits you to control many more points, while enabling you to access the full data-gathering capabilities of your controllers at your desk.
SymmetrE goes a quantum leap beyond traditional control by delivering cuttingedge data management applications. Its software helps you translate raw data into clear insights to help maximize facility performance and enhance your bottom line. SymmetrE provides:
Data collection in intervals from one second to one day
Standard and customized reports
Historical records of all event information and operator actions
Access to Internet and Intranet information without leaving the display
Trending capabilities
Ability to retrieve and analyze archived data
The Base Packages include the indicated point database, Excel 5000 Direct interface, LonWorks Interface, 1 Station, 4 Station Browsers, Quick Builder, Display Builder, Microsoft Excel Data Exchange, Network Server, Web Toolkit and 1 free interface from the drop-down list of Additional Free Interface in Section 3

SymmetrE options
Product description: Modbus Interface


SYM-IF-OPCCL

Honeywell SymmetrE Building Management Workstation, R410

The SymmetrE building management system redefines what to expect from monitoring and control of your heating, ventilation and air conditioning equipment. The scalable, open SymmetrE system brings your buildings occupant needs, operational issues and budget pressures into perfect balance. You get an unparalleled solution that helps simplify facility management, boost productivity and reduce costs.
SymmetrE delivers an intelligent workstation with the full suite of tools you and your staff need. You can view and control subsystems, access and analyze data, manage equipment maintenance, see Intranet and Internet pages and generate graphs, charts and reports directly from your desktop.
You also benefit from a building management system thats truly open. SymmetrEs unique technology takes full advantage of leading open standards, permitting you to create an integrated system with transparent communications from third-party subsystems directly to SymmetrE.Theres no need for gateways, simplifying configuration, installation and maintenance. SymmetrE also permits you to control many more points, while enabling you to access the full data-gathering capabilities of your controllers at your desk.
SymmetrE goes a quantum leap beyond traditional control by delivering cuttingedge data management applications. Its software helps you translate raw data into clear insights to help maximize facility performance and enhance your bottom line. SymmetrE provides:
Data collection in intervals from one second to one day
Standard and customized reports
Historical records of all event information and operator actions
Access to Internet and Intranet information without leaving the display
Trending capabilities
Ability to retrieve and analyze archived data
The Base Packages include the indicated point database, Excel 5000 Direct interface, LonWorks Interface, 1 Station, 4 Station Browsers, Quick Builder, Display Builder, Microsoft Excel Data Exchange, Network Server, Web Toolkit and 1 free interface from the drop-down list of Additional Free Interface in Section 3

SymmetrE options
Product description: OPC Client Interface


SYM-IF-OVN

Honeywell SymmetrE Building Management Workstation, R410

The SymmetrE building management system redefines what to expect from monitoring and control of your heating, ventilation and air conditioning equipment. The scalable, open SymmetrE system brings your buildings occupant needs, operational issues and budget pressures into perfect balance. You get an unparalleled solution that helps simplify facility management, boost productivity and reduce costs.
SymmetrE delivers an intelligent workstation with the full suite of tools you and your staff need. You can view and control subsystems, access and analyze data, manage equipment maintenance, see Intranet and Internet pages and generate graphs, charts and reports directly from your desktop.
You also benefit from a building management system thats truly open. SymmetrEs unique technology takes full advantage of leading open standards, permitting you to create an integrated system with transparent communications from third-party subsystems directly to SymmetrE.Theres no need for gateways, simplifying configuration, installation and maintenance. SymmetrE also permits you to control many more points, while enabling you to access the full data-gathering capabilities of your controllers at your desk.
SymmetrE goes a quantum leap beyond traditional control by delivering cuttingedge data management applications. Its software helps you translate raw data into clear insights to help maximize facility performance and enhance your bottom line. SymmetrE provides:
Data collection in intervals from one second to one day
Standard and customized reports
Historical records of all event information and operator actions
Access to Internet and Intranet information without leaving the display
Trending capabilities
Ability to retrieve and analyze archived data
The Base Packages include the indicated point database, Excel 5000 Direct interface, LonWorks Interface, 1 Station, 4 Station Browsers, Quick Builder, Display Builder, Microsoft Excel Data Exchange, Network Server, Web Toolkit and 1 free interface from the drop-down list of Additional Free Interface in Section 3

SymmetrE options
Product description: OpenViewNet Interface


SYM-IFXL5DIRDIAL

Honeywell SymmetrE Building Management Workstation, R410

The SymmetrE building management system redefines what to expect from monitoring and control of your heating, ventilation and air conditioning equipment. The scalable, open SymmetrE system brings your buildings occupant needs, operational issues and budget pressures into perfect balance. You get an unparalleled solution that helps simplify facility management, boost productivity and reduce costs.
SymmetrE delivers an intelligent workstation with the full suite of tools you and your staff need. You can view and control subsystems, access and analyze data, manage equipment maintenance, see Intranet and Internet pages and generate graphs, charts and reports directly from your desktop.
You also benefit from a building management system thats truly open. SymmetrEs unique technology takes full advantage of leading open standards, permitting you to create an integrated system with transparent communications from third-party subsystems directly to SymmetrE.Theres no need for gateways, simplifying configuration, installation and maintenance. SymmetrE also permits you to control many more points, while enabling you to access the full data-gathering capabilities of your controllers at your desk.
SymmetrE goes a quantum leap beyond traditional control by delivering cuttingedge data management applications. Its software helps you translate raw data into clear insights to help maximize facility performance and enhance your bottom line. SymmetrE provides:
Data collection in intervals from one second to one day
Standard and customized reports
Historical records of all event information and operator actions
Access to Internet and Intranet information without leaving the display
Trending capabilities
Ability to retrieve and analyze archived data
The Base Packages include the indicated point database, Excel 5000 Direct interface, LonWorks Interface, 1 Station, 4 Station Browsers, Quick Builder, Display Builder, Microsoft Excel Data Exchange, Network Server, Web Toolkit and 1 free interface from the drop-down list of Additional Free Interface in Section 3

SymmetrE options
Product description: Excel 5000 Direct Dial-Up Interface


SYM-NW-MEDE

Honeywell SymmetrE Building Management Workstation, R410

The SymmetrE building management system redefines what to expect from monitoring and control of your heating, ventilation and air conditioning equipment. The scalable, open SymmetrE system brings your buildings occupant needs, operational issues and budget pressures into perfect balance. You get an unparalleled solution that helps simplify facility management, boost productivity and reduce costs.
SymmetrE delivers an intelligent workstation with the full suite of tools you and your staff need. You can view and control subsystems, access and analyze data, manage equipment maintenance, see Intranet and Internet pages and generate graphs, charts and reports directly from your desktop.
You also benefit from a building management system thats truly open. SymmetrEs unique technology takes full advantage of leading open standards, permitting you to create an integrated system with transparent communications from third-party subsystems directly to SymmetrE.Theres no need for gateways, simplifying configuration, installation and maintenance. SymmetrE also permits you to control many more points, while enabling you to access the full data-gathering capabilities of your controllers at your desk.
SymmetrE goes a quantum leap beyond traditional control by delivering cuttingedge data management applications. Its software helps you translate raw data into clear insights to help maximize facility performance and enhance your bottom line. SymmetrE provides:
Data collection in intervals from one second to one day
Standard and customized reports
Historical records of all event information and operator actions
Access to Internet and Intranet information without leaving the display
Trending capabilities
Ability to retrieve and analyze archived data
The Base Packages include the indicated point database, Excel 5000 Direct interface, LonWorks Interface, 1 Station, 4 Station Browsers, Quick Builder, Display Builder, Microsoft Excel Data Exchange, Network Server, Web Toolkit and 1 free interface from the drop-down list of Additional Free Interface in Section 3

SymmetrE options
Product description: Microsoft Excel Data Exchange


SYM-NW-OPCSERV

Honeywell SymmetrE Building Management Workstation, R410

The SymmetrE building management system redefines what to expect from monitoring and control of your heating, ventilation and air conditioning equipment. The scalable, open SymmetrE system brings your buildings occupant needs, operational issues and budget pressures into perfect balance. You get an unparalleled solution that helps simplify facility management, boost productivity and reduce costs.
SymmetrE delivers an intelligent workstation with the full suite of tools you and your staff need. You can view and control subsystems, access and analyze data, manage equipment maintenance, see Intranet and Internet pages and generate graphs, charts and reports directly from your desktop.
You also benefit from a building management system thats truly open. SymmetrEs unique technology takes full advantage of leading open standards, permitting you to create an integrated system with transparent communications from third-party subsystems directly to Symm